- 24 Nov, 2022 5 commits
-
-
Anastasia Kovaleva authored
To determine how many blocks sends in one command, the minimum value is selected from the hw_max_sectors of both devices. In target_xcopy_do_work, hw_max_sectors are used as blocks, not sectors; it also ignores the fact that sectors can be of different sizes, for example 512 and 4096 bytes. Because of this, a number of blocks can be transmitted that the device will not be able to accept. Change the selection of max transmission size into bytes. Reviewed-by:
Konstantin Shelekhin <k.shelekhin@yadro.com> Reviewed-by:
Dmitriy Bogdanov <d.bogdanov@yadro.com> Signed-off-by:
Anastasia Kovaleva <a.kovaleva@yadro.com> Link: https://lore.kernel.org/r/20221114102500.88892-4-a.kovaleva@yadro.comReviewed-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Anastasia Kovaleva authored
By default, hw_max_sectors stores its value in 512 blocks in iblock, despite the fact that the block size can be 4096 bytes. Change hw_max_sectors to store the number of sectors in hw_block_size blocks. Reviewed-by:
-
Anastasia Kovaleva authored
A MAXIMUM TRANSFER LENGTH value indicates the maximum transfer length in logical blocks that the device server accepts for a single command. Fix function sending the length in sectors instead of blocks. This patch also removes the special casing for fileio in block_size_store since this logic in now unified in spc_emulate_evpd_b0() for all backends. Reviewed-by:
-
Thomas Gleixner authored
Nothing in this file needs anything from linux/msi.h Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20221113202428.436270297@linutronix.de Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Reviewed-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
Justin Tee authored
Update lpfc version to 14.2.0.9. Signed-off-by:
Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20221116011921.105995-7-justintee8345@gmail.comSigned-off-by:
-
- 17 Nov, 2022 17 commits
-
-
Justin Tee authored
When a FLOGI completes with a sequence timeout error, a freed kref ptr dereference crash can occur due to a timing race involving ndlp referencing in lpfc_dev_loss_tmo_callbk. Fix by ensuring the driver accounts for an outstanding FLOGI when dev_loss is active. Also, don't remove the HBA_FLOGI_OUTSTANDING flag when the FLOGI is retried to allow the driver to handle the reference counts correctly in lpfc_dev_loss_tmo_handler. Reported-by:
Dietmar Hahn <dietmar.hahn@fujitsu.com> Tested-by:
-
Justin Tee authored
The dynamic mi_ver value holds the currently configured MI setting. mi_ver was being displayed as part of the cmf_info sysfs attribute, when the output string meant to display MI capabilities instead. Add a mi_cap member in the lpfc_pc_sli4_params structure that will store MI capabilities during initialization so that cmf_info prints out capabilities instead of current configuration. Signed-off-by:
-
Justin Tee authored
The lpfc_cmf_timer adjusts phba->cmf_link_byte_count periodically and can artifically inflate bandwidth percent. During bandwidth calculation, correct for this by setting a cap of logging a maximum of 100%. Bandwidth calculation is only used for display under LOG_CGN_MGMT so there is no expectation of impacts on performance. Signed-off-by:
-
Justin Tee authored
Adapter configurations with limited EQ resources may fail to initialize. Firmware resources are queried in lpfc_sli4_read_config(). The driver parameters cfg_irq_chann and cfg_hdw_queue are adjusted from defaults if constrained by firmware resources. The minimum resource check includes a special allocation for queues such as ELS, MBOX, NVME LS. However the additional reservation was also incorrectly applied to EQ resources. Reordered WQ|CQ|EQ resource checks to apply the special allocation adjustment to WQ and CQ resources only. Signed-off-by:
-
Gustavo A. R. Silva authored
