- 17 May, 2015 8 commits
-
-
Andrzej Pietrasiewicz authored
[ Upstream commit eb132ccb ] Function-specific setup requests should be handled in such a way, that apart from filling in the data buffer, the requests are also actually enqueued: if function-specific setup is called from composte_setup(), the "usb_ep_queue()" block of code in composite_setup() is skipped. The printer function lacks this part and it results in e.g. get device id requests failing: the host expects some response, the device prepares it but does not equeue it for sending to the host, so the host finally asserts timeout. This patch adds enqueueing the prepared responses. Cc: <stable@vger.kernel.org> # v3.4+ Fixes: 2e87edf4: "usb: gadget: make g_printer use composite" Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Filipe Manana authored
[ Upstream commit HEAD ] commit 113e8283 upstream. If we pass a length of 0 to the extent_same ioctl, we end up locking an extent range with a start offset greater then its end offset (if the destination file's offset is greater than zero). This results in a warning from extent_io.c:insert_state through the following call chain: btrfs_extent_same() btrfs_double_lock() lock_extent_range() lock_extent(inode->io_tree, offset, offset + len - 1) lock_extent_bits() __set_extent_bit() insert_state() --> WARN_ON(end < start) This leads to an infinite loop when evicting the inode. This is the same problem that my previous patch titled "Btrfs: fix inode eviction infinite loop after cloning into it" addressed but for the extent_same ioctl instead of the clone ioctl. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Omar Sandoval <osandov@osandov.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 9dc10661) Signed-off-by:
-
Filipe Manana authored
[ Upstream commit HEAD ] commit ccccf3d6 upstream. If we attempt to clone a 0 length region into a file we can end up inserting a range in the inode's extent_io tree with a start offset that is greater then the end offset, which triggers immediately the following warning: [ 3914.619057] WARNING: CPU: 17 PID: 4199 at fs/btrfs/extent_io.c:435 insert_state+0x4b/0x10b [btrfs]() [ 3914.620886] BTRFS: end < start 4095 4096 (...) [ 3914.638093] Call Trace: [ 3914.638636] [<ffffffff81425fd9>] dump_stack+0x4c/0x65 [ 3914.639620] [<ffffffff81045390>] warn_slowpath_common+0xa1/0xbb [ 3914.640789] [<ffffffffa03ca44f>] ? insert_state+0x4b/0x10b [btrfs] [ 3914.642041] [<ffffffff810453f0>] warn_slowpath_fmt+0x46/0x48 [ 3914.643236] [<ffffffffa03ca44f>] insert_state+0x4b/0x10b [btrfs] [ 3914.644441] [<ffffffffa03ca729>] __set_extent_bit+0x107/0x3f4 [btrfs] [ 3914.645711] [<ffffffffa03cb256>] lock_extent_bits+0x65/0x1bf [btrfs] [ 3914.646914] [<ffffffff8142b2fb>] ? _raw_spin_unlock+0x28/0x33 [ 3914.648058] [<ffffffffa03cbac4>] ? test_range_bit+0xcc/0xde [btrfs] [ 3914.650105] [<ffffffffa03cb3c3>] lock_extent+0x13/0x15 [btrfs] [ 3914.651361] [<ffffffffa03db39e>] lock_extent_range+0x3d/0xcd [btrfs] [ 3914.652761] [<ffffffffa03de1fe>] btrfs_ioctl_clone+0x278/0x388 [btrfs] [ 3914.654128] [<ffffffff811226dd>] ? might_fault+0x58/0xb5 [ 3914.655320] [<ffffffffa03e0909>] btrfs_ioctl+0xb51/0x2195 [btrfs] (...) [ 3914.669271] ---[ end trace 14843d3e2e622fc1 ]--- This later makes the inode eviction handler enter an infinite loop that keeps dumping the following warning over and over: [ 3915.117629] WARNING: CPU: 22 PID: 4228 at fs/btrfs/extent_io.c:435 insert_state+0x4b/0x10b [btrfs]() [ 3915.119913] BTRFS: end < start 4095 4096 (...) [ 3915.137394] Call Trace: [ 3915.137913] [<ffffffff81425fd9>] dump_stack+0x4c/0x65 [ 3915.139154] [<ffffffff81045390>] warn_slowpath_common+0xa1/0xbb [ 3915.140316] [<ffffffffa03ca44f>] ? insert_state+0x4b/0x10b [btrfs] [ 3915.141505] [<ffffffff810453f0>] warn_slowpath_fmt+0x46/0x48 [ 3915.142709] [<ffffffffa03ca44f>] insert_state+0x4b/0x10b [btrfs] [ 3915.143849] [<ffffffffa03ca729>] __set_extent_bit+0x107/0x3f4 [btrfs] [ 3915.145120] [<ffffffffa038c1e3>] ? btrfs_kill_super+0x17/0x23 [btrfs] [ 3915.146352] [<ffffffff811548f6>] ? deactivate_locked_super+0x3b/0x50 [ 3915.147565] [<ffffffffa03cb256>] lock_extent_bits+0x65/0x1bf [btrfs] [ 3915.148785] [<ffffffff8142b7e2>] ? _raw_write_unlock+0x28/0x33 [ 3915.149931] [<ffffffffa03bc325>] btrfs_evict_inode+0x196/0x482 [btrfs] [ 3915.151154] [<ffffffff81168904>] evict+0xa0/0x148 [ 3915.152094] [<ffffffff811689e5>] dispose_list+0x39/0x43 [ 3915.153081] [<ffffffff81169564>] evict_inodes+0xdc/0xeb [ 3915.154062] [<ffffffff81154418>] generic_shutdown_super+0x49/0xef [ 3915.155193] [<ffffffff811546d1>] kill_anon_super+0x13/0x1e [ 3915.156274] [<ffffffffa038c1e3>] btrfs_kill_super+0x17/0x23 [btrfs] (...) [ 3915.167404] ---[ end trace 14843d3e2e622fc2 ]--- So just bail out of the clone ioctl if the length of the region to clone is zero, without locking any extent range, in order to prevent this issue (same behaviour as a pwrite with a 0 length for example). This is trivial to reproduce. For example, the steps for the test I just made for fstests: mkfs.btrfs -f SCRATCH_DEV mount SCRATCH_DEV $SCRATCH_MNT touch $SCRATCH_MNT/foo touch $SCRATCH_MNT/bar $CLONER_PROG -s 0 -d 4096 -l 0 $SCRATCH_MNT/foo $SCRATCH_MNT/bar umount $SCRATCH_MNT A test case for fstests follows soon. Signed-off-by:
-
David Sterba authored
[ Upstream commit HEAD ] commit 3c3b04d1 upstream. Due to insufficient check in btrfs_is_valid_xattr, this unexpectedly works: $ touch file $ setfattr -n user. -v 1 file $ getfattr -d file user.="1" ie. the missing attribute name after the namespace. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94291Reported-by:
William Douglas <william.douglas@intel.com> Signed-off-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
-
Filipe Manana authored
[ Upstream commit HEAD ] commit dcc82f47 upstream. While committing a transaction we free the log roots before we write the new super block. Freeing the log roots implies marking the disk location of every node/leaf (metadata extent) as pinned before the new super block is written. This is to prevent the disk location of log metadata extents from being reused before the new super block is written, otherwise we would have a corrupted log tree if before the new super block is written a crash/reboot happens and the location of any log tree metadata extent ended up being reused and rewritten. Even though we pinned the log tree's metadata extents, we were issuing a discard against them if the fs was mounted with the -o discard option, resulting in corruption of the log tree if a crash/reboot happened before writing the new super block - the next time the fs was mounted, during the log replay process we would find nodes/leafs of the log btree with a content full of zeroes, causing the process to fail and require the use of the tool btrfs-zero-log to wipeout the log tree (and all data previously fsynced becoming lost forever). Fix this by not doing a discard when pinning an extent. The discard will be done later when it's safe (after the new super block is committed) at extent-tree.c:btrfs_finish_extent_commit(). Fixes: e688b725 (Btrfs: fix extent pinning bugs in the tree log) Signed-off-by:
-
Nadav Amit authored
[ Upstream commit HEAD ] commit 9e9c3fe4 upstream. kvm_init_msr_list is currently called before hardware_setup. As a result, vmx_mpx_supported always returns false when kvm_init_msr_list checks whether to save MSR_IA32_BNDCFGS. Move kvm_init_msr_list after vmx_hardware_setup is called to fix this issue. Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 702a71cf) Signed-off-by:
-
Mike Galbraith authored
