- 15 Nov, 2023 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-11-13 (ice) This series contains updates to ice driver only. Arkadiusz ensures the device is initialized with valid lock status value. He also removes range checking of dpll priority to allow firmware to process the request; supported values are firmware dependent. Finally, he removes setting of can change capability for pins that cannot be changed. Dan restores ability to load a package which doesn't contain a signature segment. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: fix DDP package download for packages without signature segment ice: dpll: fix output pin capabilities ice: dpll: fix check for dpll input priority range ice: dpll: fix initial lock status of dpll ==================== Link: https://lore.kernel.org/r/20231113230551.548489-1-anthony.l.nguyen@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Shannon Nelson says: ==================== pds_core: fix irq index bug and compiler warnings The first patch fixes a bug in our interrupt masking where we used the wrong index. The second patch addresses a couple of kernel test robot string truncation warnings. ==================== Link: https://lore.kernel.org/r/20231113183257.71110-1-shannon.nelson@amd.comSigned-off-by:
-
Shannon Nelson authored
Our friendly kernel test robot pointed out a couple of potential string truncation issues. None of which were we worried about, but can be relatively easily fixed to quiet the complaints. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310211736.66syyDpp-lkp@intel.com/ Fixes: 45d76f49 ("pds_core: set up device and adminq") Signed-off-by:
Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20231113183257.71110-3-shannon.nelson@amd.comSigned-off-by:
-
Shannon Nelson authored
Use the qcq's interrupt index, not the irq number, to mask the interrupt. Since the irq number can be out of range from the number of possible interrupts, we can end up accessing and potentially scribbling on out-of-range and/or unmapped memory, making the kernel angry. [ 3116.039364] BUG: unable to handle page fault for address: ffffbeea1c3edf84 [ 3116.047059] #PF: supervisor write access in kernel mode [ 3116.052895] #PF: error_code(0x0002) - not-present page [ 3116.058636] PGD 100000067 P4D 100000067 PUD 1001f2067 PMD 10f82e067 PTE 0 [ 3116.066221] Oops: 0002 [#1] SMP NOPTI [ 3116.092948] RIP: 0010:iowrite32+0x9/0x76 [ 3116.190452] Call Trace: [ 3116.193185] <IRQ> [ 3116.195430] ? show_trace_log_lvl+0x1d6/0x2f9 [ 3116.200298] ? show_trace_log_lvl+0x1d6/0x2f9 [ 3116.205166] ? pdsc_adminq_isr+0x43/0x55 [pds_core] [ 3116.210618] ? __die_body.cold+0x8/0xa [ 3116.214806] ? page_fault_oops+0x16d/0x1ac [ 3116.219382] ? exc_page_fault+0xbe/0x13b [ 3116.223764] ? asm_exc_page_fault+0x22/0x27 [ 3116.228440] ? iowrite32+0x9/0x76 [ 3116.232143] pdsc_adminq_isr+0x43/0x55 [pds_core] [ 3116.237627] __handle_irq_event_percpu+0x3a/0x184 [ 3116.243088] handle_irq_event+0x57/0xb0 [ 3116.247575] handle_edge_irq+0x87/0x225 [ 3116.252062] __common_interrupt+0x3e/0xbc [ 3116.256740] common_interrupt+0x7b/0x98 [ 3116.261216] </IRQ> [ 3116.263745] <TASK> [ 3116.266268] asm_common_interrupt+0x22/0x27 Reported-by:Joao Martins <joao.m.martins@oracle.com> Fixes: 01ba61b5 ("pds_core: Add adminq processing and commands") Signed-off-by:
-
Alex Pakhunov authored
tg3_tso_bug() drops a packet if it cannot be segmented for any reason. The number of discarded frames should be incremented accordingly. Signed-off-by:
Alex Pakhunov <alexey.pakhunov@spacex.com> Signed-off-by:
Vincent Wong <vincent.wong2@spacex.com> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20231113182350.37472-2-alexey.pakhunov@spacex.comSigned-off-by:
-
Alex Pakhunov authored
This change moves [rt]x_dropped counters to tg3_napi so that they can be updated by a single writer, race-free. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231113182350.37472-1-alexey.pakhunov@spacex.comSigned-off-by:
-
Baruch Siach authored
dma_rx_size can be set as low as 64. Rx budget might be higher than that. Make sure to not overrun allocated rx buffers when budget is larger. Leave one descriptor unused to avoid wrap around of 'dirty_rx' vs 'cur_rx'. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Reviewed-by:
Serge Semin <fancer.lancer@gmail.com> Fixes: 47dd7a54 ("net: add support for STMicroelectronics Ethernet controllers.") Link: https://lore.kernel.org/r/d95413e44c97d4692e72cec13a75f894abeb6998.1699897370.git.baruch@tkos.co.ilSigned-off-by:
-
Baruch Siach authored
The while loop condition verifies 'count < limit'. Neither value change before the 'count >= limit' check. As is this check is dead code. But code inspection reveals a code path that modifies 'count' and then goto 'drain_data' and back to 'read_again'. So there is a need to verify count value sanity after 'read_again'. Move 'read_again' up to fix the count limit check. Fixes: ec222003 ("net: stmmac: Prepare to add Split Header support") Signed-off-by:
-
- 14 Nov, 2023 11 commits
-
-
Eric Dumazet authored