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in struct fdmi_attr_s. Important to mention is that doing a build before/after this patch results in no binary output differences. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/209 Link: https://github.com/KSPP/linux/issues/79 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/Y3P1rEEBq7HzJygq@workReviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Colin Ian King authored
Variable ev_qual is being assigned and modified but the end result is never used. The variable is redundant and can be removed. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20221111170824.558250-1-colin.i.king@gmail.comSigned-off-by:
-
Xiu Jianfeng authored
Use memset_startat() helper to simplify the code, no functional changes in this patch. Signed-off-by:
Xiu Jianfeng <xiujianfeng@huawei.com> Link: https://lore.kernel.org/r/20221111074310.132125-1-xiujianfeng@huawei.comReviewed-by:
-
Harshit Mogalapalli authored
As 'lbdof_blen' is coming from user, if the size in kzalloc() is >= MAX_ORDER then we hit a warning. Call trace: sg_ioctl sg_ioctl_common scsi_ioctl sg_scsi_ioctl blk_execute_rq blk_mq_sched_insert_request blk_mq_run_hw_queue __blk_mq_delay_run_hw_queue __blk_mq_run_hw_queue blk_mq_sched_dispatch_requests __blk_mq_sched_dispatch_requests blk_mq_dispatch_rq_list scsi_queue_rq scsi_dispatch_cmd scsi_debug_queuecommand schedule_resp resp_write_scat If you try to allocate a memory larger than(>=) MAX_ORDER, then kmalloc() will definitely fail. It creates a stack trace and messes up dmesg. The user controls the size here so if they specify a too large size it will fail. Add __GFP_NOWARN in order to avoid too large allocation warning. This is detected by static analysis using smatch. Fixes: 481b5e5c ("scsi: scsi_debug: add resp_write_scat function") Signed-off-by:Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20221111100526.1790533-1-harshit.m.mogalapalli@oracle.comAcked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Don Brace authored
Reviewed-by:
Scott Benesh <scott.benesh@microchip.com> Reviewed-by:
Scott Teel <scott.teel@microchip.com> Reviewed-by:
Gerry Morong <gerry.morong@microchip.com> Reviewed-by:
Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by:
Don Brace <don.brace@microchip.com> Link: https://lore.kernel.org/r/166793533417.322537.3074216622272955440.stgit@brunhildaSigned-off-by:
-
Don Brace authored
Initialize features to 0 before processing. Reviewed-by:
Mike Mcgowan <mike.mcgowan@microchip.com> Reviewed-by:
-
Gilbert Wu authored
Add in a call to flush the controller cache during driver removal. Reviewed-by:
Gilbert Wu <Gilbert.Wu@microchip.com> Signed-off-by:
-
Kumar Meiyappan authored
Correct device count for multi-actuator drives which can cause kernel panics. Reviewed-by:
Kumar Meiyappan <Kumar.Meiyappan@microchip.com> Signed-off-by:
-
Kevin Barnett authored
Change the sysfs raid_level attribute from "RAID-0" to N/A. Reviewed-by:
-
Kevin Barnett authored
Correct maximum LUN number for multi-actuator devices. When multi-actuator support was added to smartpqi, the maximum number of LUNs supported for multi-actuator devices was supposed to be changed from unlimited to 256, but the setting was inadvertently left at unlimited. Reviewed-by:
-
Mike McGowen authored
All PCI ID entries in Hex. Add PCI IDs for ByteDance controllers: VID / DID / SVID / SDID ---- ---- ---- ---- ByteHBA JGH43024-8 9005 / 028f / 1e93 / 1000 ByteHBA JGH43034-8 9005 / 028f / 1e93 / 1001 ByteHBA JGH44014-8 9005 / 028f / 1e93 / 1002 Add PCI IDs for new Inspur controllers: VID / DID / SVID / SDID ---- ---- ---- ---- INSPUR RT0800M7E 9005 / 028f / 1bd4 / 0086 INSPUR RT0800M7H 9005 / 028f / 1bd4 / 0087 INSPUR RT0804M7R 9005 / 028f / 1bd4 / 0088 INSPUR RT0808M7R 9005 / 028f / 1bd4 / 0089 Add PCI IDs for new FAB A controllers: VID / DID / SVID / SDID ---- ---- ---- ---- Adaptec SmartRAID 3254-16e /e 9005 / 028f / 9005 / 1475 Adaptec HBA 1200-16e 9005 / 028f / 9005 / 14c3 Adaptec HBA 1200-8e 9005 / 028f / 9005 / 14c4 Add H3C controller PCI IDs: VID / DID / SVID / SDID ---- ---- ---- ---- H3C H4508-Mf-8i 9005 / 028f / 193d / 110b Reviewed-by:Mike McGowen <mike.mcgowen@microchip.com> Signed-off-by:
-
Don Brace authored
Add support for host_tagset. Also move the reserved command slots to the end of the pool to eliminate an addition operation for every SCSI request. This patch was originally authored by Hannes Reinecke here: Link: https://lore.kernel.org/linux-block/20191126131009.71726-8-hare@suse.de/ But we NAKed this patch because we wanted to fully test multipath failover operations. Suggested-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Mahesh Rajashekhara <Mahesh.Rajashekhara@microchip.com> Reviewed-by:
-
Colin Ian King authored
Pointer lp is being initialized and incremented but the result is never read. The pointer is redundant and can be removed. Once lp is removed, pcmd is not longer used. So remove pcmd as well Signed-off-by:
-
- 08 Nov, 2022 16 commits
-
-
Christophe JAILLET authored
strtobool() is the same as kstrtobool(). However, the latter is more used within the kernel. In order to remove strtobool() and slightly simplify kstrtox.h, switch to the other function name. While at it, include the corresponding header file (<linux/kstrtox.h>) Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/fcddc0a53b4fc6e3c2e93592d3f61c5c63121855.1667336095.git.christophe.jaillet@wanadoo.frReviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by:
-
Colin Ian King authored
Variable 'unit_serial_len' is just being assigned and it's never used anywhere else. Remove it. Signed-off-by:
-
Colin Ian King authored
Variable 'n' is just being incremented and it's never used anywhere else. Remove it. Signed-off-by:
-
Colin Ian King authored
Variable 'found_devs' is just being incremented and it's never used anywhere else. Remove it. Signed-off-by:
-
Bart Van Assche authored
Fix the following two compiler warnings: drivers/scsi/qla2xxx/qla_init.c: In function ‘qla24xx_async_abort_cmd’: drivers/scsi/qla2xxx/qla_init.c:171:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable] 171 | uint8_t bail; | ^~~~ drivers/scsi/qla2xxx/qla_init.c: In function ‘qla2x00_async_tm_cmd’: drivers/scsi/qla2xxx/qla_init.c:2023:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable] 2023 | uint8_t bail; | ^~~~ Cc: Arun Easi <arun.easi@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Fixes: feafb7b1 ("[SCSI] qla2xxx: Fix vport delete issues") Signed-off-by:Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20221031224818.2607882-1-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Since commit f93ed747 ("scsi: core: Release SCSI devices synchronously") it is no longer allowed to call scsi_device_put() from atomic context. Rework bfad_reset_sdev_bflags() such that scsi_device_put() is no longer called. This fixes the following smatch warning: drivers/scsi/bfa/bfad_bsg.c:2551 bfad_iocmd_lunmask_reset_lunscan_mode() warn: sleeping in atomic context bfad_iocmd_lunmask() <- disables preempt -> bfad_iocmd_lunmask_reset_lunscan_mode() -> scsi_device_put() Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Bart Van Assche authored
Before modifying bfad_reset_sdev_bflags(), convert it from a macro into a function. Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by:
-
Bart Van Assche authored
Move a scsi_device_put() call from alua_rtpg_select_sdev() to its callers. Fixes the following smatch complaint: drivers/scsi/device_handler/scsi_dh_alua.c:853 alua_rtpg_select_sdev() warn: sleeping in atomic context alua_rtpg_work() <- disables preempt -> alua_rtpg_select_sdev() -> scsi_device_put() Cc: Hannes Reinecke <hare@suse.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Reported-by:
-
Bart Van Assche authored
Fix the following smatch warning: drivers/scsi/device_handler/scsi_dh_alua.c:1013 alua_rtpg_queue() warn: sleeping in atomic context alua_check_vpd() <- disables preempt -> alua_rtpg_queue() -> scsi_device_put() Cc: Hannes Reinecke <hare@suse.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Reported-by:
-
Keoseong Park authored
