- Some headers graduated from the blacklist

 - hyperv_timer.h joined the header-test when CONFIG_X86=y

 - nf_tables*.h joined the header-test when CONFIG_NF_TABLES is
   enabled.

 - The entry for nf_tables_offload.h was added to fix build error for
   the combination of CONFIG_NF_TABLES=n and CONFIG_KERNEL_HEADER_TEST=y.

 - The entry for iomap.h was added because this header is supposed to
   be included only when CONFIG_BLOCK=y
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Currently, *.mod is created as a side-effect of obj-m.

Split out *.mod as a dedicated build rule, which allows to unify
the %.c -> %.o rule, and remove the single-used-m rule.

This also makes the incremental build of allmodconfig faster because
it saves $(NM) invocation when there is no change in the module.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Now that there is no rule for 'prepare1', it can go away.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The current format of *.mod is like this:

  line 1: directory path to the .ko file
  line 2: a list of objects linked into this module
  line 3: unresolved symbols (only when CONFIG_TRIM_UNUSED_KSYMS=y)

Now that *.mod and *.ko are created in the same directory, the line 1
provides no valuable information. It can be derived by replacing the
extension .mod with .ko. In fact, nobody uses the first line any more.

Cut down the first line.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

While descending directories, Kbuild produces objects for modules,
but do not link final *.ko files; it is done in the modpost.

To keep track of modules, Kbuild creates a *.mod file in $(MODVERDIR)
for every module it is building. Some post-processing steps read the
necessary information from *.mod files. This avoids descending into
directories again. This mechanism was introduced in 2003 or so.

Later, commit 551559e1 ("kbuild: implement modules.order") added
modules.order. So, we can simply read it out to know all the modules
with directory paths. This is easier than parsing the first line of
*.mod files.

$(MODVERDIR) has a flat directory structure, that is, *.mod files
are named only with base names. This is based on the assumption that
the module name is unique across the tree. This assumption is really
fragile.

Stephen Rothwell reported a race condition caused by a module name
conflict:

  https://lkml.org/lkml/2019/5/13/991

In parallel building, two different threads could write to the same
$(MODVERDIR)/*.mod simultaneously.

Non-unique module names are the source of all kind of troubles, hence
commit 3a48a919 ("kbuild: check uniqueness of module names")
introduced a new checker script.

However, it is still fragile in the build system point of view because
this race happens before scripts/modules-check.sh is invoked. If it
happens again, the modpost will emit unclear error messages.

To fix this issue completely, create *.mod with full directory path
so that two threads never attempt to write to the same file.

$(MODVERDIR) is no longer needed.

Since modules with directory paths are listed in modules.order, Kbuild
is still able to find *.mod files without additional descending.

I also killed cmd_secanalysis; scripts/mod/sumversion.c computes MD4 hash
for modules with MODULE_VERSION(). When CONFIG_DEBUG_SECTION_MISMATCH=y,
it occurs not only in the modpost stage, but also during directory
descending, where sumversion.c may parse stale *.mod files. It would emit
'No such file or directory' warning when an object consisting a module is
renamed, or when a single-obj module is turned into a multi-obj module or
vice versa.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>

Towards the goal of removing MODVERDIR aka .tmp_versions, read out
modules.order to get the list of modules to be processed. This is
simpler than parsing *.mod files in .tmp_versions.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Towards the goal of removing MODVERDIR, read out modules.order to get
the list of modules to be processed. This is simpler than parsing *.mod
files in $(MODVERDIR).

For external modules, $(KBUILD_EXTMOD)/modules.order should be read.

I removed the single target %.ko from the top Makefile. To make sure
modpost works correctly, vmlinux and the other modules must be built.
You cannot build a particular .ko file alone.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Towards the goal of removing MODVERDIR, read out modules.order to get
the list of modules to be signed. This is simpler than parsing *.mod
files in $(MODVERDIR).

The modules_sign target is only supported for in-kernel modules.
So, this commit does not take care of external modules.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Towards the goal of removing MODVERDIR, read out modules.order to get
the list of modules to be installed. This is simpler than parsing *.mod
files in $(MODVERDIR).

For external modules, $(KBUILD_EXTMOD)/modules.order should be read.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Nothing depends on this, so it is dead code.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Currently, only the top-level modules.order drops duplicated entries.

The modules.order files in sub-directories potentially contain
duplication. To list out the paths of all modules, I want to use
modules.order instead of parsing *.mod files in $(MODVERDIR).

To achieve this, I want to rip off duplication from modules.order
of external modules too.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Removing the 'kernel/' prefix will make our life easier because we can
simply do 'cat modules.order' to get all built modules with full paths.

Currently, we parse the first line of '*.mod' files in $(MODVERDIR).
Since we have duplicated functionality here, I plan to remove MODVERDIR
entirely.

In fact, modules.order is generated also for external modules in a
broken format. It adds the 'kernel/' prefix to the absolute path of
the module, like this:

  kernel//path/to/your/external/module/foo.ko

This is fine for now since modules.order is not used for external
modules. However, I want to sanitize the format everywhere towards
the goal of removing MODVERDIR.

