- 02 Dec, 2017 13 commits
-
-
Lazar Alexei authored
Upon receiving suspend reject, print reject reason. Upon receiving resume event, print resume triggers. Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Lior David authored
Add a length check in wil_cfg80211_mgmt_tx to detect unsigned integer overflow. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Lior David authored
Add a length check in wmi_set_ie to detect unsigned integer overflow. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Lior David authored
When loading FW from file add block size checks to ensure a corrupted FW file will not cause the driver to write outside the device memory. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Lior David authored
The current length check: sizeof(cmd) + len > r->entry_size will allow very large values of len (> U16_MAX - sizeof(cmd)) and can cause a buffer overflow. Fix the check to cover this case. In addition, ensure the mailbox entry_size is not too small, since this can also bypass the above check. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Hamad Kadmany authored
On-going operations were not aborted properly and required locks were not taken. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Lior David authored
FW capabilities are currently retrieved only during module initialization, but userspace can replace the firmware while interface is down, so refresh the FW capabilities when interface is up (after FW is loaded) to ensure driver functionality matches the loaded FW. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Dedy Lansky authored
Upon sending/receiving WMI commands/events, print human readable names in addition to id for easier debugging. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Lazar Alexei authored
Allow run-time suspend when interface is down, keep card alive when interface is up. If driver is in wmi only or debug_fw mode run-time PM won't suspend. Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Manikanta Pubbisetty authored
Handle tdls peer events from the target. TDLS events for the peer could be discover, teardown, etc. As of now, adding the logic to handle tdls teardown events alone. Teardown due to peer traffic indication(PTR) timeout is one such teardown event from the target. Tested this change on QCA9888 with 10.4-3.5.1-00018 fw version. Signed-off-by: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Manikanta Pubbisetty authored
It is required to update the teardown state of the peer when a tdls link with that peer is terminated. This information is useful for the target to perform some cleanups wrt the tdls peer. Without proper cleanup, target assumes that the peer is connected and blocks future connection requests, updating the teardown state of the peer addresses the problem. Tested this change on QCA9888 with 10.4-3.5.1-00018 fw version. Signed-off-by: Manikanta Pubbisetty <mpubbise@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Toke Høiland-Jørgensen authored
Commit 4ca18078 ("ath10k: disable wake_tx_queue for older devices") disables the use of the mac80211 TXQs for some devices because of a theoretical throughput regression. The original regression report[1] was related to fq_codel qdisc drop performance, which was fixed in commit 9d18562a ("fq_codel: add batch ability to fq_codel_drop()"). Since then, we have not seen the TXQ-related regression, so it should be safe to re-enable TXQs. [1] http://lists.infradead.org/pipermail/ath10k/2016-April/007266.htmlSigned-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Gustavo A. R. Silva authored
Make use of the swap macro and remove unnecessary variable temp. This makes the code easier to read and maintain. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
- 30 Nov, 2017 22 commits
-
-
Linus Walleij authored
This is not supported anymore, devices needing a MAC address just assign one at random, it's just a driver pecularity. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
David Miller says: ==================== net: Significantly shrink the size of routes. Through a combination of several things, our route structures are larger than they need to be. Mostly this stems from having members in dst_entry which are only used by one class of routes. So the majority of the work in this series is about "un-commoning" these members and pushing them into the type specific structures. Unfortunately, IPSEC needed the most surgery. The majority of the changes here had to do with bundle creation and management. The other issue is the refcount alignment in dst_entry. Once we get rid of the not-so-common members, it really opens the door to removing that alignment entirely. I think the new layout looks really nice, so I'll reproduce it here: struct net_device *dev; struct dst_ops *ops; unsigned long _metrics; unsigned long expires; struct xfrm_state *xfrm; int (*input)(struct sk_buff *); int (*output)(struct net *net, struct sock *sk, struct sk_buff *skb); unsigned short flags; short obsolete; unsigned short header_len; unsigned short trailer_len; atomic_t __refcnt; int __use; unsigned long lastuse; struct lwtunnel_state *lwtstate; struct rcu_head rcu_head; short error; short __pad; __u32 tclassid; (This is for 64-bit, on 32-bit the __refcnt comes at the very end) So, the good news: 1) struct dst_entry shrinks from 160 to 112 bytes. 2) struct rtable shrinks from 216 to 168 bytes. 3) struct rt6_info shrinks from 384 to 320 bytes. Enjoy. v2: Collapse some patches logically based upon feedback. Fix the strange patch #7. v3: xfrm_dst_path() needs inline keyword Properly align __refcnt on 32-bit. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Miller authored
There are no more users. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <edumazet@google.com>
-
David Miller authored
