- Detect if a device was removed or replaced during system sleep so we
  don't assume a new device is the one that used to be there.  This uses
  Vendor/Device/Subsystem/Class/Revision and Device Serial Number (if
  implemented), so it's not fool-proof and drivers may know how to detect
  more cases (Lukas Wunner)

- Add missing MODULE_DESCRIPTION() macro (Jeff Johnson)

* pci/hotplug:
  PCI: acpiphp: Add missing MODULE_DESCRIPTION() macro
  PCI: pciehp: Detect device replacement during system sleep

- Disable AER and DPC during suspend so that if they share an interrupt
  with PME and errors occur during suspend, the AER or DPC interrupt
  doesn't cause spurious wakeups (Kai-Heng Feng)

* pci/err:
  PCI/DPC: Disable DPC service on suspend
  PCI/AER: Disable AER service on suspend

- Move the PRESERVE_BOOT_CONFIG ACPI _DSM evaluation from drivers/acpi to
  drivers/pci so we can unify with similar DT functionality (Vidya Sagar)

- Add of_pci_preserve_config() to check for a DT "linux,pci-probe-only"
  property on a per-host bridge basis in addition to a global basis (Vidya
  Sagar)

- Unify ACPI PRESERVE_BOOT_CONFIG _DSM and DT "linux,pci-probe-only" in a
  generic pci_preserve_config() path (Vidya Sagar)

* pci/enumeration:
  PCI: Use preserve_config in place of pci_flags
  PCI: Unify ACPI and DT 'preserve config' support
  PCI: of: Add of_pci_preserve_config() for per-host bridge support
  PCI: Move PRESERVE_BOOT_CONFIG _DSM evaluation to pci_register_host_bridge()

- If there's a device below a bridge, prevent a use-after-free by holding a
  reference to the device while waiting for the secondary bus to be ready
  in case the device is concurrently removed, e.g., by DPC (Lukas Wunner)

* pci/dpc:
  PCI/DPC: Fix use-after-free on concurrent DPC and hot-removal

- Add pcim_add_mapping_to_legacy_table() and
  pcim_remove_mapping_from_legacy_table() helper functions to simplify
  devres iomap table (Philipp Stanner)

- Reimplement devres that take a bit mask of BARs in a way that can be used
  to map partial BARs as well as entire BARs (Philipp Stanner)

- Deprecate pcim_iomap_table() and pcim_iomap_regions_request_all() in
  favor of pcim_* request plus pcim_* mapping (Philipp Stanner)

- Add pcim_request_region(), a managed interface to request a single BAR
  (Philipp Stanner)

- Use the existing pci_is_enabled() interface to replace the struct
  devres.enabled bit (Philipp Stanner)

- Move the struct pci_devres.pinned bit to struct pci_dev (Philipp Stanner)

- Reimplement pcim_set_mwi() so it uses its own devres cleanup callback
  instead of a special-purpose bit in struct pci_devres (Philipp Stanner)

- Add pcim_intx(), which is unambiguously managed, unlike pci_intx(), which
  is managed if pcim_enable_device() has been called but unmanaged
  otherwise (Philipp Stanner)

- Remove pcim_release(), which is no longer needed after previous cleanups
  of pcim_set_mwi() and pci_intx() (Philipp Stanner)

- Add pcim_iomap_range(), a managed interface to map part of a BAR (Philipp
  Stanner)

- Fix vboxvideo leak by using the new pcim_iomap_range() instead of the
  unmanaged pci_iomap_range() (Philipp Stanner)

* pci/devres:
  drm/vboxvideo: fix mapping leaks
  PCI: Add managed pcim_iomap_range()
  PCI: Remove legacy pcim_release()
  PCI: Add managed pcim_intx()
  PCI: Give pcim_set_mwi() its own devres cleanup callback
  PCI: Move struct pci_devres.pinned bit to struct pci_dev
  PCI: Remove struct pci_devres.enabled status bit
  PCI: Document hybrid devres hazards
  PCI: Add managed pcim_request_region()
  PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all()
  PCI: Add managed partial-BAR request and map infrastructure
  PCI: Add devres helpers for iomap table
  PCI: Add and use devres helper for bit masks

- Add ACS quirk for Broadcom BCM5760X NIC, which doesn't allow peer-to-peer
  transactions between functions, but doesn't advertise ACS support (Ajit
  Khaparde)

- Add "pci=config_acs=" kernel command-line parameter to relax default ACS
  settings to enable peer-to-peer configurations.  Requires expert
  knowledge of topology and ACS operation (Vidya Sagar)

* pci/acs:
  PCI: Extend ACS configurability
  PCI: Add ACS quirk for Broadcom BCM5760X NIC

PCIe ACS settings control the level of isolation and the possible P2P paths
between devices. With greater isolation the kernel will create smaller
iommu_groups and with less isolation there is more HW that can achieve P2P
transfers. From a virtualization perspective all devices in the same
iommu_group must be assigned to the same VM as they lack security
isolation.

