If we're doing a large IO request which needs to be split into multiple
bios for issue, then we can run into the same situation as the below
marked commit fixes - parts will complete just fine, one or more parts
will fail to allocate a request. This will result in a partially
completed read or write request, where the caller gets EAGAIN even though
parts of the IO completed just fine.

Do the same for large bios as we do for splits - fail a NOWAIT request
with EAGAIN. This isn't technically fixing an issue in the below marked
patch, but for stable purposes, we should have either none of them or
both.

This depends on: 613b1488 ("block: handle bio_split_to_limits() NULL return")

Cc: stable@vger.kernel.org # 5.15+
Fixes: 9cea62b2 ("block: don't allow splitting of a REQ_NOWAIT bio")
Link: https://github.com/axboe/liburing/issues/766Reported-and-tested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20230113123538.144276-9-christoph.boehmwalder@linbit.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Trying to remove an "empty" (just initialized, or "cleared") interval
from the tree, this results in an endless loop.

As we typically protect the tree with a spinlock_irq,
the result is a hung system.

Be nice to error cleanup code paths, ignore removal of empty intervals.
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20230113123538.144276-8-christoph.boehmwalder@linbit.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Joel Colledge <joel.colledge@linbit.com>
Link: https://lore.kernel.org/r/20230113123538.144276-7-christoph.boehmwalder@linbit.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This require_context attribute originated in a proposed sparse patch by
Philipp Reisner back in 2008. Johannes Berg had a different solution to
a similar problem, and that patch "won" in the end; so the require_context
thing never got merged. The whole history can be read at [0].

DRBD kept using these annotations anyway for a while. Nowadays, on a
modern unmodified sparse, they obviously do nothing, and they are hardly
used anymore anyway.

So, just remove the definitions of these macros.

[0] https://www.spinics.net/lists/linux-sparse/msg01150.htmlSigned-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Joel Colledge <joel.colledge@linbit.com>
Link: https://lore.kernel.org/r/20230113123538.144276-6-christoph.boehmwalder@linbit.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Joel Colledge <joel.colledge@linbit.com>
Link: https://lore.kernel.org/r/20230113123538.144276-5-christoph.boehmwalder@linbit.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

These are almost always used as unsigned integers, so mark them as such.
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Joel Colledge <joel.colledge@linbit.com>
Link: https://lore.kernel.org/r/20230113123538.144276-4-christoph.boehmwalder@linbit.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

The protocol uses -1 as a reserved value for
'no specific volume', and since the protocol field
is a 16 bit unsigned value, -1 is converted to
65535. Therefore, limit the range of valid volume
numbers to [0, 65534].
Signed-off-by: Robert Altnoeder <robert.altnoeder@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Joel Colledge <joel.colledge@linbit.com>
Link: https://lore.kernel.org/r/20230113123538.144276-3-christoph.boehmwalder@linbit.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

See also commit 93c68cc4 ("drbd: use consistent license"). We only
want to license drbd under GPL-2.0, so use the corresponding SPDX header
consistently.
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Joel Colledge <joel.colledge@linbit.com>
Link: https://lore.kernel.org/r/20230113123538.144276-2-christoph.boehmwalder@linbit.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

To be more similar to what we do in the out-of-tree module and ease the
upstreaming process.
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Joel Colledge <joel.colledge@linbit.com>
Link: https://lore.kernel.org/r/20230113123506.144082-4-christoph.boehmwalder@linbit.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use the genetlink api version as defined in drbd_genl_api.h.
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Joel Colledge <joel.colledge@linbit.com>
Link: https://lore.kernel.org/r/20230113123506.144082-3-christoph.boehmwalder@linbit.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

To be more similar to what we do in the out-of-tree module and ease the
upstreaming process.
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Joel Colledge <joel.colledge@linbit.com>
Link: https://lore.kernel.org/r/20230113123506.144082-2-christoph.boehmwalder@linbit.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

We have BIO_FLAG_LAST in the enum for bio specific flags, but it's
not used to check that we're not exceeding the size of them. Add
such a check.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The user can set the max_sectors limit to any valid value via sysfs
/sys/block/<dev>/queue/max_sectors_kb attribute. If the device limits
are ever rescanned, though, the limit reverts back to the potentially
artificially low BLK_DEF_MAX_SECTORS value.

