1. 17 Jan, 2012 2 commits
  2. 16 Jan, 2012 7 commits
  3. 13 Jan, 2012 31 commits
    • Johannes Berg's avatar
      mac80211: fix no-op authorized transitions · 543d1b92
      Johannes Berg authored
      When userspace attempts to authorize a station
      that is already authorized, nothing happens as
      you'd expect. Similarly, when it unauthorizes
      a station that is associated, nothing happens.
      
      However, when it unauthorizes a station that
      isn't even associated yet, we erroneously try
      to move the station to associated. This seems
      to happen occasionally as a result of a race
      when wpa_supplicant attempts to unauthorize
      the port in managed mode. Particularly with my
      new patches to keep stations, it can then move
      a station into ASSOCIATED state before we have
      really associated, which is really confusing.
      
      I introduced this bug in
      "mac80211: refactor station state transitions"
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      543d1b92
    • Stanislaw Gruszka's avatar
      rt2800pci: fix spurious interrupts generation · dfd00c4c
      Stanislaw Gruszka authored
      Same devices can generate interrupt without properly setting bit in
      INT_SOURCE_CSR register (spurious interrupt), what will cause IRQ line
      will be disabled by interrupts controller driver.
      
      We discovered that clearing INT_MASK_CSR stops such behaviour. We
      previously first read that register, and then clear all know interrupt
      sources bits and do not touch reserved bits. After this patch, we write
      to all register content (I believe writing to reserved bits on that
      register will not cause any problems, I tested that on my rt2800pci
      device).
      
      This fix very bad performance problem, practically making device
      unusable (since worked without interrupts), reported in:
      https://bugzilla.redhat.com/show_bug.cgi?id=658451
      
      We previously tried to workaround that issue in commit
      4ba7d999 "rt2800pci: handle spurious
      interrupts", but it was reverted in commit
      82e5fc2a
      as thing, that will prevent to detect real spurious interrupts.
      Reported-and-tested-by: default avatarAmir Hedayaty <hedayaty@gmail.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarStanislaw Gruszka <sgruszka@redhat.com>
      Acked-by: default avatarGertjan van Wingerde <gwingerde@gmail.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      dfd00c4c
    • Dan Carpenter's avatar
      ipw2x00: signedness bug handling frame length · 92c1ff1f
      Dan Carpenter authored
      This is basically just a cleanup.  Large positive numbers get counted as
      negative but then get implicitly cast to positive again for the checks
      that matter.
      
      This does make a small difference in ipw_handle_promiscuous_rx() when we
      test "if (unlikely((len + IPW_RX_FRAME_SIZE) > skb_tailroom(rxb->skb)))"
      It should return there, but we don't return until a couple lines later
      when we test "if (len > IPW_RX_BUF_SIZE - sizeof(struct ipw_rt_hdr)) {".
      The difference is that in the second test the sizeof() means that there
      is an implied cast to unsigned.
      Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Reviewed-by: default avatarStanislaw Gruszka <sgruszka@redhat.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      92c1ff1f
    • Guennadi Liakhovetski's avatar
      wireless: b43: fix Oops on card eject during transfer · ccde8a45
      Guennadi Liakhovetski authored
      An Oops has once been observed, when the SDIO card had been ejected during
      IO. The PC value shows, that the dev pointer in b43_op_stop() was NULL.
      
      (I moved the NULL check before the lock, based upon a suggestion from
      Julian Calaby <julian.calaby@gmail.com>. -- JWL)
      Signed-off-by: default avatarGuennadi Liakhovetski <g.liakhovetski@gmx.de>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      ccde8a45
    • Linus Torvalds's avatar
      Merge branch 'akpm' (aka "Andrew's patch-bomb, take two") · 09946950
      Linus Torvalds authored
      Andrew explains:
      
       - various misc stuff
      
       - Most of the rest of MM: memcg, threaded hugepages, others.
      
       - cpumask
      
       - kexec
      
       - kdump
      
       - some direct-io performance tweaking
      
       - radix-tree optimisations
      
       - new selftests code
      
         A note on this: often people will develop a new userspace-visible
         feature and will develop userspace code to exercise/test that
         feature.  Then they merge the patch and the selftest code dies.
         Sometimes we paste it into the changelog.  Sometimes the code gets
         thrown into Documentation/(!).
      