There is no way for the kernel to automatically know the correct ACS
settings for any given system and workload. Existing command line options
(e.g., disable_acs_redir) allow only for large scale change, disabling all
isolation, but this is not sufficient for more complex cases.

Add a kernel command-line option 'config_acs' to directly control all the
ACS bits for specific devices, which allows the operator to setup the right
level of isolation to achieve the desired P2P configuration.  The
definition is future proof; when new ACS bits are added to the spec the
open syntax can be extended.

ACS needs to be setup early in the kernel boot as the ACS settings affect
how iommu_groups are formed. iommu_group formation is a one time event
during initial device discovery, so changing ACS bits after kernel boot can
result in an inaccurate view of the iommu_groups compared to the current
isolation configuration.

ACS applies to PCIe Downstream Ports and multi-function devices.  The
default ACS settings are strict and deny any direct traffic between two
functions. This results in the smallest iommu_group the HW can support.
Frequently these values result in slow or non-working P2PDMA.

ACS offers a range of security choices controlling how traffic is
allowed to go directly between two devices. Some popular choices:

  - Full prevention

  - Translated requests can be direct, with various options

  - Asymmetric direct traffic, A can reach B but not the reverse

  - All traffic can be direct

Along with some other less common ones for special topologies.

The intention is that this option would be used with expert knowledge of
the HW capability and workload to achieve the desired configuration.

Link: https://lore.kernel.org/r/20240625153150.159310-1-vidyas@nvidia.comSigned-off-by: Vidya Sagar <vidyas@nvidia.com>
[bhelgaas: add example, tidy printk formats]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

When the PCI devres API was introduced to this driver, it was wrongly
assumed that initializing the device with pcim_enable_device() instead of
pci_enable_device() will make all PCI functions managed.

This is wrong and was caused by the quite confusing PCI devres API in which
some, but not all, functions become managed that way.

The function pci_iomap_range() is never managed.

Replace pci_iomap_range() with the managed function pcim_iomap_range().

Fixes: 8558de40 ("drm/vboxvideo: use managed pci functions")
Link: https://lore.kernel.org/r/20240613115032.29098-14-pstanner@redhat.comSigned-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

The only managed mapping function currently is pcim_iomap() which doesn't
allow for mapping an area starting at a certain offset, which many drivers
want.

Add pcim_iomap_range() as an exported function.

Link: https://lore.kernel.org/r/20240613115032.29098-13-pstanner@redhat.comSigned-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Thanks to preceding cleanup steps, pcim_release() is now not needed
anymore and can be replaced by pcim_disable_device(), which is the exact
counterpart to pcim_enable_device().

This permits removing further parts of the old PCI devres implementation.

Replace pcim_release() with pcim_disable_device().  Remove the now unused
function get_pci_dr().  Remove the struct pci_devres from pci.h.

Link: https://lore.kernel.org/r/20240613115032.29098-12-pstanner@redhat.comSigned-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

pci_intx() is a "hybrid" function, i.e., it is managed if
pcim_enable_device() has been called, but unmanaged otherwise.

Add pcim_intx(), which is always managed, and implement pci_intx() using
it.

Remove the now-unused struct pci_devres.orig_intx and .restore_intx and
find_pci_dr().

Link: https://lore.kernel.org/r/20240613115032.29098-11-pstanner@redhat.comSigned-off-by: Philipp Stanner <pstanner@redhat.com>
[kwilczynski: squashed in
https://lore.kernel.org/r/426645d40776198e0fcc942f4a6cac4433c7a9aa.camel@redhat.com
to fix problem reported and tested by Ashish Kalra <Ashish.Kalra@amd.com>:
https://lore.kernel.org/r/20240708214656.4721-1-Ashish.Kalra@amd.com
https://lore.kernel.org/r/8c4634e9-4f02-4c54-9c89-d75e2f4bf026@amd.com/]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Managing pci_set_mwi() with devres can easily be done with its own
callback, without the necessity to store any state about it in a
device-related struct.

