- 16 Jun, 2016 1 commit
-
-
Arnd Bergmann authored
A newly introduced function has 'const int' as the return type, but as "make W=1" reports, that has no meaning: drivers/md/dm-raid.c:510:18: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers] This changes the return type to plain 'int'. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 33e53f06 ("dm raid: introduce extended superblock and new raid types to support takeover/reshaping") Signed-off-by:
Mike Snitzer <snitzer@redhat.com>
-
- 14 Jun, 2016 20 commits
-
-
Heinz Mauelshagen authored
Superblock updates where bogus causing some takovers/reshapes to fail. Introduce new runtime flag (RT_FLAG_KEEP_RS_FROZEN) to keep a raid set frozen when a layout change was requested. Userpace will immediately reload the table w/o the flags requesting such change once they made it to the superblocks and any change of recovery/reshape offsets has to be avoided until after read. Signed-off-by:
Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by:
-
Heinz Mauelshagen authored
Signed-off-by:
-
Heinz Mauelshagen authored
Signed-off-by:
-
Heinz Mauelshagen authored
Add bool functions rs_is_recovering and rs_is_reshaping() to test for ongoing recovery/reshaping respectively in order to reject respective requests on ongoing ones. Remove ctr array size check, because ti->len and array sectors will differ during disk addition/removal reshape. Use __is_raid10_near() rather than type string compare. Introduce rs_check_reshape() and rs_start_reshape(), use the former in the ctr to reject bogus rehsape requests and the latter in preresume to actually start a reshape. Signed-off-by:
-
Heinz Mauelshagen authored
Add rs_is_reshapable(), rs_data_stripes(), rs_reshape_requested(), rs_set_dev_and_array_sectors() and rs_adjust_data_offsets() Remove superfluous check for reshape message Correct runtime bit definitions to be incremental Signed-off-by:
-
Heinz Mauelshagen authored
It is more intuitive to manage each raid level's features in terms of what is supported rather than what isn't supported. Signed-off-by:
-
Mike Snitzer authored
Renamed functions and variables with leading single underscore to have a double underscore. Renamed some functions to have better names. Folded functions that were split out without reason. Signed-off-by: -
Mike Snitzer authored
Signed-off-by: -
Mike Snitzer authored
Removes obfuscation that is of little value. Signed-off-by: -
Mike Snitzer authored
Signed-off-by: -
Mike Snitzer authored
Also update module description to "raid0/1/10/4/5/6 target" Reported by Alasdair G Kergon <agk@redhat.com> Signed-off-by: -
Mike Snitzer authored
Signed-off-by: -
Mike Snitzer authored
No idea what Heinz was doing with the versioning but upstream commit 4c9971ca ("dm raid: make sure no feature flags are set in metadata") bumped to 1.8.0 already. Signed-off-by:
-
Mike Snitzer authored
There ti_error_* wrappers added very little. No other DM target has ever gone to such lengths to wrap setting ti->error. Also fixes some NULL derefences via rs->ti->error. Signed-off-by: -
Mike Snitzer authored
Signed-off-by:
-
Heinz Mauelshagen authored
The target's status interface has to provide the new 'data_offset' value to allow userspace to retrieve the kernels offset to the data on each raid device of a raid set. This is the base for out-of-place reshaping required to not write over any data during reshaping (e.g. change raid6_zr -> raid6_nc): - add rs_set_cur() to be able to start up existing array in case of no takeover; use in ctr on takeover check - enhance raid_status() - add supporting functions to get resync/reshape progress and raid device status chars - fixup rebuild table line output race, which does miss to emit 'rebuild N' on fully synced/rebuild devices, because it is relying on the transient 'In_sync' raid device flag - add new status line output for 'data_offset', which'll later be used for out-of-place reshaping - fixup takeover not working for all levels - fixup raid0 message interface oops caused by missing checks for the md threads, which don't exist in case of raid0 - remove ALL_FREEZE_FLAGS not needed for takeover - adjust comments Signed-off-by:
-
Heinz Mauelshagen authored