         This saddens me.  So this patch creates a bare-bones framework which
         will henceforth allow me to ask people to include their test apps in
         the kernel tree so we can keep them alive.  Then when people enhance
         or fix the feature, I can ask them to update the test app too.
      
         The infrastruture is terribly trivial at present - let's see how it
         evolves.
      
       - checkpoint/restart feature work.
      
         A note on this: this is a project by various mad Russians to perform
         c/r mainly from userspace, with various oddball helper code added
         into the kernel where the need is demonstrated.
      
         So rather than some large central lump of code, what we have is
         little bits and pieces popping up in various places which either
         expose something new or which permit something which is normally
         kernel-private to be modified.
      
         The overall project is an ongoing thing.  I've judged that the size
         and scope of the thing means that we're more likely to be successful
         with it if we integrate the support into mainline piecemeal rather
         than allowing it all to develop out-of-tree.
      
         However I'm less confident than the developers that it will all
         eventually work! So what I'm asking them to do is to wrap each piece
         of new code inside CONFIG_CHECKPOINT_RESTORE.  So if it all
         eventually comes to tears and the project as a whole fails, it should
         be a simple matter to go through and delete all trace of it.
      
      This lot pretty much wraps up the -rc1 merge for me.
      
      * akpm: (96 commits)
        unlzo: fix input buffer free
        ramoops: update parameters only after successful init
        ramoops: fix use of rounddown_pow_of_two()
        c/r: prctl: add PR_SET_MM codes to set up mm_struct entries
        c/r: procfs: add start_data, end_data, start_brk members to /proc/$pid/stat v4
        c/r: introduce CHECKPOINT_RESTORE symbol
        selftests: new x86 breakpoints selftest
        selftests: new very basic kernel selftests directory
        radix_tree: take radix_tree_path off stack
        radix_tree: remove radix_tree_indirect_to_ptr()
        dio: optimize cache misses in the submission path
        vfs: cache request_queue in struct block_device
        fs/direct-io.c: calculate fs_count correctly in get_more_blocks()
        drivers/parport/parport_pc.c: fix warnings
        panic: don't print redundant backtraces on oops
        sysctl: add the kernel.ns_last_pid control
        kdump: add udev events for memory online/offline
        include/linux/crash_dump.h needs elf.h
        kdump: fix crash_kexec()/smp_send_stop() race in panic()
        kdump: crashk_res init check for /sys/kernel/kexec_crash_size
        ...
      09946950
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 7c17d86a
      Linus Torvalds authored
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits)
        pptp: Accept packet with seq zero
        RDS: Remove some unused iWARP code
        net: fsl: fec: handle 10Mbps speed in RMII mode
        drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c: add missing iounmap
        drivers/net/ethernet/tundra/tsi108_eth.c: add missing iounmap
        ksz884x: fix mtu for VLAN
        net_sched: sfq: add optional RED on top of SFQ
        dp83640: Fix NOHZ local_softirq_pending 08 warning
        gianfar: Fix invalid TX frames returned on error queue when time stamping
        gianfar: Fix missing sock reference when processing TX time stamps
        phylib: introduce mdiobus_alloc_size()
        net: decrement memcg jump label when limit, not usage, is changed
        net: reintroduce missing rcu_assign_pointer() calls
        inet_diag: Rename inet_diag_req_compat into inet_diag_req
        inet_diag: Rename inet_diag_req into inet_diag_req_v2
        bond_alb: don't disable softirq under bond_alb_xmit
        mac80211: fix rx->key NULL pointer dereference in promiscuous mode
        nl80211: fix old station flags compatibility
        mdio-octeon: use an unique MDIO bus name.
        mdio-gpio: use an unique MDIO bus name.
        ...
      7c17d86a
    • Sascha Hauer's avatar
      unlzo: fix input buffer free · 35f15268
      Sascha Hauer authored
      unlzo modifies the pointer to in_buf, so we have to free the original
      buffer, not the modified pointer.
      Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
      Cc: Lasse Collin <lasse.collin@tukaani.org>
      Cc: Namhyung Kim <namhyung@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      35f15268
    • Kees Cook's avatar
      ramoops: update parameters only after successful init · c755201e
      Kees Cook authored
      If a platform device exists on the system, but ramoops fails to attach to
      it, the module parameters are overridden before ramoops can fall back and
      try to use passed module parameters.  Move update to end of init routine.
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      Cc: Marco Stornelli <marco.stornelli@gmail.com>
      Cc: Sergiu Iordache <sergiu@chromium.org>
      Cc: Seiji Aguchi <seiji.aguchi@hds.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      c755201e
    • Marco Stornelli's avatar
      ramoops: fix use of rounddown_pow_of_two() · fdb59507
      Marco Stornelli authored
      The return value of rounddown_pow_of_two wasn't evaluated, so the
      operation was a no-op.
      Signed-off-by: default avatarMarco Stornelli <marco.stornelli@gmail.com>
      Reported-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Reviewed-by: default avatarWANG Cong <xiyou.wangcong@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      fdb59507
    • Cyrill Gorcunov's avatar
      c/r: prctl: add PR_SET_MM codes to set up mm_struct entries · 028ee4be
      Cyrill Gorcunov authored
      When we restore a task we need to set up text, data and data heap sizes
      from userspace to the values a task had at checkpoint time.  This patch
      adds auxilary prctl codes for that.
      