Remove the MWI state from struct pci_devres.  Give pcim_set_mwi() a
separate devres cleanup callback.

Link: https://lore.kernel.org/r/20240613115032.29098-10-pstanner@redhat.comSigned-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

The bit describing whether the PCI device is currently pinned is stored
in struct pci_devres. To clean up and simplify the PCI devres API, it's
better if this information is stored in struct pci_dev.

This will later permit simplifying pcim_enable_device().

Move the 'pinned' boolean bit to struct pci_dev.

Restructure bits in struct pci_dev so the pm / pme fields are next to
each other.

Link: https://lore.kernel.org/r/20240613115032.29098-9-pstanner@redhat.comSigned-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

The struct pci_devres has a separate boolean to track whether a device is
enabled. That, however, can easily be tracked in an agnostic manner through
the function pci_is_enabled().

Using it allows for simplifying the PCI devres implementation.

Replace the separate 'enabled' status bit from struct pci_devres with
calls to pci_is_enabled() at the appropriate places.

Link: https://lore.kernel.org/r/20240613115032.29098-8-pstanner@redhat.comSigned-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

These functions:

  pci_request_region()
  pci_request_regions()
  pci_request_regions_exclusive()
  pci_request_selected_regions()
  pci_request_selected_regions_exclusive()
  pci_intx()

are "hybrid" functions that are managed if pcim_enable_device() has been
called, but unmanaged otherwise.

This is confusing and has already caused a bug (in 8558de40
("drm/vboxvideo: use managed pci functions")) because users believe all PCI
functions, such as pci_iomap_range(), can become managed that way, which is
not the case.

Add comments to the relevant functions' docstrings that warn users about
this behavior.

Link: https://lore.kernel.org/r/20240613115032.29098-7-pstanner@redhat.comSigned-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

These existing functions:

  pci_request_region()
  pci_request_selected_regions()
  pci_request_selected_regions_exclusive()

are "hybrid" functions built on __pci_request_region() and are managed if
pcim_enable_device() has been called, but unmanaged otherwise.

Add these new functions:

  pcim_request_region()
  pcim_request_region_exclusive()

These are *always* managed and use the new pcim_addr_devres tracking
infrastructure instead of find_pci_dr() and struct pci_devres.region_mask.

Implement the hybrid functions using the new "pure" functions and remove
struct pci_devres.region_mask, which is no longer needed.

Link: https://lore.kernel.org/r/20240613115032.29098-6-pstanner@redhat.comSigned-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Deprecate pcim_iomap_table().  It returns a pointer to a table of
ioremapped BARs, or NULL if it fails.  This makes uses like this:

  addr = pcim_iomap_table(pdev)[0];

problematic because it causes a NULL pointer dereference on failure.
Callers should use pcim_iomap() instead.

Deprecate pcim_iomap_regions_request_all() because it is built on
__pci_request_region() and is managed if pcim_enable_device() has been
called, but unmanaged otherwise, which is prone to errors.

Callers should either use pcim_iomap_regions() to request and map BARs, or
use pcim_request_region() followed by pcim_iomap().

Link: https://lore.kernel.org/r/20240613115032.29098-5-pstanner@redhat.comSigned-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log, sphinx markup]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

The pcim_iomap_devres table tracks entire-BAR mappings, so we can't use it
to build a managed version of pci_iomap_range(), which maps partial BARs.

Add struct pcim_addr_devres, which can track request and mapping of both
entire BARs and partial BARs.

Add the following internal devres functions based on struct
pcim_addr_devres:

  pcim_iomap_region()               # request & map entire BAR
  pcim_iounmap_region()             # unmap & release entire BAR
  pcim_request_region()             # request entire BAR
  pcim_release_region()             # release entire BAR
  pcim_request_all_regions()        # request all entire BARs
  pcim_release_all_regions()        # release all entire BARs

Rework the following public interfaces using the new infrastructure
listed above:

  pcim_iomap()                      # map partial BAR
  pcim_iounmap()                    # unmap partial BAR
  pcim_iomap_regions()              # request & map specified BARs
  pcim_iomap_regions_request_all()  # request all BARs, map specified BARs
  pcim_iounmap_regions()            # unmap & release specified BARs

Link: https://lore.kernel.org/r/20240613115032.29098-4-pstanner@redhat.comSigned-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

The pcim_iomap_devres.table administrated by pcim_iomap_table() has its
entries set and unset at several places throughout devres.c using manual
iterations which are effectively code duplications.