Add raid level takeover support allowing arbitrary takeovers between raid levels supported by md personalities (i.e. raid0, raid1/10 and raid4/5/6): - add rs_config_{backup|restore} function to allow for temporary storing ctr requested layout changes and restore them for takeover conersion decision after the superblocks got loaded and analyzed - add members to store layout to 'struct raid_set' (not mandatory for takeover but needed for reshape in later patch) - add rebuild_disks bitfield to 'struct raid_set' and set bits in ctr to use in setting up takeover (base to address a 'rebuild' related raid_status() table line bug and needed as well for reshape in future patch) - add runtime flags and respective manipulation functions to be able to control e.g. wrting of superlocks to the preresume function on takeover and (later) reshape - add functions to detect takeover, check it's valid (mandatory here to avoid failing on md_run()), setup for it and use in the ctr; those will be likely moved out once reshaping gets added to simplify the ctr - start raid set readonly in ctr and switch to readwrite, optionally updating superblocks, in preresume in order to allow suspend to quiesce any active table before (which involves superblock updates); this ensures the proper sequence of writing the current and any new takeover(/reshape) metadata Signed-off-by: -
Heinz Mauelshagen authored
Add transferring the new takeover/reshape related superblock members introduced to the super_sync() function: - add/move supporting functions - add failed devices bitfield transfer functions to retrieve the bitfield from superblock format or update it in the superblock - add code to transfer all new members Signed-off-by:
-
Heinz Mauelshagen authored
Support the follwoing arguments in the ctr parameter parser: - add 'delta_disks', 'data_offset' taking int and sector respectively - 'raid10_use_near_sets' bool argument to optionally select near sets with supporting raid10 mappings Signed-off-by:
-
Heinz Mauelshagen authored
Add new members to the dm-raid superblock and new raid types to support takeover/reshape. Add all necessary members needed to support takeover and reshape in one go -- aiming to limit the amount of changes to the superblock layout. This is a larger patch due to the new superblock members, their related flags, validation of both and involved API additions/changes: - add additional members to keep track of: - state about forward/backward reshaping - reshape position - new level, layout, stripe size and delta disks - data offset to current and new data for out-of-place reshapes - failed devices bitfield extensions to keep track of max raid devices - adjust super_validate() to cope with new superblock members - adjust super_init_validation() to cope with new superblock members - add definitions for ctr flags supporting delta disks etc. - add new raid types (raid6_n_6 etc.) - add new raid10 supporting function API (_is_raid10_*()) - adjust to changed raid10 supporting function API Signed-off-by:
-
- 13 Jun, 2016 6 commits
-
-
Heinz Mauelshagen authored
Make use if raid type rt_is_*() bool functions for simplification and consistency reasons. Signed-off-by:
-
Heinz Mauelshagen authored
- add _test_flags() function - use it to simplify rs_check_for_invalid_flags() - use _test_flag() throughout Signed-off-by:
-
Heinz Mauelshagen authored
Reject invalid flag combinations to avoid potential data corruption or failing raid set construction: - add definitions for constructor flag combinations and invalid flags per level - add bool test functions for the various raid types (also will be used by future reshaping enhancements) - introduce rs_check_for_invalid_flags() and _invalid_flags() to perform the validity checks Signed-off-by:
-
Heinz Mauelshagen authored
Provide necessary infrastructure to handle ctr flags and their names and cleanup setting ti->error: - comment constructor flags - introduce constructor flag manipulation - introduce ti_error_*() functions to simplify setting the error message (use in other targets?) - introduce array to hold ctr flag <-> flag name mapping - introduce argument name by flag functions for that array - use those functions throughout the ctr call path Signed-off-by:
-
Heinz Mauelshagen authored
- use dm_arg_set API in ctr and its callees parse_raid_params() and dev_parms() - introduce _in_range() function to check a value is in a [ min, max ] range; this is to support more callers in parsing parameters etc. in the future - correct comment on MAX_RAID_DEVICES Signed-off-by:
-
Heinz Mauelshagen authored
Signed-off-by:
-
- 10 Jun, 2016 5 commits
-
-
Mike Snitzer authored
