- 18 Jul, 2024 21 commits
-
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v6.11-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools updates from Namhyung Kim: "Build: - Build each directory as a library so that depedency check for the python extension module can be automatic - Use pkg-config to check libtraceevent and libtracefs perf sched: - Add --task-name and --fuzzy-name options for `perf sched map` It focuses on selected tasks only by removing unrelated tasks in the output. It matches the task comm with the given string and the --fuzzy-name option allows the partial matching: $ sudo perf sched record -a sleep 1 $ sudo perf sched map --task-name kworker --fuzzy-name . . . . - *A0 . . 481065.315131 secs A0 => kworker/5:2-i91:438521 . . . . - *- . . 481065.315160 secs *B0 . . . - . . . 481065.316435 secs B0 => kworker/0:0-i91:437860 *- . . . . . . . 481065.316441 secs . . . . . *A0 . . 481065.318703 secs . . . . . *- . . 481065.318717 secs . . *C0 . . . . . 481065.320544 secs C0 => kworker/u16:30-:430186 . . *- . . . . . 481065.320555 secs . . *D0 . . . . . 481065.328524 secs D0 => kworker/2:0-kdm:429654 *B0 . D0 . - . . . 481065.328527 secs *- . D0 . - . . . 481065.328535 secs . . *- . . . . . 481065.328535 secs - Fix -r/--repeat option of perf sched replay The documentation said -1 will work as infinity but it didn't accept the value. Update the code and document to use 0 instead - Fix perf sched timehist to account the delay time for preempted tasks Perf event filtering: - perf top gained filtering support on regular events using BPF like perf record. Previously it was able to use it for tracepoints only - The BPF filter now supports filtering by UID/GID. This should be preferred than -u <UID> option as it's racy to scan /proc to check tasks for the user and fails to open an event for the task if it's already gone $ sudo perf top -e cycles --filter "uid == $(id -u)" perf report: - Skip dummy events in the group output by default. The --skip-empty option controls display of empty events without samples. But perf report can force display all events in a group In this case, auto-added a dummy event (for a system-wide record) ends up in the output. Now it can skip those empty events even in the group display mode To preserve the old behavior, run this: $ perf report --group --no-skip-empty perf stat: - Choose the most disaggregate option when multiple aggregation options are given. It used to pick the last option in the command line but it can be confusing and not consistent. Now it'll choose the smallest unit For example, it'd aggregate the result per-core when the user gave both --per-socket and --per-core options at the same time Internals: - Fix `perf bench` when some CPUs are offline - Fix handling of JIT symbol mappings to accept "/tmp/perf-${PID}.map patterns only so that it can not be confused by other /tmp/perf-* files - Many improvements and fixes for `perf test` Others: - Support some new instructions for Intel-PT - Fix syscall ID mapping in perf trace - Document AMD IBS PMU usages - Change `perf lock info` to show map and thread info by default Vendor JSON events: - Update Intel events and metrics - Add i.MX9[35] DDR metrics" * tag 'perf-tools-for-v6.11-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (125 commits) perf trace: Fix iteration of syscall ids in syscalltbl->entries perf dso: Fix address sanitizer build perf mem: Warn if memory events are not supported on all CPUs perf arm-spe: Support multiple Arm SPE PMUs perf build x86: Fix SC2034 error in syscalltbl.sh perf record: Fix memset out-of-range error perf sched map: Add --fuzzy-name option for fuzzy matching in task names perf sched map: Add support for multiple task names using CSV perf sched map: Add task-name option to filter the output map perf build: Conditionally add feature check flags for libtrace{event,fs} perf install: Don't propagate subdir to Documentation submake perf vendor events arm64:: Add i.MX95 DDR Performance Monitor metrics perf vendor events arm64:: Add i.MX93 DDR Performance Monitor metrics perf dsos: When adding a dso into sorted dsos maintain the sort order perf comm str: Avoid sort during insert perf report: Calling available function for stats printing perf intel-pt: Fix exclude_guest setting perf intel-pt: Fix aux_watermark calculation for 64-bit size perf sched replay: Fix -r/--repeat command line option for infinity perf: pmus: Remove unneeded semicolon ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull tracing CREDITS file update from Steven Rostedt: "Update of MAINTAINERS and CREDITS file - Update Daniel Bristot de Oliveira's entry in MAINTAINERS with respect to his tracing code. - Add more credits to him in CREDITS file and move his entry to be alphabetical" * tag 'trace-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Update MAINTAINERS file -
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull tracing tools updates from Steven Rostedt: "Trivial updates for 6.11: - Use pretty formatting only on interactive tty in rtla/osnoise - Better reporting when histogram is empty in rtla/osnoise - Use the correct library name for "libtracefs" in feature detection" * tag 'trace-tools-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tools: build: use correct lib name for libtracefs feature detection rtla/osnoise: Better report when histogram is empty rtla/osnoise: Use pretty formatting only on interactive tty
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull ftrace updates from Steven Rostedt: "Rewrite of function graph tracer to allow multiple users Up until now, the function graph tracer could only have a single user attached to it. If another user tried to attach to the function graph tracer while one was already attached, it would fail. Allowing function graph tracer to have more than one user has been asked for since 2009, but it required a rewrite to the logic to pull it off so it never happened. Until now! There's three systems that trace the return of a function. That is kretprobes, function graph tracer, and BPF. kretprobes and function graph tracing both do it similarly. The difference is that kretprobes uses a shadow stack per callback and function graph tracer creates a shadow stack for all tasks. The function graph tracer method makes it possible to trace the return of all functions. As kretprobes now needs that feature too, allowing it to use function graph tracer was needed. BPF also wants to trace the return of many probes and its method doesn't scale either. Having it use function graph tracer would improve that. By allowing function graph tracer to have multiple users allows both kretprobes and BPF to use function graph tracer in these cases. This will allow kretprobes code to be removed in the future as it's version will no longer be needed. Note, function graph tracer is only limited to 16 simultaneous users, due to shadow stack size and allocated slots" * tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (49 commits) fgraph: Use str_plural() in test_graph_storage_single() function_graph: Add READ_ONCE() when accessing fgraph_array[] ftrace: Add missing kerneldoc parameters to unregister_ftrace_direct() function_graph: Everyone uses HAVE_FUNCTION_GRAPH_RET_ADDR_PTR, remove it function_graph: Fix up ftrace_graph_ret_addr() function_graph: Make fgraph_update_pid_func() a stub for !DYNAMIC_FTRACE function_graph: Rename BYTE_NUMBER to CHAR_NUMBER in selftests fgraph: Remove some unused functions ftrace: Hide one more entry in stack trace when ftrace_pid is enabled function_graph: Do not update pid func if CONFIG_DYNAMIC_FTRACE not enabled function_graph: Make fgraph_do_direct static key static ftrace: Fix prototypes for ftrace_startup/shutdown_subops() ftrace: Assign RCU list variable with rcu_assign_ptr() ftrace: Assign ftrace_list_end to ftrace_ops_list type cast to RCU ftrace: Declare function_trace_op in header to quiet sparse warning ftrace: Add comments to ftrace_hash_move() and friends ftrace: Convert "inc" parameter to bool in ftrace_hash_rec_update_modify() ftrace: Add comments to ftrace_hash_rec_disable/enable() ftrace: Remove "filter_hash" parameter from __ftrace_hash_rec_update() ftrace: Rename dup_hash() and comment it ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull tracing updates from Steven Rostedt: "Trivial updates for 6.11: - Set rtla/osnoise default threshold to 1us from 5us The 5us default was missing noise that people cared about. Changing it to 1us makes it work as expected. - Restructure how sched_switch prev_comm and next_comm was being saved The prev_comm was being saved along with the other next fields, and the next_comm was being saved along with the other prev fields. This is just a cosmetic change. - Have the allocation of pid_list use GFP_NOWAIT instead of GFP_KERNEL The allocation can happen in irq_work context, but luckily, the size was by default so large, it was never triggered. But in case it ever is, use the NOWAIT allocation in the interrupt context. - Fix some kernel doc errors" * tag 'trace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: trace/pid_list: Change gfp flags in pid_list_fill_irq() tracing/sched: sched_switch: place prev_comm and next_comm in right order rtla/osnoise: set the default threshold to 1us tracing: Fix trace_pid_list_free() kernel-doc -