      While most of them have a statistical nature (their values are involved
      into calculation of /proc/<pid>/statm output) the start_brk and brk values
      are used to compute an allowed size of program data segment expansion.
      Which means an arbitrary changes of this values might be dangerous
      operation.  So to restrict access the following requirements applied to
      prctl calls:
      
       - The process has to have CAP_SYS_ADMIN capability granted.
       - For all opcodes except start_brk/brk members an appropriate
         VMA area must exist and should fit certain VMA flags,
         such as:
         - code segment must be executable but not writable;
         - data segment must not be executable.
      
      start_brk/brk values must not intersect with data segment and must not
      exceed RLIMIT_DATA resource limit.
      
      Still the main guard is CAP_SYS_ADMIN capability check.
      
      Note the kernel should be compiled with CONFIG_CHECKPOINT_RESTORE support
      otherwise these prctl calls will return -EINVAL.
      
      [akpm@linux-foundation.org: cache current->mm in a local, saving 200 bytes text]
      Signed-off-by: default avatarCyrill Gorcunov <gorcunov@openvz.org>
      Reviewed-by: default avatarKees Cook <keescook@chromium.org>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Andrew Vagin <avagin@openvz.org>
      Cc: Serge Hallyn <serge.hallyn@canonical.com>
      Cc: Pavel Emelyanov <xemul@parallels.com>
      Cc: Vasiliy Kulikov <segoon@openwall.com>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Michael Kerrisk <mtk.manpages@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      028ee4be
    • Cyrill Gorcunov's avatar
      c/r: procfs: add start_data, end_data, start_brk members to /proc/$pid/stat v4 · b3f7f573
      Cyrill Gorcunov authored
      The mm->start_code/end_code, mm->start_data/end_data, mm->start_brk are
      involved into calculation of program text/data segment sizes (which might
      be seen in /proc/<pid>/statm) and into brk() call final address.
      
      For restore we need to know all these values.  While
      mm->start_code/end_code already present in /proc/$pid/stat, the rest
      members are not, so this patch brings them in.
      
