- 14 Oct, 2009 2 commits
-
-
Arnaldo Carvalho de Melo authored
Reported-by: "Tony Luck" <tony.luck@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Gleixner authored
The lock_kernel/unlock_kernel() in cycle_kernel_lock() which is called in tun_chr_open() is not serializing against anything and safe to remove. tun_chr_fasync() is serialized by get/put_tun() and fasync_helper() has no dependency on BKL. The modification of tun->flags is racy with and without the BKL so removing it does not make it worse. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 13 Oct, 2009 38 commits
-
-
David S. Miller authored
-
Sriram authored
The mechanism to clear the statistics register is dependent on the status of GMIIEN bit in MAC control register. If the GMIIEN bit is set, the stats registers are write to decrement. If the GMIIEN bit is cleared, the stats registers are plain read/write registers. The stats register clearing operation must take into account the current state of GMIIEN as it can be cleared when the interface is brought down. With existing implementation logic, querying for interface stats when the interface is down, can corrupt the statistics counters. This patch examines the GMIIEN bit status in MAC_CONTROL register before choosing an appropriate mask for clearing stats registers. Signed-off-by: Sriramakrishnan <srk@ti.com> Acked-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
françois romieu authored
Extracted from Realtek's 8.012.00 r8168 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Simon Farnsworth <simon.farnsworth@onelan.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Manuel Lauss authored
Extend the driver to accept a MAC address specified in platform_data. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Manuel Lauss authored
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
Commit 5675f221 overlooked the way offsets for netdev stats were considered. Because of this some of the stats shown by ethtool -S were wrong. This patch fixes it. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
Commit 337e067d overlooked the way offsets for netdev stats were considered. Because of this some of the stats shown by ethtool -S were wrong. This patch fixes it. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
Commit 23d26497 overlooked the way offsets for netdev stats were considered. Because of this some of the stats shown by ethtool -S were wrong. This patch fixes it. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
Commit fd8235bb overlooked the way offsets for netdev stats were considered. Because of this some of the stats shown by ethtool -S were wrong. This patch fixes it. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ajit Khaparde authored
Commit 59aa3cc4 overlooked the way offsets for netdev stats were considered. Because of this some of the stats shown by ethtool -S were wrong. This patch fixes it. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dhananjay Phadke authored
Add sysfs entries to enable register and memory access for diagnostic tools. Signed-off-by: Narender Kumar <narender.kumar@qlogic.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dhananjay Phadke authored
Since register and onboard memory access has separate window registers, they need not be kept under same lock. Also, memory is always accessed from process context (mostly for firmware init and diagnostic tools). Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dhananjay Phadke authored
Use common variables crb_win, ocm_win for all revisions of chip. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dhananjay Phadke authored
Add access to on chip memory, this is used by debug and diagnostic tools only. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
Sub 64-bit / unaligned access to oncard memory was only used by old diagnostic tools, causes some intermittent issues when memory controller agent is used. The new access method was added by commit ea6828b8 ("netxen: improve pci memory access"). Firmware init anyway uses 8-byte strides. This also fixes address/offset calculation for NX2031 context memory (SIU). For NX3031, SIU uses same register offsets as packet memory (MIU). Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
roel kluin authored
The bit V_MAC_RX_PL_THRSH(4) was already set a few lines higher. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
roel kluin authored
The negation makes it a bool before the comparison and hence it will never evaluate to true. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
roel kluin authored
Looking at commit ebc3f64b it appears that this was intended and not the original, equivalent to `if (facilities.reverse & ~0x81)'. In x25_parse_facilities() that patch changed how facilities->reverse was set. No other bits were set than 0x80 and/or 0x01. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Karen Xie authored
This patch added support of private MAC address per port and provisioning packet handler for iSCSI traffic only. The above changes are isolated to the cxgb3 driver, independent of any scsi or iscsi driver changes. Acked-by: Karen Xie <kxie@chelsio.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Rakesh Ranjan <rakesh@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Magnus Damm authored
Add Runtime PM support to the sh_eth driver. The clock to the ethernet hardware block will be enabled as long as the network device is up. Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Magnus Damm authored
Extend the sh_eth driver to allow passing the mac address using the platform data structure. This to simplify board setup code. Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wolfgang Grandegger authored