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull bootconfig update from Masami Hiramatsu: - Remove duplicate included header file linux/bootconfig.h from lib/bootconfig.c. This is a cleanup, no behavior change. * tag 'bootconfig-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: bootconfig: Remove duplicate included header file linux/bootconfig.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull probes updates from Masami Hiramatsu: "Uprobes: - x86/shstk: Make return uprobe work with shadow stack - Add uretprobe syscall which speeds up the uretprobe 10-30% faster. This syscall is automatically used from user-space trampolines which are generated by the uretprobe. If this syscall is used by normal user program, it will cause SIGILL. Note that this is currently only implemented on x86_64. (This also has two fixes for adjusting the syscall number to avoid conflict with new *attrat syscalls.) - uprobes/perf: fix user stack traces in the presence of pending uretprobe. This corrects the uretprobe's trampoline address in the stacktrace with correct return address - selftests/x86: Add a return uprobe with shadow stack test - selftests/bpf: Add uretprobe syscall related tests. - test case for register integrity check - test case with register changing case - test case for uretprobe syscall without uprobes (expected to fail) - test case for uretprobe with shadow stack - selftests/bpf: add test validating uprobe/uretprobe stack traces - MAINTAINERS: Add uprobes entry. This does not specify the tree but to clarify who maintains and reviews the uprobes Kprobes: - tracing/kprobes: Test case cleanups. Replace redundant WARN_ON_ONCE() + pr_warn() with WARN_ONCE() and remove unnecessary code from selftest - tracing/kprobes: Add symbol counting check when module loads. This checks the uniqueness of the probed symbol on modules. The same check has already done for kernel symbols (This also has a fix for build error with CONFIG_MODULES=n) Cleanup: - Add MODULE_DESCRIPTION() macros for fprobe and kprobe examples" * tag 'probes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: MAINTAINERS: Add uprobes entry selftests/bpf: Change uretprobe syscall number in uprobe_syscall test uprobe: Change uretprobe syscall scope and number tracing/kprobes: Fix build error when find_module() is not available tracing/kprobes: Add symbol counting check when module loads selftests/bpf: add test validating uprobe/uretprobe stack traces perf,uprobes: fix user stack traces in the presence of pending uretprobes tracing/kprobe: Remove cleanup code unrelated to selftest tracing/kprobe: Integrate test warnings into WARN_ONCE selftests/bpf: Add uretprobe shadow stack test selftests/bpf: Add uretprobe syscall call from user space test selftests/bpf: Add uretprobe syscall test for regs changes selftests/bpf: Add uretprobe syscall test for regs integrity selftests/x86: Add return uprobe shadow stack test uprobe: Add uretprobe syscall to speed up return probe uprobe: Wire up uretprobe system call x86/shstk: Make return uprobe work with shadow stack samples: kprobes: add missing MODULE_DESCRIPTION() macros fprobe: add missing MODULE_DESCRIPTION() macro -
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdevLinus Torvalds authored
Pull fbdev updates from Helge Deller: - Detect VGA compatibility from VESA attributes (Thomas Zimmermann) - Make I2C terminology more inclusive in smscufx and viafb (Easwar Hariharan) - Add lots of missing MODULE_DESCRIPTION() macros (Jeff Johnson) - Logo code cleanups (Geert Uytterhoeven) - Minor fixes by Chen Ni, Kuninori Morimoto, Uwe Kleine-König and Christophe Jaillett * tag 'fbdev-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (21 commits) fbdev: viafb: Make I2C terminology more inclusive fbdev: smscufx: Make I2C terminology more inclusive fbdev: omap2: Return clk_prepare_enable to transfer the error fbdev: mmp: Constify struct mmp_overlay_ops fbdev: Drop explicit initialization of struct i2c_device_id::driver_data to 0 video: agp: add remaining missing MODULE_DESCRIPTION() macros video: console: add missing MODULE_DESCRIPTION() macros fbdev: amifb: add missing MODULE_DESCRIPTION() macro fbdev: c2p_planar: add missing MODULE_DESCRIPTION() macro fbdev: vesafb: Detect VGA compatibility from screen info's VESA attributes fbdev: omapfb: use of_graph_get_remote_port() fbdev: omapdss: use for_each_endpoint_of_node() fbdev: offb: add missing MODULE_DESCRIPTION() macro fbdev: vfb: add missing MODULE_DESCRIPTION() macro fbdev: macmodes: add missing MODULE_DESCRIPTION() macro fbdev: goldfishfb: add missing MODULE_DESCRIPTION() macro fbdev: kyro: add missing MODULE_DESCRIPTION() macro fbdev: viafb: add missing MODULE_DESCRIPTION() macro fbdev: matroxfb: add missing MODULE_DESCRIPTION() macros video/logo: Remove linux_serial_image comments ...
-
Manivannan Sadhasivam authored
Commit 50b040ef ("PCI/pwrctl: only call of_platform_populate() if CONFIG_OF is enabled") added the CONFIG_OF guard for the of_platform_populate() API. But it missed the fact that the CONFIG_OF platforms can also run on ACPI without devicetree (so dev.of_node will be NULL). In those cases, of_platform_populate() will fail with below error messages as seen on the Ampere Altra box: pci 000c:00:01.0: failed to populate child OF nodes (-22) pci 000c:00:02.0: failed to populate child OF nodes (-22) Fix this by checking for the existence of 'dev.of_node' before calling the of_platform_populate() API. This also warrants the removal of CONFIG_OF check, since dev_of_node() helper will return NULL if CONFIG_OF is not enabled. While at it, let's also use dev_of_node() to pass device OF node pointer to of_platform_populate(). Fixes: 50b040ef ("PCI/pwrctl: only call of_platform_populate() if CONFIG_OF is enabled") Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Closes: https://lore.kernel.org/linux-arm-msm/CAHk-=wjcO_9dkNf-bNda6bzykb5ZXWtAYA97p7oDsXPHmMRi6g@mail.gmail.comReviewed-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
-
Mark Rutland authored
Several versions of GCC mis-compile asm goto with outputs. We try to workaround this, but our workaround is demonstrably incomplete and liable to result in subtle bugs, especially on arm64 where get_user() has recently been moved over to using asm goto with outputs. From discussion(s) with Linus at: https://lore.kernel.org/linux-arm-kernel/Zpfv2tnlQ-gOLGac@J2N7QTR9R3.cambridge.arm.com/ https://lore.kernel.org/linux-arm-kernel/ZpfxLrJAOF2YNqCk@J2N7QTR9R3.cambridge.arm.com/ ... it sounds like the best thing to do for now is to remove the workaround and make CC_HAS_ASM_GOTO_OUTPUT depend on working compiler versions. The issue was originally reported to GCC by Sean Christopherson: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=113921 ... and Jakub Jelinek fixed this for GCC 14, with the fix backported to 13.3.0, 12.4.0, and 11.5.0. In the kernel, we tried to workaround broken compilers in commits: 4356e9f8 ("work around gcc bugs with 'asm goto' with outputs") 68fb3ca0 ("update workarounds for gcc "asm goto" issue") ... but the workaround of adding an empty asm("") after the asm volatile goto(...) demonstrably does not always avoid the problem, as can be seen in the following test case: | #define asm_goto_output(x...) \ | do { asm volatile goto(x); asm (""); } while (0) | | #define __good_or_bad(__val, __key) \ | do { \ | __label__ __failed; \ | unsigned long __tmp; \ | asm_goto_output( \ | " cbnz %[key], %l[__failed]\n" \ | " mov %[val], #0x900d\n" \ | : [val] "=r" (__tmp) \ | : [key] "r" (__key) \ | : \ | : __failed); \ | (__val) = __tmp; \ | break; \ | __failed: \ | (__val) = 0xbad; \ | } while (0) | | unsigned long get_val(unsigned long key); | unsigned long get_val(unsigned long key) | { | unsigned long val = 0xbad; | | __good_or_bad(val, key); | | return val; | } GCC 13.2.0 (at -O2) compiles this to: | cbnz x0, .Lfailed | mov x0, #0x900d | .Lfailed: | ret GCC 14.1.0 (at -O2) compiles this to: | cbnz x0, .Lfailed | mov x0, #0x900d | ret | .Lfailed: | mov x0, #0xbad | ret Note that GCC 13.2.0 erroneously