- 05 May, 2021 1 commit
-
-
Shuming Fan authored
The function number should be FUNC_NUM_MIC_ARRAY(0x2) for the feature unit 0x1E. Fixes: ca5118c0 ('ASoC: rt711-sdca: change capture switch controls') Signed-off-by:
Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20210504100424.8760-1-shumingf@realtek.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 28 Apr, 2021 4 commits
-
-
Mark Brown authored
There is problem with clk_hw_get_hw(). Using it pins the clock provider to itself, making it impossible to remove the related module. Revert the two commits using this function until this gets sorted out. Jerome Brunet (2): ASoC: stm32: do not request a new clock consummer reference ASoC: da7219: do not request a new clock consummer reference sound/soc/codecs/da7219.c | 5 +---- sound/soc/stm/stm32_sai_sub.c | 5 +---- 2 files changed, 2 insertions(+), 8 deletions(-) -- 2.31.1
-
Vijendar Mukunda authored
Below phython script throwing pcm_read() error. import subprocess p = subprocess.Popen(["aplay -t raw -D plughw:1,0 /dev/zero"], shell=True) subprocess.call(["arecord -Dhw:1,0 --dump-hw-params"], shell=True) subprocess.call(["arecord -Dhw:1,0 -fdat -d1 /dev/null"], shell=True) p.kill() Handling ACP global external interrupt enable register causing this issue. This register got updated wrongly when there is active stream causing interrupts disabled for active stream. Refactored code to handle enabling and disabling external interrupts. Signed-off-by:
Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/1619555017-29858-1-git-send-email-Vijendar.Mukunda@amd.comSigned-off-by:
-
Jerome Brunet authored
This reverts commit 12f8127f. There is problem with clk_hw_get_hw(). Using it pins the clock provider to itself, making it impossible to remove the module. Revert commit 12f8127f ("ASoC: da7219: properly get clk from the provider") until this gets sorted out. Reported-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Tested-by:
-
Jerome Brunet authored
This reverts commit 65d1cce7. There is problem with clk_hw_get_hw(). Using it pins the clock provider to itself, making it impossible to remove the module. Revert commit 65d1cce7 ("ASoC: stm32: properly get clk from the provider") until this gets sorted out. Signed-off-by:
-
- 26 Apr, 2021 1 commit
-
-
Marco Felsch authored
The ni1/ni2 ratio formula [1] uses the pclk which is the prescaled mclk. The max98088 datasheet [2] has no such formula but table-12 equals so we can assume that it is the same for both devices. While on it make use of DIV_ROUND_CLOSEST_ULL(). [1] https://datasheets.maximintegrated.com/en/ds/MAX98089.pdf; page 86 [2] https://datasheets.maximintegrated.com/en/ds/MAX98088.pdf; page 82 Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20210423135402.32105-1-m.felsch@pengutronix.deSigned-off-by:
-
- 23 Apr, 2021 8 commits
-
-
Mark Brown authored
A KernelCI bisection identified 59c35c44 "ASoC: simple-card: add simple_parse_node()" as causing simple-card to fail to instantiate on kontron-sl28-var3-ads2 systems. Since the merge window is expected to open over the weekend drop that commit and subsequent ones which depend on it for now in case other systems are affected too. The boot log showed the error as: <4>[ 9.948821] sysfs: cannot create duplicate filename '/devices/platform/sound/(null)-wm8904-hifi' (backtrace) <3>[ 10.191982] kobject_add_internal failed for (null)-wm8904-hifi with -EEXIST, don't try to register things with the same name in the same directory. The dropped commits are: 73371bac "ASoC: audio-graph: tidyup graph_dai_link_of_dpcm()" 43439227 "ASoC: simple-card: add simple_link_init()" 59c35c44 "ASoC: simple-card: add simple_parse_node()" Reported-by:
Guillaume Tucker <guillaume.tucker@collabora.com> Reported-by:
"kernelci.org bot" <bot@kernelci.org> Signed-off-by:
-
Shuming Fan authored
This patch adds the return value when the volume settings were changed. The userspace application might monitor the kcontrols to check which control changed. Signed-off-by:
-
Shuming Fan authored