Commit 68078d5c ("[SCSI] ufs: Set fDeviceInit flag to initiate device initialization") added check_upiu_size(), but no caller. Cc: Dolev Raviv <draviv@codeaurora.org> Link: https://lore.kernel.org/r/20221103055349epcms2p338f2550c2dd78d00231a83b24719a3d4@epcms2p3Signed-off-by:
Keoseong Park <keosung.park@samsung.com> Reviewed-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
-
Nathan Chancellor authored
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/scsi/elx/libefc/efc_node.c:811:22: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict] ctx->current_state = state; ^ ~~~~~ drivers/scsi/elx/libefc/efc_node.c:878:21: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict] node->nodedb_state = state; ^ ~~~~~ drivers/scsi/elx/libefc/efc_node.c:905:6: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' from 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') [-Werror,-Wincompatible-function-pointer-types-strict] pf = node->nodedb_state; ^ ~~~~~~~~~~~~~~~~~~ drivers/scsi/elx/libefc/efc_device.c:455:22: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict] node->nodedb_state = __efc_d_init; ^ ~~~~~~~~~~~~ drivers/scsi/elx/libefc/efc_sm.c:41:22: error: incompatible function pointer types assigning to 'void (*)(struct efc_sm_ctx *, u32, void *)' (aka 'void (*)(struct efc_sm_ctx *, unsigned int, void *)') from 'void (*)(struct efc_sm_ctx *, enum efc_sm_event, void *)' [-Werror,-Wincompatible-function-pointer-types-strict] ctx->current_state = state; ^ ~~~~~ The type of the second parameter in the prototypes of ->current_state() and ->nodedb_state() ('u32') does not match the implementations, which have a second parameter type of 'enum efc_sm_event'. Update the prototypes to have the correct second parameter type, clearing up all the warnings and CFI failures. Link: https://github.com/ClangBuiltLinux/linux/issues/1750Reported-by:Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20221102161906.2781508-1-nathan@kernel.orgReviewed-by:
-
Bart Van Assche authored
Move the code for aborting all SCSI commands and TMFs into a new function. This patch makes the ufshcd_err_handler() easier to read. Except for adding more logging, this patch does not change any functionality. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Colin Ian King authored
Variable 'adapter_count' is just being incremented and it's never used anywhere else. Remove it. Signed-off-by:
Khalid Aziz <khalid@gonehiking.org> Signed-off-by:
-
Colin Ian King authored
Variable 'where' is just being incremented and it's never used anywhere else. Remove it. Signed-off-by:
-
Jilin Yuan authored
Delete the redundant word 'the'. Signed-off-by:
Jilin Yuan <yuanjilin@cdjrlc.com> Link: https://lore.kernel.org/r/20221028133708.60030-1-yuanjilin@cdjrlc.comAcked-by:
Finn Thain <fthain@linux-m68k.org> Signed-off-by:
-
Keoseong Park authored
Use "if error return" style in ufshcd_hba_enable(). No functional change. Cc: Bart Van Assche <bvanassche@acm.org> Cc: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by:
-
- 27 Oct, 2022 2 commits
-
-
John Garry authored
I am soon leaving Huawei, so will no longer maintain this driver. However I will stay active in upstream Linux storage domain. Xiang Chen has worked on the driver for as long as I have and has good knowledge of the driver, so should do a good job. Signed-off-by:
John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1666784008-125519-1-git-send-email-john.garry@huawei.comSigned-off-by:
-
John Garry authored
In commit 0b639dec ("scsi: pm8001: Modify task abort handling for SATA task"), code was introduced to dereference "task" pointer in pm8001_abort_task(). However there was a pre-existing later check for "!task", which spooked the kernel test robot. Function pm8001_abort_task() should never be passed NULL for "task" pointer, so remove that check. Also remove the "unlikely" hint, as this is not fastpath code. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by:
Jack Wang <jinpu.wang@ionos.com> Signed-off-by:
-