omits the assignment to 'val' in the error path (even though this does not depend on an output of the asm goto). GCC 14.1.0 correctly retains the assignment. This problem can be seen within the kernel with the following test case: | #include <linux/uaccess.h> | #include <linux/types.h> | | noinline unsigned long test_unsafe_get_user(unsigned long __user *ptr); | noinline unsigned long test_unsafe_get_user(unsigned long __user *ptr) | { | unsigned long val; | | unsafe_get_user(val, ptr, Efault); | return val; | | Efault: | val = 0x900d; | return val; | } GCC 13.2.0 (arm64 defconfig) compiles this to: | and x0, x0, #0xff7fffffffffffff | ldtr x0, [x0] | .Lextable_fixup: | ret GCC 13.2.0 (x86_64 defconfig + MITIGATION_RETPOLINE=n) compiles this to: | endbr64 | mov (%rdi),%rax | .Lextable_fixup: | ret ... omitting the assignment to 'val' in the error path, and leaving garbage in the result register returned by the function (which happens to contain the faulting address in the generated code). GCC 14.1.0 (arm64 defconfig) compiles this to: | and x0, x0, #0xff7fffffffffffff | ldtr x0, [x0] | ret | .Lextable_fixup: | mov x0, #0x900d // #36877 | ret GCC 14.1.0 (x86_64 defconfig + MITIGATION_RETPOLINE=n) compiles this to: | endbr64 | mov (%rdi),%rax | ret | .Lextable_fixup: | mov $0x900d,%eax | ret ... retaining the expected assignment to 'val' in the error path. We don't have a complete and reasonable workaround. While placing empty asm("") blocks after each goto label *might* be sufficient, we don't know for certain, this is tedious and error-prone, and there doesn't seem to be a neat way to wrap this up (which is especially painful for cases with multiple goto labels). Avoid this issue by disabling CONFIG_CC_HAS_ASM_GOTO_OUTPUT for known-broken compiler versions and removing the workaround (along with the CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND config option). For the moment I've left the default implementation of asm_goto_output() unchanged. This should now be redundant since any compiler with the fix for the clobbering issue whould also have a fix for the (earlier) volatile issue, but it's far less churny to leave it around, which makes it easier to backport this patch if necessary. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Alex Coplan <alex.coplan@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jakub Jelinek <jakub@gcc.gnu.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Szabolcs Nagy <szabolcs.nagy@arm.com> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Masahiro Yamada authored
Commit fbb5c060 ("kbuild: add syscall table generation to scripts/Makefile.asm-headers") started to generate syscall headers for architectures using generic syscalls. However, these headers are always rebuilt using GNU Make 4.4.1 or newer. When using GNU Make 4.4 or older, these headers are not rebuilt when the command to generate them is changed, despite the use of the if_changed macro. scripts/Makefile.asm-headers now uses FORCE, but it is not marked as .PHONY. To handle the command line change correctly, .*.cmd files must be included. Fixes: fbb5c060 ("kbuild: add syscall table generation to scripts/Makefile.asm-headers") Reported-by:
Masahiro Yamada <masahiroy@kernel.org> Tested-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
https://gitlab.freedesktop.org/drm/kernelLinus Torvalds authored
Pull drm updates from Dave Airlie: "There's a lot of stuff in here, amd, i915 and xe have new platform work, lots of core rework around EDID handling, some new COMPILE_TEST options, maintainer changes and a lots of other stuff. Summary: core: - deprecate DRM data and return 0 date - connector: Create a set of helpers to help with HDMI support - Remove driver owner assignments - Allow more drivers to compile with COMPILE_TEST - Conversions to drm_edid - Sprinkle MODULE_DESCRIPTIONS everywhere they are missing - Remove drm_mm_replace_node - print: Add a drm prefix to warn level messages too, remove ___drm_dbg, consolidate prefix handling - New monochrome TV mode variant ttm: - improve number of page faults on some platforms - fix test builds under PREEMPT_RT - more test coverage ci: - Require a more recent version of mesa - improve farm setup and test generation dma-buf: - warn if reserving 0 fence slots - internal API heap enhancements fbdev: - Create memory manager optimized fbdev emulation panic: - Allow to select fonts - improve drm_fb_dma_get_scanout_buffer - Allow to dump kmsg to the screen bridge: - Remove redundant checks on bridge->encoder - Remove drm_bridge_chain_mode_fixup - bridge-connector: Plumb in the new HDMI helper - analogix_dp: Various improvements, handle AUX transfers timeout - samsung-dsim: Fix timings calculation - tc358767: Plenty of small fixes, fix no connector attach, fix clocks - sii902x: state validation improvements panels: - Switch panels from register table initialization to proper code - Now that the panel code tracks the panel state, remove every ad-hoc implementation in the panel drivers - More cleanup of prepare / enable state tracking in drivers - edp: Drop legacy panel compatibles - simple-bridge: Switch to devm_drm_bridge_add - New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology 13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView PM070WL4, Lincoln Technologies LCD197, Ortustech COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti amdgpu: - DCN 4.0.x support - GC 12.0 support - GMC 12.0 support - SDMA 7.0 support - MES12 support - MMHUB 4.1 support - GFX12 modifier and DCC support - lots of IP fixes/updates amdkfd: - Contiguous VRAM allocations - GC 12.0 support - SDMA 7.0 support - SR-IOV fixes - KFD GFX ALU exceptions i915: - Battlemage Xe2 HPD display enablement - Panel Replay enabling - DP AUX-less ALPM/LOBF - Enable link training failure fallback for DP MST links - CMRR (Content Match Refresh Rate) enabling - Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps - Enable eDP AUX based HDR backlight - Support replaying GPU hangs with captured context image - Automate CCS Mode setting during engine resets - lots of refactoring - Support replaying GPU hangs with captured context image - Increase FLR timeout from 3s to 9s - Enable w/a 16021333562 for DG2, MTL and ARL [guc] xe: - update MAINATINERS - New uapi adding OA functionality to Xe - expose l3 bank mask - fix display detect on ADL-N - runtime PM Fixes - Fix silent backmerge issues - More prep for SR-IOV - HWmon additions - per client usage info - Rework GPU page fault handling - Drop EXEC_QUEUE_FLAG_BANNED - Add BMG PCI IDs - Scheduler fixes and improvements - Rename xe_exec_queue::compute to xe_exec_queue::lr - Use ttm_uncached for BO with NEEDS_UC flag - Rename xe perf layer as xe observation layer - lots of refactoring radeon: - Backlight workaround for iMac - Silence UBSAN flex array warnings msm: - Validate registers XML description against schema in CI - core/dpu: SM7150 support - mdp5: Add support for MSM8937 - gpu: Add param for userspace to know if raytracing is supported - gpu: X185 support (aka gpu in X1 laptop chips) - gpu: a505 support ivpu: - hardware scheduler support - profiling support - improvements to the platform support layer - firmware handling improvements - clocks/power mgmt improvements - scheduler/logging improvements habanalabs: - Gradual sleep in polling memory macro - Reduce Gaudi2 MSI-X interrupt count to 128 - Add Gaudi2-D revision support - Add timestamp to CPLD info - Gaudi2: Assume hard-reset by firmware upon MC SEI severe error - Align Gaudi2 interrupt names - Check for errors after preboot is ready - Change habanalabs maintainer and git repo path mgag200: - refactoring and improvements - Add BMC output - enable polling nouveau: - add registry command line v3d: - perf counters improvements zynqmp: - irq and debugfs improvements atmel-hlcdc: - Support XLCDC in sam9x7 mipi-dbi: - Remove mipi_dbi_machine_little_endian - make SPI bits per word configurable - support RGB888 - allow pixel formats to be specified in the DT sun4i: - Rework the blender setup for DE2 panfrost: - Enable MT8188 support vc4: - Monochrome TV support exynos: - fix fallback mode regression - fix memory leak - Use drm_edid_duplicate() instead of kmemdup() etnaviv: - fix i.MX8MP NPU clock gating - workaround FE register cdc issues on some cores - fix DMA sync handling for cached buffers - fix job timeout handling - keep TS enabled on MMUv2 cores for improved performance mediatek: - Convert to platform remove callback returning void- - Drop chain_mode_fixup call in mode_valid() - Fixes the errors of MediaTek display driver found by IGT - Add display support for the MT8365-EVK board - Fix bit depth overwritten for mtk_ovl_set bit_depth() - Fix possible_crtcs calculation - Fix spurious kfree() ast: - refactor mode setting code stm: - Add LVDS support - DSI PHY updates" * tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits) drm/amdgpu/mes12: add missing opcode string drm/amdgpu/mes11: update opcode strings Revert "drm/amd/display: Reset freesync config before update new state" drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB drm/xe: Drop trace_xe_hw_fence_free drm/xe/uapi: Rename xe perf layer as xe observation layer drm/amdgpu: remove exp hw support check for gfx12 drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed drm/amdgpu: flush all cached ras bad pages to eeprom drm/amdgpu: select compute ME engines dynamically drm/amd/display: Allow display DCC for DCN401 drm/amdgpu: select compute ME engines dynamically drm/amdgpu/job: Replace DRM_INFO/ERROR logging drm/amdgpu: select compute ME engines dynamically drm/amd/pm: Ignore initial value in smu response register drm/amdgpu: Initialize VF partition mode drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping MAINTAINERS: fix Xinhui's name MAINTAINERS: update powerplay and swsmu drm/qxl: Pin buffer objects for internal mappings ... -