We cannot change the format of installed module.{order,builtin}.
So, 'make modules_install' will add the 'kernel/' prefix while copying
them to $(MODLIB)/.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Currently, $(objtree)/modules.order is touched in two places.

In the 'prepare0' rule, scripts/Makefile.build creates an empty
modules.order while processing 'obj=.'

In the 'modules' rule, the top-level Makefile overwrites it with
the correct list of modules.

While this might be a good side-effect that modules.order is made
empty every time (probably this is not intended functionality),
I personally do not like this behavior.

Create modules.order only when it is sensible to do so.

This avoids creating the following pointless files:

  scripts/basic/modules.order
  scripts/dtc/modules.order
  scripts/gcc-plugins/modules.order
  scripts/genksyms/modules.order
  scripts/mod/modules.order
  scripts/modules.order
  scripts/selinux/genheaders/modules.order
  scripts/selinux/mdp/modules.order
  scripts/selinux/modules.order

Going forward, $(objtree)/modules.order lists the modules that
was built in the last successful build.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Use recently introduced devm_platform_ioremap_resource
helper which wraps platform_get_resource() and
devm_ioremap_resource() together. This helps produce much
cleaner code and remove local `struct resource` declaration.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

It will be useful to control the header-test by a tristate option.

If CONFIG_FOO is a tristate option, you can write like this:

  header-test-$(CONFIG_FOO) += foo.h
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

We can re-add this whenever it is needed. At this moment, it is unused.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

It takes somewhat long time to generate these tag files.
Keep such precious files until we run 'make distclean'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

As commit 1e022137 ("mips: vdso: drop unnecessary cc-ldoption")
explained, these flags are supported by the minimal required version
of binutils. They are supported by ld.lld too.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>

The assembler files in the kernel are *.S instead of *.s, so they must
be preprocessed. Since 'as' of GNU binutils is not able to preprocess,
we always use $(CC) as an assembler driver.

$(AS) is almost unused in Kbuild. As of v5.2, there is just one place
that directly invokes $(AS).

  $ git grep -e '$(AS)' -e '${AS}' -e '$AS' -e '$(AS:' -e '${AS:' -- :^Documentation
  drivers/net/wan/Makefile:  AS68K = $(AS)

The documentation about *_AFLAGS* sounds like the flags were passed
to $(AS). This is somewhat misleading.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>

Since commit 00c864f8 ("kconfig: allow all config targets to write
auto.conf if missing"), Kconfig creates include/config/auto.conf in the
defconfig stage when it is missing.

Joonas Kylmälä reported incorrect auto.conf generation under some
circumstances.

To reproduce it, apply the following diff:

|  --- a/arch/arm/configs/imx_v6_v7_defconfig
|  +++ b/arch/arm/configs/imx_v6_v7_defconfig
|  @@ -345,14 +345,7 @@ CONFIG_USB_CONFIGFS_F_MIDI=y
|   CONFIG_USB_CONFIGFS_F_HID=y
|   CONFIG_USB_CONFIGFS_F_UVC=y
|   CONFIG_USB_CONFIGFS_F_PRINTER=y
|  -CONFIG_USB_ZERO=m
|  -CONFIG_USB_AUDIO=m
|  -CONFIG_USB_ETH=m
|  -CONFIG_USB_G_NCM=m
|  -CONFIG_USB_GADGETFS=m
|  -CONFIG_USB_FUNCTIONFS=m
|  -CONFIG_USB_MASS_STORAGE=m
|  -CONFIG_USB_G_SERIAL=m
|  +CONFIG_USB_FUNCTIONFS=y
|   CONFIG_MMC=y
|   CONFIG_MMC_SDHCI=y
|   CONFIG_MMC_SDHCI_PLTFM=y

And then, run:

$ make ARCH=arm mrproper imx_v6_v7_defconfig

You will see CONFIG_USB_FUNCTIONFS=y is correctly contained in the
.config, but not in the auto.conf.

Please note drivers/usb/gadget/legacy/Kconfig is included from a choice
block in drivers/usb/gadget/Kconfig. So USB_FUNCTIONFS is a choice value.

This is probably a similar situation described in commit beaaddb6
("kconfig: tests: test defconfig when two choices interact").

When sym_calc_choice() is called, the choice symbol forgets the
SYMBOL_DEF_USER unless all of its choice values are explicitly set by
the user.

The choice symbol is given just one chance to recall it because
set_all_choice_values() is called if SYMBOL_NEED_SET_CHOICE_VALUES
is set.

When sym_calc_choice() is called again, the choice symbol forgets it
forever, since SYMBOL_NEED_SET_CHOICE_VALUES is a one-time aid.
Hence, we cannot call sym_clear_all_valid() again and again.