[ Upstream commit f8e617f4 ] To fully take advantage of MWAIT, apparently the CLFLUSH instruction needs another quirk on certain CPUs: proper barriers around it on certain machines. On a Q6600 SMP system, pipe-test scheduling performance, cross core, improves significantly: 3.8.13 487.2 KHz 1.000 3.13.0-master 415.5 KHz .852 3.13.0-master+ 415.2 KHz .852 + restore mwait_idle 3.13.0-master++ 488.5 KHz 1.002 + restore mwait_idle + IPI fix Since X86_BUG_CLFLUSH_MONITOR is already a quirk, don't create a separate quirk for the extra smp_mb()s. Signed-off-by:
Mike Galbraith <bitbucket@online.de> Cc: <stable@vger.kernel.org> # 3.10+ Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ian Malone <ibmalone@gmail.com> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1390061684.5566.4.camel@marge.simpson.net [ Ported to recent kernel, added comments about the quirk. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Len Brown authored
sched/idle/x86: Restore mwait_idle() to fix boot hangs, to improve power savings and to improve performance [ Upstream commit b253149b ] In Linux-3.9 we removed the mwait_idle() loop: 69fb3676 ("x86 idle: remove mwait_idle() and "idle=mwait" cmdline param") The reasoning was that modern machines should be sufficiently happy during the boot process using the default_idle() HALT loop, until cpuidle loads and either acpi_idle or intel_idle invoke the newer MWAIT-with-hints idle loop. But two machines reported problems: 1. Certain Core2-era machines support MWAIT-C1 and HALT only. MWAIT-C1 is preferred for optimal power and performance. But if they support just C1, cpuidle never loads and so they use the boot-time default idle loop forever. 2. Some laptops will boot-hang if HALT is used, but will boot successfully if MWAIT is used. This appears to be a hidden assumption in BIOS SMI, that is presumably valid on the proprietary OS where the BIOS was validated. https://bugzilla.kernel.org/show_bug.cgi?id=60770 So here we effectively revert the patch above, restoring the mwait_idle() loop. However, we don't bother restoring the idle=mwait cmdline parameter, since it appears to add no value. Maintainer notes: For 3.9, simply revert 69fb3676 for 3.10, patch -F3 applies, fuzz needed due to __cpuinit use in context For 3.11, 3.12, 3.13, this patch applies cleanly Tested-by:
Len Brown <len.brown@intel.com> Acked-by:
-
- 11 May, 2015 32 commits
-
-
Eric Dumazet authored
[ Upstream commit 2ea2f62c ] When I added pfmemalloc support in build_skb(), I forgot netlink was using build_skb() with a vmalloc() area. In this patch I introduce __build_skb() for netlink use, and build_skb() is a wrapper handling both skb->head_frag and skb->pfmemalloc This means netlink no longer has to hack skb->head_frag [ 1567.700067] kernel BUG at arch/x86/mm/physaddr.c:26! [ 1567.700067] invalid opcode: 0000 [#1] PREEMPT SMP KASAN [ 1567.700067] Dumping ftrace buffer: [ 1567.700067] (ftrace buffer empty) [ 1567.700067] Modules linked in: [ 1567.700067] CPU: 9 PID: 16186 Comm: trinity-c182 Not tainted 4.0.0-next-20150424-sasha-00037-g4796e21 #2167 [ 1567.700067] task: ffff880127efb000 ti: ffff880246770000 task.ti: ffff880246770000 [ 1567.700067] RIP: __phys_addr (arch/x86/mm/physaddr.c:26 (discriminator 3)) [ 1567.700067] RSP: 0018:ffff8802467779d8 EFLAGS: 00010202 [ 1567.700067] RAX: 000041000ed8e000 RBX: ffffc9008ed8e000 RCX: 000000000000002c [ 1567.700067] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffffb3fd6049 [ 1567.700067] RBP: ffff8802467779f8 R08: 0000000000000019 R09: ffff8801d0168000 [ 1567.700067] R10: ffff8801d01680c7 R11: ffffed003a02d019 R12: ffffc9000ed8e000 [ 1567.700067] R13: 0000000000000f40 R14: 0000000000001180 R15: ffffc9000ed8e000 [ 1567.700067] FS: 00007f2a7da3f700(0000) GS:ffff8801d1000000(0000) knlGS:0000000000000000 [ 1567.700067] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1567.700067] CR2: 0000000000738308 CR3: 000000022e329000 CR4: 