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media updates from Mauro Carvalho Chehab: - New sensor drivers: gc05a2, gc08a3 and imx283 - New serializer/deserializer drivers: max96714 and max96717 - New JPEG encoder driver: e5010 - Support for Raspberry Pi PiSP Backend (BE) ISP driver - Old documentation for av7110 driver removed, as a new version was added as Documentation/userspace-api/media/dvb/legacy*.rst - atompisp: Linux firmwares are now available, so drop firmware-related task from TODO and update firmware logic - The imx258 driver has gained several improvements - wave5 driver has gained support for HEVC decoding - em28xx gained support for MyGica UTV3 - av7110 budget-patch driver removed - Lots of other cleanups, improvements and fixes * tag 'media/v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (301 commits) media: raspberrypi: Switch to remove_new media: uapi: pisp_be_config: Add extra config fields media: uapi: pisp_be_config: Re-sort pisp_be_tiles_config media: uapi: pisp_common: Capitalize all macros media: uapi: pisp_common: Add 32 bpp format test media: uapi: pisp_be_config: Drop BIT() from uAPI media: stm32: dcmipp: correct error handling in dcmipp_create_subdevs media: atomisp: Fix spelling mistakes in sh_css_sp.c media: atomisp: Fix spelling mistake in ia_css_debug.c media: atomisp: Fix spelling mistake in hmm_bo.c media: atomisp: Fix spelling mistake in ia_css_eed1_8.host.c media: atomisp: Fix spelling mistake in sh_css_internal.h media: atomisp: Fix spelling mistake "pipline" -> "pipeline" media: atomisp: Remove unused GPIO related defines and APIs media: atomisp: Replace COMPILATION_ERROR_IF() by static_assert() media: atomisp: Clean up unused macros from math_support.h media: atomisp: csi2-bridge: Add DMI quirk for OV5693 on Xiaomi Mipad2 media: atomisp: Update TODO media: atomisp: Prefix firmware paths with "intel/ipu/" media: atomisp: Remove firmware_name module parameter ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree updates from Rob Herring: "DT Bindings: - Convert and add a bunch of IBM FSI related bindings - Add a new schema listing legacy compatibles which will (probably) never be documented. This will silence various checks warning about them. - Add bindings for Sierra Wireless mangOH Green SPI IoT interface, new Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75 GPI DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and CSI-2 blocks - Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema - Drop obsolete stericsson,abx500.txt DT core: - Update dtc to upstream version v1.7.0-93-g1df7b047fe43 - Add support to run DT validation on DTs with applied overlays - Add helper for creating boolean properties in dynamic nodes and use that for dynamic PCI nodes - Clean-up early parsing of '#{address,size}-cells'" * tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits) dt-bindings: timer: sprd-timer: convert to YAML dt-bindings: incomplete-devices: document devices without bindings dt-bindings: trivial-devices: document the Sierra Wireless mangOH Green SPI IoT interface scripts/dtc: Update to upstream version v1.7.0-93-g1df7b047fe43 dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node dt-bindings: soc: fsl: cpm_qe: convert to yaml format dt-bindings: i2c: i2c-fsi: Convert to json-schema dt-bindings: fsi: Document the FSI Hub Controller dt-bindings: fsi: Document the AST2700 FSI controller dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller dt-bindings: fsi: Document the FSI controller common properties dt-bindings: fsi: Document the IBM SBEFIFO engine dt-bindings: fsi: p9-occ: Convert to json-schema dt-bindings: fsi: Document the IBM SCOM engine dt-bindings: fsi: fsi2spi: Document SPI controller child nodes dt-bindings: interrupt-controller: convert fsl,ls-scfg-msi to yaml dt-bindings: soc: fsl: Convert q(b)man-* to yaml format dt-bindings: misc: fsl,qoriq-mc: convert to yaml format dt-bindings: drop stale Anson Huang from maintainers ... -
git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linuxLinus Torvalds authored
Pull hardware timestamp update from Dipen Patel: - Add module description in hte test to silence modpost warnings * tag 'for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pateldipen1984/linux: hte: tegra-194: add missing MODULE_DESCRIPTION() macro
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/ledsLinus Torvalds authored
Pull LED updates from Lee Jones: "Core Frameworks: - New trigger for Input Events - New led_mc_set_brightness() call to adapt colour/brightness for mutli-colour LEDs - New lled_mc_trigger_event() call to call the above based on given trigger conditions - New led_get_color_name() call, a wrapper around the existing led_colors[] array - A new flag to avoid automatic renaming of LED devices New Drivers: - Silergy SY7802 Flash LED Controller - Texas Instruments LP5569 LED Controller - ChromeOS EC LED Controller New Device Support: - KTD202{6,7} support for Kinetic KTD2026/7 LEDs Fix-ups: - Replace ACPI/DT firmware helpers with agnostic variants - Make use of resource managed devm_* API calls - Device Tree binding adaptions/conversions/creation - Constify/staticise applicable data structures - Trivial; spelling, whitespace, coding-style adaptions - Drop i2c_device_id::driver_data where the value is unused - Utilise centrally provided helpers and macros to aid simplicity and avoid duplication - Use generic platform device properties instead of OF/ACPI specific ones - Consolidate/de-duplicate various functionality - Remove superfluous/duplicated/unused sections - Make use of the new *_scoped() guard APIs - Improve/simplify error handling Bug Fixes: - Flush pending brightness changes before activating the trigger - Repair incorrect device naming preventing matches - Prevent memory leaks by correctly free resources during error handling routines - Repair locking issue causing circular dependency splats and lock-ups - Unregister sysfs entries before deactivating triggers to prevent use-after issues - Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings - Use correct return codes expected by the callers - Omit set_brightness() error message for a LEDs that support only HW triggers" * tag 'leds-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (65 commits) leds: leds-lp5569: Enable chip after chip configuration leds: leds-lp5569: Better handle enabling clock internal setting leds: leds-lp5569: Fix typo in driver name leds: flash: leds-qcom-flash: Test the correct variable in init leds: leds-lp55xx: Convert mutex lock/unlock to guard API leds: leds-lp5523: Convert to sysfs_emit API leds: leds-lp5569: Convert to sysfs_emit API Revert "leds: led-core: Fix refcount leak in of_led_get()" leds: leds-lp5569: Add support for Texas Instruments LP5569 leds: leds-lp55xx: Drop deprecated defines leds: leds-lp55xx: Support ENGINE program up to 128 bytes leds: leds-lp55xx: Generalize sysfs master_fader leds: leds-lp55xx: Generalize sysfs engine_leds leds: leds-lp55xx: Generalize sysfs engine_load and engine_mode leds: leds-lp55xx: Generalize stop_engine function leds: leds-lp55xx: Generalize turn_off_channels function leds: leds-lp55xx: Generalize set_led_current function leds: leds-lp55xx: Generalize multicolor_brightness function leds: leds-lp55xx: Generalize led_brightness function leds: leds-lp55xx: Generalize firmware_loaded function ... -
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlightLinus Torvalds authored