It is crazy to repeat set and unset of internal flags. However, we
cannot simply get rid of "sym->flags &= flags | ~SYMBOL_DEF_USER;"
Doing so would re-introduce the problem solved by commit 5d09598d
("kconfig: fix new choices being skipped upon config update").

To work around the issue, conf_write_autoconf() stopped calling
sym_clear_all_valid().

conf_write() must be changed accordingly. Currently, it clears
SYMBOL_WRITE after the symbol is written into the .config file. This
is needed to prevent it from writing the same symbol multiple times in
case the symbol is declared in two or more locations. I added the new
flag SYMBOL_WRITTEN, to track the symbols that have been written.

Anyway, this is a cheesy workaround in order to suppress the issue
as far as defconfig is concerned.

Handling of choices is totally broken. sym_clear_all_valid() is called
every time a user touches a symbol from the GUI interface. To reproduce
it, just add a new symbol drivers/usb/gadget/legacy/Kconfig, then touch
around unrelated symbols from menuconfig. USB_FUNCTIONFS will disappear
from the .config file.

I added the Fixes tag since it is more fatal than before. But, this
has been broken since long long time before, and still it is.
We should take a closer look to fix this correctly somehow.

Fixes: 00c864f8 ("kconfig: allow all config targets to write auto.conf if missing")
Cc: linux-stable <stable@vger.kernel.org> # 4.19+
Reported-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Joonas Kylmälä <joonas.kylmala@iki.fi>

Debian-based distributions place libc header files in a machine
specific directory (/usr/include/<libc-machine>) instead of
/usr/include/asm to support installation of the linux-libc-dev
package from multiple architectures. Move headers installed by
"make headers_install" accordingly using Debian's tuple from
dpkg-architecture (stored in debian/arch).
Signed-off-by: Cedric Hombourger <Cedric_Hombourger@mentor.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

'make olddefconfig' is non-interactive, so we can drop 'yes'.
The behavior is equivalent.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The top level Makefile adds -Wall globally:

  KBUILD_CFLAGS   := -Wall -Wundef -Werror=strict-prototypes -Wno-trigraphs \

For riscv, I see two "-Wall" added for compiling each object.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

<generated/ti-emif-asm-offsets.h> is only generated and included
by drivers/memory/, so it does not need to reside in the globally
visible include/generated/.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>

Pull more block updates from Jens Axboe:
 "A later pull request with some followup items. I had some vacation
  coming up to the merge window, so certain things items were delayed a
  bit. This pull request also contains fixes that came in within the
  last few days of the merge window, which I didn't want to push right
  before sending you a pull request.

  This contains:

   - NVMe pull request, mostly fixes, but also a few minor items on the
     feature side that were timing constrained (Christoph et al)

   - Report zones fixes (Damien)

   - Removal of dead code (Damien)

   - Turn on cgroup psi memstall (Josef)

   - block cgroup MAINTAINERS entry (Konstantin)

   - Flush init fix (Josef)

   - blk-throttle low iops timing fix (Konstantin)

   - nbd resize fixes (Mike)

   - nbd 0 blocksize crash fix (Xiubo)

   - block integrity error leak fix (Wenwen)

   - blk-cgroup writeback and priority inheritance fixes (Tejun)"

* tag 'for-linus-20190715' of git://git.kernel.dk/linux-block: (42 commits)
  MAINTAINERS: add entry for block io cgroup
  null_blk: fixup ->report_zones() for !CONFIG_BLK_DEV_ZONED
  block: Limit zone array allocation size
  sd_zbc: Fix report zones buffer allocation
  block: Kill gfp_t argument of blkdev_report_zones()
  block: Allow mapping of vmalloc-ed buffers
  block/bio-integrity: fix a memory leak bug
  nvme: fix NULL deref for fabrics options
  nbd: add netlink reconfigure resize support
  nbd: fix crash when the blksize is zero
  block: Disable write plugging for zoned block devices
  block: Fix elevator name declaration
  block: Remove unused definitions
  nvme: fix regression upon hot device removal and insertion
  blk-throttle: fix zero wait time for iops throttled group
  block: Fix potential overflow in blk_report_zones()
  blkcg: implement REQ_CGROUP_PUNT
  blkcg, writeback: Implement wbc_blkcg_css()
  blkcg, writeback: Add wbc->no_cgroup_owner
  blkcg, writeback: Rename wbc_account_io() to wbc_account_cgroup_owner()
  ...