      The restore procedure of these members is addressed in another patch using
      prctl().
      Signed-off-by: default avatarCyrill Gorcunov <gorcunov@openvz.org>
      Acked-by: default avatarSerge Hallyn <serge.hallyn@canonical.com>
      Reviewed-by: default avatarKees Cook <keescook@chromium.org>
      Reviewed-by: default avatarKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Alexey Dobriyan <adobriyan@gmail.com>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Andrew Vagin <avagin@openvz.org>
      Cc: Vasiliy Kulikov <segoon@openwall.com>
      Cc: Alexey Dobriyan <adobriyan@gmail.com>
      Cc: "Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b3f7f573
    • Cyrill Gorcunov's avatar
      c/r: introduce CHECKPOINT_RESTORE symbol · 067bce1a
      Cyrill Gorcunov authored
      For checkpoint/restore we need auxilary features being compiled into the
      kernel, such as additional prctl codes, /proc/<pid>/map_files and etc...
      but same time these features are not mandatory for a regular kernel so
      CHECKPOINT_RESTORE config symbol should bring a way to disable them all at
      once if one wish to get rid of additional functionality.
      Signed-off-by: default avatarCyrill Gorcunov <gorcunov@openvz.org>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Andrew Vagin <avagin@openvz.org>
      Cc: Serge Hallyn <serge.hallyn@canonical.com>
      Cc: Vasiliy Kulikov <segoon@openwall.com>
      Reviewed-by: default avatarKees Cook <keescook@chromium.org>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Alexey Dobriyan <adobriyan@gmail.com>
      Cc: "Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      067bce1a
    • Frederic Weisbecker's avatar
      selftests: new x86 breakpoints selftest · 85bbddc3
      Frederic Weisbecker authored
      Bring a first selftest in the relevant directory.  This tests several
      combinations of breakpoints and watchpoints in x86, as well as icebp traps
      and int3 traps.  Given the amount of breakpoint regressions we raised
      after we merged the generic breakpoint infrastructure, such selftest
      became necessary and can still serve today as a basis for new patches that
      touch the do_debug() path.
      Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Jason Wessel <jason.wessel@windriver.com>
      Cc: Will Deacon <will.deacon@arm.com>
      Cc: Michal Marek <mmarek@suse.cz>
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      85bbddc3
    • Frederic Weisbecker's avatar
      selftests: new very basic kernel selftests directory · 274343ad
      Frederic Weisbecker authored
      Bring a new kernel selftests directory in tools/testing/selftests.  To
      add a new selftest, create a subdirectory with the sources and a
      makefile that creates a target named "run_test" then add the
      subdirectory name to the TARGET var in tools/testing/selftests/Makefile
      and tools/testing/selftests/run_tests script.
      
      This can help centralizing and maintaining any useful selftest that
      developers usually tend to let rust in peace on some random server.
      Suggested-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarFrederic Weisbecker <fweisbec@gmail.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Jason Wessel <jason.wessel@windriver.com>
      Cc: Will Deacon <will.deacon@arm.com>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Michal Marek <mmarek@suse.cz>
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      274343ad
    • Hugh Dickins's avatar
      radix_tree: take radix_tree_path off stack · e2bdb933
      Hugh Dickins authored
      Down, down in the deepest depths of GFP_NOIO page reclaim, we have
      shrink_page_list() calling __remove_mapping() calling __delete_from_
      swap_cache() or __delete_from_page_cache().
      
      You would not expect those to need much stack, but in fact they call
      radix_tree_delete(): which declares a 192-byte radix_tree_path array on
      its stack (to record the node,offsets it visits when descending, in case
      it needs to ascend to update them).  And if any tag is still set [1],
      that calls radix_tree_tag_clear(), which declares a further such
      192-byte radix_tree_path array on the stack.  (At least we have
      interrupts disabled here, so won't then be pushing registers too.)
      
      That was probably a good choice when most users were 32-bit (array of
      half the size), and adding fields to radix_tree_node would have bloated
      it unnecessarily.  But nowadays many are 64-bit, and each
      radix_tree_node contains a struct rcu_head, which is only used when
      freeing; whereas the radix_tree_path info is only used for updating the
      tree (deleting, clearing tags or setting tags if tagged) when a lock
      must be held, of no interest when accessing the tree locklessly.
      
      So add a parent pointer to the radix_tree_node, in union with the
      rcu_head, and remove all uses of the radix_tree_path.  There would be
      space in that union to save the offset when descending as before (we can
      argue that a lock must already be held to exclude other users), but
      recalculating it when ascending is both easy (a constant shift and a
      constant mask) and uncommon, so it seems better just to do that.
      
      Two little optimizations: no need to decrement height when descending,
      adjusting shift is enough; and once radix_tree_tag_if_tagged() has set
      tag on a node and its ancestors, it need not ascend from that node
      again.
      
      perf on the radix tree test harness reports radix_tree_insert() as 2%
      slower (now having to set parent), but radix_tree_delete() 24% faster.
      Surely that's an exaggeration from rtth's artificially low map shift 3,
      but forcing it back to 6 still rates radix_tree_delete() 8% faster.
      