Pull backlight updates from Lee Jones: "New Drivers: - Texas Instruments LM3509 Backlight Driver Fix-ups: - Device Tree binding adaptions/conversions/creation - Drop i2c_device_id::driver_data where the value is unused - Make use of the new *_scoped() guard APIs - Decouple from fbdev by providing Backlight with its own BACKLIGHT_POWER_* constrains Bug Fixes: - Correctly assess return values (NULL vs IS_ERR()) - Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings" * tag 'backlight-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (23 commits) backlight: sky81452-backlight: Use backlight power constants backlight: rave-sp-backlight: Use backlight power constants backlight: pwm-backlight: Use backlight power constants backlight: pcf50633-backlight: Use backlight power constants backlight: pandora-backlight: Use backlight power constants backlight: mp3309c: Use backlight power constants backlight: lm3533-backlight: Use backlight power constants backlight: led-backlight: Use backlight power constants backlight: ktd253-backlight: Use backlight power constants backlight: kb3886-bl: Use backlight power constants backlight: journada_bl: Use backlight power constants backlight: ipaq-micro-backlight: Use backlight power constants backlight: gpio-backlight: Use backlight power constants backlight: corgi-lcd: Use backlight power constants backlight: ams369fb06: Use backlight power constants backlight: aat2870-backlight: Use blacklight power constants backlight: Add BACKLIGHT_POWER_ constants for power states backlight: lm3509_bl: Fix early returns in for_each_child_of_node() backlight: Drop explicit initialization of struct i2c_device_id::driver_data to 0 backlight: Add missing MODULE_DESCRIPTION() macros ... -
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD updates from Lee Jones: "New Drivers: - ROHM BD96801 Power Management IC - Cirrus Logic CS40L50 Haptic Driver with Waveform Memory - Marvell 88PM886 Power Management IC New Device Support: - Keyboard Backlight to ChromeOS Embedded Controller - LEDs to ChromeOS Embedded Controller - Charge Control to ChromeOS Embedded Controller - HW Monitoring Service to ChromeOS Embedded Controller - AUXADCs to MediaTek MT635{7,8,9} Power Management ICs New Functionality: - Allow Syscon consumers to supply their own Regmaps on registration Fix-ups: - Constify/staticise applicable data structures - Remove superfluous/duplicated/unused sections - Device Tree binding adaptions/conversions/creation - Trivial; spelling, whitespace, coding-style adaptions - Utilise centrally provided helpers and macros to aid simplicity/duplication - Drop i2c_device_id::driver_data where the value is unused - Replace ACPI/DT firmware helpers with agnostic variants - Move over to GPIOD (descriptor-based) APIs - Annotate a bunch of __counted_by() cases - Straighten out some includes Bug Fixes: - Ensure potentially asserted recent lines are deasserted during initialisation - Avoid "<module>.ko is added to multiple modules" warnings - Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings - Fix Wvoid-pointer-to-enum-cast warnings" * tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits) mfd: timberdale: Attach device properties to TSC2007 board info mfd: tmio: Move header to platform_data mfd: tmio: Sanitize comments mfd: tmio: Update include files mmc: tmio/sdhi: Fix includes mfd: tmio: Remove obsolete io accessors mfd: tmio: Remove obsolete platform_data watchdog: bd96801_wdt: Add missing include for FIELD_*() dt-bindings: mfd: syscon: Add APM poweroff mailbox dt-bindings: mfd: syscon: Split and enforce documenting MFD children dt-bindings: mfd: rk817: Merge support for RK809 dt-bindings: mfd: rk817: Fixup clocks and reference dai-common dt-bindings: mfd: syscon: Add TI's opp table compatible mfd: omap-usb-tll: Use struct_size to allocate tll dt-bindings: mfd: Explain lack of child dependency in simple-mfd dt-bindings: mfd: Dual licensing for st,stpmic1 bindings mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode() mfd: lm3533: Move to new GPIO descriptor-based APIs mfd: tps65912: Use devm helper functions to simplify probe ... -
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID updates from Benjamin Tissoires: - rewrite of the HID-BPF internal implementation to use bpf struct_ops instead of a tracing endpoint (Benjamin Tissoires) - add two new HID-BPF hooks to be able to intercept userspace calls targeting a HID device and filtering them (Benjamin Tissoires) - add support for various new devices through HID-BPF filters (Benjamin Tissoires) - add support for the magic keyboard backlight (Orlando Chamberlain) - add the missing MODULE_DESCRIPTION() macros in HID drivers (Jeff Johnson) - use of kvzalloc in case memory gets too fragmented (Hailong Liu) - retrieve the device firmware node in the child HID device (Danny Kaehn) - some hid-uclogic improvements (José Expósito) - some more typos, trivial fixes, kernel doctext and unused functions cleanups * tag 'for-linus-2024071601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (60 commits) HID: hid-steam: Fix typo in goto label HID: mcp2221: Remove unnecessary semicolon HID: Fix spelling mistakes "Kensigton" -> "Kensington" HID: add more missing MODULE_DESCRIPTION() macros HID: samples: fix the 2 struct_ops definitions HID: fix for amples in for-6.11/bpf HID: apple: Add support for magic keyboard backlight on T2 Macs HID: bpf: Thrustmaster TCA Yoke Boeing joystick fix HID: bpf: Add Huion Dial 2 bpf fixup HID: bpf: Add support for the XP-PEN Deco Mini 4 HID: bpf: move the BIT() macro to hid_bpf_helpers.h HID: bpf: add a driver for the Huion Inspiroy 2S (H641P) HID: bpf: Add a HID report composition helper macros HID: bpf: doc fixes for hid_hw_request() hooks HID: bpf: doc fixes for hid_hw_request() hooks HID: bpf: fix gcc warning and unify __u64 into u64 selftests/hid: ensure CKI can compile our new tests on old kernels selftests/hid: add an infinite loop test for hid_bpf_try_input_report selftests/hid: add another test for injecting an event from an event hook HID: bpf: allow hid_device_event hooks to inject input reports on self ...
-
https://github.com/cminyard/linux-ipmiLinus Torvalds authored
Pull IPMI updates from Corey Minyard: "Some cleanups for device changes coming, and some range checks on data coming from a host to a BMC" * tag 'for-linus-6.11-1' of https://github.com/cminyard/linux-ipmi: ipmi: Drop explicit initialization of struct i2c_device_id::driver_data to 0 ipmi: ssif_bmc: prevent integer overflow on 32bit systems
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Ilpo Järvinen: - amd/pmf: Report system state changes using existing input events - asus-wmi: Zenbook 2023 camera LED disable support and fix TUF laptop keyboard RGB LED sysfs interface - dell-pc: Fan modes / platform profile support - hp-wmi: Fix platform profile switching on Omen/Victus laptops - intel/ISST: Use only TPMI interface when TPMI and legacy interfaces are available - intel/pmc: LTR restore support to pair with LTR ignore - intel/tpmi: Performance Limit Reasons (PLR) and APIC <-> Punit CPU numbering mapping support - WMI: driver override support and docs improvements - lenovo-yoga-c630: Support for EC (platform/arm64) - platform/arm64: Fix build with COMPILE_TEST (broke after addition of C630) - tools: Intel Speed Select Turbo Ratio Limit fix - Miscellaneous cleanups / refactoring / improvements * tag 'platform-drivers-x86-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits) platform/x86: asus-wmi: fix TUF laptop RGB variant platform/x86/intel/tpmi/plr: Fix output in plr_print_bits() Docs/admin-guide: Remove pmf leftover reference from the index platform/x86: ideapad-laptop: use cleanup.h platform/x86: hp-wmi: Fix implementation of the platform_profile_omen_get function platform: arm64: EC_LENOVO_YOGA_C630 should depend on ARCH_QCOM platform: arm64: EC_ACER_ASPIRE1 should depend on ARCH_QCOM platform/x86/amd/pmf: Remove update system state document platform/x86/amd/pmf: Use existing input event codes to update system states platform/x86: hp-wmi: Fix platform profile option switch bug on Omen and Victus laptops platform/x86:intel/pmc: Add support to undo ltr_ignore platform/x86:intel/pmc: Use the Elvis operator platform/x86:intel/pmc: Use DEFINE_SHOW_STORE_ATTRIBUTE macro platform/x86:intel/pmc: Remove unneeded min_t check platform/x86:intel/pmc: Add support to show ltr_ignore value platform/x86:intel/pmc: Move pmc assignment closer to first usage platform/x86:intel/pmc: Convert index variables to be unsigned platform/x86:intel/pmc: Simplify mutex usage with cleanup helpers platform/x86:intel/pmc: Use the return value of pmc_core_send_msg tools/power/x86/intel-speed-select: v1.20 release ...