While building ipsec bundles, blocks of xfrm dsts are linked together using dst->next from bottom to the top. The only thing this is used for is initializing the pmtu values of the xfrm stack, and for updating the mtu values at xfrm_bundle_ok() time. The bundle pmtu entries must be processed in this order so that pmtu values lower in the stack of routes can propagate up to the higher ones. Avoid using dst->next by simply maintaining an array of dst pointers as we already do for the xfrm_state objects when building the bundle. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <edumazet@google.com>
-
David Miller authored
We have padding to try and align the refcount on a separate cache line. But after several simplifications the padding has increased substantially. So now it's easy to change the layout to get rid of the padding entirely. We group the write-heavy __refcnt and __use with less often used items such as the rcu_head and the error code. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <edumazet@google.com>
-
David Miller authored
The first member of an IPSEC route bundle chain sets it's dst->path to the underlying ipv4/ipv6 route that carries the bundle. Stated another way, if one were to follow the xfrm_dst->child chain of the bundle, the final non-NULL pointer would be the path and point to either an ipv4 or an ipv6 route. This is largely used to make sure that PMTU events propagate down to the correct ipv4 or ipv6 route. When we don't have the top of an IPSEC bundle 'dst->path == dst'. Move it down into xfrm_dst and key off of dst->xfrm. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <edumazet@google.com>
-
David Miller authored
The dst->from value is only used by ipv6 routes to track where a route "came from". Any time we clone or copy a core ipv6 route in the ipv6 routing tables, we have the copy/clone's ->from point to the base route. This is used to handle route expiration properly. Only ipv6 uses this mechanism, and only ipv6 code references it. So it is safe to move it into rt6_info. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <edumazet@google.com>
-
David Miller authored
XFRM bundle child chains look like this: xdst1 --> xdst2 --> xdst3 --> path_dst All of xdstN are xfrm_dst objects and xdst->u.dst.xfrm is non-NULL. The final child pointer in the chain, here called 'path_dst', is some other kind of route such as an ipv4 or ipv6 one. The xfrm output path pops routes, one at a time, via the child pointer, until we hit one which has a dst->xfrm pointer which is NULL. We can easily preserve the above mechanisms with child sitting only in the xfrm_dst structure. All children in the chain before we break out of the xfrm_output() loop have dst->xfrm non-NULL and are therefore xfrm_dst objects. Since we break out of the loop when we find dst->xfrm NULL, we will not try to dereference 'dst' as if it were an xfrm_dst. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Miller authored
This will make a future change moving the dst->child pointer less invasive. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <edumazet@google.com>
-
David Miller authored
Only IPSEC routes have a non-NULL dst->child pointer. And IPSEC routes are identified by a non-NULL dst->xfrm pointer. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <edumazet@google.com>
-
David Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <edumazet@google.com>
-
David Miller authored
Delete it. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <edumazet@google.com>
-
Zhu Yanjun authored
In xmit, it is very impossible that TX_ERROR occurs. So using unlikely optimizes the xmit process. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Joe Jin <joe.jin@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tina Ruchandani authored
net/atm/mpoa_* files use 'struct timeval' to store event timestamps. struct timeval uses a 32-bit seconds field which will overflow in the year 2038 and beyond. Morever, the timestamps are being compared only to get seconds elapsed, so struct timeval which stores a seconds and microseconds field is an overkill. This patch replaces the use of struct timeval with time64_t to store a 64-bit seconds field. Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
There are several statements that have incorrect indentation. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
timespec is deprecated because of the y2038 overflow, so let's convert this one to ktime_get_ts64(). The code is already safe even on 32-bit architectures, since it uses monotonic times. On 64-bit architectures, nothing changes, while on 32-bit architectures this avoids one type conversion. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
netxen_collect_minidump() evidently just wants to get a monotonic timestamp. Using jiffies_to_timespec(jiffies, &ts) is not appropriate here, since it will overflow after 2^32 jiffies, which may be as short as 49 days of uptime. ktime_get_seconds() is the correct interface here. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Richard Leitner authored
Previously phy_id was u32 and phy_id_mask was unsigned int. As the phy_id_mask defines the important bits of the phy_id (and is therefore the same size) these two variables should be the same data type. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Lukas Wunner authored
No need to reinvent the wheel, we have bus_find_device_by_name(). Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
on T81 there are only 4 cores, hence setting max queue count to 4 would leave nothing for XDP_TX. This patch fixes this by doubling max queue count in above scenarios. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: cjacob <cjacob@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
This patch adds support for XDP_REDIRECT. Flush is not yet supported. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: cjacob <cjacob@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 29 Nov, 2017 5 commits
-