Pull i2c updates from Wolfram Sang:
 "New stuff from the I2C world:

   - in the core, getting irqs from ACPI is now similar to OF

   - new driver for MediaTek MT7621/7628/7688 SoCs

   - bcm2835, i801, and tegra drivers got some more attention

   - GPIO API cleanups

   - cleanups in the core headers

   - lots of usual driver updates"

* 'i2c/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (74 commits)
  i2c: mt7621: Fix platform_no_drv_owner.cocci warnings
  i2c: cpm: remove casting dma_alloc
  dt-bindings: i2c: sun6i-p2wi: Fix the binding example
  dt-bindings: i2c: mv64xxx: Fix the example compatible
  i2c: i801: Documentation update
  i2c: i801: Add support for Intel Tiger Lake
  i2c: i801: Fix PCI ID sorting
  dt-bindings: i2c-stm32: document optional dmas
  i2c: i2c-stm32f7: Add I2C_SMBUS_I2C_BLOCK_DATA support
  i2c: core: Tidy up handling of init_irq
  i2c: core: Move ACPI gpio IRQ handling into i2c_acpi_get_irq
  i2c: core: Move ACPI IRQ handling to probe time
  i2c: acpi: Factor out getting the IRQ from ACPI
  i2c: acpi: Use available IRQ helper functions
  i2c: core: Allow whole core to use i2c_dev_irq_from_resources
  eeprom: at24: modify a comment referring to platform data
  dt-bindings: i2c: omap: Add new compatible for J721E SoCs
  dt-bindings: i2c: mv64xxx: Add YAML schemas
  dt-bindings: i2c: sun6i-p2wi: Add YAML schemas
  i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
  ...

Pull power supply and reset updates from Sebastian Reichel:
 "Core:
   - add HWMON compat layer
   - new properties:
       - input power limit
       - input voltage limit

  Drivers:
   - qcom-pon: add gen2 support
   - new driver for storing reboot move in NVMEM
   - new driver for Wilco EC charger configuration
   - simplify getting the adapter of a client"

* tag 'for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: reset: nvmem-reboot-mode: add CONFIG_OF dependency
  power_supply: wilco_ec: Add charging config driver
  power: supply: cros: allow to set input voltage and current limit
  power: supply: add input power and voltage limit properties
  power: supply: fix semicolon.cocci warnings
  power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write interface
  dt-bindings: power: reset: add document for NVMEM based reboot-mode
  reset: qcom-pon: Add support for gen2 pon
  dt-bindings: power: reset: qcom: Add qcom,pm8998-pon compatibility line
  power: supply: Add HWMON compatibility layer
  power: supply: sbs-manager: simplify getting the adapter of a client
  power: supply: rt9455_charger: simplify getting the adapter of a client
  power: supply: rt5033_battery: simplify getting the adapter of a client
  power: supply: max17042_battery: simplify getting the adapter of a client
  power: supply: max17040_battery: simplify getting the adapter of a client
  power: supply: max14656_charger_detector: simplify getting the adapter of a client
  power: supply: bq25890_charger: simplify getting the adapter of a client
  power: supply: bq24257_charger: simplify getting the adapter of a client
  power: supply: bq24190_charger: simplify getting the adapter of a client

Pull PCI updates from Bjorn Helgaas:
 "Enumeration changes:

   - Evaluate PCI Boot Configuration _DSM to learn if firmware wants us
     to preserve its resource assignments (Benjamin Herrenschmidt)

   - Simplify resource distribution (Nicholas Johnson)

   - Decode 32 GT/s link speed (Gustavo Pimentel)

  Virtualization:

   - Fix incorrect caching of VF config space size (Alex Williamson)

   - Fix VF driver probing sysfs knobs (Alex Williamson)

  Peer-to-peer DMA:

   - Fix dma_virt_ops check (Logan Gunthorpe)

  Altera host bridge driver:

   - Allow building as module (Ley Foon Tan)

  Armada 8K host bridge driver:

   - add PHYs support (Miquel Raynal)

  DesignWare host bridge driver:

   - Export APIs to support removable loadable module (Vidya Sagar)

   - Enable Relaxed Ordering erratum workaround only on Tegra20 &
     Tegra30 (Vidya Sagar)

  Hyper-V host bridge driver:

   - Fix use-after-free in eject (Dexuan Cui)

  Mobiveil host bridge driver:

   - Clean up and fix many issues, including non-identify mapped
     windows, 64-bit windows, multi-MSI, class code, INTx clearing (Hou
     Zhiqiang)

  Qualcomm host bridge driver:

   - Use clk bulk API for 2.4.0 controllers (Bjorn Andersson)

   - Add QCS404 support (Bjorn Andersson)

   - Assert PERST for at least 100ms (Niklas Cassel)

  R-Car host bridge driver:

   - Add r8a774a1 DT support (Biju Das)

  Tegra host bridge driver:

   - Add support for Gen2, opportunistic UpdateFC and ACK (PCIe protocol
     details) AER, GPIO-based PERST# (Manikanta Maddireddy)

   - Fix many issues, including power-on failure cases, interrupt
     masking in suspend, UPHY settings, AFI dynamic clock gating,
     pending DLL transactions (Manikanta Maddireddy)

  Xilinx host bridge driver:

   - Fix NWL Multi-MSI programming (Bharat Kumar Gogada)

  Endpoint support:

   - Fix 64bit BAR support (Alan Mikhak)

   - Fix pcitest build issues (Alan Mikhak, Andy Shevchenko)

  Bug fixes:

   - Fix NVIDIA GPU multi-function power dependencies (Abhishek Sahu)