-
- 17 Jul, 2024 19 commits
-
-
Dave Airlie authored
Merge tag 'amd-drm-next-6.11-2024-07-12' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.11-2024-07-12: amdgpu: - RAS fixes - SMU fixes - GC 12 updates - SR-IOV fixes - IH 7 updates - DCC fixes - GC 11.5 fixes - DP MST fixes - GFX 9.4.4 fixes - SMU 14 updates - Documentation updates - MAINTAINERS updates - PSR SU fix - Misc small fixes Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240712171637.2581787-1-alexander.deucher@amd.com
-
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linuxLinus Torvalds authored
Pull ata updates from Niklas Cassel: - ATA PASS-THROUGH sense data cleanups and fixes (Igor Pylypiv) Store the sense data for ATA PASS-THROUGH commands at the correct offset in the sense buffer when using fixed format sense data. Cleanup the logic related to generating sense data for PASS-THROUGH commands. Generating sense data for PASS-THROUGH commands would overwrite any eventual (real) sense data received from the device. Honor the D_SENSE bit when generating sense data for PASS-THROUGH commands. (The D_SENSE bit can be set by the user, and determines if the returned sense data should be in fixed format or descriptor format) - ata port allocation cleanups (me) Assign the ata port print_id at port allocation time, such that the ata_port_* print functions can be used earlier in the init call chain. Change the ata port port print_id to use ida_alloc(), such that print_ids will get reused on rmmod + modprobe, instead of being incremented indefinitely. Remove wrappers that only existed in order to export the internal libata functions which they wrapped, and instead export the libata functions directly. - Update SATA_MOBILE_LPM_POLICY Kconfig default to med_power_with_dipm (Mario Limonciello) Using this default was not always a good idea before, because it would break hot plug support. However, with LPM changes in recent kernels, a port marked as external will not enable LPM (in order to not break hot plug), so it is now safe to change the default value of this Kconfig. All major Linux distros have had SATA_MOBILE_LPM_POLICY set to med_power_with_dipm for quite a long time - Convert ahci-fsl-qoriq device tree binding to yaml format (Frank Li) * tag 'ata-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: dt-bindings: ata: ahci-fsl-qoriq: add fsl,ls1046a-ahci and fsl,ls1012a-ahci ata: ahci: Add debug print for external port ata,scsi: Remove wrapper ata_sas_port_alloc() ata: libata-core: Reuse available ata_port print_ids ata: libata: Assign print_id at port allocation time ata: libata-core: Remove local_port_no struct member ata: libata-sata: Remove superfluous assignment in ata_sas_port_alloc() ata: libata-core: Remove support for decreasing the number of ports ata: libata: Remove unused function declaration for ata_scsi_detect() ata,scsi: Remove wrappers ata_sas_tport_{add,delete}() ata: libata-scsi: Check ATA_QCFLAG_RTF_FILLED before using result_tf ata: libata-core: Set ATA_QCFLAG_RTF_FILLED in fill_result_tf() ata: libata-scsi: Do not pass ATA device id to ata_to_sense_error() ata: libata-scsi: Remove redundant sense_buffer memsets ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error ata: libata-scsi: Do not overwrite valid sense data when CK_COND=1 ata: libata-scsi: Fix offsets for the fixed format sense data dt-bindings: ata: ahci-fsl-qoriq: convert to yaml format ata: Kconfig: Update SATA_MOBILE_LPM_POLICY default to med_power_with_dipm
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefsLinus Torvalds authored
Pull zonefs update from Damien Le Moal: "A single change to enable support for large folios (from Johannes)" * tag 'zonefs-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: enable support for large folios
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull udf, ext2, isofs fixes and cleanups from Jan Kara: - A few UDF cleanups and fixes for handling corrupted filesystems - ext2 fix for handling of corrupted filesystem - isofs module description - jbd2 module description * tag 'fs_for_v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ext2: Verify bitmap and itable block numbers before using them udf: prevent integer overflow in udf_bitmap_free_blocks() udf: Avoid excessive partition lengths udf: Drop load_block_bitmap() wrapper udf: Avoid using corrupted block bitmap buffer udf: Fix bogus checksum computation in udf_rename() udf: Fix lock ordering in udf_evict_inode() udf: Drop pointless IS_IMMUTABLE and IS_APPEND check isofs: add missing MODULE_DESCRIPTION() jbd2: add missing MODULE_DESCRIPTION()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull fsnotify fix from Jan Kara: "Fix possible softlockups on directories with many dentries in fsnotify code" * tag 'fsnotify_for_v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fsnotify: clear PARENT_WATCHED flags lazily
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs updates from Chandan Babu: "Major changes in this release are limited to enabling FITRIM on realtime devices and Byte-based grant head log reservation tracking. The remaining changes are limited to fixes and cleanups included in this pull request. Core: - Enable FITRIM on the realtime device - Introduce byte-based grant head log reservation tracking instead of physical log location tracking. This allows grant head to track a full 64 bit bytes space and hence overcome the limit of 4GB indexing that has been present until now Fixes: - xfs_flush_unmap_range() and xfs_prepare_shift() should consider RT extents in the flush unmap range - Implement bounds check when traversing log operations during log replay - Prevent out of bounds access when traversing a directory data block - Prevent incorrect ENOSPC when concurrently performing file creation and file writes - Fix rtalloc rotoring when delalloc is in use Cleanups: - Clean up I/O path inode locking helpers and the page fault handler - xfs: hoist inode operations to libxfs in anticipation of the metadata inode directory feature, which maintains a directory tree of metadata inodes. This will be necessary for further enhancements to the realtime feature, subvolume support - Clean up some warts in the extent freeing log intent code - Clean up the refcount and rmap intent code before adding support for realtime devices - Provide the correct email address for sysfs ABI documentation" * tag 'xfs-6.11-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (80 commits) xfs: fix rtalloc rotoring when delalloc is in use xfs: get rid of xfs_ag_resv_rmapbt_alloc xfs: skip flushing log items during push xfs: grant heads track byte counts, not LSNs xfs: pass the full grant head to accounting functions xfs: track log space pinned by the AIL xfs: collapse xlog_state_set_callback in caller xfs: l_last_sync_lsn is really AIL state xfs: ensure log tail is always up to date xfs: background AIL push should target physical space xfs: AIL doesn't need manual pushing xfs: move and rename xfs_trans_committed_bulk xfs: fix the contact address for the sysfs ABI documentation xfs: Avoid races with cnt_btree lastrec updates xfs: move xfs_refcount_update_defer_add to xfs_refcount_item.c xfs: simplify usage of the rcur local variable in xfs_refcount_finish_one xfs: don't bother calling xfs_refcount_finish_one_cleanup in xfs_refcount_finish_one xfs: reuse xfs_refcount_update_cancel_item xfs: add a ci_entry helper xfs: remove xfs_trans_set_refcount_flags ... -
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfatLinus Torvalds authored
Pull exfat updates from Namjae Jeon: - Fix deadlock issue reported by syzbot - Handle idmapped mounts * tag 'exfat-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: fix potential deadlock on __exfat_get_dentry_set exfat: handle idmapped mounts
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs updates from David Sterba: "The highlights are new logic behind background block group reclaim, automatic removal of qgroup after removing a subvolume and new 'rescue=' mount options. The rest is optimizations, cleanups and refactoring. User visible features: - dynamic block group reclaim: - tunable framework to avoid situations where eager data allocations prevent creating new metadata chunks due to lack of unallocated space - reuse sysfs knob bg_reclaim_threshold (otherwise used only in zoned mode) for a fixed value threshold - new on/off sysfs knob "dynamic_reclaim" calculating the value based on heuristics, aiming to keep spare working space for relocating chunks but not to needlessly relocate partially utilized block groups or reclaim newly allocated ones - stats are exported in sysfs per block group type, files "reclaim_*" - this may increase IO load at unexpected times but the corner case of no allocatable block groups is known to be worse - automatically remove qgroup of deleted subvolumes: - adjust qgroup removal conditions, make sure all related subvolume data are already removed, or return EBUSY, also take into account setting of sysfs drop_subtree_threshold - also works in squota mode - mount option updates: new modes of 'rescue=' that allow to mount images (read-only) that could have been partially converted by user space tools - ignoremetacsums - invalid metadata checksums are ignored - ignoresuperflags - super block flags that track conversion in progress (like UUID or checksums) Core: - size of struct btrfs_inode is now below 1024 (on a release config), improved memory packing and other secondary effects - switch tracking of open inodes from rb-tree to xarray, minor performance improvement - reduce number of empty transaction commits when there are no dirty data/metadata - memory allocation optimizations (reduced numbers, reordering out of critical sections) - extent map structure optimizations and refactoring, more sanity checks - more subpage in zoned mode preparations or fixes - general snapshot code cleanups, improvements and documentation - tree-checker updates: more file extent ram_bytes fixes, continued - raid-stripe-tree update (not backward compatible): - remove extent encoding field from the structure, can be inferred from other information - requires btrfs-progs 6.9.1 or newer - cleanups and refactoring - error message updates - error handling improvements - return type and parameter cleanups and improvements" * tag 'for-6.