syzbot reported the following crash [1] After releasing unix socket lock, u->oob_skb can be changed by another thread. We must temporarily increase skb refcount to make sure this other thread will not free the skb under us. [1] BUG: KASAN: slab-use-after-free in unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866 Read of size 4 at addr ffff88801f3b9cc4 by task syz-executor107/5297 CPU: 1 PID: 5297 Comm: syz-executor107 Not tainted 6.6.0-syzkaller-15910-gb8e3a87a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0xc4/0x620 mm/kasan/report.c:475 kasan_report+0xda/0x110 mm/kasan/report.c:588 unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866 unix_stream_recv_urg net/unix/af_unix.c:2587 [inline] unix_stream_read_generic+0x19a5/0x2480 net/unix/af_unix.c:2666 unix_stream_recvmsg+0x189/0x1b0 net/unix/af_unix.c:2903 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg+0xe2/0x170 net/socket.c:1066 ____sys_recvmsg+0x21f/0x5c0 net/socket.c:2803 ___sys_recvmsg+0x115/0x1a0 net/socket.c:2845 __sys_recvmsg+0x114/0x1e0 net/socket.c:2875 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7fc67492c559 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fc6748ab228 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 000000000000001c RCX: 00007fc67492c559 RDX: 0000000040010083 RSI: 0000000020000140 RDI: 0000000000000004 RBP: 00007fc6749b6348 R08: 00007fc6748ab6c0 R09: 00007fc6748ab6c0 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc6749b6340 R13: 00007fc6749b634c R14: 00007ffe9fac52a0 R15: 00007ffe9fac5388 </TASK> Allocated by task 5295: kasan_save_stack+0x33/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x81/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x180/0x3c0 mm/slub.c:3523 __alloc_skb+0x287/0x330 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331 sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780 sock_alloc_send_skb include/net/sock.h:1884 [inline] queue_oob net/unix/af_unix.c:2147 [inline] unix_stream_sendmsg+0xb5f/0x10a0 net/unix/af_unix.c:2301 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Freed by task 5295: kasan_save_stack+0x33/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] ____kasan_slab_free+0x15b/0x1b0 mm/kasan/common.c:200 kasan_slab_free include/linux/kasan.h:164 [inline] slab_free_hook mm/slub.c:1800 [inline] slab_free_freelist_hook+0x114/0x1e0 mm/slub.c:1826 slab_free mm/slub.c:3809 [inline] kmem_cache_free+0xf8/0x340 mm/slub.c:3831 kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:1015 __kfree_skb net/core/skbuff.c:1073 [inline] consume_skb net/core/skbuff.c:1288 [inline] consume_skb+0xdf/0x170 net/core/skbuff.c:1282 queue_oob net/unix/af_unix.c:2178 [inline] unix_stream_sendmsg+0xd49/0x10a0 net/unix/af_unix.c:2301 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b The buggy address belongs to the object at ffff88801f3b9c80 which belongs to the cache skbuff_head_cache of size 240 The buggy address is located 68 bytes inside of freed 240-byte region [ffff88801f3b9c80, ffff88801f3b9d70) The buggy address belongs to the physical page: page:ffffea00007cee40 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1f3b9 flags: 0xfff00000000800(slab|node=0|zone=1|lastcpupid=0x7ff) page_type: 0xffffffff() raw: 00fff00000000800 ffff888142a60640 dead000000000122 0000000000000000 raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x12cc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY), pid 5299, tgid 5283 (syz-executor107), ts 103803840339, free_ts 103600093431 set_page_owner include/linux/page_owner.h:31 [inline] post_alloc_hook+0x2cf/0x340 mm/page_alloc.c:1537 prep_new_page mm/page_alloc.c:1544 [inline] get_page_from_freelist+0xa25/0x36c0 mm/page_alloc.c:3312 __alloc_pages+0x1d0/0x4a0 mm/page_alloc.c:4568 alloc_pages_mpol+0x258/0x5f0 mm/mempolicy.c:2133 alloc_slab_page mm/slub.c:1870 [inline] allocate_slab+0x251/0x380 mm/slub.c:2017 new_slab mm/slub.c:2070 [inline] ___slab_alloc+0x8c7/0x1580 mm/slub.c:3223 __slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3322 __slab_alloc_node mm/slub.c:3375 [inline] slab_alloc_node mm/slub.c:3468 [inline] kmem_cache_alloc_node+0x132/0x3c0 mm/slub.c:3523 __alloc_skb+0x287/0x330 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331 sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780 sock_alloc_send_skb include/net/sock.h:1884 [inline] queue_oob net/unix/af_unix.c:2147 [inline] unix_stream_sendmsg+0xb5f/0x10a0 net/unix/af_unix.c:2301 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1137 [inline] free_unref_page_prepare+0x4f8/0xa90 mm/page_alloc.c:2347 free_unref_page+0x33/0x3b0 mm/page_alloc.c:2487 __unfreeze_partials+0x21d/0x240 mm/slub.c:2655 qlink_free mm/kasan/quarantine.c:168 [inline] qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187 kasan_quarantine_reduce+0x18e/0x1d0 mm/kasan/quarantine.c:294 __kasan_slab_alloc+0x65/0x90 mm/kasan/common.c:305 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3478 [inline] slab_alloc mm/slub.c:3486 [inline] __kmem_cache_alloc_lru mm/slub.c:3493 [inline] kmem_cache_alloc+0x15d/0x380 mm/slub.c:3502 vm_area_dup+0x21/0x2f0 kernel/fork.c:500 __split_vma+0x17d/0x1070 mm/mmap.c:2365 split_vma mm/mmap.c:2437 [inline] vma_modify+0x25d/0x450 mm/mmap.c:2472 vma_modify_flags include/linux/mm.h:3271 [inline] mprotect_fixup+0x228/0xc80 mm/mprotect.c:635 do_mprotect_pkey+0x852/0xd60 mm/mprotect.c:809 __do_sys_mprotect mm/mprotect.c:830 [inline] __se_sys_mprotect mm/mprotect.c:827 [inline] __x64_sys_mprotect+0x78/0xb0 mm/mprotect.c:827 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Memory state around the buggy address: ffff88801f3b9b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88801f3b9c00: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc >ffff88801f3b9c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88801f3b9d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc ffff88801f3b9d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb Fixes: 876c14ad ("af_unix: fix holding spinlock in oob handling") Reported-and-tested-by: syzbot+7a2d546fa43e49315ed3@syzkaller.appspotmail.com Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Rao Shoaib <rao.shoaib@oracle.com> Reviewed-by:
Rao shoaib <rao.shoaib@oracle.com> Link: https://lore.kernel.org/r/20231113134938.168151-1-edumazet@google.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
ChunHao Lin says: ==================== r8169: fix DASH devices network lost issue This series are used to fix network lost issue on systems that support DASH. It has been tested on rtl8168ep and rtl8168fp. ==================== Link: https://lore.kernel.org/r/20231109173400.4573-1-hau@realtek.comSigned-off-by:
-
ChunHao Lin authored
Device that support DASH may be reseted or powered off during suspend. So driver needs to handle DASH during system suspend and resume. Or DASH firmware will influence device behavior and causes network lost. Fixes: b646d900 ("r8169: magic.") Cc: stable@vger.kernel.org Reviewed-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
ChunHao Lin <hau@realtek.com> Link: https://lore.kernel.org/r/20231109173400.4573-3-hau@realtek.comSigned-off-by:
-
ChunHao Lin authored
For devices that support DASH, even DASH is disabled, there may still exist a default firmware that will influence device behavior. So driver needs to handle DASH for devices that support DASH, no matter the DASH status is. This patch also prepares for "fix network lost after resume on DASH systems". Fixes: ee7a1beb ("r8169:call "rtl8168_driver_start" "rtl8168_driver_stop" only when hardware dash function is enabled") Cc: stable@vger.kernel.org Signed-off-by:
-
Jakub Kicinski authored
Linus Walleij says: ==================== Fix large frames in the Gemini ethernet driver This is the result of a bug hunt for a problem with the RTL8366RB DSA switch leading me wrong all over the place. I am indebted to Vladimir Oltean who as usual pointed out where the real problem was, many thanks! Tryig to actually use big ("jumbo") frames on this hardware uncovered the real bugs. Then I tested it on the DSA switch and it indeed fixes the issue. To make sure it also works fine with big frames on non-DSA devices I also copied a large video file over scp to a device with maximum frame size, the data was transported in large TCP packets ending up in 0x7ff sized frames using software checksumming at ~2.0 MB/s. If I set down the MTU to the standard 1500 bytes so that hardware checksumming is used, the scp transfer of the same file was slightly lower, ~1.8-1.9 MB/s. Despite this not being the best test it shows that we can now stress the hardware with large frames and that software checksum works fine. v3: https://lore.kernel.org/r/20231107-gemini-largeframe-fix-v3-0-e3803c080b75@linaro.org v2: https://lore.kernel.org/r/20231105-gemini-largeframe-fix-v2-0-cd3a5aa6c496@linaro.org v1: https://lore.kernel.org/r/20231104-gemini-largeframe-fix-v1-0-9c5513f22f33@linaro.org ==================== Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-0-6e611528db08@linaro.orgSigned-off-by: -
Linus Walleij authored
The RX max frame size is over 10000 for the Gemini ethernet, but the TX max frame size is actually just 2047 (0x7ff after checking the datasheet). Reflect this in what we offer to Linux, cap the MTU at the TX max frame minus ethernet headers. We delete the code disabling the hardware checksum for large MTUs as netdev->mtu can no longer be larger than netdev->max_mtu meaning the if()-clause in gmac_fix_features() is never true. Fixes: 4d5ae32f ("net: ethernet: Add a driver for Gemini gigabit ethernet") Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-3-6e611528db08@linaro.orgSigned-off-by:
-
Linus Walleij authored