   - Fix NVIDIA GPU HDA enablement issue (Lukas Wunner)

   - Ignore lockdep for sysfs "remove" (Marek Vasut)

  Misc:

   - Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)"

* tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits)
  PCI: Enable NVIDIA HDA controllers
  tools: PCI: Fix installation when `make tools/pci_install`
  PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB
  PCI: Fix typos and whitespace errors
  PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr()
  PCI: mobiveil: Fix infinite-loop in the INTx handling function
  PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine
  PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window
  PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window
  PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup
  PCI: mobiveil: Clear the control fields before updating it
  PCI: mobiveil: Add configured inbound windows counter
  PCI: mobiveil: Fix the valid check for inbound and outbound windows
  PCI: mobiveil: Clean-up program_{ib/ob}_windows()
  PCI: mobiveil: Remove an unnecessary return value check
  PCI: mobiveil: Fix error return values
  PCI: mobiveil: Refactor the MEM/IO outbound window initialization
  PCI: mobiveil: Make some register updates more readable
  PCI: mobiveil: Reformat the code for readability
  dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional
  ...

Pull rdma updates from Jason Gunthorpe:
 "A smaller cycle this time. Notably we see another new driver, 'Soft
  iWarp', and the deletion of an ancient unused driver for nes.

   - Revise and simplify the signature offload RDMA MR APIs

   - More progress on hoisting object allocation boiler plate code out
     of the drivers

   - Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib,
     i40iw

   - Tree wide cleanups: struct_size, put_user_page, xarray, rst doc
     conversion

   - Removal of obsolete ib_ucm chardev and nes driver

   - netlink based discovery of chardevs and autoloading of the modules
     providing them

   - Move more of the rdamvt/hfi1 uapi to include/uapi/rdma

   - New driver 'siw' for software based iWarp running on top of netdev,
     much like rxe's software RoCE.

   - mlx5 feature to report events in their raw devx format to userspace

   - Expose per-object counters through rdma tool

   - Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core
     from netdev"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits)
  RMDA/siw: Require a 64 bit arch
  RDMA/siw: Mark expected switch fall-throughs
  RDMA/core: Fix -Wunused-const-variable warnings
  rdma/siw: Remove set but not used variable 's'
  rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS
  RDMA/siw: Add missing rtnl_lock around access to ifa
  rdma/siw: Use proper enumerated type in map_cqe_status
  RDMA/siw: Remove unnecessary kthread create/destroy printouts
  IB/rdmavt: Fix variable shadowing issue in rvt_create_cq
  RDMA/core: Fix race when resolving IP address
  RDMA/core: Make rdma_counter.h compile stand alone
  IB/core: Work on the caller socket net namespace in nldev_newlink()
  RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM
  RDMA/mlx5: Set RDMA DIM to be enabled by default
  RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink
  RDMA/core: Provide RDMA DIM support for ULPs
  linux/dim: Implement RDMA adaptive moderation (DIM)
  IB/mlx5: Report correctly tag matching rendezvous capability
  docs: infiniband: add it to the driver-api bookset
  IB/mlx5: Implement VHCA tunnel mechanism in DEVX
  ...

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Set 'struct device' fwnode when registering a new device

  New Drivers:
   - Add support for ROHM BD70528 PMIC

  New Device Support:
   - Add support for LP87561 4-Phase Regulator to TI LP87565 PMIC
   - Add support for RK809 and RK817 to Rockchip RK808
   - Add support for Lid Angle to ChromeOS core
   - Add support for CS47L15 CODEC to Madera core
   - Add support for CS47L92 CODEC to Madera core
   - Add support for ChromeOS (legacy) Accelerometers in ChromeOS core
   - Add support for Add Intel Elkhart Lake PCH to Intel LPSS

  New Functionality:
   - Provide regulator supply information when registering; madera-core
   - Additional Device Tree support; lp87565, madera, cros-ec, rohm,bd71837-pmic
   - Allow over-riding power button press via Device Tree; rohm-bd718x7
   - Differentiate between running processors; cros_ec_dev

  Fix-ups:
   - Big header file update; cros_ec_commands.h
   - Split header per-subsystem; rohm-bd718x7
   - Remove superfluous code; menelaus, cs5535-mfd, cs47lXX-tables
   - Trivial; sorting, coding style; intel-lpss-pci
   - Only remove Power Off functionality if set locally; rk808
   - Make use for Power Off Prepare(); rk808
   - Fix spelling mistake in header guards; stmfx
   - Properly free IDA resources
   - SPDX fixups; cs47lXX-tables, madera
   - Error path fixups; hi655x-pmic

  Bug Fixes:
   - Add missing break in case() statement
   - Repair undefined behaviour when not initialising variables; arizona-core, madera-core
   - Fix reference to Device Tree documentation; madera"