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (152 commits) btrfs: fix extent map use-after-free when adding pages to compressed bio btrfs: fix bitmap leak when loading free space cache on duplicate entry btrfs: remove the BUG_ON() inside extent_range_clear_dirty_for_io() btrfs: move extent_range_clear_dirty_for_io() into inode.c btrfs: enhance compression error messages btrfs: fix data race when accessing the last_trans field of a root btrfs: rename the extra_gfp parameter of btrfs_alloc_page_array() btrfs: remove the extra_gfp parameter from btrfs_alloc_folio_array() btrfs: introduce new "rescue=ignoresuperflags" mount option btrfs: introduce new "rescue=ignoremetacsums" mount option btrfs: output the unrecognized super block flags as hex btrfs: remove unused Opt enums btrfs: tree-checker: add extra ram_bytes and disk_num_bytes check btrfs: fix the ram_bytes assignment for truncated ordered extents btrfs: make validate_extent_map() catch ram_bytes mismatch btrfs: ignore incorrect btrfs_file_extent_item::ram_bytes btrfs: cleanup the bytenr usage inside btrfs_extent_item_to_extent_map() btrfs: fix typo in error message in btrfs_validate_super() btrfs: move the direct IO code into its own file btrfs: pass a btrfs_inode to btrfs_set_prop() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 updates from Andreas Gruenbacher: "Fixes and cleanups: - Revise the glock reference counting model and LRU list handling to be more sensible - Several quota related fixes: clean up the quota code, add some missing locking, and work around the on-disk corruption that the reverted patch "gfs2: ignore negated quota changes" causes - Clean up the glock demote logic in glock_work_func()" * tag 'gfs2-v6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (29 commits) gfs2: Clean up glock demote logic gfs2: Revert "check for no eligible quota changes" gfs2: Be more careful with the quota sync generation gfs2: Get rid of some unnecessary quota locking gfs2: Add some missing quota locking gfs2: Fold qd_fish into gfs2_quota_sync gfs2: quota need_sync cleanup gfs2: Fix and clean up function do_qc gfs2: Revert "Add quota_change type" gfs2: Revert "ignore negated quota changes" gfs2: qd_check_sync cleanups gfs2: Revert "introduce qd_bh_get_or_undo" gfs2: Check quota consistency on mount gfs2: Minor gfs2_quota_init error path cleanup gfs2: Get rid of demote_ok checks Revert "GFS2: Don't add all glocks to the lru" gfs2: Revise glock reference counting model gfs2: Switch to a per-filesystem glock workqueue gfs2: Report when glocks cannot be freed for a long time gfs2: gfs2_glock_get cleanup ... -
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlmLinus Torvalds authored
Pull dlm updates from David Teigland: - New flag DLM_LSFL_SOFTIRQ_SAFE can be set by code using dlm to indicate callbacks can be run from softirq - Change md-cluster to set DLM_LSFL_SOFTIRQ_SAFE - Clean up for previous changes, e.g. unused code and parameters - Remove custom pre-allocation of rsb structs which is unnecessary with kmem caches - Change idr to xarray for lkb structs in use - Change idr to xarray for rsb structs being recovered - Change outdated naming related to internal rsb states - Fix some incorrect add/remove of rsb on scan list - Use rcu to free rsb structs * tag 'dlm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: add rcu_barrier before destroy kmem cache dlm: remove DLM_LSFL_SOFTIRQ from exflags fs: dlm: remove unused struct 'dlm_processed_nodes' md-cluster: use DLM_LSFL_SOFTIRQ for dlm_new_lockspace() dlm: implement LSFL_SOFTIRQ_SAFE dlm: introduce DLM_LSFL_SOFTIRQ_SAFE dlm: use LSFL_FS to check for kernel lockspace dlm: use rcu to avoid an extra rsb struct lookup dlm: fix add_scan and del_scan usage dlm: change list and timer names dlm: move recover idr to xarray datastructure dlm: move lkb idr to xarray datastructure dlm: drop own rsb pre allocation mechanism dlm: remove ls_local_handle from struct dlm_ls dlm: remove unused parameter in dlm_midcomms_addr dlm: don't kref_init rsbs created for toss list dlm: remove scand leftovers
-
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofsLinus Torvalds authored
Pull erofs updates from Gao Xiang: "Updates for folio conversions for compressed inodes: While large folio support for compressed data could work now, it remains disabled since the stress test could hang due to page migration in a few hours after enabling it. I need more time to investigate further before enabling this feature. Additionally, clean up stream decompressors and tracepoints for simplicity. Summary: - More folio conversions for compressed inodes - Stream decompressor (LZMA/DEFLATE/ZSTD) cleanups - Minor tracepoint cleanup" * tag 'erofs-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: silence uninitialized variable warning in z_erofs_scan_folio() erofs: avoid refcounting short-lived pages erofs: get rid of z_erofs_map_blocks_iter_* tracepoints erofs: tidy up stream decompressors erofs: refine z_erofs_{init,exit}_subsystem() erofs: move each decompressor to its own source file erofs: tidy up `struct z_erofs_bvec` erofs: teach z_erofs_scan_folios() to handle multi-page folios erofs: convert z_erofs_read_fragment() to folios erofs: convert z_erofs_pcluster_readmore() to folios
-
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull nfsd updates from Chuck Lever: "This is a light release containing optimizations, code clean-ups, and minor bug fixes. This development cycle focused on work outside of upstream kernel development: - Continuing to build upstream CI for NFSD based on kdevops - Continuing to focus on the quality of NFSD in LTS kernels - Participation in IETF nfsv4 WG discussions about NFSv4 ACLs, directory delegation, and NFSv4.2 COPY offload Notable features for v6.11 that do not come through the NFSD tree include NFS server-side support for the new pNFS NVMe layout type [RFC9561]. Functional testing for pNFS block layouts like this one has been introduced to our kdevops CI harness. Work on improving the resolution of file attribute time stamps in local filesystems is also ongoing tree-wide. As always I am grateful to NFSD contributors, reviewers, testers, and bug reporters who participated during this cycle" * tag 'nfsd-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: nfsd_file_lease_notifier_call gets a file_lease as an argument gss_krb5: Fix the error handling path for crypto_sync_skcipher_setkey MAINTAINERS: Add a bugzilla link for NFSD nfsd: new netlink ops to get/set server pool_mode sunrpc: refactor pool_mode setting code nfsd: allow passing in array of thread counts via netlink nfsd: make nfsd_svc take an array of thread counts sunrpc: fix up the special handling of sv_nrpools == 1 SUNRPC: Add a trace point in svc_xprt_deferred_close NFSD: Support write delegations in LAYOUTGET lockd: Use *-y instead of *-objs in Makefile NFSD: Fix nfsdcld warning svcrdma: Handle ADDR_CHANGE CM event properly svcrdma: Refactor the creation of listener CMA ID NFSD: remove unused structs 'nfsd3_voidargs' NFSD: harden svcxdr_dupstr() and svcxdr_tmpalloc() against integer overflows -
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull affs updates from David Sterba: - conversions of one-element arrays to flexible arrays * tag 'affs-6.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: affs: struct slink_front: Replace 1-element array with flexible array affs: struct affs_data_head: Replace 1-element array with flexible array affs: struct affs_head: Replace 1-element array with flexible array
-
Steven Rostedt (Google) authored
Gone but never forgotten. [ Also moved Daniel's name to be consistent with the alphabetical order ] Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Clark Williams <williams@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: John Kacur <jkacur@redhat.com> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lore.kernel.org/20240715144745.51d887a9@rorschach.local.homeReviewed-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds authored
Pull networking updates from Jakub Kicinski: "Not much excitement - a handful of large patchsets (devmem among them) did not make it in time. Core & protocols: - Use local_lock in addition to local_bh_disable() to protect per-CPU resources in networking, a step closer for local_bh_disable() not to act as a big lock on PREEMPT_RT - Use flex array for netdevice priv area, ensure its cache alignment - Add a sysctl knob to allow user to specify a default rto_min at socket init time. Bit of a big hammer but multiple companies were independently carrying such patch downstream so clearly it's useful - Support scheduling transmission of packets based on CLOCK_TAI - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off using cpusets - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address - Allow configuration of multipath hash seed, to both allow synchronizing hashing of two routers, and preventing partial accidental sync - Improve TCP compliance with RFC 9293 for simultaneous connect() - Support sending NAT keepalives in IPsec ESP in UDP states. Userspace IKE daemon had to do this before, but the kernel can better keep track of it - Support sending supervision HSR frames with MAC addresses stored in ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled - Introduce IPPROTO_SMC for selecting SMC when socket is created - Allow UDP GSO transmit from devices with no checksum offload - openvswitch: add packet sampling via psample, separating the sampled traffic from "upcall" packets sent to user space for forwarding - nf_tables: shrink memory consumption for transaction objects Things we sprinkled into general kernel code: - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for QCA6390) [ Already merged separately - Linus ] - Add IRQ information in sysfs for auxiliary bus - Introduce guard definition for local_lock - Add aligned flavor of __cacheline_group_{begin, end}() markings for grouping fields in structures BPF: - Notify user space (via epoll) when a struct_ops object is getting detached/unregistered - Add new kfuncs for a generic, open-coded bits iterator - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and bpf_list_head - Support resilient