Add pcim_add_mapping_to_legacy_table() and
pcim_remove_mapping_from_legacy_table() helper functions and use them where
possible.

Link: https://lore.kernel.org/r/20240613115032.29098-3-pstanner@redhat.comSigned-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

The current devres implementation uses manual shift operations to check
whether a bit in a mask is set. The code can be made more readable by
writing a small helper function for that.

Implement mask_contains_bar() and use it where applicable.

Link: https://lore.kernel.org/r/20240613115032.29098-2-pstanner@redhat.comSigned-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Keith reports a use-after-free when a DPC event occurs concurrently to
hot-removal of the same portion of the hierarchy:

The dpc_handler() awaits readiness of the secondary bus below the
Downstream Port where the DPC event occurred.  To do so, it polls the
config space of the first child device on the secondary bus.  If that
child device is concurrently removed, accesses to its struct pci_dev
cause the kernel to oops.

That's because pci_bridge_wait_for_secondary_bus() neglects to hold a
reference on the child device.  Before v6.3, the function was only
called on resume from system sleep or on runtime resume.  Holding a
reference wasn't necessary back then because the pciehp IRQ thread
could never run concurrently.  (On resume from system sleep, IRQs are
not enabled until after the resume_noirq phase.  And runtime resume is
always awaited before a PCI device is removed.)

However starting with v6.3, pci_bridge_wait_for_secondary_bus() is also
called on a DPC event.  Commit 53b54ad0 ("PCI/DPC: Await readiness
of secondary bus after reset"), which introduced that, failed to
appreciate that pci_bridge_wait_for_secondary_bus() now needs to hold a
reference on the child device because dpc_handler() and pciehp may
indeed run concurrently.  The commit was backported to v5.10+ stable
kernels, so that's the oldest one affected.

Add the missing reference acquisition.

Abridged stack trace:

  BUG: unable to handle page fault for address: 00000000091400c0
  CPU: 15 PID: 2464 Comm: irq/53-pcie-dpc 6.9.0
  RIP: pci_bus_read_config_dword+0x17/0x50
  pci_dev_wait()
  pci_bridge_wait_for_secondary_bus()
  dpc_reset_link()
  pcie_do_recovery()
  dpc_handler()

Fixes: 53b54ad0 ("PCI/DPC: Await readiness of secondary bus after reset")
Closes: https://lore.kernel.org/r/20240612181625.3604512-3-kbusch@meta.com/
Link: https://lore.kernel.org/linux-pci/8e4bcd4116fd94f592f2bf2749f168099c480ddf.1718707743.git.lukas@wunner.deReported-by: Keith Busch <kbusch@kernel.org>
Tested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org # v5.10+

If the link is powered off during suspend, electrical noise may cause
errors that trigger DPC.  If the DPC interrupt is enabled and shares an IRQ
with PME, that causes a spurious wakeup during suspend.

Disable DPC triggering and the DPC interrupt during suspend to prevent
this.  Clear DPC interrupt status before re-enabling DPC interrupts during
resume so we don't get an interrupt for errors that occurred during the
suspend/resume process.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=209149
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216295
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218090
Link: https://lore.kernel.org/r/20240416043225.1462548-3-kai.heng.feng@canonical.comSigned-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[bhelgaas: clear status on resume, add comments, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

If the link is powered off during suspend, electrical noise may cause
errors that are logged via AER.  If the AER interrupt is enabled and shares
an IRQ with PME, that causes a spurious wakeup during suspend.

Disable the AER interrupt during suspend to prevent this.  Clear error
status before re-enabling IRQ interrupts during resume so we don't get an
interrupt for errors that occurred during the suspend/resume process.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=209149
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216295
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218090
Link: https://lore.kernel.org/r/20240416043225.1462548-2-kai.heng.feng@canonical.comSigned-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[bhelgaas: drop pci_ancestor_pr3_present() etc, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:

  WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/hotplug/acpiphp_ampere_altra.o

Add the missing MODULE_DESCRIPTION().

Link: https://lore.kernel.org/r/20240612-md-drivers-pci-hotplug-v1-1-2b30d14d783d@quicinc.comSigned-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Use preserve_config in place of checking for PCI_PROBE_ONLY flag to enable
support for "linux,pci-probe-only" on a per host bridge basis.

This also obviates the use of adding PCI_REASSIGN_ALL_BUS flag if
!PCI_PROBE_ONLY, as pci_assign_unassigned_root_bus_resources() takes care
of reassigning the resources that are not already claimed.