00000000000007e0 [ 1567.700067] Stack: [ 1567.700067] ffffc9000ed8e000 ffff8801d0168000 ffffc9000ed8e000 ffff8801d0168000 [ 1567.700067] ffff880246777a28 ffffffffad7c0a21 0000000000001080 ffff880246777c08 [ 1567.700067] ffff88060d302e68 ffff880246777b58 ffff880246777b88 ffffffffad9a6821 [ 1567.700067] Call Trace: [ 1567.700067] build_skb (include/linux/mm.h:508 net/core/skbuff.c:316) [ 1567.700067] netlink_sendmsg (net/netlink/af_netlink.c:1633 net/netlink/af_netlink.c:2329) [ 1567.774369] ? sched_clock_cpu (kernel/sched/clock.c:311) [ 1567.774369] ? netlink_unicast (net/netlink/af_netlink.c:2273) [ 1567.774369] ? netlink_unicast (net/netlink/af_netlink.c:2273) [ 1567.774369] sock_sendmsg (net/socket.c:614 net/socket.c:623) [ 1567.774369] sock_write_iter (net/socket.c:823) [ 1567.774369] ? sock_sendmsg (net/socket.c:806) [ 1567.774369] __vfs_write (fs/read_write.c:479 fs/read_write.c:491) [ 1567.774369] ? get_lock_stats (kernel/locking/lockdep.c:249) [ 1567.774369] ? default_llseek (fs/read_write.c:487) [ 1567.774369] ? vtime_account_user (kernel/sched/cputime.c:701) [ 1567.774369] ? rw_verify_area (fs/read_write.c:406 (discriminator 4)) [ 1567.774369] vfs_write (fs/read_write.c:539) [ 1567.774369] SyS_write (fs/read_write.c:586 fs/read_write.c:577) [ 1567.774369] ? SyS_read (fs/read_write.c:577) [ 1567.774369] ? __this_cpu_preempt_check (lib/smp_processor_id.c:63) [ 1567.774369] ? trace_hardirqs_on_caller (kernel/locking/lockdep.c:2594 kernel/locking/lockdep.c:2636) [ 1567.774369] ? trace_hardirqs_on_thunk (arch/x86/lib/thunk_64.S:42) [ 1567.774369] system_call_fastpath (arch/x86/kernel/entry_64.S:261) Fixes: 79930f58 ("net: do not deplete pfmemalloc reserve") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 79930f58 ] build_skb() should look at the page pfmemalloc status. If set, this means page allocator allocated this page in the expectation it would help to free other pages. Networking stack can do that only if skb->pfmemalloc is also set. Also, we must refrain using high order pages from the pfmemalloc reserve, so __page_frag_refill() must also use __GFP_NOMEMALLOC for them. Under memory pressure, using order-0 pages is probably the best strategy. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 845704a5 ] Presence of an unbound loop in tcp_send_fin() had always been hard to explain when analyzing crash dumps involving gigantic dying processes with millions of sockets. Lets try a different strategy : In case of memory pressure, try to add the FIN flag to last packet in write queue, even if packet was already sent. TCP stack will be able to deliver this FIN after a timeout event. Note that this FIN being delivered by a retransmit, it also carries a Push flag given our current implementation. By checking sk_under_memory_pressure(), we anticipate that cooking many FIN packets might deplete tcp memory. In the case we could not allocate a packet, even with __GFP_WAIT allocation, then not sending a FIN seems quite reasonable if it allows to get rid of this socket, free memory, and not block the process from eventually doing other useful work. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit d83769a5 ] Using sk_stream_alloc_skb() in tcp_send_fin() is dangerous in case a huge process is killed by OOM, and tcp_mem[2] is hit. To be able to free memory we need to make progress, so this patch allows FIN packets to not care about tcp_mem[2], if skb allocation succeeded. In a follow-up patch, we might abort tcp_send_fin() infinite loop in case TIF_MEMDIE is set on this thread, as memory allocator did its best getting extra memory already. This patch reverts d22e1537 ("tcp: fix tcp fin memory accounting") Fixes: d22e1537 ("tcp: fix tcp fin memory accounting") Signed-off-by:
-
Tom Herbert authored