      [1] Can a pagecache tag (dirty, writeback or towrite) actually still be
      set at the time of radix_tree_delete()? Perhaps not if the filesystem is
      well-behaved.  But although I've not tracked any stack overflow down to
      this cause, I have observed a curious case in which a dirty tag is set
      and left set on tmpfs: page migration's migrate_page_copy() happens to
      use __set_page_dirty_nobuffers() to set PageDirty on the newpage, and
      that sets PAGECACHE_TAG_DIRTY as a side-effect - harmless to a
      filesystem which doesn't use tags, except for this stack depth issue.
      Signed-off-by: default avatarHugh Dickins <hughd@google.com>
      Cc: Jan Kara <jack@suse.cz>
      Cc: Dave Chinner <david@fromorbit.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Nai Xia <nai.xia@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e2bdb933
    • Xiao Guangrong's avatar
      928da837
    • Andi Kleen's avatar
      dio: optimize cache misses in the submission path · 65dd2aa9
      Andi Kleen authored
      Some investigation of a transaction processing workload showed that a
      major consumer of cycles in __blockdev_direct_IO is the cache miss while
      accessing the block size.  This is because it has to walk the chain from
      block_dev to gendisk to queue.
      
      The block size is needed early on to check alignment and sizes.  It's only
      done if the check for the inode block size fails.  But the costly block
      device state is unconditionally fetched.
      
      - Reorganize the code to only fetch block dev state when actually
        needed.
      
      Then do a prefetch on the block dev early on in the direct IO path.  This
      is worth it, because there is substantial code run before we actually
      touch the block dev now.
      
      - I also added some unlikelies to make it clear the compiler that block
        device fetch code is not normally executed.
      
      This gave a small, but measurable improvement on a large database
      benchmark (about 0.3%)
      
      [akpm@linux-foundation.org: coding-style fixes]
      [sfr@canb.auug.org.au: using prefetch requires including prefetch.h]
      Signed-off-by: default avatarAndi Kleen <ak@linux.intel.com>
      Cc: Jeff Moyer <jmoyer@redhat.com>
      Cc: Jens Axboe <axboe@kernel.dk>
      Cc: Christoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarStephen Rothwell <sfr@canb.auug.org.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      65dd2aa9
    • Andi Kleen's avatar
      vfs: cache request_queue in struct block_device · 87192a2a
      Andi Kleen authored
      This makes it possible to get from the inode to the request_queue with one
      less cache miss.  Used in followon optimization.
      
      The livetime of the pointer is the same as the gendisk.
      
      This assumes that the queue will always stay the same in the gendisk while
      it's visible to block_devices.  I think that's safe correct?
      Signed-off-by: default avatarAndi Kleen <ak@linux.intel.com>
      Acked-by: default avatarJeff Moyer <jmoyer@redhat.com>
      Cc: Jens Axboe <axboe@kernel.dk>
      Cc: Christoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      87192a2a
    • Tao Ma's avatar
      fs/direct-io.c: calculate fs_count correctly in get_more_blocks() · ae55e1aa
      Tao Ma authored
      In get_more_blocks(), we use dio_count to calcuate fs_count and do some
      tricky things to increase fs_count if dio_count isn't aligned.  But
      actually it still has some corner cases that can't be coverd.  See the
      following example:
      
      	dio_write foo -s 1024 -w 4096
      
      (direct write 4096 bytes at offset 1024).  The same goes if the offset
      isn't aligned to fs_blocksize.
      
      In this case, the old calculation counts fs_count to be 1, but actually we
      will write into 2 different blocks (if fs_blocksize=4096).  The old code
      just works, since it will call get_block twice (and may have to allocate
      and create extents twice for filesystems like ext4).  So we'd better call
      get_block just once with the proper fs_count.
      Signed-off-by: default avatarTao Ma <boyu.mt@taobao.com>
      Cc: "Theodore Ts'o" <tytso@mit.edu>
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ae55e1aa
    • Andrew Morton's avatar
      drivers/parport/parport_pc.c: fix warnings · 45dac90f
      Andrew Morton authored
      drivers/parport/parport_pc.c: In function '__check_irq':
      drivers/parport/parport_pc.c:3415: warning: return from incompatible pointer type
      drivers/parport/parport_pc.c: In function '__check_dma':
      drivers/parport/parport_pc.c:3417: warning: return from incompatible pointer type
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      45dac90f
    • Andi Kleen's avatar
      panic: don't print redundant backtraces on oops · 6e6f0a1f
      Andi Kleen authored
      When an oops causes a panic and panic prints another backtrace it's pretty
      common to have the original oops data be scrolled away on a 80x50 screen.
      