The Gemini ethernet controller provides hardware checksumming for frames up to 1514 bytes including ethernet headers but not FCS. If we start sending bigger frames (after first bumping up the MTU on both interfaces sending and receiving the frames), truncated packets start to appear on the target such as in this tcpdump resulting from ping -s 1474: 23:34:17.241983 14:d6:4d:a8:3c:4f (oui Unknown) > bc:ae:c5:6b:a8:3d (oui Unknown), ethertype IPv4 (0x0800), length 1514: truncated-ip - 2 bytes missing! (tos 0x0, ttl 64, id 32653, offset 0, flags [DF], proto ICMP (1), length 1502) OpenWrt.lan > Fecusia: ICMP echo request, id 1672, seq 50, length 1482 If we bypass the hardware checksumming and provide a software fallback, everything starts working fine up to the max TX MTU of 2047 bytes, for example ping -s2000 192.168.1.2: 00:44:29.587598 bc:ae:c5:6b:a8:3d (oui Unknown) > 14:d6:4d:a8:3c:4f (oui Unknown), ethertype IPv4 (0x0800), length 2042: (tos 0x0, ttl 64, id 51828, offset 0, flags [none], proto ICMP (1), length 2028) Fecusia > OpenWrt.lan: ICMP echo reply, id 1683, seq 4, length 2008 The bit enabling to bypass hardware checksum (or any of the "TSS" bits) are undocumented in the hardware reference manual. The entire hardware checksum unit appears undocumented. The conclusion that we need to use the "bypass" bit was found by trial-and-error. Since no hardware checksum will happen, we slot in a software checksum fallback. Check for the condition where we need to compute checksum on the skb with either hardware or software using == CHECKSUM_PARTIAL instead of != CHECKSUM_NONE which is an incomplete check according to <linux/skbuff.h>. On the D-Link DIR-685 router this fixes a bug on the conduit interface to the RTL8366RB DSA switch: as the switch needs to add space for its tag it increases the MTU on the conduit interface to 1504 and that means that when the router sends packages of 1500 bytes these get an extra 4 bytes of DSA tag and the transfer fails because of the erroneous hardware checksumming, affecting such basic functionality as the LuCI web interface. Fixes: 4d5ae32f ("net: ethernet: Add a driver for Gemini gigabit ethernet") Signed-off-by:
-
Linus Walleij authored
Enumerator 3 is 1548 bytes according to the datasheet. Not 1542. Fixes: 4d5ae32f ("net: ethernet: Add a driver for Gemini gigabit ethernet") Reviewed-by:
-
Eric Dumazet authored
Commit 9eed321c ("net: lapbether: only support ethernet devices") has been able to keep syzbot away from net/lapb, until today. In the following splat [1], the issue is that a lapbether device has been created on a bonding device without members. Then adding a non ARPHRD_ETHER member forced the bonding master to change its type. The fix is to make sure we call dev_close() in bond_setup_by_slave() so that the potential linked lapbether devices (or any other devices having assumptions on the physical device) are removed. A similar bug has been addressed in commit 40baec22 ("bonding: fix panic on non-ARPHRD_ETHER enslave failure") [1] skbuff: skb_under_panic: text:ffff800089508810 len:44 put:40 head:ffff0000c78e7c00 data:ffff0000c78e7bea tail:0x16 end:0x140 dev:bond0 kernel BUG at net/core/skbuff.c:192 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6007 Comm: syz-executor383 Not tainted 6.6.0-rc3-syzkaller-gbf6547d8715b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:188 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 lr : skb_panic net/core/skbuff.c:188 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 sp : ffff800096a06aa0 x29: ffff800096a06ab0 x28: ffff800096a06ba0 x27: dfff800000000000 x26: ffff0000ce9b9b50 x25: 0000000000000016 x24: ffff0000c78e7bea x23: ffff0000c78e7c00 x22: 000000000000002c x21: 0000000000000140 x20: 0000000000000028 x19: ffff800089508810 x18: ffff800096a06100 x17: 0000000000000000 x16: ffff80008a629a3c x15: 0000000000000001 x14: 1fffe00036837a32 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000201 x10: 0000000000000000 x9 : cb50b496c519aa00 x8 : cb50b496c519aa00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff800096a063b8 x4 : ffff80008e280f80 x3 : ffff8000805ad11c x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086 Call trace: skb_panic net/core/skbuff.c:188 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 skb_push+0xf0/0x108 net/core/skbuff.c:2446 ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1384 dev_hard_header include/linux/netdevice.h:3136 [inline] lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149 lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251 __lapb_disconnect_request+0x9c/0x17c net/lapb/lapb_iface.c:326 lapb_device_event+0x288/0x4e0 net/lapb/lapb_iface.c:492 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1970 [inline] call_netdevice_notifiers_extack net/core/dev.c:2008 [inline] call_netdevice_notifiers net/core/dev.c:2022 [inline] __dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508 dev_close_many+0x1e0/0x470 net/core/dev.c:1559 dev_close+0x174/0x250 net/core/dev.c:1585 lapbeth_device_event+0x2e4/0x958 drivers/net/wan/lapbether.c:466 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1970 [inline] call_netdevice_notifiers_extack net/core/dev.c:2008 [inline] call_netdevice_notifiers net/core/dev.c:2022 [inline] __dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508 dev_close_many+0x1e0/0x470 net/core/dev.c:1559 dev_close+0x174/0x250 net/core/dev.c:1585 bond_enslave+0x2298/0x30cc drivers/net/bonding/bond_main.c:2332 bond_do_ioctl+0x268/0xc64 drivers/net/bonding/bond_main.c:4539 dev_ifsioc+0x754/0x9ac dev_ioctl+0x4d8/0xd34 net/core/dev_ioctl.c:786 sock_do_ioctl+0x1d4/0x2d0 net/socket.c:1217 sock_ioctl+0x4e8/0x834 net/socket.c:1322 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl fs/ioctl.c:857 [inline] __arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:857 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155 el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: aa1803e6 aa1903e7 a90023f5 94785b8b (d4210000) Fixes: 872254dd ("net/bonding: Enable bonding to enslave non ARPHRD_ETHER") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20231109180102.4085183-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