Link: https://lore.kernel.org/r/20240508174138.3630283-5-vidyas@nvidia.comSigned-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Unify the 'preserve config' support across ACPI and device-tree
boot flows.

Link: https://lore.kernel.org/r/20240508174138.3630283-4-vidyas@nvidia.comSigned-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Add of_pci_preserve_config() to look for the "linux,pci-probe-only"
property under a specified node.  If it's not found there, look under
"of_chosen" in addition.

If the caller didn't specify a node, look under "of_chosen".

With a future patch, this will support "linux,pci-probe-only" on a per host
bridge basis based on the presence of the property in the respective PCI
host bridge DT node.

Implement of_pci_check_probe_only() using of_pci_preserve_config().

Link: https://lore.kernel.org/r/20240508174138.3630283-3-vidyas@nvidia.comSigned-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Move the PRESERVE_BOOT_CONFIG _DSM evaluation from acpi_pci_root_create()
to pci_register_host_bridge().

This will help unify the ACPI _DSM path and the DT-based
"linux,pci-probe-only" paths.

This should be safe because it happens earlier than it used to:

    acpi_pci_root_create
      pci_create_root_bus
        pci_register_host_bridge
  +       bridge->preserve_config = pci_preserve_config(bridge)
            pci_acpi_preserve_config
  +           acpi_evaluate_dsm_typed(DSM_PCI_PRESERVE_BOOT_CONFIG)
  -   acpi_evaluate_dsm_typed(DSM_PCI_PRESERVE_BOOT_CONFIG)

No functional change intended.

Link: https://lore.kernel.org/r/20240508174138.3630283-2-vidyas@nvidia.comSigned-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Ricky reports that replacing a device in a hotplug slot during ACPI sleep
state S3 does not cause re-enumeration on resume, as one would expect.
Instead, the new device is treated as if it was the old one.

There is no bulletproof way to detect device replacement, but as a
heuristic, check whether the device identity in config space matches cached
data in struct pci_dev (Vendor ID, Device ID, Class Code, Revision ID,
Subsystem Vendor ID, Subsystem ID).  Additionally, cache and compare the
Device Serial Number (PCIe r6.2 sec 7.9.3).  If a mismatch is detected,
mark the old device disconnected (to prevent its driver from accessing the
new device) and synthesize a Presence Detect Changed event.

The device identity in config space which is compared here is the same as
the one included in the signed Subject Alternative Name per PCIe r6.1 sec
6.31.3.  Thus, the present commit prevents attacks where a valid device is
replaced with a malicious device during system sleep and the valid device's
driver obliviously accesses the malicious device.

This is about as much as can be done at the PCI layer.  Drivers may have
additional ways to identify devices (such as reading a WWID from some
register) and may trigger re-enumeration when detecting an identity change
on resume.

Link: https://lore.kernel.org/r/a1afaa12f341d146ecbea27c1743661c71683833.1716992815.git.lukas@wunner.deReported-by: Ricky Wu <ricky_wu@realtek.com>
Closes: https://lore.kernel.org/r/a608b5930d0a48f092f717c0e137454b@realtek.comTested-by: Ricky Wu <ricky_wu@realtek.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

The Broadcom BCM5760X NIC may be a multi-function device.

While it does not advertise an ACS capability, peer-to-peer transactions
are not possible between the individual functions. So it is ok to treat
them as fully isolated.

Add an ACS quirk for this device so the functions can be in independent
IOMMU groups and attached individually to userspace applications using
VFIO.

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240510204228.73435-1-ajit.khaparde@broadcom.comSigned-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>

percpu.h depends on smp.h, but doesn't include it directly because of
circular header dependency issues; percpu.h is needed in a bunch of low
level headers.

This fixes a randconfig build error on mips:

  include/linux/alloc_tag.h: In function '__alloc_tag_ref_set':
  include/asm-generic/percpu.h:31:40: error: implicit declaration of function 'raw_smp_processor_id' [-Werror=implicit-function-declaration]
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 24e44cc2 ("mm: percpu: enable per-cpu allocation tagging")
Closes: https://lore.kernel.org/oe-kbuild-all/202405210052.DIrMXJNz-lkp@intel.com/Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tool fix from Arnaldo Carvalho de Melo:
 "Revert a patch causing a regression.

  This made a simple 'perf record -e cycles:pp make -j199' stop working
  on the Ampere ARM64 system Linus uses to test ARM64 kernels".

* tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"

This reverts commit 617824a7.

This made a simple 'perf record -e cycles:pp make -j199' stop working on
the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed
at length in the threads in the Link tags below.