[ Upstream commit 3dfb0534 ] Call checksum_complete_unset in PPP receive to discard checksum-complete value. PPP does not pull checksum for headers and also modifies packet as in VJ compression. Signed-off-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
-
Tom Herbert authored
[ Upstream commit 4e18b9ad ] This function changes ip_summed to CHECKSUM_NONE if CHECKSUM_COMPLETE is set. This is called to discard checksum-complete when packet is being modified and checksum is not pulled for headers in a layer. Signed-off-by:
-
Sebastian Pöhn authored
[ Upstream commit 2ab95749 ] Initial discussion was: [FYI] xfrm: Don't lookup sk_policy for timewait sockets Forwarded frames should not have a socket attached. Especially tw sockets will lead to panics later-on in the stack. This was observed with TPROXY assigning a tw socket and broken policy routing (misconfigured). As a result frame enters forwarding path instead of input. We cannot solve this in TPROXY as it cannot know that policy routing is broken. v2: Remove useless comment Signed-off-by:
Sebastian Poehn <sebastian.poehn@gmail.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit a134f083 ] If we don't do that, then the poison value is left in the ->pprev backlink. This can cause crashes if we do a disconnect, followed by a connect(). Tested-by:
Linus Torvalds <torvalds@linux-foundation.org> Reported-by:
Wen Xu <hotdog3645@gmail.com> Signed-off-by:
-
Ido Shamay authored
[ Upstream commit 07841f9d ] When system is out of memory, refilling of RX buffers fails while the driver continue to pass the received packets to the kernel stack. At some point, when all RX buffers deplete, driver may fall into a sleep, and not recover when memory for new RX buffers is once again availible. This is because hardware does not have valid descriptors, so no interrupt will be generated for the driver to return to work in napi context. Fix it by schedule the napi poll function from stats_task delayed workqueue, as long as the allocations fail. Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
-
Benjamin Poirier authored
[ Upstream commit 42eab005 ] By default, the number of tx queues is limited by the number of online cpus in mlx4_en_get_profile(). However, this limit no longer holds after the ethtool .set_channels method has been called. In that situation, the driver may access invalid bits of certain cpumask variables when queue_index >= nr_cpu_ids. Signed-off-by:
Benjamin Poirier <bpoirier@suse.de> Acked-by:
-
Christoffer Dall authored
commit ae705930 upstream. There is an interesting bug in the vgic code, which manifests itself when the KVM run loop has a signal pending or needs a vmid generation rollover after having disabled interrupts but before actually switching to the guest. In this case, we flush the vgic as usual, but we sync back the vgic state and exit to userspace before entering the guest. The consequence is that we will be syncing the list registers back to the software model using the GICH_ELRSR and GICH_EISR from the last execution of the guest, potentially overwriting a list register containing an interrupt. This showed up during migration testing where we would capture a state where the VM has masked the arch timer but there were no interrupts, resulting in a hung test. Cc: Marc Zyngier <marc.zyngier@arm.com> Reported-by:
Alex Bennee <alex.bennee@linaro.org> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
-
Marc Zyngier authored
commit 04b8dc85 upstream. The kernel's pgd_index macro is designed to index a normal, page sized array. KVM is a bit diffferent, as we can use concatenated pages to have a bigger address space (for example 40bit IPA with 4kB pages gives us an 8kB PGD. In the above case, the use of pgd_index will always return an index inside the first 4kB, which makes a guest that has memory above 0x8000000000 rather unhappy, as it spins forever in a page fault, whist the host happilly corrupts the lower pgd. The obvious fix is to get our own kvm_pgd_index that does the right thing(tm). Tested on X-Gene with a hacked kvmtool that put memory at a stupidly high address. Reviewed-by:
-
Marc Zyngier authored
commit a987370f upstream. We're using __get_free_pages with to allocate the guest's stage-2 PGD. The standard behaviour of this function is to return a set of pages where only the head page has a valid refcount. This behaviour gets us into trouble when we're trying to increment the refcount on a non-head page: page:ffff7c00cfb693c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x4000000000000000() page dumped because: VM_BUG_ON_PAGE((*({ __attribute__((unused)) typeof((&page->_count)->counter) __var = ( typeof((&page->_count)->counter)) 0; (volatile typeof((&page->_count)->counter) *)&((&page->_count)->counter); })) <= 0) BUG: failure at include/linux/mm.h:548/get_page()! Kernel panic - not syncing: BUG! CPU: 1 PID: 1695 Comm: kvm-vcpu-0 Not tainted 4.0.0-rc1+ #3825 Hardware name: APM X-Gene Mustang board (DT) Call trace: [<ffff80000008a09c>] dump_backtrace+0x0/0x13c [<ffff80000008a1e8>] show_stack+0x10/0x1c [<ffff800000691da8>] dump_stack+0x74/0x94 [<ffff800000690d78>] panic+0x100/0x240 [<ffff8000000a0bc4>] stage2_get_pmd+0x17c/0x2bc [<ffff8000000a1dc4>] kvm_handle_guest_abort+0x4b4/0x6b0 [<ffff8000000a420c>] handle_exit+0x58/0x180 [<ffff80000009e7a4>] kvm_arch_vcpu_ioctl_run+0x114/0x45c [<ffff800000099df4>] kvm_vcpu_ioctl+0x2e0/0x754 [<ffff8000001c0a18>] do_vfs_ioctl+0x424/0x5c8 [<ffff8000001c0bfc>] SyS_ioctl+0x40/0x78 CPU0: stopping A possible approach for this is to split the compound page using split_page() at allocation time, and change the teardown path to free one page at a time. It turns out that alloc_pages_exact() and free_pages_exact() does exactly that. While we're at it, the PGD allocation code is reworked to reduce duplication. This has been tested on an X-Gene platform with a 4kB/48bit-VA host kernel, and kvmtool hacked to place memory in the second page of the hardware PGD (PUD for the host kernel). Also regression-tested on a Cubietruck (Cortex-A7). [ Reworked to use alloc_pages_exact() and free_pages_exact() and to return pointers directly instead of by reference as arguments - Christoffer ] Reported-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Jan Kiszka authored
commit a050dfb2 upstream. The check is supposed to catch page-unaligned sizes, not the inverse. Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
-
Marc Zyngier authored
commit 0d3e4d4f upstream. When handling a fault in stage-2, we need to resync I$ and D$, just to be sure we don't leave any old cache line behind. That's very good, except that we do so using the *user* address. Under heavy load (swapping like crazy), we may end up in a situation where the page gets mapped in stage-2 while being unmapped from userspace by another CPU. At that point, the DC/IC instructions can generate a fault, which we handle with kvm->mmu_lock held. The box quickly deadlocks, user is unhappy. Instead, perform this invalidation through the kernel mapping, which is guaranteed to be present. The box is much happier, and so am I. Signed-off-by:
-
Marc Zyngier authored
commit 363ef89f upstream. Let's assume a guest has created an uncached mapping, and written to that page. Let's also assume that the host uses a cache-coherent IO subsystem. Let's finally assume that the host is under memory pressure and starts to swap things out. Before this "uncached" page is evicted, we need to make sure we invalidate potential speculated, clean cache lines that are sitting there, or the IO subsystem is going to swap out the cached view, loosing the data that has been written directly into memory. Signed-off-by:
-
Marc Zyngier authored