As I was working on a syzbot report, I found that KCSAN would probably complain that reading q->head or q->tail without barriers could lead to invalid results. Add corresponding READ_ONCE() and WRITE_ONCE() to avoid load-store tearing. Fixes: d94ba80e ("ptp: Added a brand new class driver for ptp clocks.") Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20231109174859.3995880-1-edumazet@google.comSigned-off-by:
-
Jakub Kicinski authored
This reverts commit 8a4f030d. Richard says: The test itself is harmless, but keeping it will make people think, "oh this pointer can be invalid." In fact the core stack ensures that ioctl() can't be invoked after release(), otherwise Bad Stuff happens. Fixes: 8a4f030d ("ptp: Fixes a null pointer dereference in ptp_ioctl") Link: https://lore.kernel.org/all/ZVAf_qdRfDAQYUt-@hoboy.vegasvil.org/Signed-off-by:
-
- 13 Nov, 2023 18 commits
-
-
Dan Nowlin authored
Commit 3cbdb034 ("ice: Add support for E830 DDP package segment") incorrectly removed support for package download for packages without a signature segment. These packages include the signature buffer inline in the configurations buffers, and not in a signature segment. Fix package download by providing download support for both packages with (ice_download_pkg_with_sig_seg()) and without signature segment (ice_download_pkg_without_sig_seg()). Fixes: 3cbdb034 ("ice: Add support for E830 DDP package segment") Reported-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Closes: https://lore.kernel.org/netdev/ZUT50a94kk2pMGKb@boxer/Tested-by:
Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
Dan Nowlin <dan.nowlin@intel.com> Signed-off-by:
Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by:
Simon Horman <horms@kernel.org> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Arkadiusz Kubalewski authored
The dpll output pins which are used to feed clock signal of PHY and MAC circuits cannot be disconnected, those integrated circuits require clock signal for operation. By stopping assignment of DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE pin capability, prevent the user from invoking the state set callback on those pins, setting the state on those pins already returns error, as firmware doesn't allow the change of their state. Fixes: d7999f5e ("ice: implement dpll interface to control cgu") Fixes: 8a3a565f ("ice: add admin commands to access cgu configuration") Reviewed-by:
Andrii Staikov <andrii.staikov@intel.com> Signed-off-by:
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by:
-
Arkadiusz Kubalewski authored
Supported priority value for input pins may differ with regard of NIC firmware version. E810T NICs with 3.20/4.00 FW versions would accept priority range 0-31, where firmware 4.10+ would support the range 0-9 and extra value of 255. Remove the in-range check as the driver has no information on supported values from the running firmware, let firmware decide if given value is correct and return extack error if the value is not supported. Fixes: d7999f5e ("ice: implement dpll interface to control cgu") Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by:
-
Arkadiusz Kubalewski authored
When dpll device is registered and dpll subsystem performs notify of a new device, the lock state value provided to dpll subsystem equals 0 which is invalid value for the `enum dpll_lock_status`. Provide correct value by obtaining it from firmware before registering the dpll device. Fixes: d7999f5e ("ice: implement dpll interface to control cgu") Signed-off-by:
Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by:
-
Willem de Bruijn authored
ppp_sync_ioctl allows setting device MRU, but does not sanity check this input. Limit to a sane upper bound of 64KB. No implementation I could find generates larger than 64KB frames. RFC 2823 mentions an upper bound of PPP over SDL of 64KB based on the 16-bit length field. Other protocols will be smaller, such as PPPoE (9KB jumbo frame) and PPPoA (18190 maximum CPCS-SDU size, RFC 2364). PPTP and L2TP encapsulate in IP. Syzbot managed to trigger alloc warning in __alloc_pages: if (WARN_ON_ONCE_GFP(order > MAX_ORDER, gfp)) WARNING: CPU: 1 PID: 37 at mm/page_alloc.c:4544 __alloc_pages+0x3ab/0x4a0 mm/page_alloc.c:4544 __alloc_skb+0x12b/0x330 net/core/skbuff.c:651 __netdev_alloc_skb+0x72/0x3f0 net/core/skbuff.c:715 netdev_alloc_skb include/linux/skbuff.h:3225 [inline] dev_alloc_skb include/linux/skbuff.h:3238 [inline] ppp_sync_input drivers/net/ppp/ppp_synctty.c:669 [inline] ppp_sync_receive+0xff/0x680 drivers/net/ppp/ppp_synctty.c:334 tty_ldisc_receive_buf+0x14c/0x180 drivers/tty/tty_buffer.c:390 tty_port_default_receive_buf+0x70/0xb0 drivers/tty/tty_port.c:37 receive_buf drivers/tty/tty_buffer.c:444 [inline] flush_to_ldisc+0x261/0x780 drivers/tty/tty_buffer.c:494 process_one_work+0x884/0x15c0 kernel/workqueue.c:2630 With call ioctl$PPPIOCSMRU1(r1, 0x40047452, &(0x7f0000000100)=0x5e6417a8) Similar code exists in other drivers that implement ppp_channel_ops ioctl PPPIOCSMRU. Those might also be in scope. Notably excluded from this are pppol2tp_ioctl and pppoe_ioctl. This code goes back to the start of git history. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+6177e1f90d92583bcc58@syzkaller.appspotmail.com Signed-off-by:Willem de Bruijn <willemb@google.com> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