Preserve the user's setting as the max_sectors limit as long as it's
valid. The user can reset back to defaults by writing 0 to the sysfs
file.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230105205146.3610282-3-kbusch@meta.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This is used as an unsigned value, so define it that way to avoid
having to cast it.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20230105205146.3610282-2-kbusch@meta.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Upon the invocation of its dispatch function, BFQ returns the next I/O
request of the in-service bfq_queue, unless some exception holds. One
such exception is that there is some underutilized actuator, different
from the actuator for which the in-service queue contains I/O, and
that some other bfq_queue happens to contain I/O for such an
actuator. In this case, the next I/O request of the latter bfq_queue,
and not of the in-service bfq_queue, is returned (I/O is injected from
that bfq_queue). To find such an actuator, a linear scan, in
increasing index order, is performed among actuators.

Performing a linear scan entails a prioritization among actuators: an
underutilized actuator may be considered for injection only if all
actuators with a lower index are currently fully utilized, or if there
is no pending I/O for any lower-index actuator that happens to be
underutilized.

This commits breaks this prioritization and tends to distribute
injection uniformly across actuators. This is obtained by adding the
following condition to the linear scan: even if an actuator A is
underutilized, A is however skipped if its load is higher than that of
the next actuator.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Davide Zini <davidezini2@gmail.com>
Link: https://lore.kernel.org/r/20230103145503.71712-9-paolo.valente@linaro.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

The main service scheme of BFQ for sync I/O is serving one sync
bfq_queue at a time, for a while. In particular, BFQ enforces this
scheme when it deems the latter necessary to boost throughput or
to preserve service guarantees. Unfortunately, when BFQ enforces
this policy, only one actuator at a time gets served for a while,
because each bfq_queue contains I/O only for one actuator. The
other actuators may remain underutilized.

Actually, BFQ may serve (inject) extra I/O, taken from other
bfq_queues, in parallel with that of the in-service queue. This
injection mechanism may provide the ground for dealing also with
the above actuator-underutilization problem. Yet BFQ does not take
the actuator load into account when choosing which queue to pick
extra I/O from. In addition, BFQ may happen to inject extra I/O
only when the in-service queue is temporarily empty.

In view of these facts, this commit extends the
injection mechanism in such a way that the latter:
(1) takes into account also the actuator load;
(2) checks such a load on each dispatch, and injects I/O for an
    underutilized actuator, if there is one and there is I/O for it.

To perform the check in (2), this commit introduces a load
threshold, currently set to 4.  A linear scan of each actuator is
performed, until an actuator is found for which the following two
conditions hold: the load of the actuator is below the threshold,
and there is at least one non-in-service queue that contains I/O
for that actuator. If such a pair (actuator, queue) is found, then
the head request of that queue is returned for dispatch, instead
of the head request of the in-service queue.

We have set the threshold, empirically, to the minimum possible
value for which an actuator is fully utilized, or close to be
fully utilized. By doing so, injected I/O 'steals' as few
drive-queue slots as possibile to the in-service queue. This
reduces as much as possible the probability that the service of
I/O from the in-service bfq_queue gets delayed because of slot
exhaustion, i.e., because all the slots of the drive queue are
filled with I/O injected from other queues (NCQ provides for 32
slots).

This new mechanism also counters actuator underutilization in the
case of asymmetric configurations of bfq_queues. Namely if there
are few bfq_queues containing I/O for some actuators and many
bfq_queues containing I/O for other actuators. Or if the
bfq_queues containing I/O for some actuators have lower weights
than the other bfq_queues.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Davide Zini <davidezini2@gmail.com>
Link: https://lore.kernel.org/r/20230103145503.71712-8-paolo.valente@linaro.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

This patch implements the code to gather the content of the
independent_access_ranges structure from the request_queue and copy
it into the queue's bfq_data. This copy is done at queue initialization.