The DAPM event and mixer control could mute/unmute the capture directly. That will be confused that capture still works if the user settings is unmute before the capture. Therefore, this patch uses the variables to record the capture switch status of DAPM and mixer. Signed-off-by:
-
Jerome Brunet authored
Instead of using the clk embedded in the clk_hw (which is meant to go away), a clock provider which need to interact with its own clock should request clk reference through the clock provider API. Reviewed-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Jerome Brunet authored
Clock providers should be registered using the clk_hw API. Signed-off-by:
-
Jerome Brunet authored
Clock drivers ops should not call the clk API but the clock provider (clk_hw) instead. Signed-off-by:
-
Jerome Brunet authored
Clock providers should use the clk_hw API Reviewed-by:
-
Jerome Brunet authored
Instead of using the clk embedded in the clk_hw (which is meant to go away), a clock provider which need to interact with its own clock should request clk reference through the clock provider API. Reviewed-by:
-
- 22 Apr, 2021 1 commit
-
-
Arnd Bergmann authored
A reorganization of the driver source led to two of them causing a compile time warning in some configurations: tegra/tegra20_spdif.c:36:12: error: 'tegra20_spdif_runtime_resume' defined but not used [-Werror=unused-function] 36 | static int tegra20_spdif_runtime_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ tegra/tegra20_spdif.c:27:12: error: 'tegra20_spdif_runtime_suspend' defined but not used [-Werror=unused-function] 27 | static int tegra20_spdif_runtime_suspend(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ tegra/tegra30_ahub.c:64:12: error: 'tegra30_ahub_runtime_resume' defined but not used [-Werror=unused-function] 64 | static int tegra30_ahub_runtime_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ tegra/tegra30_ahub.c:43:12: error: 'tegra30_ahub_runtime_suspend' defined but not used [-Werror=unused-function] 43 | static int tegra30_ahub_runtime_suspend(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ Mark these functions as __maybe_unused to avoid this kind of warning. Fixes: b5571449 ("ASoC: tegra30: ahub: Remove handing of disabled runtime PM") Fixes: c53b396f ("ASoC: tegra20: spdif: Remove handing of disabled runtime PM") Fixes: 80ec4a4c ("ASoC: tegra20: i2s: Remove handing of disabled runtime PM") Fixes: b5f6f781 ("ASoC: tegra30: i2s: Remove handing of disabled runtime PM") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210422133418.1757893-1-arnd@kernel.orgSigned-off-by:
-
- 21 Apr, 2021 5 commits
-
-
Kuninori Morimoto authored
Use local variable at local area only. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87a6psi417.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
This patch adds simple_link_init() and share dai_link setting code. Signed-off-by:
-
Kuninori Morimoto authored
Parse dai/tdm/clk are common for both CPU/Codec node. This patch creates simple_parse_node() for it and share the code. Signed-off-by:
-
Kuninori Morimoto authored
This patch adds graph_link_init() and share dai_link setting code. Signed-off-by:
-
Kuninori Morimoto authored
Parse mclk_fs/dai/tdm/clk are common for both CPU/Codec node. This patch creates graph_parse_node() for it and share the code. Signed-off-by:
-
- 20 Apr, 2021 10 commits
-
-
Mark Brown authored
Merge series "ASoC: audio-graph: cleanups" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark These patches cleanups audio-graph. This is part of prepare for new audio-graph-card2. Kuninori Morimoto (6): ASoC: audio-graph: move audio_graph_card_probe() to simple-card-utils.c ASoC: audio-graph: move audio_graph_remove() to simple-card-utils.c ASoC: audio-graph: check ports if exists ASoC: audio-graph: remove "audio-graph-card," preix support ASoC: audio-graph: remove unused "node" from graph_parse_mclk_fs() ASoC: audio-graph: remove Platform support include/sound/graph_card.h | 4 -- include/sound/simple_card_utils.h | 3 ++ sound/soc/generic/audio-graph-card.c | 52 ++++-------------------- sound/soc/generic/simple-card-utils.c | 25 ++++++++++++ sound/soc/generic/simple-card.c | 7 ---- sound/soc/tegra/tegra_audio_graph_card.c | 4 +- 6 files changed, 38 insertions(+), 57 deletions(-) -- 2.25.1 Thank you for your help !! Best regards --- Kuninori Morimoto