commit 801f6772 upstream. Commit b856a591 (arm/arm64: KVM: Reset the HCR on each vcpu when resetting the vcpu) moved the init of the HCR register to happen later in the init of a vcpu, but left out the fixup done in kvm_reset_vcpu when preparing for a 32bit guest. As a result, the 32bit guest is run as a 64bit guest, but the rest of the kernel still manages it as a 32bit. Fun follows. Moving the fixup to vcpu_reset_hcr solves the problem for good. Signed-off-by:
-
Marc Zyngier authored
commit 55e858b7 upstream. It took about two years for someone to notice that the IPA passed to TLBI IPAS2E1IS must be shifted by 12 bits. Clearly our reviewing is not as good as it should be... Paper bag time for me. Reported-by:
Mario Smarduch <m.smarduch@samsung.com> Tested-by:
-
Eric Auger authored
commit 66b030e4 upstream. To be more explicit on vgic initialization failure, -ENODEV is returned by vgic_init when no online vcpus can be found at init. Signed-off-by:
Eric Auger <eric.auger@linaro.org> Signed-off-by:
-
Christoffer Dall authored
commit 05971120 upstream. It is curently possible to run a VM with architected timers support without creating an in-kernel VGIC, which will result in interrupts from the virtual timer going nowhere. To address this issue, move the architected timers initialization to the time when we run a VCPU for the first time, and then only initialize (and enable) the architected timers if we have a properly created and initialized in-kernel VGIC. When injecting interrupts from the virtual timer to the vgic, the current setup should ensure that this never calls an on-demand init of the VGIC, which is the only call path that could return an error from kvm_vgic_inject_irq(), so capture the return value and raise a warning if there's an error there. We also change the kvm_timer_init() function from returning an int to be a void function, since the function always succeeds. Reviewed-by:
-
Christoffer Dall authored
commit ca7d9c82 upstream. Userspace assumes that it can wire up IRQ injections after having created all VCPUs and after having created the VGIC, but potentially before starting the first VCPU. This can currently lead to lost IRQs because the state of that IRQ injection is not stored anywhere and we don't return an error to userspace. We haven't seen this problem manifest itself yet, presumably because guests reset the devices on boot, but this could cause issues with migration and other non-standard startup configurations. Reviewed-by:
-
Shannon Zhao authored
commit 016ed39c upstream. When call kvm_vgic_inject_irq to inject interrupt, we can known which vcpu the interrupt for by the irq_num and the cpuid. So we should just kick this vcpu to avoid iterating through all. Reviewed-by:
Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by:
-
Christoffer Dall authored
commit 716139df upstream. When the vgic initializes its internal state it does so based on the number of VCPUs available at the time. If we allow KVM to create more VCPUs after the VGIC has been initialized, we are likely to error out in unfortunate ways later, perform buffer overflows etc. Acked-by:
-
Peter Maydell authored
commit 6d3cfbe2 upstream. VGIC initialization currently happens in three phases: (1) kvm_vgic_create() (triggered by userspace GIC creation) (2) vgic_init_maps() (triggered by userspace GIC register read/write requests, or from kvm_vgic_init() if not already run) (3) kvm_vgic_init() (triggered by first VM run) We were doing initialization of some state to correspond with the state of a freshly-reset GIC in kvm_vgic_init(); this is too late, since it will overwrite changes made by userspace using the register access APIs before the VM is run. Move this initialization earlier, into the vgic_init_maps() phase. This fixes a bug where QEMU could successfully restore a saved VM state snapshot into a VM that had already been run, but could not restore it "from cold" using the -loadvm command line option (the symptoms being that the restored VM would run but interrupts were ignored). Finally rename vgic_init_maps to vgic_init and renamed kvm_vgic_init to kvm_vgic_map_resources. [ This patch is originally written by Peter Maydell, but I have modified it somewhat heavily, renaming various bits and moving code around. If something is broken, I am to be blamed. - Christoffer ] Acked-by:
Peter Maydell <peter.maydell@linaro.org> Signed-off-by:
-
Christoffer Dall authored
commit 957db105 upstream. Introduce a new function to unmap user RAM regions in the stage2 page tables. This is needed on reboot (or when the guest turns off the MMU) to ensure we fault in pages again and make the dcache, RAM, and icache coherent. Using unmap_stage2_range for the whole guest physical range does not work, because that unmaps IO regions (such as the GIC) which will not be recreated or in the best case faulted in on a page-by-page basis. Call this function on secondary and subsequent calls to the KVM_ARM_VCPU_INIT ioctl so that a reset VCPU will detect the guest Stage-1 MMU is off when faulting in pages and make the caches coherent. Acked-by:
-
Christoffer Dall authored
commit cf5d3188 upstream. When a vcpu calls SYSTEM_OFF or SYSTEM_RESET with PSCI v0.2, the vcpus should really be turned off for the VM adhering to the suggestions in the PSCI spec, and it's the sane thing to do. Also, clarify the behavior and expectations for exits to user space with the KVM_EXIT_SYSTEM_EVENT case. Acked-by:
-
Christoffer Dall authored
commit b856a591 upstream. When userspace resets the vcpu using KVM_ARM_VCPU_INIT, we should also reset the HCR, because we now modify the HCR dynamically to enable/disable trapping of guest accesses to the VM registers. This is crucial for reboot of VMs working since otherwise we will not be doing the necessary cache maintenance operations when faulting in pages with the guest MMU off. Acked-by:
-
Christoffer Dall authored
commit 3ad8b3de upstream. The implementation of KVM_ARM_VCPU_INIT is currently not doing what userspace expects, namely making sure that a vcpu which may have been turned off using PSCI is returned to its initial state, which would be powered on if userspace does not set the KVM_ARM_VCPU_POWER_OFF flag. Implement the expected functionality and clarify the ABI. Acked-by:
-
Christoffer Dall authored
commit 03f1d4c1 upstream. If a VCPU was originally started with power off (typically to be brought up by PSCI in SMP configurations), there is no need to clear the POWER_OFF flag in the kernel, as this flag is only tested during the init ioctl itself. Acked-by:
-
Ard Biesheuvel authored
commit 849260c7 upstream. Readonly memslots are often used to implement emulation of ROMs and NOR flashes, in which case the guest may legally map these regions as uncached. To deal with the incoherency associated with uncached guest mappings, treat all readonly memslots as incoherent, and ensure that pages that belong to regions tagged as such are flushed to DRAM before being passed to the guest. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Laszlo Ersek authored
commit 840f4bfb upstream. To allow handling of incoherent memslots in a subsequent patch, this patch adds a paramater 'ipa_uncached' to cache_coherent_guest_page() so that we can instruct it to flush the page's contents to DRAM even if the guest has caching globally enabled. Signed-off-by:
Laszlo Ersek <lersek@redhat.com> Signed-off-by:
-
Ard Biesheuvel authored
commit 1050dcda upstream. Memory regions may be incoherent with the caches, typically when the guest has mapped a host system RAM backed memory region as uncached. Add a flag KVM_MEMSLOT_INCOHERENT so that we can tag these memslots and handle them appropriately when mapping them. Signed-off-by:
-
