- 26 Jun, 2006 40 commits
-
-
Mark Fasheh authored
Reported by Andrew Morton. Signed-off-by:Mark Fasheh <mark.fasheh@oracle.com>
-
Joel Becker authored
The OCFS2 DLM allocates a number of pages for a hash to lookup locks. There was a bug where a PAGE_SIZE bigger than the hash size (eg, 64K pages) would result in zero pages allocated. Signed-off-by:
Joel Becker <joel.becker@oracle.com> Signed-off-by:
-
Daniel Phillips authored
This allows us to have a hash table greater than a single page which greatly improves dlm performance on some tests. Signed-off-by:
Daniel Phillips <phillips@google.com> Signed-off-by:
-
Mark Fasheh authored
It's called on every lookup so this might help performance a bit. Signed-off-by: -
Daniel Phillips authored
Signed-Off-By:
-
Mark Fasheh authored
Fixes a performance bug - pointed out by Andrew. Signed-off-by: -
Mark Fasheh authored
Gains us a bit of performance on loads which heavily hit the lockres hash. Patch suggested by Daniel Phillips <phillips@google.com>. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: typo fixes Clean up 'inline is not at beginning' warnings for usb storage Storage class should be first i386: Trivial typo fixes ixj: make ixj_set_tone_off() static spelling fixes fix paniced->panicked typos Spelling fixes for Documentation/atomic_ops.txt move acknowledgment for Mark Adler to CREDITS remove the bouncing email address of David Campbell
-
Karsten Keil authored
The changes in the tty handling contain a bug while accessing the last byte in the skb. Since special sequence for control of DTMF and FAX via ttyI* devices handled via this path, these services do not work anymore. Signed-off-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Eric Sesterhenn authored
This was spotted by coverity #id 1300. Since the array has only four elements, we should just use those four. Signed-off-by:
Eric Sesterhenn <snakebyte@gmx.de> Acked-by:
Sean Hefty <sean.hefty@intel.com> Signed-off-by:
-
Linus Torvalds authored
This reverts commit c7b2eff0. Hugh Dickins explains: "It seems too little tested: "losetup -d /dev/loop0" fails with EINVAL because nothing sets lo_thread; but even when you patch loop_thread() to set lo->lo_thread = current, it can't survive more than a few dozen iterations of the loop below (with a tmpfs mounted on /tst): j=0 cp /dev/zero /tst while : do let j=j+1 echo "Doing pass $j" losetup /dev/loop0 /tst/zero mkfs -t ext2 -b 1024 /dev/loop0 >/dev/null 2>&1 mount -t ext2 /dev/loop0 /mnt umount /mnt losetup -d /dev/loop0 done it collapses with failed ioctl then BUG_ON(!bio). I think the original lo_done completion was more subtle and safe than the kthread conversion has allowed for." Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (40 commits) kbuild: trivial fixes in Makefile kbuild: adding symbols in Kconfig and defconfig to TAGS kbuild: replace abort() with exit(1) kbuild: support for %.symtypes files kbuild: fix silentoldconfig recursion kbuild: add option for stripping modules while installing them kbuild: kill some false positives from modpost kbuild: export-symbol usage report generator kbuild: fix make -rR breakage kbuild: append -dirty for updated but uncommited changes kbuild: append git revision for all untagged commits kbuild: fix module.symvers parsing in modpost kbuild: ignore make's built-in rules & variables kbuild: bugfix with initramfs kbuild: modpost build fix kbuild: check license compatibility when building modules kbuild: export-type enhancement to modpost.c kbuild: add dependency on kernel.release to the package targets kbuild: `make kernelrelease' speedup kconfig: KCONFIG_OVERWRITECONFIG ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] tcrypt: Forbid tcrypt from being built-in [CRYPTO] aes: Add wrappers for assembly routines [CRYPTO] tcrypt: Speed benchmark support for digest algorithms [CRYPTO] tcrypt: Return -EAGAIN from module_init() [CRYPTO] api: Allow replacement when registering new algorithms [CRYPTO] api: Removed const from cra_name/cra_driver_name [CRYPTO] api: Added cra_init/cra_exit [CRYPTO] api: Fixed incorrect passing of context instead of tfm [CRYPTO] padlock: Rearrange context structure to reduce code size [CRYPTO] all: Pass tfm instead of ctx to algorithms [CRYPTO] digest: Remove unnecessary zeroing during init [CRYPTO] aes-i586: Get rid of useless function wrappers [CRYPTO] digest: Add alignment handling [CRYPTO] khazad: Use 32-bit reads on key
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/dtor/input: Input: iforce - remove some pointless casts Input: psmouse - add support for Intellimouse 4.0 Input: atkbd - fix HANGEUL/HANJA keys Input: fix misspelling of Hangeul key Input: via-pmu - add input device support Input: rearrange exports Input: fix formatting to better follow CodingStyle Input: reset name, phys and uniq when unregistering Input: return correct size when reading modalias attribute Input: change my e-mail address in MAINTAINERS file Input: fix potential overflows in driver/input/keyboard Input: fix potential overflows in driver/input/touchscreen Input: fix potential overflows in driver/input/joystick Input: fix potential overflows in driver/input/mouse Input: fix accuracy of fixp-arith.h Input: iforce - use ENOSPC instead of ENOMEM Input: constify drivers/char/keyboard.c