* tag 'mfd-next-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits)
  mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk
  mfd: madera: Fixup SPDX headers
  mfd: madera: Remove some unused registers and fix some defaults
  mfd: intel-lpss: Release IDA resources
  mfd: intel-lpss: Add Intel Elkhart Lake PCH PCI IDs
  mfd: cs5535-mfd: Remove ifdef OLPC noise
  mfd: stmfx: Fix macro definition spelling
  dt-bindings: mfd: Add link to ROHM BD71847 Datasheet
  MAINAINERS: Swap words in INTEL PMIC MULTIFUNCTION DEVICE DRIVERS
  mfd: cros_ec_dev: Register cros_ec_accel_legacy driver as a subdevice
  mfd: rk808: Prepare rk805 for poweroff
  mfd: rk808: Check pm_power_off pointer
  mfd: cros_ec: differentiate SCP from EC by feature bit
  dt-bindings: Add binding for cros-ec-rpmsg
  mfd: madera: Add Madera core support for CS47L92
  mfd: madera: Add Madera core support for CS47L15
  mfd: madera: Update DT bindings to add additional CODECs
  mfd: madera: Add supply mapping for MICVDD
  mfd: madera: Fix potential uninitialised use of variable
  mfd: madera: Fix bad reference to pinctrl.txt file
  ...

Pull drm updates from Dave Airlie:
 "The biggest thing in this is the AMD Navi GPU support, this again
  contains a bunch of header files that are large. These are the new AMD
  RX5700 GPUs that just recently became available.

  New drivers:
   - ST-Ericsson MCDE driver
   - Ingenic JZ47xx SoC

  UAPI change:
   - HDR source metadata property

  Core:
   - HDR inforframes and EDID parsing
   - drm hdmi infoframe unpacking
   - remove prime sg_table caching into dma-buf
   - New gem vram helpers to reduce driver code
   - Lots of drmP.h removal
   - reservation fencing fix
   - documentation updates
   - drm_fb_helper_connector removed
   - mode name command handler rewrite

  fbcon:
   - Remove the fbcon notifiers

  ttm:
   - forward progress fixes

  dma-buf:
   - make mmap call optional
   - debugfs refcount fixes
   - dma-fence free with pending signals fix
   - each dma-buf gets an inode

  Panels:
   - Lots of additional panel bindings

  amdgpu:
   - initial navi10 support
   - avoid hw reset
   - HDR metadata support
   - new thermal sensors for vega asics
   - RAS fixes
   - use HMM rather than MMU notifier
   - xgmi topology via kfd
   - SR-IOV fixes
   - driver reload fixes
   - DC use a core bpc attribute
   - Aux fixes for DC
   - Bandwidth calc updates for DC
   - Clock handling refactor
   - kfd VEGAM support

  vmwgfx:
   - Coherent memory support changes

  i915:
   - HDR Support
   - HDMI i2c link
   - Icelake multi-segmented gamma support
   - GuC firmware update
   - Mule Creek Canyon PCH support for EHL
   - EHL platform updtes
   - move i915.alpha_support to i915.force_probe
   - runtime PM refactoring
   - VBT parsing refactoring
   - DSI fixes
   - struct mutex dependency reduction
   - GEM code reorg

  mali-dp:
   - Komeda driver features

  msm:
   - dsi vs EPROBE_DEFER fixes
   - msm8998 snapdragon 835 support
   - a540 gpu support
   - mdp5 and dpu interconnect support

  exynos:
   - drmP.h removal

  tegra:
   - misc fixes

  tda998x:
   - audio support improvements
   - pixel repeated mode support
   - quantisation range handling corrections
   - HDMI vendor info fix

  armada:
   - interlace support fix
   - overlay/video plane register handling refactor
   - add gamma support

  rockchip:
   - RX3328 support

  panfrost:
   - expose perf counters via hidden ioctls

  vkms:
   - enumerate CRC sources list

  ast:
   - rework BO handling

  mgag200:
   - rework BO handling

  dw-hdmi:
   - suspend/resume support

  rcar-du:
   - R8A774A1 Soc Support
   - LVDS dual-link mode support
   - Additional formats
   - Misc fixes

  omapdrm:
   - DSI command mode display support

  stm
   - fb modifier support
   - runtime PM support

  sun4i:
   - use vmap ops

  vc4:
   - binner bo binding rework

  v3d:
   - compute shader support
   - resync/sync fixes
   - job management refactoring

  lima:
   - NULL pointer in irq handler fix
   - scheduler default timeout

  virtio:
   - fence seqno support
   - trace events

  bochs:
   - misc fixes

  tc458767:
   - IRQ/HDP handling

  sii902x:
   - HDMI audio support

  atmel-hlcdc:
   - misc fixes

  meson:
   - zpos support"

* tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits)
  Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next"
  Revert "mm: adjust apply_to_pfn_range interface for dropped token."
  mm: adjust apply_to_pfn_range interface for dropped token.
  drm/amdgpu/navi10: add uclk activity sensor
  drm/amdgpu: properly guard the generic discovery code
  drm/amdgpu: add missing documentation on new module parameters
  drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback
  drm/amd/display: avoid 64-bit division
  drm/amdgpu/psp11: simplify the ucode register logic
  drm/amdgpu: properly guard DC support in navi code
  drm/amd/powerplay: vega20: fix uninitialized variable use
  drm/amd/display: dcn20: include linux/delay.h
  amdgpu: make pmu support optional
  drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent
  drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq
  drm/amd/powerplay: Use memset to initialize metrics structs
  drm/amdgpu/mes10.1: Fix header guard
  drm/amd/powerplay: add temperature sensor support for navi10
  drm/amdgpu: fix scheduler timeout calc
  drm/amdgpu: Prepare for hmm_range_register API change (v2)
  ...