split BTF which cuts down on duplication and makes BTF as compact as possible WRT BTF from modules - Add support for dumping kfunc prototypes from BTF which enables both detecting as well as dumping compilable prototypes for kfuncs - riscv64 BPF JIT improvements in particular to add 12-argument support for BPF trampolines and to utilize bpf_prog_pack for the latter - Add the capability to offload the netfilter flowtable in XDP layer through kfuncs Driver API: - Allow users to configure IRQ tresholds between which automatic IRQ moderation can choose - Expand Power Sourcing (PoE) status with power, class and failure reason. Support setting power limits - Track additional RSS contexts in the core, make sure configuration changes don't break them - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP data paths - Support updating firmware on SFP modules Tests and tooling: - mptcp: use net/lib.sh to manage netns - TCP-AO and TCP-MD5: replace debug prints used by tests with tracepoints - openvswitch: make test self-contained (don't depend on OvS CLI tools) Drivers: - Ethernet high-speed NICs: - Broadcom (bnxt): - increase the max total outstanding PTP TX packets to 4 - add timestamping statistics support - implement netdev_queue_mgmt_ops - support new RSS context API - Intel (100G, ice, idpf): - implement FEC statistics and dumping signal quality indicators - support E825C products (with 56Gbps PHYs) - nVidia/Mellanox: - support HW-GRO - mlx4/mlx5: support per-queue statistics via netlink - obey the max number of EQs setting in sub-functions - AMD/Solarflare: - support new RSS context API - AMD/Pensando: - ionic: rework fix for doorbell miss to lower overhead and skip it on new HW - Wangxun: - txgbe: support Flow Director perfect filters - Ethernet NICs consumer, embedded and virtual: - Add driver for Tehuti Networks TN40xx chips - Add driver for Meta's internal NIC chips - Add driver for Ethernet MAC on Airoha EN7581 SoCs - Add driver for Renesas Ethernet-TSN devices - Google cloud vNIC: - flow steering support - Microsoft vNIC: - support page sizes other than 4KB on ARM64 - vmware vNIC: - support latency measurement (update to version 9) - VirtIO net: - support for Byte Queue Limits - support configuring thresholds for automatic IRQ moderation - support for AF_XDP Rx zero-copy - Synopsys (stmmac): - support for STM32MP13 SoC - let platforms select the right PCS implementation - TI: - icssg-prueth: add multicast filtering support - icssg-prueth: enable PTP timestamping and PPS - Renesas: - ravb: improve Rx performance 30-400% by using page pool, theaded NAPI and timer-based IRQ coalescing - ravb: add MII support for R-Car V4M - Cadence (macb): - macb: add ARP support to Wake-On-LAN - Cortina: - use phylib for RX and TX pause configuration - Ethernet switches: - nVidia/Mellanox: - support configuration of multipath hash seed - report more accurate max MTU - use page_pool to improve Rx performance - MediaTek: - mt7530: add support for bridge port isolation - Qualcomm: - qca8k: add support for bridge port isolation - Microchip: - lan9371/2: add 100BaseTX PHY support - NXP: - vsc73xx: implement VLAN operations - Ethernet PHYs: - aquantia: enable support for aqr115c - aquantia: add support for PHY LEDs - realtek: add support for rtl8224 2.5Gbps PHY - xpcs: add memory-mapped device support - add BroadR-Reach link mode and support in Broadcom's PHY driver - CAN: - add document for ISO 15765-2 protocol support - mcp251xfd: workaround for erratum DS80000789E, use timestamps to catch when device returns incorrect FIFO status - WiFi: - mac80211/cfg80211: - parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers - improvements for 6 GHz regulatory flexibility - multi-link improvements - support multiple radios per wiphy - remove DEAUTH_NEED_MGD_TX_PREP flag - Intel (iwlwifi): - bump FW API to 91 for BZ/SC devices - report 64-bit radiotap timestamp - enable P2P low latency by default - handle Transmit Power Envelope (TPE) advertised by AP - remove support for older FW for new devices - fast resume (keeping the device configured) - mvm: re-enable Multi-Link Operation (MLO) - aggregation (A-MSDU) optimizations - MediaTek (mt76): - mt7925 Multi-Link Operation (MLO) support - Qualcomm (ath10k): - LED support for various chipsets - Qualcomm (ath12k): - remove unsupported Tx monitor handling - support channel 2 in 6 GHz band - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) - support dynamic VLAN - add panic handler for resetting the firmware state - DebugFS support for datapath statistics - WCN7850: support for Wake on WLAN - Microchip (wilc1000): - read MAC address during probe to make it visible to user space - suspend/resume improvements - TI (wl18xx): - support newer firmware versions - RealTek (rtw89): - preparation for RTL8852BE-VT support - Wake on WLAN support for WiFi 6 chips - 36-bit PCI DMA support - RealTek (rtlwifi): - RTL8192DU support - Broadcom (brcmfmac): - Management Frame Protection support (to enable WPA3) - Bluetooth: - qualcomm: use the power sequencer for QCA6390 - btusb: mediatek: add ISO data transmission functions - hci_bcm4377: add BCM4388 support - btintel: add support for BlazarU core - btintel: add support for Whale Peak2 - btnxpuart: add support for AW693 A1 chipset - btnxpuart: add support for IW615 chipset - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591" * tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits) eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering" tcp: Replace strncpy() with strscpy() wifi: ath12k: fix build vs old compiler tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child(). eth: fbnic: Write the TCAM tables used for RSS control and Rx to host eth: fbnic: Add L2 address programming eth: fbnic: Add basic Rx handling eth: fbnic: Add basic Tx handling eth: fbnic: Add link detection eth: fbnic: Add initial messaging to notify FW of our presence eth: fbnic: Implement Rx queue alloc/start/stop/free eth: fbnic: Implement Tx queue alloc/start/stop/free eth: fbnic: Allocate a netdevice and napi vectors with queues eth: fbnic: Add FW communication mechanism eth: fbnic: Add message parsing for FW messages eth: fbnic: Add register init to set PCIe/Ethernet device config eth: fbnic: Allocate core device specific structures and devlink interface eth: fbnic: Add scaffolding for Meta's NIC driver PCI: Add Meta Platforms vendor ID net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK ... -
Linus Torvalds authored
Merge tag 'linux_kselftest-next-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: - change resctrl test to cleanup resctrl_val() and generalize it by removing test name specific handling from the function. - several clang build failure fixes to framework and tests - add tests to verify IFS (In Field Scan) driver functionality - cleanups to remove unused variables and document changes * tag 'linux_kselftest-next-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (33 commits) selftests: ifs: verify IFS ARRAY BIST functionality selftests: ifs: verify IFS scan test functionality selftests: ifs: verify test image loading functionality selftests: ifs: verify test interfaces are created by the driver selftests/dma:remove unused variable selftests/breakpoints:Remove unused variable selftests/x86: fix printk warnings reported by clang selftests/x86: remove (or use) unused variables and functions selftests/x86: avoid -no-pie warnings from clang during compilation selftests/x86: build sysret_rip.c with clang selftests/x86: build fsgsbase_restore.c with clang selftests: x86: test_FISTTP: use fisttps instead of ambiguous fisttp selftests/x86: fix Makefile dependencies to work with clang selftests/timers: remove unused irqcount variable selftests: Add information about TAP conformance in tests selftests/resctrl: Remove test name comparing from write_bm_pid_to_resctrl() selftests/resctrl: Remove mongrp from CMT test selftests/resctrl: Remove mongrp from MBA test selftests/resctrl: Convert ctrlgrp & mongrp to pointers selftests/resctrl: Make some strings passed to resctrlfs functions const ...
-
Linus Torvalds authored
Merge tag 'linux_kselftest-kunit-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit updates from Shuah Khan: - add vm_mmap() allocation resource manager - convert usercopy kselftest to KUnit - disable usercopy testing on !CONFIG_MMU - add MODULE_DESCRIPTION() to core, list, and usercopy tests - add tests for assertion formatting functions - assert.c - introduce KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros - fix KUNIT_ASSERT_STRNEQ comments to make it clear that it is an assertion - rename KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT * tag 'linux_kselftest-kunit-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: Introduce KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros kunit: Rename KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT for readability kunit: Fix the comment of KUNIT_ASSERT_STRNEQ as assertion kunit: executor: Simplify string allocation handling kunit/usercopy: Add missing MODULE_DESCRIPTION() kunit/usercopy: Disable testing on !CONFIG_MMU usercopy: Convert test_user_copy to KUnit test kunit: test: Add vm_mmap() allocation resource manager list: test: add the missing MODULE_DESCRIPTION() macro kunit: add missing MODULE_DESCRIPTION() macros to core modules list: test: remove unused struct 'klist_test_struct' kunit: Cover 'assert.c' with tests
-
Linus Torvalds authored
The Qualcomm firmware code shouldn't ask about what memory allocator mode should be used when the code isn't even enabled. Get rid of pointless config-time question. Link: https://lore.kernel.org/all/CAHk-=wg+38EHPKGou1MqXwAAXC30cM8sMgZAGnZ7TcFO4L9J2w@mail.gmail.com/Signed-off-by:
-
Linus Torvalds authored
UML should not be using the architecture native runtime constants, since that requires also having the appropriate instruction fixups (and all the linker script details). Not that using that code would be impossible, but it's not worth it. Just point UML at the generic version. Reported-by:
Nathan Chancellor <nathan@kernel.org> Fixes: e3c92e81 ("runtime constants: add x86 architecture support") Link: https://lore.kernel.org/all/20240716143644.GA1827132@thelio-3990X/Signed-off-by:
-