This patch allows the CAN controller driver to define the number of echo skb's used for the local loopback (echo), as suggested by Kurt Van Dijck, with the function: struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max); The CAN drivers have been adapted accordingly. For the ems_usb driver, as suggested by Sebastian Haas, the number of echo skb's has been increased to 10, which improves the transmission performance a lot. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Instead of hardcoding NET_IP_ALIGN stuff in various network drivers, we can add a helper around netdev_alloc_skb() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Storing the mask (size - 1) instead of the size allows fast path to be a bit faster. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cosmin Ratiu authored
Signed-off-by: Cosmin Ratiu <cratiu@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dmitry Artamonow authored
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
udp_poll() can in some circumstances drop frames with incorrect checksums. Problem is we now have to lock the socket while dropping frames, or risk sk_forward corruption. This bug is present since commit 95766fff ([UDP]: Add memory accounting.) While we are at it, we can correct ioctl(SIOCINQ) to also drop bad frames. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Halasa authored
Cisco HDLC uses keepalive packets and sequence numbers to determine link state. In rare cases both ends could transmit keepalive packets at the same time, causing the received sequence numbers to be treated as incorrect. Now we accept our current sequence number as well as the previous one. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Willy Tarreau authored
I was trying to use TCP_DEFER_ACCEPT and noticed that if the client does not talk, the connection is never accepted and remains in SYN_RECV state until the retransmits expire, where it finally is deleted. This is bad when some firewall such as netfilter sits between the client and the server because the firewall sees the connection in ESTABLISHED state while the server will finally silently drop it without sending an RST. This behaviour contradicts the man page which says it should wait only for some time : TCP_DEFER_ACCEPT (since Linux 2.4) Allows a listener to be awakened only when data arrives on the socket. Takes an integer value (seconds), this can bound the maximum number of attempts TCP will make to complete the connection. This option should not be used in code intended to be portable. Also, looking at ipv4/tcp.c, a retransmit counter is correctly computed : case TCP_DEFER_ACCEPT: icsk->icsk_accept_queue.rskq_defer_accept = 0; if (val > 0) { /* Translate value in seconds to number of * retransmits */ while (icsk->icsk_accept_queue.rskq_defer_accept < 32 && val > ((TCP_TIMEOUT_INIT / HZ) << icsk->icsk_accept_queue.rskq_defer_accept)) icsk->icsk_accept_queue.rskq_defer_accept++; icsk->icsk_accept_queue.rskq_defer_accept++; } break; ==> rskq_defer_accept is used as a counter of retransmits. But in tcp_minisocks.c, this counter is only checked. And in fact, I have found no location which updates it. So I think that what was intended was to decrease it in tcp_minisocks whenever it is checked, which the trivial patch below does. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas de Pesloüan authored
The function bond_create_proc_entry is currently of type int. Two versions of this function exist: The one in the ifdef CONFIG_PROC_FS branch always return 0. The one in the else branch (which is empty) return nothing. When CONFIG_PROC_FS is undef, this cause the following warning: drivers/net/bonding/bond_main.c: In function `bond_create_proc_entry': drivers/net/bonding/bond_main.c:3393: warning: control reaches end of non-void function No caller of this function use the returned value. So change the returned type from int to void and remove the useless return 0; . Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Reported-by: Rakib Mullick <rakib.mullick@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ken Kawasaki authored
3c574_cs: spin_lock the set_multicast_list function. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chris Rankin authored
The Belkin F8T012xx1 bluetooth adaptor has the same vendor and product IDs as the Belkin F5D5050, so we need to teach the pegasus driver to ignore adaptors belonging to the "Wireless" class 0xE0. For this one case anyway, seeing as pegasus is a driver for "Wired" adaptors. Signed-off-by: Chris Rankin <rankincj@yahoo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dhananjay Phadke authored
Use resource_size_t for PCI resource remapping instead of unsigned long. Physical addresses can exceed range of long data type (e.g with PAE). Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alan Cox authored
drivers/net/ethoc.c: In function ‘ethoc_open’: drivers/net/ethoc.c:667: warning: comparison of distinct pointer types lacks a cast Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alan Cox authored
drivers/net/wireless/libertas/cmdresp.c: In function ‘lbs_process_event’: drivers/net/wireless/libertas/cmdresp.c:519: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function) drivers/net/wireless/libertas/cmdresp.c:519: error: (Each undeclared identifier is reported only once drivers/net/wireless/libertas/cmdresp.c:519: error: for each function it appears in.) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shreyas Bhatewara authored
Ethernet NIC driver for VMware's vmxnet3 From: Shreyas Bhatewara <sbhatewara@vmware.com> This patch adds driver support for VMware's virtual Ethernet NIC: vmxnet3 Guests running on VMware hypervisors supporting vmxnet3 device will thus have access to improved network functionalities and performance. Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: Ronghua Zhang <ronghua@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-