The fix provided by Ian wasn't acceptable and work to fix this will take
time we don't have at this point, so lets revert this and work on it on
the next devel cycle.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Cc: Ethan Adams <j.ethan.adams@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tycho Andersen <tycho@tycho.pizza>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/lkml/CAHk-=wi5Ri=yR2jBVk-4HzTzpoAWOgstr1LEvg_-OXtJvXXJOA@mail.gmail.com
Link: https://lore.kernel.org/lkml/CAHk-=wiWvtFyedDNpoV7a8Fq_FpbB+F5KmWK2xPY3QoYseOf_A@mail.gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull smb client fixes from Steve French:

 - two important netfs integration fixes - including for a data
   corruption and also fixes for multiple xfstests

 - reenable swap support over SMB3

* tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix missing set of remote_i_size
  cifs: Fix smb3_insert_range() to move the zero_point
  cifs: update internal version number
  smb3: reenable swapfiles over SMB3 mounts

Merge tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "16 hotfixes, 11 of which are cc:stable.

  A few nilfs2 fixes, the remainder are for MM: a couple of selftests
  fixes, various singletons fixing various issues in various parts"

* tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/ksm: fix possible UAF of stable_node
  mm/memory-failure: fix handling of dissolved but not taken off from buddy pages
  mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again
  nilfs2: fix potential hang in nilfs_detach_log_writer()
  nilfs2: fix unexpected freezing of nilfs_segctor_sync()
  nilfs2: fix use-after-free of timer for log writer thread
  selftests/mm: fix build warnings on ppc64
  arm64: patching: fix handling of execmem addresses
  selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation
  selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages
  selftests/mm: compaction_test: fix bogus test success on Aarch64
  mailmap: update email address for Satya Priya
  mm/huge_memory: don't unpoison huge_zero_folio
  kasan, fortify: properly rename memintrinsics
  lib: add version into /proc/allocinfo output
  mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL

Pull irq fixes from Ingo Molnar:

 - Fix x86 IRQ vector leak caused by a CPU offlining race

 - Fix build failure in the riscv-imsic irqchip driver
   caused by an API-change semantic conflict

 - Fix use-after-free in irq_find_at_or_after()

* tag 'irq-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after()
  genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline
  irqchip/riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict

Pull x86 fixes from Ingo Molnar:

 - Fix regressions of the new x86 CPU VFM (vendor/family/model)
   enumeration/matching code

 - Fix crash kernel detection on buggy firmware with
   non-compliant ACPI MADT tables

 - Address Kconfig warning

* tag 'x86-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Fix x86_match_cpu() to match just X86_VENDOR_INTEL
  crypto: x86/aes-xts - switch to new Intel CPU model defines
  x86/topology: Handle bogus ACPI tables correctly
  x86/kconfig: Select ARCH_WANT_FRAME_POINTERS again when UNWINDER_FRAME_POINTER=y

Pull ipmi updates from Corey Minyard:
 "Mostly updates for deprecated interfaces, platform.remove and
  converting from a tasklet to a BH workqueue.

  Also use HAS_IOPORT for disabling inb()/outb()"

* tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmi:
  ipmi: kcs_bmc_npcm7xx: Convert to platform remove callback returning void
  ipmi: kcs_bmc_aspeed: Convert to platform remove callback returning void
  ipmi: ipmi_ssif: Convert to platform remove callback returning void
  ipmi: ipmi_si_platform: Convert to platform remove callback returning void
  ipmi: ipmi_powernv: Convert to platform remove callback returning void
  ipmi: bt-bmc: Convert to platform remove callback returning void
  char: ipmi: handle HAS_IOPORT dependencies
  ipmi: Convert from tasklet to BH workqueue

Pull ceph updates from Ilya Dryomov:
 "A series from Xiubo that adds support for additional access checks
  based on MDS auth caps which were recently made available to clients.

  This is needed to prevent scenarios where the MDS quietly discards
  updates that a UID-restricted client previously (wrongfully) acked to
  the user.

  Other than that, just a documentation fixup"

* tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-client:
  doc: ceph: update userspace command to get CephFS metadata
  ceph: add CEPHFS_FEATURE_MDS_AUTH_CAPS_CHECK feature bit
  ceph: check the cephx mds auth access for async dirop
  ceph: check the cephx mds auth access for open
  ceph: check the cephx mds auth access for setattr
  ceph: add ceph_mds_check_access() helper
  ceph: save cap_auths in MDS client when session is opened