-
Viorel Suman authored
Enable Daisy Chain if in TDM mode and the number of played channels is bigger than the maximum supported number of channels. Signed-off-by:
Viorel Suman <viorel.suman@nxp.com> Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1618915453-29445-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Kuninori Morimoto authored
Platform was one of mandatory component on ASoC before, and audio-graph-card was assuming that CPU and Platform were same driver. But it is no longer mandatory on ASoC. Current ASoC will just ignore if Platform and CPU were same or doplicated component. Of course ASoC is supporting Platform, but current audio-graph-card doesn't support detecting it from DT. This means current audio-graph-card operation for Platform so far is 100% useless. This patch removes it. We can respawn it when we need it. Signed-off-by:
-
Kuninori Morimoto authored
graph_parse_mclk_fs() has "node", but is not used. This patch removes unused "node" Signed-off-by:
-
Kuninori Morimoto authored
No upstream code is using "audio-graph-card," preix, and Yaml base Document doesn't indicate it. Let's remove it. Signed-off-by:
-
Kuninori Morimoto authored
"endpoint" and "port" are always exists, but there is no guarantee for "ports". This patch checks "ports" if exists, otherwise, it might set un-expected settings. This patch also do align to 100 char in 1 line. Signed-off-by:
-
Kuninori Morimoto authored
audio-graph-card2 can reuse audio_graph_remove() / asoc_simple_remove(). This patch moves it to simple-card-utils.c. Signed-off-by:
-
Kuninori Morimoto authored
audio-graph-card2 can reuse audio_graph_card_probe(). This patch moves it to simple-card-utils.c. Signed-off-by:
-
Thierry Reding authored
struct link_info can grow fairly large and may cause the stack frame size to be exceeded when allocated on the stack. Some architectures such as 32-bit ARM, RISC-V or PowerPC have small stack frames where this causes a compiler warning, so allocate these structures on the heap instead of the stack. Fixes: 343e55e7 ("ASoC: simple-card-utils: Increase maximum number of links to 128") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Acked-by:
-
Jack Yu authored
Add support on format S32_LE for rt1015p. Signed-off-by:
Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/377f0ee05d514c66b567eb6385ac7753@realtek.comSigned-off-by:
-
- 19 Apr, 2021 10 commits
-
-
Mark Brown authored
Merge series "ASoC: rt286/rt298: Fixes for DMIC2 config and combo jack" from David Ward <david.ward@gatech.edu>: The last two patches in this series fix a longstanding issue that prevented the ALC3263 codec from using a headset mic. This codec can be found on Dell systems including the Latitude 13 7350, Venue 11 Pro 7140, and XPS 13 9343. In fact, there is an ACPI quirk for the XPS 13 9343, which forces it to use legacy HD Audio just to avoid this issue: https://lore.kernel.org/alsa-devel/CAPeXnHv07HkvcHrYFmZMr8OTp7U7F=k_k=LPYnUtp89iPn2d2Q@mail.gmail.com/ This may allow that ACPI quirk to be removed. Either way, the other systems mentioned above do not support this quirk and already use the ASoC driver, so this fix is necessary for headset mic support on those systems. Note: there is likely other handling for this codec that only exists in the HDA driver, but which also belongs in the ASoC driver. Commit 394c97f8 ("ALSA: hda/realtek - Change EAPD to verb control") describes an issue that does not seem to be resolved in the ASoC driver, to give an example. Other patches in this series are not specific to the ALC3263. These patches set the correct combo jack configuration when headphones are inserted, and fix a misaligned value set in the DMIC2 Configuration Default register. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=114171 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961Signed-off-by:
David Ward <david.ward@gatech.edu> David Ward (5): ASoC: rt286: Fix upper byte in DMIC2 configuration ASoC: rt286: Configure combo jack for headphones ASoC: rt298: Configure combo jack for headphones ASoC: rt286: Make RT286_SET_GPIO_* readable and writable ASoC: rt286: Generalize support for ALC3263 codec sound/soc/codecs/rt286.c | 34 +++++++++++++++++++++------------- sound/soc/codecs/rt298.c | 9 +++++++-- 2 files changed, 28 insertions(+), 15 deletions(-) -- 2.31.1
-
David Ward authored
The ALC3263 codec on the XPS 13 9343 is also found on the Latitude 13 7350 and Venue 11 Pro 7140. They require the same handling for the combo jack to work with a headset: GPIO pin 6 must be set. The HDA driver always sets this pin on the ALC3263, which it distinguishes by the codec vendor/device ID 0x10ec0288 and PCI subsystem vendor ID 0x1028 (Dell). The ASoC driver does not use PCI, so adapt this check to use DMI to determine if Dell is the system vendor. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961Signed-off-by:
-
David Ward authored
During jack detection, the combo jack is configured for a CTIA headset, and then for an OMTP headset, while sensing the mic connection. If a mic is not found in either case, the combo jack should be re-configured for headphones only. This is consistent with the HDA driver behavior. Signed-off-by:
-
David Ward authored
During jack detection, the combo jack is configured for a CTIA headset, and then for an OMTP headset, while sensing the mic connection. If a mic is not found in either case, the combo jack should be re-configured for headphones only. This is consistent with the HDA driver behavior. Signed-off-by:
-
Niklas Carlsson authored
The ALSA control readback functionality only works for non-volatile controls, i.e. control values that does not change on their own without driver interaction. This doesn't work for readbacks since the DSP firmware updates the control value. Disable the cache mechanism in the driver if the control name matches the prefix used for readbacks to ensure that the control value is valid. Signed-off-by:
Niklas Carlsson <niklasc@axis.com> Link: https://lore.kernel.org/r/20210419144901.9441-1-Niklas.Carlsson@axis.comSigned-off-by:
-
David Ward authored
The GPIO configuration cannot be applied if the registers are inaccessible. This prevented the headset mic from working on the Dell XPS 13 9343. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=114171Signed-off-by:
-
David Ward authored
This HDA verb sets the upper byte of the Configuration Default register, so only an 8-bit value should be used. For the rt298, the same fix was applied in commit f8f2dc4a ("ASoC: rt298: fix wrong setting of gpio2_en"). Signed-off-by:
-
Mark Brown authored
Merge series "ASoC: remove more cppcheck warnings" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: I missed those warnings in the previous rounds, they are mostly trivial and shouldn't change the behavior. Pierre-Louis Bossart (5): ASoC: soc-acpi: remove useless initialization ASoC: soc-core: fix signed/unsigned issue ASoC: soc-core: fix always-false condition ASoC: codecs: lpass-rx-macro: remove useless return ASoC: codecs: rt5682: clarify expression sound/soc/codecs/lpass-rx-macro.c | 2 -- sound/soc/codecs/rt5682.c | 2 +- sound/soc/soc-acpi.c | 2 +- sound/soc/soc-core.c | 7 +------ 4 files changed, 3 insertions(+), 10 deletions(-) -- 2.25.1
-
Viorel Suman authored
check the return value of ak4458_rstn_control. Signed-off-by:
-
Pierre-Louis Bossart authored
cppcheck warning: sound/soc/codecs/rt5682.c:2404:42: style: Boolean result is used in bitwise operation. Clarify expression with parentheses. [clarifyCondition] (pll_code.m_bp << RT5682_PLL_M_BP_SFT | RT5682_PLL_RST)); ^ Signed-off-by:Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20210416191144.27006-6-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