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd fixes from Bruce Fields: "I screwed up my merge window pull request; I only sent half of what I meant to. There were no new features, just bugfixes of various importance and some very minor cleanup, so I think it's all still appropriate for -rc2. Highlights: - Fixes from Trond for some races in the NFSv4 state code. - Fix from Naofumi Honda for a typo in the blocked lock notificiation code - Fixes from Vasily Averin for some problems starting and stopping lockd especially in network namespaces" * tag 'nfsd-4.15-1' of git://linux-nfs.org/~bfields/linux: (23 commits) lockd: fix "list_add double add" caused by legacy signal interface nlm_shutdown_hosts_net() cleanup race of nfsd inetaddr notifiers vs nn->nfsd_serv change race of lockd inetaddr notifiers vs nlmsvc_rqst change SUNRPC: make cache_detail structures const NFSD: make cache_detail structures const sunrpc: make the function arg as const nfsd: check for use of the closed special stateid nfsd: fix panic in posix_unblock_lock called from nfs4_laundromat lockd: lost rollback of set_grace_period() in lockd_down_net() lockd: added cleanup checks in exit_net hook grace: replace BUG_ON by WARN_ONCE in exit_net hook nfsd: fix locking validator warning on nfs4_ol_stateid->st_mutex class lockd: remove net pointer from messages nfsd: remove net pointer from debug messages nfsd: Fix races with check_stateid_generation() nfsd: Ensure we check stateid validity in the seqid operation checks nfsd: Fix race in lock stateid creation nfsd4: move find_lock_stateid nfsd: Ensure we don't recognise lock stateids after freeing them ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "We've collected some fixes in since the pre-merge window freeze. There's technically only one regression fix for 4.15, but the rest seems important and candidates for stable. - fix missing flush bio puts in error cases (is serious, but rarely happens) - fix reporting stat::st_blocks for buffered append writes - fix space cache invalidation - fix out of bound memory access when setting zlib level - fix potential memory corruption when fsync fails in the middle - fix crash in integrity checker - incremetnal send fix, path mixup for certain unlink/rename combination - pass flags to writeback so compressed writes can be throttled properly - error handling fixes" * tag 'for-4.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: incremental send, fix wrong unlink path after renaming file btrfs: tree-checker: Fix false panic for sanity test Btrfs: fix list_add corruption and soft lockups in fsync btrfs: Fix wild memory access in compression level parser btrfs: fix deadlock when writing out space cache btrfs: clear space cache inode generation always Btrfs: fix reported number of inode blocks after buffered append writes Btrfs: move definition of the function btrfs_find_new_delalloc_bytes Btrfs: bail out gracefully rather than BUG_ON btrfs: dev_alloc_list is not protected by RCU, use normal list_del btrfs: add missing device::flush_bio puts btrfs: Fix transaction abort during failure in btrfs_rm_dev_item Btrfs: add write_flags for compression bio
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull Microblaze fix from Michal Simek: "Add missing header to mmu_context_mm.h" * tag 'microblaze-4.15-rc2' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: add missing include to mmu_context_mm.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fix from David Miller: "Sparc T4 and later cpu bootup regression fix" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix boot on T4 and later.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) The forcedeth conversion from pci_*() DMA interfaces to dma_*() ones missed one spot. From Zhu Yanjun. 2) Missing CRYPTO_SHA256 Kconfig dep in cfg80211, from Johannes Berg. 3) Fix checksum offloading in thunderx driver, from Sunil Goutham. 4) Add SPDX to vm_sockets_diag.h, from Stephen Hemminger. 5) Fix use after free of packet headers in TIPC, from Jon Maloy. 6) "sizeof(ptr)" vs "sizeof(*ptr)" bug in i40e, from Gustavo A R Silva. 7) Tunneling fixes in mlxsw driver, from Petr Machata. 8) Fix crash in fanout_demux_rollover() of AF_PACKET, from Mike Maloney. 9) Fix race in AF_PACKET bind() vs. NETDEV_UP notifier, from Eric Dumazet. 10) Fix regression in sch_sfq.c due to one of the timer_setup() conversions. From Paolo Abeni. 11) SCTP does list_for_each_entry() using wrong struct member, fix from Xin Long. 12) Don't use big endian netlink attribute read for IFLA_BOND_AD_ACTOR_SYSTEM, it is in cpu endianness. Also from Xin Long. 13) Fix mis-initialization of q->link.clock in CBQ scheduler, preventing adding filters there. From Jiri Pirko. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits) ethernet: dwmac-stm32: Fix copyright net: via: via-rhine: use %p to format void * address instead of %x net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit myri10ge: Update MAINTAINERS net: sched: cbq: create block for q->link.block atm: suni: remove extraneous space to fix indentation atm: lanai: use %p to format kernel addresses instead of %x VSOCK: Don't set sk_state to TCP_CLOSE before testing it atm: fore200e: use %pK to format kernel addresses instead of %x ambassador: fix incorrect indentation of assignment statement vxlan: use __be32 type for the param vni in __vxlan_fdb_delete bonding: use nla_get_u64 to extract the value for IFLA_BOND_AD_ACTOR_SYSTEM sctp: use right member as the param of list_for_each_entry sch_sfq: fix null pointer dereference at timer expiration cls_bpf: don't decrement net's refcount when offload fails net/packet: fix a race in packet_bind() and packet_notifier() packet: fix crash in fanout_demux_rollover() sctp: remove extern from stream sched sctp: force the params with right types for sctp csum apis sctp: force SCTP_ERROR_INV_STRM with __u32 when calling sctp_chunk_fail ...
-