      The second backtrace is quite redundant and not needed anyways.
      
      So don't print the panic backtrace when oops_in_progress is true.
      
      [akpm@linux-foundation.org: add comment]
      Signed-off-by: default avatarAndi Kleen <ak@linux.intel.com>
      Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6e6f0a1f
    • Pavel Emelyanov's avatar
      sysctl: add the kernel.ns_last_pid control · b8f566b0
      Pavel Emelyanov authored
      The sysctl works on the current task's pid namespace, getting and setting
      its last_pid field.
      
      Writing is allowed for CAP_SYS_ADMIN-capable tasks thus making it possible
      to create a task with desired pid value.  This ability is required badly
      for the checkpoint/restore in userspace.
      
      This approach suits all the parties for now.
      Signed-off-by: default avatarPavel Emelyanov <xemul@parallels.com>
      Acked-by: default avatarTejun Heo <tj@kernel.org>
      Cc: Oleg Nesterov <oleg@redhat.com>
      Cc: Cyrill Gorcunov <gorcunov@openvz.org>
      Cc: "Eric W. Biederman" <ebiederm@xmission.com>
      Cc: Serge Hallyn <serue@us.ibm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b8f566b0
    • Michael Holzheu's avatar
      kdump: add udev events for memory online/offline · f5138e42
      Michael Holzheu authored
      Currently no udev events for memory hotplug "online" and "offline" are
      generated:
      
        # udevadm monitor
        # echo offline > /sys/devices/system/memory/memory4/state
        ==> No event
      
      When kdump is loaded, kexec detects the current memory configuration and
      stores it in the pre-allocated ELF core header.  Therefore, for kdump it
      is necessary to reload the kdump kernel with kexec when the memory
      configuration changes (e.g.  for online/offline hotplug memory).
      
      In order to do this automatically, udev rules should be used.  This kernel
      patch adds udev events for "online" and "offline".  Together with this
      kernel patch, the following udev rules for online/offline have to be added
      to "/etc/udev/rules.d/98-kexec.rules":
      
        SUBSYSTEM=="memory", ACTION=="online", PROGRAM="/etc/init.d/kdump restart"
        SUBSYSTEM=="memory", ACTION=="offline", PROGRAM="/etc/init.d/kdump restart"
      
      [sfr@canb.auug.org.au: fixups for class to subsystem conversion]
      Signed-off-by: default avatarMichael Holzheu <holzheu@linux.vnet.ibm.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: Vivek Goyal <vgoyal@redhat.com>
      Cc: "Eric W. Biederman" <ebiederm@xmission.com>
      Cc: Kay Sievers <kay.sievers@vrfy.org>
      Cc: Dave Hansen <haveblue@us.ibm.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Greg KH <greg@kroah.com>
      Signed-off-by: default avatarStephen Rothwell <sfr@canb.auug.org.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f5138e42
    • Fabio Estevam's avatar
      include/linux/crash_dump.h needs elf.h · 1f536b9e
      Fabio Estevam authored
      Building an ARM target we get the following warnings:
      
        CC      arch/arm/kernel/setup.o
        In file included from arch/arm/kernel/setup.c:39:
        arch/arm/include/asm/elf.h:102:1: warning: "vmcore_elf64_check_arch" redefined
        In file included from arch/arm/kernel/setup.c:24:
        include/linux/crash_dump.h:30:1: warning: this is the location of the previous definition
      
      Quoting Russell King:
      
      "linux/crash_dump.h makes no attempt to include asm/elf.h, but it depends
      on stuff in asm/elf.h to determine how stuff inside this file is defined
      at parse time.
      