We copy the access ranges into the bfq_data to avoid taking the queue
lock each time we access the ranges.

This implementation, however, puts a limit to the maximum independent
ranges supported by the scheduler. Such a limit is equal to the constant
BFQ_MAX_ACTUATORS. This limit was placed to avoid the allocation of
dynamic memory.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Co-developed-by: Rory Chen <rory.c.chen@seagate.com>
Signed-off-by: Rory Chen <rory.c.chen@seagate.com>
Signed-off-by: Federico Gavioli <f.gavioli97@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20230103145503.71712-7-paolo.valente@linaro.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Similarly to sync bfq_queues, also async bfq_queues need to be split
on a per-actuator basis.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Davide Zini <davidezini2@gmail.com>
Link: https://lore.kernel.org/r/20230103145503.71712-6-paolo.valente@linaro.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

When a bfq_queue Q is merged with another queue, several pieces of
information are saved about Q. These pieces are stored in the
bfqq_data field in the bfq_io_cq data structure of the process
associated with Q.

Yet, with a multi-actuator drive, a process may get associated with
multiple bfq_queues: one queue for each of the N actuators. Each of
these queues may undergo a merge. So, the bfq_io_cq data structure
must be able to accommodate the above information for N queues.

This commit solves this problem by turning the bfqq_data scalar field
into an array of N elements (and by changing code so as to handle
this array).

This solution is written under the assumption that bfq_queues
associated with different actuators cannot be cross-merged. This
assumption holds naturally with basic queue merging: the latter is
triggered by spatial locality, and sectors for different actuators are
not close to each other (apart from the corner case of the last
sectors served by a given actuator and the first sectors served by the
next actuator). As for stable cross-merging, the assumption here is
that it is disabled.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Gabriele Felici <felicigb@gmail.com>
Signed-off-by: Gianmarco Lusvardi <glusvardi@posteo.net>
Signed-off-by: Giulio Barabino <giuliobarabino99@gmail.com>
Signed-off-by: Emiliano Maccaferri <inbox@emilianomaccaferri.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20230103145503.71712-5-paolo.valente@linaro.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

With a multi-actuator drive, a process may get associated with multiple
bfq_queues: one queue for each of the N actuators. So, the bfq_io_cq
data structure must be able to accommodate its per-queue persistent
information for N queues. Currently it stores this information for
just one queue, in several scalar fields.

This is a preparatory commit for moving to accommodating persistent
information for N queues. In particular, this commit packs all the
above scalar fields into a single data structure. Then there is now
only one field, in bfq_io_cq, that stores all the above information. This
scalar field will then be turned into an array by a following commit.
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Gianmarco Lusvardi <glusvardi@posteo.net>
Signed-off-by: Giulio Barabino <giuliobarabino99@gmail.com>
Signed-off-by: Emiliano Maccaferri <inbox@emilianomaccaferri.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20230103145503.71712-4-paolo.valente@linaro.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

If queues associated with different actuators are merged, then control
is lost on each actuator. Therefore some actuator may be
underutilized, and throughput may decrease. This problem cannot occur
with basic queue merging, because the latter is triggered by spatial
locality, and sectors for different actuators are not close to each
other. Yet it may happen with stable merging. To address this issue,
this commit prevents stable merging from occurring among queues
associated with different actuators.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20230103145503.71712-3-paolo.valente@linaro.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Single-LUN multi-actuator SCSI drives, as well as all multi-actuator
SATA drives appear as a single device to the I/O subsystem [1].  Yet
they address commands to different actuators internally, as a function
of Logical Block Addressing (LBAs). A given sector is reachable by
only one of the actuators. For example, Seagate’s Serial Advanced
Technology Attachment (SATA) version contains two actuators and maps
the lower half of the SATA LBA space to the lower actuator and the
upper half to the upper actuator.