This reverts commit 031e610a, reversing
changes made to 52d2d44e.

The mm changes in there we premature and not fully ack or reviewed by core mm folks,
I dropped the ball by merging them via this tree, so lets take em all back out.
Signed-off-by: Dave Airlie <airlied@redhat.com>

This reverts commit 6dfc43d3.

Going to revert the whole vmwwgfx pull.
Signed-off-by: Dave Airlie <airlied@redhat.com>

mm/pgtable: drop pgtable_t variable from pte_fn_t functions
drops the token came in via the hmm tree, this caused lots of
conflicts, but applying this cleanup patch should reduce it
to something easier to handle. Just accept the token is unused
at this point.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull HMM updates from Jason Gunthorpe:
 "Improvements and bug fixes for the hmm interface in the kernel:

   - Improve clarity, locking and APIs related to the 'hmm mirror'
     feature merged last cycle. In linux-next we now see AMDGPU and
     nouveau to be using this API.

   - Remove old or transitional hmm APIs. These are hold overs from the
     past with no users, or APIs that existed only to manage cross tree
     conflicts. There are still a few more of these cleanups that didn't
     make the merge window cut off.

   - Improve some core mm APIs:
       - export alloc_pages_vma() for driver use
       - refactor into devm_request_free_mem_region() to manage
         DEVICE_PRIVATE resource reservations
       - refactor duplicative driver code into the core dev_pagemap
         struct

   - Remove hmm wrappers of improved core mm APIs, instead have drivers
     use the simplified API directly

   - Remove DEVICE_PUBLIC

   - Simplify the kconfig flow for the hmm users and core code"

* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (42 commits)
  mm: don't select MIGRATE_VMA_HELPER from HMM_MIRROR
  mm: remove the HMM config option
  mm: sort out the DEVICE_PRIVATE Kconfig mess
  mm: simplify ZONE_DEVICE page private data
  mm: remove hmm_devmem_add
  mm: remove hmm_vma_alloc_locked_page
  nouveau: use devm_memremap_pages directly
  nouveau: use alloc_page_vma directly
  PCI/P2PDMA: use the dev_pagemap internal refcount
  device-dax: use the dev_pagemap internal refcount
  memremap: provide an optional internal refcount in struct dev_pagemap
  memremap: replace the altmap_valid field with a PGMAP_ALTMAP_VALID flag
  memremap: remove the data field in struct dev_pagemap
  memremap: add a migrate_to_ram method to struct dev_pagemap_ops
  memremap: lift the devmap_enable manipulation into devm_memremap_pages
  memremap: pass a struct dev_pagemap to ->kill and ->cleanup
  memremap: move dev_pagemap callbacks into a separate structure
  memremap: validate the pagemap type passed to devm_memremap_pages
  mm: factor out a devm_request_free_mem_region helper
  mm: export alloc_pages_vma
  ...

Merge tag 'ecryptfs-5.3-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs

Pull eCryptfs updates from Tyler Hicks:

 - Fix error handling when ecryptfs_read_lower() encounters an error

 - Fix read-only file creation when the eCryptfs mount is configured to
   store metadata in xattrs

 - Minor code cleanups

* tag 'ecryptfs-5.3-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
  ecryptfs: Change return type of ecryptfs_process_flags
  ecryptfs: Make ecryptfs_xattr_handler static
  ecryptfs: remove unnessesary null check in ecryptfs_keyring_auth_tok_for_sig
  ecryptfs: use print_hex_dump_bytes for hexdump
  eCryptfs: fix permission denied with ecryptfs_xattr mount option when create readonly file
  ecryptfs: re-order a condition for static checkers
  eCryptfs: fix a couple type promotion bugs

Pull UBIFS updates from Richard Weinberger:

 - Support for zstd compression

 - Support for offline signed filesystems

 - Various fixes for regressions

* tag 'upstream-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubifs: Don't leak orphans on memory during commit
  ubifs: Check link count of inodes when killing orphans.
  ubifs: Add support for zstd compression.
  ubifs: support offline signed images
  ubifs: remove unnecessary check in ubifs_log_start_commit
  ubifs: Fix typo of output in get_cs_sqnum
  ubifs: Simplify redundant code
  ubifs: Correctly use tnc_next() in search_dh_cookie()

Pull UML updates from Richard Weinberger:

 - A new timer mode, time travel, for testing with UML

 - Many bugixes/improvements for the serial line driver

 - Various bugfixes

* tag 'for-linus-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: fix build without CONFIG_UML_TIME_TRAVEL_SUPPORT
  um: Fix kcov crash during startup
  um: configs: Remove useless UEVENT_HELPER_PATH
  um: Support time travel mode
  um: Pass nsecs to os timer functions
  um: Remove drivers/ssl.h
  um: Don't garbage collect in deactivate_all_fds()
  um: Silence lockdep complaint about mmap_sem
  um: Remove locking in deactivate_all_fds()
  um: Timer code cleanup
  um: fix os_timer_one_shot()
  um: Fix IRQ controller regression on console read

Pull stream_open() updates from Kirill Smelkov:
 "This time on stream_open front it is only two small changes:

   - the first one converts stream_open.cocci to treat all functions
     that start with wait_.* as blocking. Previously it was only
     wait_event_.* functions that were considered as blocking, but this
     was falsely reporting several deadlock cases as only warning.

     This was picked by linux-kbuild and entered mainline as commit
     0c4ab18f ("coccinelle: api/stream_open: treat all wait_.*()
     calls as blocking"), and already merged earlier.

   - the second one teaches stream_open.cocci to consider files as being
     stream-like even if they use noop_llseek. It results in two more
     drivers being converted to stream_open() (mousedev.c and
     hid-sensor-custom.c)"

* tag 'stream_open-5.3' of https://lab.nexedi.com/kirr/linux:
  *: convert stream-like files -> stream_open, even if they use noop_llseek

Pull x86 platform driver updates from Andy Shevchenko:
 "Gathered a bunch of x86 platform driver changes. It's rather big,
  since includes two big refactors and completely new driver:

   - ASUS WMI driver got a big refactoring in order to support the TUF
     Gaming laptops. Besides that, the regression with backlight being
     permanently off on various EeePC laptops has been fixed.

   - Accelerometer on HP ProBook 450 G0 shows wrong measurements due to
     X axis being inverted. This has been fixed.

   - Intel PMC core driver has been extended to be ACPI enumerated if
     the DSDT provides device with _HID "INT33A1". This allows to
     convert the driver to be pure platform and support new hardware
     purely based on ACPI DSDT.

   - From now on the Intel Speed Select Technology is supported thru a
     corresponding driver. This driver provides an access to the
     features of the ISST, such as Performance Profile, Core Power, Base
     frequency and Turbo Frequency.

   - Mellanox platform drivers has been refactored and now extended to
     support more systems, including new coming ones.

   - The OLPC XO-1.75 platform is now supported.

   - CB4063 Beckhoff Automation board is using PMC clocks, provided via
     pmc_atom driver, for ethernet controllers in a way that they can't
     be managed by the clock driver. The quirk has been extended to
     cover this case.

   - Touchscreen on Chuwi Hi10 Plus tablet has been enabled. Meanwhile
     the information of Chuwi Hi10 Air has been fixed to cover more
     models based on the same platform.

   - Xiaomi notebooks have WMI interface enabled. Thus, the driver to
     support it has been provided. It required some extension of the
     generic WMI library, which allows to propagate opaque context to
     the ->probe() of the individual drivers.

  This release includes debugfs clean up from Greg KH for several
  drivers that drop return code check and make debugfs absence or
  failure non-fatal.

  Also miscellaneous fixes here and there, mostly for Acer WMI and
  various Intel drivers"

* tag 'platform-drivers-x86-v5.3-1' of git://git.infradead.org/linux-platform-drivers-x86: (74 commits)
  platform/x86: Fix PCENGINES_APU2 Kconfig warning
  tools/power/x86/intel-speed-select: Add .gitignore file
  platform/x86: mlx-platform: Fix error handling in mlxplat_init()
  platform/x86: intel_pmc_core: Attach using APCI HID "INT33A1"
  platform/x86: intel_pmc_core: transform Pkg C-state residency from TSC ticks into microseconds
  platform/x86: asus-wmi: Use dev_get_drvdata()
  Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
  platform/x86: mlx-platform: Add more reset cause attributes
  platform/x86: mlx-platform: Modify DMI matching order
  platform/x86: mlx-platform: Add regmap structure for the next generation systems
  platform/x86: mlx-platform: Change API for i2c-mlxcpld driver activation
  platform/x86: mlx-platform: Move regmap initialization before all drivers activation
  MAINTAINERS: Update for Intel Speed Select Technology
  tools/power/x86: A tool to validate Intel Speed Select commands
  platform/x86: ISST: Restore state on resume
  platform/x86: ISST: Add Intel Speed Select PUNIT MSR interface
  platform/x86: ISST: Add Intel Speed Select mailbox interface via MSRs
  platform/x86: ISST: Add Intel Speed Select mailbox interface via PCI
  platform/x86: ISST: Add Intel Speed Select mmio interface
  platform/x86: ISST: Add IOCTL to Translate Linux logical CPU to PUNIT CPU number
  ...