      So, if asm/elf.h is included after linux/crash_dump.h or not at all, you
      get a different result from the situation where asm/elf.h is included
      before."
      
      So add elf.h header to crash_dump.h to avoid this problem.
      
      The original discussion about this can be found at:
      http://www.spinics.net/lists/arm-kernel/msg154113.htmlSigned-off-by: default avatarFabio Estevam <fabio.estevam@freescale.com>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Cc: <stable@vger.kernel.org>	[3.2.1]
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1f536b9e
    • Michael Holzheu's avatar
      kdump: fix crash_kexec()/smp_send_stop() race in panic() · 93e13a36
      Michael Holzheu authored
      When two CPUs call panic at the same time there is a possible race
      condition that can stop kdump.  The first CPU calls crash_kexec() and the
      second CPU calls smp_send_stop() in panic() before crash_kexec() finished
      on the first CPU.  So the second CPU stops the first CPU and therefore
      kdump fails:
      
      1st CPU:
        panic()->crash_kexec()->mutex_trylock(&kexec_mutex)-> do kdump
      
      2nd CPU:
        panic()->crash_kexec()->kexec_mutex already held by 1st CPU
             ->smp_send_stop()-> stop 1st CPU (stop kdump)
      
      This patch fixes the problem by introducing a spinlock in panic that
      allows only one CPU to process crash_kexec() and the subsequent panic
      code.
      
      All other CPUs call the weak function panic_smp_self_stop() that stops the
      CPU itself.  This function can be overloaded by architecture code.  For
      example "tile" can use their lower-power "nap" instruction for that.
      Signed-off-by: default avatarMichael Holzheu <holzheu@linux.vnet.ibm.com>
      Acked-by: default avatarChris Metcalf <cmetcalf@tilera.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      93e13a36
    • Michael Holzheu's avatar
      kdump: crashk_res init check for /sys/kernel/kexec_crash_size · bec013c4
      Michael Holzheu authored
      Currently it is possible to set the crash_size via the sysfs
      /sys/kernel/kexec_crash_size even if no crash kernel memory has been
      defined with the "crashkernel" parameter.  In this case "crashk_res" is
      not initialized and crashk_res.start = crashk_res.end = 0.  Unfortunately
      resource_size(&crashk_res) returns 1 in this case.  This breaks the s390
      implementation of crash_(un)map_reserved_pages().
      
      To fix the problem the correct "old_size" is now calculated in
      crash_shrink_memory().  "old_size is set to "0" if crashk_res is not
      initialized.  With this change crash_shrink_memory() will do nothing, when
      "crashk_res" is not initialized.  It will return "0" for "echo 0 >
      /sys/kernel/kexec_crash_size" and -EINVAL for "echo [not zero] >
      /sys/kernel/kexec_crash_size".
      
      In addition to that this patch also simplifies the "ret = -EINVAL" vs.
      "ret = 0" logic as suggested by Simon Horman.
      Signed-off-by: default avatarMichael Holzheu <holzheu@linux.vnet.ibm.com>
      Reviewed-by: default avatarDave Young <dyoung@redhat.com>
      Reviewed-by: default avatarWANG Cong <xiyou.wangcong@gmail.com>
      Reviewed-by: default avatarSimon Horman <horms@verge.net.au>
      Cc: Vivek Goyal <vgoyal@redhat.com>
      Cc: "Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      bec013c4
    • Michael Holzheu's avatar
      kdump: add missing RAM resource in crash_shrink_memory() · 6480e5a0
      Michael Holzheu authored
      When shrinking crashkernel memory using /sys/kernel/kexec_crash_size for
      the newly added memory no RAM resource is created at the moment.
      