Evidently, to fully utilize actuators, no actuator must be left idle
or underutilized while there is pending I/O for it. The block layer
must somehow control the load of each actuator individually. This
commit lays the ground for allowing BFQ to provide such a per-actuator
control.

BFQ associates an I/O-request sync bfq_queue with each process doing
synchronous I/O, or with a group of processes, in case of queue
merging. Then BFQ serves one bfq_queue at a time. While in service, a
bfq_queue is emptied in request-position order. Yet the same process,
or group of processes, may generate I/O for different actuators. In
this case, different streams of I/O (each for a different actuator)
get all inserted into the same sync bfq_queue. So there is basically
no individual control on when each stream is served, i.e., on when the
I/O requests of the stream are picked from the bfq_queue and
dispatched to the drive.

This commit enables BFQ to control the service of each actuator
individually for synchronous I/O, by simply splitting each sync
bfq_queue into N queues, one for each actuator. In other words, a sync
bfq_queue is now associated to a pair (process, actuator). As a
consequence of this split, the per-queue proportional-share policy
implemented by BFQ will guarantee that the sync I/O generated for each
actuator, by each process, receives its fair share of service.

This is just a preparatory patch. If the I/O of the same process
happens to be sent to different queues, then each of these queues may
undergo queue merging. To handle this event, the bfq_io_cq data
structure must be properly extended. In addition, stable merging must
be disabled to avoid loss of control on individual actuators. Finally,
also async queues must be split. These issues are described in detail
and addressed in next commits. As for this commit, although multiple
per-process bfq_queues are provided, the I/O of each process or group
of processes is still sent to only one queue, regardless of the
actuator the I/O is for. The forwarding to distinct bfq_queues will be
enabled after addressing the above issues.

[1] https://www.linaro.org/blog/budget-fair-queueing-bfq-linux-io-scheduler-optimizations-for-multi-actuator-sata-hard-drives/Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Gabriele Felici <felicigb@gmail.com>
Signed-off-by: Carmine Zaccagnino <carmine@carminezacc.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20230103145503.71712-2-paolo.valente@linaro.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull irq fix from Borislav Petkov:

 - Cleanup the firmware node for the new IRQ MSI domain properly, to
   avoid leaking memory

* tag 'irq_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/msi: Free the fwnode created by msi_create_device_irq_domain()

Pull x86 fixes from Borislav Petkov:

 - Start checking for -mindirect-branch-cs-prefix clang support too now
   that LLVM 16 will support it

 - Fix a NULL ptr deref when suspending with Xen PV

 - Have a SEV-SNP guest check explicitly for features enabled by the
   hypervisor and fail gracefully if some are unsupported by the guest
   instead of failing in a non-obvious and hard-to-debug way

 - Fix a MSI descriptor leakage under Xen

 - Mark Xen's MSI domain as supporting MSI-X

 - Prevent legacy PIC interrupts from being resent in software by
   marking them level triggered, as they should be, which lead to a NULL
   ptr deref

* tag 'x86_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Move '-mindirect-branch-cs-prefix' out of GCC-only block
  acpi: Fix suspend with Xen PV
  x86/sev: Add SEV-SNP guest feature negotiation support
  x86/pci/xen: Fixup fallout from the PCI/MSI overhaul
  x86/pci/xen: Set MSI_FLAG_PCI_MSIX support in Xen MSI domain
  x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL

Pull input fixes from Dmitry Torokhov:

 - touchpads on HP 15-* laptops switched back to PS/2 emulation mode

 - a quirk for Clevo PCX0DX/TUXEDO XP1511 to make sure keyboard is
   responding after resume

* tag 'input-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add Clevo PCX0DX to i8042 quirk table
  Revert "Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode"

Pull cxl fixes from Dan Williams:
 "A couple of fixes for bugs introduced during the merge window. One is
  a regression, the other was a bug in the CXL AER handler:

   - Fix a crash regression due to module load order of cxl_pmem.ko

   - Fix wrong register offset read in CXL AER handling path"

* tag 'cxl-fixes-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/pmem: Fix nvdimm unregistration when cxl_pmem driver is absent
  cxl: fix cxl_report_and_clear() RAS UE addr mis-assignment

This reverts commit 7efc3b72.