Sven Auhagen authored
Calling page_pool_get_stats in the mvneta driver without checks leads to kernel crashes. First the page pool is only available if the bm is not used. The page pool is also not allocated when the port is stopped. It can also be not allocated in case of errors. The current implementation leads to the following crash calling ethstats on a port that is down or when calling it at the wrong moment: ble to handle kernel NULL pointer dereference at virtual address 00000070 [00000070] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Hardware name: Marvell Armada 380/385 (Device Tree) PC is at page_pool_get_stats+0x18/0x1cc LR is at mvneta_ethtool_get_stats+0xa0/0xe0 [mvneta] pc : [<c0b413cc>] lr : [<bf0a98d8>] psr: a0000013 sp : f1439d48 ip : f1439dc0 fp : 0000001d r10: 00000100 r9 : c4816b80 r8 : f0d75150 r7 : bf0b400c r6 : c238f000 r5 : 00000000 r4 : f1439d68 r3 : c2091040 r2 : ffffffd8 r1 : f1439d68 r0 : 00000000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 066b004a DAC: 00000051 Register r0 information: NULL pointer Register r1 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Register r2 information: non-paged memory Register r3 information: slab kmalloc-2k start c2091000 pointer offset 64 size 2048 Register r4 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Register r5 information: NULL pointer Register r6 information: slab kmalloc-cg-4k start c238f000 pointer offset 0 size 4096 Register r7 information: 15-page vmalloc region starting at 0xbf0a8000 allocated at load_module+0xa30/0x219c Register r8 information: 1-page vmalloc region starting at 0xf0d75000 allocated at ethtool_get_stats+0x138/0x208 Register r9 information: slab task_struct start c4816b80 pointer offset 0 Register r10 information: non-paged memory Register r11 information: non-paged memory Register r12 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Process snmpd (pid: 733, stack limit = 0x38de3a88) Stack: (0xf1439d48 to 0xf143a000) 9d40: 000000c0 00000001 c238f000 bf0b400c f0d75150 c4816b80 9d60: 00000100 bf0a98d8 00000000 00000000 00000000 00000000 00000000 00000000 9d80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9da0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9dc0: 00000dc0 5335509c 00000035 c238f000 bf0b2214 01067f50 f0d75000 c0b9b9c8 9de0: 0000001d 00000035 c2212094 5335509c c4816b80 c238f000 c5ad6e00 01067f50 9e00: c1b0be80 c4816b80 00014813 c0b9d7f0 00000000 00000000 0000001d 0000001d 9e20: 00000000 00001200 00000000 00000000 c216ed90 c73943b8 00000000 00000000 9e40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9e60: 00000000 c0ad9034 00000000 00000000 00000000 00000000 00000000 00000000 9e80: 00000000 00000000 00000000 5335509c c1b0be80 f1439ee4 00008946 c1b0be80 9ea0: 01067f50 f1439ee3 00000000 00000046 b6d77ae0 c0b383f0 00008946 becc83e8 9ec0: c1b0be80 00000051 0000000b c68ca480 c7172d00 c0ad8ff0 f1439ee3 cf600e40 9ee0: 01600e40 32687465 00000000 00000000 00000000 01067f50 00000000 00000000 9f00: 00000000 5335509c 00008946 00008946 00000000 c68ca480 becc83e8 c05e2de0 9f20: f1439fb0 c03002f0 00000006 5ac3c35a c4816b80 00000006 b6d77ae0 c030caf0 9f40: c4817350 00000014 f1439e1c 0000000c 00000000 00000051 01000000 00000014 9f60: 00003fec f1439edc 00000001 c0372abc b6d77ae0 c0372abc cf600e40 5335509c 9f80: c21e6800 01015c9c 0000000b 00008946 00000036 c03002f0 c4816b80 00000036 9fa0: b6d77ae0 c03000c0 01015c9c 0000000b 0000000b 00008946 becc83e8 00000000 9fc0: 01015c9c 0000000b 00008946 00000036 00000035 010678a0 b6d797ec b6d77ae0 9fe0: b6dbf738 becc838c b6d186d7 b6baa858 40000030 0000000b 00000000 00000000 page_pool_get_stats from mvneta_ethtool_get_stats+0xa0/0xe0 [mvneta] mvneta_ethtool_get_stats [mvneta] from ethtool_get_stats+0x154/0x208 ethtool_get_stats from dev_ethtool+0xf48/0x2480 dev_ethtool from dev_ioctl+0x538/0x63c dev_ioctl from sock_ioctl+0x49c/0x53c sock_ioctl from sys_ioctl+0x134/0xbd8 sys_ioctl from ret_fast_syscall+0x0/0x1c Exception stack(0xf1439fa8 to 0xf1439ff0) 9fa0: 01015c9c 0000000b 0000000b 00008946 becc83e8 00000000 9fc0: 01015c9c 0000000b 00008946 00000036 00000035 010678a0 b6d797ec b6d77ae0 9fe0: b6dbf738 becc838c b6d186d7 b6baa858 Code: e28dd004 e1a05000 e2514000 0a00006a (e5902070) This commit adds the proper checks before calling page_pool_get_stats. Fixes: b3fc7922 ("net: mvneta: add support for page_pool_get_stats") Signed-off-by:
Sven Auhagen <sven.auhagen@voleatech.de> Reported-by:
Paulo Da Silva <Paulo.DaSilva@kyberna.com> Acked-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Shigeru Yoshida authored