-
Greg Ungerer authored
Remove board specific base RAM conditionals from page_offset.h With the Kconfig time configurable RAM setup none of this is required. It is all based on the Kconfig (CONFIG_RAMBASE) option now. Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
-
Greg Ungerer authored
Change to using a configurable RAM setup in startup code. This cleans up the whole RAM base/sizing issue, and removes a lot of board specific code. Signed-off-by:
-
Greg Ungerer authored
Remove the fixed RAM configurations for each board type from the linker script. Replace with simple defines usng the flexible RAM configuration options. This cleans out of lot of board specific munging of addresses. Signed-off-by:
-
Greg Ungerer authored
Reworked the way RAM regions are defined. Instead of coding all the variations for each board type we now just configure RAM base and size in the usual Kconfig setup. This much simplifies the code, and makes it a lot more flexible when setting up new boards or board varients. Signed-off-by:
-
Greg Ungerer authored
Clean out unused variable definitions from 68328 start up code. Also use a more appropriate start address for the case of relocating the kernel code to RAM (from ROM/flash). Signed-off-by:
-
Greg Ungerer authored
__ramvec has been removed from the linker script. The vector base address is defined as a configurable option, use that. Remove its use from the 68328/pilot startup code. Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (4227): Update this driver for recent header file movement. V4L/DVB (4223): Add V4L2_CID_MPEG_STREAM_VBI_FMT control V4L/DVB (4222): Always switch tuner mode when calling VIDIOC_S_FREQUENCY. V4L/DVB (4221): Add HM12 YUV format define. V4L/DVB (4219): Av7110: analog sound output of DVB-C rev 2.3 V4L/DVB (4217): Fix a misplaced closing bracket/else, which caused swzigzag not to be called V4L/DVB (4215): Make VIDEO_CX88_BLACKBIRD a separate build option V4L/DVB (4214): Make VIDEO_CX2341X a selectable build option V4L/DVB (4213): Cx88: cleanups V4L/DVB (4211): Fix an Oops for all fe that have get_frontend_algo == NULL
-
Linus Torvalds authored
* x86-64: (83 commits) [PATCH] x86_64: x86_64 stack usage debugging [PATCH] x86_64: (resend) x86_64 stack overflow debugging [PATCH] x86_64: msi_apic.c build fix [PATCH] x86_64: i386/x86-64 Add nmi watchdog support for new Intel CPUs [PATCH] x86_64: Avoid broadcasting NMI IPIs [PATCH] x86_64: fix apic error on bootup [PATCH] x86_64: enlarge window for stack growth [PATCH] x86_64: Minor string functions optimizations [PATCH] x86_64: Move export symbols to their C functions [PATCH] x86_64: Standardize i386/x86_64 handling of NMI_VECTOR [PATCH] x86_64: Fix modular pc speaker [PATCH] x86_64: remove sys32_ni_syscall() [PATCH] x86_64: Do not use -ffunction-sections for modules [PATCH] x86_64: Add cpu_relax to apic_wait_icr_idle [PATCH] x86_64: adjust kstack_depth_to_print default [PATCH] i386/x86-64: adjust /proc/interrupts column headings [PATCH] x86_64: Fix race in cpu_local_* on preemptible kernels [PATCH] x86_64: Fix fast check in safe_smp_processor_id [PATCH] x86_64: x86_64 setup.c - printing cmp related boottime information [PATCH] i386/x86-64/ia64: Move polling flag into thread_info_status ... Manual resolve of trivial conflict in arch/i386/kernel/Makefile
-
Eric Sandeen authored
Applies to git & 2.6.17-rc6 after CONFIG_DEBUG_STACKOVERFLOW patch uses same stack-zeroing mechanism as on i386 to discover maximum stack excursions. Signed-off-by:
Eric Sandeen <sandeen@sgi.com> Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Eric Sandeen authored
Take two, now without spurious whitespace :( Applies to git & 2.6.17-rc6 CONFIG_DEBUG_STACKOVERFLOW existed for x86_64 in 2.4, but seems to have gone AWOL in 2.6. I've pretty much just copied this over from the 2.4 code, with appropriate tweaks for the 2.6 kernel, plus a bugfix. I'd personally rather see it printed out the way other arches do it, i.e. bytes-remaining-until-overflow, rather than having to do the subtraction yourself. Also, only 128 bytes remaining seems awfully late to issue a warning. But I'll start here :) Signed-off-by:
-
Christian Kujau authored
CC drivers/pci/msi-apic.o In file included from include/asm/msi.h:11, from drivers/pci/msi.h:71, from drivers/pci/msi-apic.c:8: include/asm/smp.h:103: error: syntax error before '->' token akpm: nasty. It appears to be static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask) conflicting with include/asm-x86_64/mach_apic.h's #define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid) And I don't know which patch in rc4-mm1 triggered this. Fixing this in the .c file seems wrong. Including asm/smp.h instead of linux/smp.h seems wrong too. Need that .config. Cc: Andi Kleen <ak@muc.de> Signed-off-by:Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Venkatesh Pallipadi authored