We have got openSUSE reports (Link 1) for 6.1 kernel with khugepaged
stalling CPU for long periods of time.  Investigation of tracepoint data
shows that compaction is stuck in repeating fast_find_migrateblock()
based migrate page isolation, and then fails to migrate all isolated
pages.

Commit 7efc3b72 ("mm/compaction: fix set skip in fast_find_migrateblock")
was suspected as it was merged in 6.1 and in theory can indeed remove a
termination condition for fast_find_migrateblock() under certain
conditions, as it removes a place that always marks a scanned pageblock
from being re-scanned.  There are other such places, but those can be
skipped under certain conditions, which seems to match the tracepoint
data.

Testing of revert also appears to have resolved the issue, thus revert
the commit until a more robust solution for the original problem is
developed.

It's also likely this will fix qemu stalls with 6.1 kernel reported in
Link 2, but that is not yet confirmed.

Link: https://bugzilla.suse.com/show_bug.cgi?id=1206848
Link: https://lore.kernel.org/kvm/b8017e09-f336-3035-8344-c549086c2340@kernel.org/
Link: https://lore.kernel.org/lkml/20230125134434.18017-1-mgorman@techsingularity.net/
Fixes: 7efc3b72 ("mm/compaction: fix set skip in fast_find_migrateblock")
Cc: <stable@vger.kernel.org>
Tested-by: Pedro Falcato <pedro.falcato@gmail.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Joe found another DT file that shouldn't be executable, and that
frustrated me enough that I went hunting with this script:

    git ls-files -s |
        grep '^100755' |
        cut -f2 |
        xargs grep -L '^#!'

and that found another file that shouldn't have been marked executable
either, despite being in the scripts directory.

Maybe these two are the last ones at least for now.  But I'm sure we'll
be back in a few years, fixing things up again.

Fixes: 8c6789f4 ("ASoC: dt-bindings: Add Everest ES8326 audio CODEC")
Fixes: 4d8e5cd2 ("locking/atomics: Fix scripts/atomic/ script permissions")
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ksmbd server fixes from Steve French:
 "Four smb3 server fixes, all also for stable:

   - fix for signing bug

   - fix to more strictly check packet length

   - add a max connections parm to limit simultaneous connections

   - fix error message flood that can occur with newer Samba xattr
     format"

* tag '6.2-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: downgrade ndr version error message to debug
  ksmbd: limit pdu length size according to connection status
  ksmbd: do not sign response to session request for guest login
  ksmbd: add max connections parameter

Pull cifs fix from Steve French:
 "Fix for reconnect oops in smbdirect (RDMA), also is marked for stable"

* tag '6.2-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix oops due to uncleared server->smbd_conn in reconnect

Pull block fixes from Jens Axboe:
 "Minor tweaks for this release:

   - NVMe pull request via Christoph:
        - Flush initial scan_work for async probe (Keith Busch)
        - Fix passthrough csi check (Keith Busch)
        - Fix nvme-fc initialization order (Ross Lagerwall)

   - Fix for tearing down non-started device in ublk (Ming)"

* tag 'block-6.2-2023-01-27' of git://git.kernel.dk/linux:
  block: ublk: move ublk_chr_class destroying after devices are removed
  nvme: fix passthrough csi check
  nvme-pci: flush initial scan_work for async probe
  nvme-fc: fix initialization order

Pull io_uring fixes from Jens Axboe:
 "Two small fixes for this release:

   - Sanitize how async prep is done for drain requests, so we ensure
     that it always gets done (Dylan)

   - A ring provided buffer recycling fix for multishot receive (me)"

* tag 'io_uring-6.2-2023-01-27' of git://git.kernel.dk/linux:
  io_uring: always prep_async for drain requests
  io_uring/net: cache provided buffer group value for multishot receives

Pull hardening fixes from Kees Cook:

 - Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST

 - Reorganize gcc-plugin includes for GCC 13

 - Silence bcache memcpy run-time false positive warnings

* tag 'hardening-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  bcache: Silence memcpy() run-time false positive warnings
  gcc-plugins: Reorganize gimple includes for GCC 13
  kunit: memcpy: Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST

Pull tracing fixes from Steven Rostedt:

 - Fix filter memory leak by calling ftrace_free_filter()

 - Initialize trace_printk() earlier so that ftrace_dump_on_oops shows
   data on early crashes.

 - Update the outdated instructions in scripts/tracing/ftrace-bisect.sh

 - Add lockdep_is_held() to fix lockdep warning

 - Add allocation failure check in create_hist_field()

 - Don't initialize pointer that gets set right away in enabled_monitors_write()

 - Update MAINTAINER entries

 - Fix help messages in Kconfigs

 - Fix kernel-doc header for update_preds()

* tag 'trace-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  bootconfig: Update MAINTAINERS file to add tree and mailing list
  rv: remove redundant initialization of pointer ptr
  ftrace: Maintain samples/ftrace
  tracing/filter: fix kernel-doc warnings
  lib: Kconfig: fix spellos
  trace_events_hist: add check for return value of 'create_hist_field'
  tracing/osnoise: Use built-in RCU list checking
  tracing: Kconfig: Fix spelling/grammar/punctuation
  ftrace/scripts: Update the instructions for ftrace-bisect.sh
  tracing: Make sure trace_printk() can output as soon as it can be used
  ftrace: Export ftrace_free_filter() to modules

Pull i2c fixes from Wolfram Sang:
 "A bunch of driver fixes with a tiny bit of new IDs"

* tag 'i2c-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: rk3x: fix a bunch of kernel-doc warnings
  i2c: axxia: use 'struct' for kernel-doc notation
  dt-bindings: i2c: renesas,rzv2m: Fix SoC specific string
  i2c: mxs: suppress probe-deferral error message
  i2c: designware-pci: Add new PCI IDs for AMD NAVI GPU
  i2c: designware: Fix unbalanced suspended flag
  i2c: designware: use casting of u64 in clock multiplication to avoid overflow

Pull gpio fixes from Bartosz Golaszewski:

 - fix the -c option in the gpio-event-mode user-space example program

 - fix the irq number translation in gpio-ep93xx and make its irqchip
   immutable

 - add a missing spin_unlock in error path in gpio-mxc

 - fix a suspend breakage on System76 and Lenovo Gen2a introduced in
   GPIO ACPI

* tag 'gpio-fixes-for-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  tools: gpio: fix -c option of gpio-event-mon
  gpio: ep93xx: remove unused variable
  gpio: ep93xx: Make irqchip immutable
  gpio: ep93xx: Fix port F hwirq numbers in handler
  gpio: mxc: Unlock on error path in mxc_flip_edge()
  gpiolib-acpi: Don't set GPIOs for wakeup in S3 mode

Merge tag 'regulator-fix-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "A fix for the DT binding documentation which dropped a property when
  being converted to YAML format causing spurious errors validating
  device trees for platforms using the device"

* tag 'regulator-fix-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: dt-bindings: samsung,s2mps14: add lost samsung,ext-control-gpios

Pull overlayfs fixes from Miklos Szeredi:
 "Fix two bugs, a recent one introduced in the last cycle, and an older
  one from v5.11"

* tag 'ovl-fixes-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: fail on invalid uid/gid mapping at copy up
  ovl: fix tmpfile leak