KMSAN reported the following kernel-infoleak issue: ===================================================== BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x4ec/0x2bc0 lib/iov_iter.c:186 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x4ec/0x2bc0 lib/iov_iter.c:186 copy_to_iter include/linux/uio.h:197 [inline] simple_copy_to_iter net/core/datagram.c:532 [inline] __skb_datagram_iter.5+0x148/0xe30 net/core/datagram.c:420 skb_copy_datagram_iter+0x52/0x210 net/core/datagram.c:546 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline] netlink_recvmsg+0x43d/0x1630 net/netlink/af_netlink.c:1967 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg net/socket.c:1066 [inline] __sys_recvfrom+0x476/0x860 net/socket.c:2246 __do_sys_recvfrom net/socket.c:2264 [inline] __se_sys_recvfrom net/socket.c:2260 [inline] __x64_sys_recvfrom+0x130/0x200 net/socket.c:2260 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook+0x103/0x9e0 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5f7/0xb50 mm/slub.c:3523 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x2fd/0x770 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1286 [inline] tipc_tlv_alloc net/tipc/netlink_compat.c:156 [inline] tipc_get_err_tlv+0x90/0x5d0 net/tipc/netlink_compat.c:170 tipc_nl_compat_recv+0x1042/0x15d0 net/tipc/netlink_compat.c:1324 genl_family_rcv_msg_doit net/netlink/genetlink.c:972 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline] genl_rcv_msg+0x1220/0x12c0 net/netlink/genetlink.c:1067 netlink_rcv_skb+0x4a4/0x6a0 net/netlink/af_netlink.c:2545 genl_rcv+0x41/0x60 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline] netlink_unicast+0xf4b/0x1230 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x1242/0x1420 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x997/0xd60 net/socket.c:2588 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2642 __sys_sendmsg net/socket.c:2671 [inline] __do_sys_sendmsg net/socket.c:2680 [inline] __se_sys_sendmsg net/socket.c:2678 [inline] __x64_sys_sendmsg+0x2fa/0x4a0 net/socket.c:2678 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Bytes 34-35 of 36 are uninitialized Memory access of size 36 starts at ffff88802d464a00 Data copied to user address 00007ff55033c0a0 CPU: 0 PID: 30322 Comm: syz-executor.0 Not tainted 6.6.0-14500-g1c410411 #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014 ===================================================== tipc_add_tlv() puts TLV descriptor and value onto `skb`. This size is calculated with TLV_SPACE() macro. It adds the size of struct tlv_desc and the length of TLV value passed as an argument, and aligns the result to a multiple of TLV_ALIGNTO, i.e., a multiple of 4 bytes. If the size of struct tlv_desc plus the length of TLV value is not aligned, the current implementation leaves the remaining bytes uninitialized. This is the cause of the above kernel-infoleak issue. This patch resolves this issue by clearing data up to an aligned size. Fixes: d0796d1e ("tipc: convert legacy nl bearer dump to nl compat") Signed-off-by:
Shigeru Yoshida <syoshida@redhat.com> Reviewed-by:
-
Willem de Bruijn authored
The test allocs a single page to hold all the frag_list skbs. This is insufficient on kernels with CONFIG_MAX_SKB_FRAGS=45, due to the increased skb_shared_info frags[] array length. gso_test_func: ASSERTION FAILED at net/core/gso_test.c:210 Expected alloc_size <= ((1UL) << 12), but alloc_size == 5075 (0x13d3) ((1UL) << 12) == 4096 (0x1000) Simplify the logic. Just allocate a page for each frag_list skb. Fixes: 4688ecb1 ("net: expand skb_segment unit test with frag_list coverage") Signed-off-by: -
Marek Behún authored
The quotes symbol in "EEE "link partner ability 1 should be at the end of the register name "EEE link partner ability 1" Signed-off-by:
Marek Behún <kabel@kernel.org> Reviewed-by:
-
MD Danish Anwar authored
Add record for TI Industrial Communication Subsystem - Gigabit (ICSSG) Ethernet driver. Also add Roger and myself as maintainer. Signed-off-by:
MD Danish Anwar <danishanwar@ti.com> Signed-off-by:
-
David S. Miller authored
Jijie Shao says: ==================== There are some bugfix for the HNS3 ethernet driver There are some bugfix for the HNS3 ethernet driver --- ChangeLog: v1 -> v2: - net: hns3: fix add VLAN fail issue, net: hns3: fix VF reset fail issue are modified suggested by Paolo v1: https://lore.kernel.org/all/20231028025917.314305-1-shaojijie@huawei.com/ ==================== Signed-off-by: -
Jijie Shao authored
If PF is down, firmware will returns 10 Mbit/s rate and half-duplex mode when PF queries the port information from firmware. After imp reset command is executed, PF status changes to down, and PF will query link status and updates port information from firmware in a periodic scheduled task. However, there is a low probability that port information is updated when PF is down, and then PF link status changes to up. In this case, PF synchronizes incorrect rate and duplex mode to VF. This patch fixes it by updating port information before PF synchronizes the rate and duplex to the VF when PF changes to up. Fixes: 18b6e31f ("net: hns3: PF add support for pushing link status to VFs") Signed-off-by:
Jijie Shao <shaojijie@huawei.com> Signed-off-by:
-
Jijie Shao authored