Intel now has support for Architectural Performance Monitoring Counters ( Refer to IA-32 Intel Architecture Software Developer's Manual http://www.intel.com/design/pentium4/manuals/253669.htm ). This feature is present starting from Intel Core Duo and Intel Core Solo processors. What this means is, the performance monitoring counters and some performance monitoring events are now defined in an architectural way (using cpuid). And there will be no need to check for family/model etc for these architectural events. Below is the patch to use this performance counters in nmi watchdog driver. Patch handles both i386 and x86-64 kernels. Signed-off-by:
Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by:
-
Keith Owens authored
On some i386/x86_64 systems, sending an NMI IPI as a broadcast will reset the system. This seems to be a BIOS bug which affects machines where one or more cpus are not under OS control. It occurs on HT systems with a version of the OS that is not compiled without HT support. It also occurs when a system is booted with max_cpus=n where 2 <= n < cpus known to the BIOS. The fix is to always send NMI IPI as a mask instead of as a broadcast. Signed-off-by:
Keith Owens <kaos@sgi.com> Signed-off-by:
-
Siddha, Suresh B authored
Appended patch fixes the "APIC error on CPUX: 00(40)" observed during bootup. From SDM Vol-3A "Valid Interrupt Vectors" section: "When an illegal vector value (0-15) is written to an LVT entry and the delivery mode is Fixed, the APIC may signal an illegal vector error, with out regard to whether the mask bit is set or whether an interrupt is actually seen on input." Signed-off-by:
Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by:
-
Chuck Ebbert authored
Allow stack growth so the 'enter' instruction works. Also fixes problem in compat_sys_kexec_load() which could allocate more than 128 bytes using compat_alloc_user_space(). Signed-off-by:
Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by:
-
Andi Kleen authored
- Use tail call from clear_user to __clear_user to save some code size - Use standard memcpy for forward memmove Signed-off-by:
-
Andi Kleen authored
Only exports for assembler files are left in x8664_ksyms.c Originally inspired by a patch from Al Viro Signed-off-by:
-
Keith Owens authored
x86_64 and i386 behave inconsistently when sending an IPI on vector 2 (NMI_VECTOR). Make both behave the same, so IPI 2 is sent as NMI. The crash code was abusing send_IPI_allbutself() by passing a code instead of a vector, it only worked because crash knew about the internal code of send_IPI_allbutself(). Change crash to use NMI_VECTOR instead, and remove the comment about how crash was abusing the function. This patch is a pre-requisite for fixing the problem where sending an IPI as NMI would reboot some Dell Xeon systems. I cannot fix that problem while crash continus to abuse send_IPI_allbutself(). It also removes the inconsistency between i386 and x86_64 for NMI_VECTOR. That will simplify all the RAS code that needs to bring all the cpus to a clean stop, even when one or more cpus are spinning disabled. Signed-off-by:
-
Piotr Kaczuba authored
It turned out that the following change is needed when the speaker is compiled as a module. Signed-off-by:
-
Adrian Bunk authored
This patch removes the no longer used sys32_ni_syscall() Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Sergey Vlasov authored
Currently CONFIG_REORDER uses -ffunction-sections for all code; however, creating a separate section for each function is not useful for modules and just adds bloat. Moving this option from CFLAGS to CFLAGS_KERNEL shrinks module object files (e.g., the module tree for a kernel built with most drivers as modules shrinked from 54M to 46M), and decreases the number of sysfs files in /sys/module/*/sections/ directories. Signed-off-by:
Sergey Vlasov <vsu@altlinux.ru> Signed-off-by:
-
Andreas Mohr authored
This one is adding a cpu_relax() that already existed in the i386 version. Signed-off-by:
Andreas Mohr <andi@lisas.de> Signed-off-by:
-
Jan Beulich authored
Defaulting to a value not evenly divisible by four makes little sense, as four values are displayed per line (and hence the rest of the line would otherwise be wasted). Signed-off-by:
Jan Beulich <jbeulich@novell.com> Signed-off-by:
-
Jan Beulich authored
With (significantly) more than 10 CPUs online, the column headings drifted off the positions of the column contents with growing CPU numbers. Signed-off-by:
-
Andi Kleen authored
When a process changes CPUs while doing the non atomic cpu_local_* operations it might operate on the local_t of a different CPUs. Fix that by disabling preemption. Pointed out by Christopher Lameter Signed-off-by:
-
Andi Kleen authored
The APIC ID returned by hard_smp_processor_id can be beyond NR_CPUS and then overflow the x86_cpu_to_apic[] array. Add a check for overflow. If it happens then the slow loop below will catch. Bug pointed out by Doug Thompson Signed-off-by:
-