      Example:
      
        $ cat /proc/iomem
        00000000-bfffffff : System RAM
          00000000-005b7ac3 : Kernel code
          005b7ac4-009743bf : Kernel data
          009bb000-00a85c33 : Kernel bss
        c0000000-cfffffff : Crash kernel
        d0000000-ffffffff : System RAM
      
        $ echo 0 > /sys/kernel/kexec_crash_size
        $ cat /proc/iomem
        00000000-bfffffff : System RAM
          00000000-005b7ac3 : Kernel code
          005b7ac4-009743bf : Kernel data
          009bb000-00a85c33 : Kernel bss
                                         <<-- here is System RAM missing
        d0000000-ffffffff : System RAM
      
      One result of this bug is that the memory chunk can never be set offline
      using memory hotplug.  With this patch I insert a new "System RAM"
      resource for the released memory.  Then the upper example looks like the
      following:
      
        $ echo 0 > /sys/kernel/kexec_crash_size
        $ cat /proc/iomem
        00000000-bfffffff : System RAM
          00000000-005b7ac3 : Kernel code
          005b7ac4-009743bf : Kernel data
          009bb000-00a85c33 : Kernel bss
        c0000000-cfffffff : System RAM   <<-- new rescoure
        d0000000-ffffffff : System RAM
      
      And now I can set chunk c0000000-cfffffff offline.
      Signed-off-by: default avatarMichael Holzheu <holzheu@linux.vnet.ibm.com>
      Cc: Vivek Goyal <vgoyal@redhat.com>
      Cc: "Eric W. Biederman" <ebiederm@xmission.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6480e5a0
    • WANG Cong's avatar
      kexec: remove KMSG_DUMP_KEXEC · a3dd3323
      WANG Cong authored
      KMSG_DUMP_KEXEC is useless because we already save kernel messages inside
      /proc/vmcore, and it is unsafe to allow modules to do other stuffs in a
      crash dump scenario.
      
      [akpm@linux-foundation.org: fix powerpc build]
      Signed-off-by: default avatarWANG Cong <xiyou.wangcong@gmail.com>
      Reported-by: default avatarVivek Goyal <vgoyal@redhat.com>
      Acked-by: default avatarVivek Goyal <vgoyal@redhat.com>
      Acked-by: default avatarJarod Wilson <jarod@redhat.com>
      Cc: "Eric W. Biederman" <ebiederm@xmission.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      a3dd3323
    • Wanlong Gao's avatar
      cpumask: update setup_node_to_cpumask_map() comments · 9512938b
      Wanlong Gao authored
      node_to_cpumask() has been replaced by cpumask_of_node(), and wholly
      removed since commit 29c337a0 ("cpumask: remove obsolete node_to_cpumask
      now everyone uses cpumask_of_node").
      
      So update the comments for setup_node_to_cpumask_map().
      Signed-off-by: default avatarWanlong Gao <gaowanlong@cn.fujitsu.com>
      Acked-by: default avatarRusty Russell <rusty@rustcorp.com.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      9512938b
    • Kautuk Consul's avatar
      mm/vmalloc.c: eliminate extra loop in pcpu_get_vm_areas error path · f1db7afd
      Kautuk Consul authored
      If either of the vas or vms arrays are not properly kzalloced, then the
      code jumps to the err_free label.
      
      The err_free label runs a loop to check and free each of the array members
      of the vas and vms arrays which is not required for this situation as none
      of the array members have been allocated till this point.
      
      Eliminate the extra loop we have to go through by introducing a new label
      err_free2 and then jumping to it.
      
      [akpm@linux-foundation.org: remove now-unneeded tests]
      Signed-off-by: default avatarKautuk Consul <consul.kautuk@gmail.com>
      Acked-by: default avatarDavid Rientjes <rientjes@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f1db7afd
    • Hugh Dickins's avatar
      mm: rearrange putback_inactive_pages · 3f79768f
      Hugh Dickins authored
      There is sometimes confusion between the global putback_lru_pages() in
      migrate.c and the static putback_lru_pages() in vmscan.c: rename the
      latter putback_inactive_pages(): it helps shrink_inactive_list() rather as
      move_active_pages_to_lru() helps shrink_active_list().
      
      Remove unused scan_control arg from putback_inactive_pages() and from
      update_isolated_counts().  Move clear_active_flags() inside
      update_isolated_counts().  Move NR_ISOLATED accounting up into
      shrink_inactive_list() itself, so the balance is clearer.
      
      Do the spin_lock_irq() before calling putback_inactive_pages() and
      spin_unlock_irq() after return from it, so that it better matches
      update_isolated_counts() and move_active_pages_to_lru().
      Signed-off-by: default avatarHugh Dickins <hughd@google.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      3f79768f