Currently the reset process in hns3 and firmware watchdog init process is asynchronous. We think firmware watchdog initialization is completed before VF clear the interrupt source. However, firmware initialization may not complete early. So VF will receive multiple reset interrupts and fail to reset. So we add delay before VF interrupt source and 5 ms delay is enough to avoid second reset interrupt. Fixes: 427900d2 ("net: hns3: fix the timing issue of VF clearing interrupt sources") Signed-off-by:
-
Yonglong Liu authored
When a VF is calling hns3_init_mac_addr(), get_mac_addr() may return fail, then the value of mac_addr_temp is not initialized. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
-
Yonglong Liu authored
The hns3 driver define an array of string to show the coalesce info, but if the kernel adds a new mode or a new state, out-of-bounds access may occur when coalesce info is read via debugfs, this patch fix the problem. Fixes: c99fead7 ("net: hns3: add debugfs support for interrupt coalesce") Signed-off-by:
-
Jian Shen authored
Currently, the FEC capability bit is default set for device version V2. It's incorrect for the copper port. Eventhough it doesn't make the nic work abnormal, but the capability information display in debugfs may confuse user. So clear it when driver get the port type inforamtion. Fixes: 433ccce8 ("net: hns3: use FEC capability queried from firmware") Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
-
Yonglong Liu authored
In hclgevf_mbx_handler() and hclgevf_get_mbx_resp() functions, there is a typical store-store and load-load scenario between received_resp and additional_info. This patch adds barrier to fix the problem. Fixes: 4671042f ("net: hns3: add match_id to check mailbox response from PF to VF") Signed-off-by:
-
Jian Shen authored
The hclge_sync_vlan_filter is called in periodic task, trying to remove VLAN from vlan_del_fail_bmap. It can be concurrence with VLAN adding operation from user. So once user failed to delete a VLAN id, and add it again soon, it may be removed by the periodic task, which may cause the software configuration being inconsistent with hardware. So add mutex handling to avoid this. user hns3 driver periodic task │ add vlan 10 ───── hns3_vlan_rx_add_vid │ │ (suppose success) │ │ │ del vlan 10 ───── hns3_vlan_rx_kill_vid │ │ (suppose fail,add to │ │ vlan_del_fail_bmap) │ │ │ add vlan 10 ───── hns3_vlan_rx_add_vid │ (suppose success) │ foreach vlan_del_fail_bmp del vlan 10 Fixes: fe4144d4 ("net: hns3: sync VLAN filter entries when kill VLAN ID failed") Signed-off-by:
-
- 11 Nov, 2023 2 commits
-
-
Jan Kiszka authored
We were just continuing in this case, surely not desired. Fixes: 128d5874 ("net: ti: icssg-prueth: Add ICSSG ethernet driver") Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by:
Roger Quadros <rogerq@kernel.org> Signed-off-by:
-
Jan Kiszka authored
Analogously to prueth_remove, just also taking care for NULL'ing the iep pointers. Fixes: 186734c1 ("net: ti: icssg-prueth: add packet timestamping and ptp support") Fixes: 443a2367 ("net: ti: icssg-prueth: am65x SR2.0 add 10M full duplex support") Signed-off-by:
-
- 10 Nov, 2023 1 commit
-
-
Shigeru Yoshida authored
KMSAN reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in ppp_sync_input drivers/net/ppp/ppp_synctty.c:690 [inline] BUG: KMSAN: uninit-value in ppp_sync_receive+0xdc9/0xe70 drivers/net/ppp/ppp_synctty.c:334 ppp_sync_input drivers/net/ppp/ppp_synctty.c:690 [inline] ppp_sync_receive+0xdc9/0xe70 drivers/net/ppp/ppp_synctty.c:334 tiocsti+0x328/0x450 drivers/tty/tty_io.c:2295 tty_ioctl+0x808/0x1920 drivers/tty/tty_io.c:2694 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl+0x211/0x400 fs/ioctl.c:857 __x64_sys_ioctl+0x97/0xe0 fs/ioctl.c:857 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: __alloc_pages+0x75d/0xe80 mm/page_alloc.c:4591 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] __page_frag_cache_refill+0x9a/0x2c0 mm/page_alloc.c:4691 page_frag_alloc_align+0x91/0x5d0 mm/page_alloc.c:4722 page_frag_alloc include/linux/gfp.h:322 [inline] __netdev_alloc_skb+0x215/0x6d0 net/core/skbuff.c:728 netdev_alloc_skb include/linux/skbuff.h:3225 [inline] dev_alloc_skb include/linux/skbuff.h:3238 [inline] ppp_sync_input drivers/net/ppp/ppp_synctty.c:669 [inline] ppp_sync_receive+0x237/0xe70 drivers/net/ppp/ppp_synctty.c:334 tiocsti+0x328/0x450 drivers/tty/tty_io.c:2295 tty_ioctl+0x808/0x1920 drivers/tty/tty_io.c:2694 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl+0x211/0x400 fs/ioctl.c:857 __x64_sys_ioctl+0x97/0xe0 fs/ioctl.c:857 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b CPU: 0 PID: 12950 Comm: syz-executor.1 Not tainted 6.6.0-14500-g1c410411 #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014 ===================================================== ppp_sync_input() checks the first 2 bytes of the data are PPP_ALLSTATIONS and PPP_UI. However, if the data length is 1 and the first byte is PPP_ALLSTATIONS, an access to an uninitialized value occurs when checking PPP_UI. This patch resolves this issue by checking the data length. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