Allow a user to specify an optional feature 'queue_mode <mode>' where <mode> may be "bio", "rq" or "mq" -- which corresponds to bio-based, request_fn rq-based, and blk-mq rq-based respectively. If the queue_mode feature isn't specified the default for the "multipath" target is still "rq" but if dm_mod.use_blk_mq is set to Y it'll default to mode "mq". This new queue_mode feature introduces the ability for each multipath device to have its own queue_mode (whereas before this feature all multipath devices effectively had to have the same queue_mode). This commit also goes a long way to eliminate the awkward (ab)use of DM_TYPE_*, the associated filter_md_type() and other relatively fragile and difficult to maintain code. Signed-off-by: -
Mike Snitzer authored
Signed-off-by: -
Mike Snitzer authored
Add "multipath-bio" target that offers a bio-based multipath target as an alternative to the request-based "multipath" target -- but in a following commit "multipath-bio" will immediately be replaced by a new "queue_mode" feature for the "multipath" target which will allow bio-based mode to be selected. When DM multipath was originally converted from bio-based to request-based the motivation for the change was better dynamic load balancing (by leveraging block core's request-based IO schedulers, for merging and sorting, _before_ DM multipath would make the decision on where to steer the IO -- based on path load and/or availability). More background is available in this "Request-based Device-mapper multipath and Dynamic load balancing" paper: https://www.kernel.org/doc/ols/2007/ols2007v2-pages-235-244.pdf But we've now come full circle where significantly faster storage devices no longer need IOs to be made larger to drive optimal IO performance. And even if they do there have been changes to the block and filesystem layers that help ensure upper layers are constructing larger IOs. In addition, SCSI's differentiated IO errors will propagate through to bio-based IO completion hooks -- so that eliminates another historic justiciation for request-based DM multipath. Lastly, the block layer's immutable biovec changes have made bio cloning cheaper than it has ever been; whereas request cloning is still relatively expensive (both on a CPU usage and memory footprint level). As such, bio-based DM multipath offers the promise of a more efficient IO path for high IOPs devices that are, or will be, emerging. Signed-off-by:
-
Mike Snitzer authored
Add some seperation between bio-based and request-based DM core code. 'struct mapped_device' and other DM core only structures and functions have been moved to dm-core.h and all relevant DM core .c files have been updated to include dm-core.h rather than dm.h DM targets should _never_ include dm-core.h! [block core merge conflict resolution from Stephen Rothwell] Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au>
-
Ming Lei authored
No one need this macro now, so remove it. Basically only how many bvecs in one bio matters instead of how many bytes in this bio. The motivation is for supporting multipage bvecs, in which we only know what the max count of bvecs is supported in the bio. Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
- 09 Jun, 2016 8 commits
-
-
Jens Axboe authored
If we're queuing REQ_PRIO IO and the task is running at an idle IO class, then temporarily boost the priority. This prevents livelocks due to priority inversion, when a low priority task is holding file system resources while attempting to do IO. An example of that is shown below. An ioniced idle task is holding the directory mutex, while a normal priority task is trying to do a directory lookup. [478381.198925] ------------[ cut here ]------------ [478381.200315] INFO: task ionice:1168369 blocked for more than 120 seconds. [478381.201324] Not tainted 4.0.9-38_fbk5_hotfix1_2936_g85409c6 #1 [478381.202278] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [478381.203462] ionice D ffff8803692736a8 0 1168369 1 0x00000080 [478381.203466] ffff8803692736a8 ffff880399c21300 ffff880276adcc00 ffff880369273698 [478381.204589] ffff880369273fd8 0000000000000000 7fffffffffffffff 0000000000000002 [478381.205752] ffffffff8177d5e0 ffff8803692736c8 ffffffff8177cea7 0000000000000000 [478381.206874] Call Trace: [478381.207253] [<ffffffff8177d5e0>] ? bit_wait_io_timeout+0x80/0x80 [478381.208175] [<ffffffff8177cea7>] schedule+0x37/0x90 [478381.208932] [<ffffffff8177f5fc>] schedule_timeout+0x1dc/0x250 [478381.209805] [<ffffffff81421c17>] ? __blk_run_queue+0x37/0x50 [478381.210706] [<ffffffff810ca1c5>] ? ktime_get+0x45/0xb0 [478381.211489] [<ffffffff8177c407>] io_schedule_timeout+0xa7/0x110 [478381.212402] [<ffffffff810a8c2b>] ? prepare_to_wait+0x5b/0x90 [478381.213280] [<ffffffff8177d616>] bit_wait_io+0x36/0x50 [478381.214063] [<ffffffff8177d325>] __wait_on_bit+0x65/0x90 [478381.214961] [<ffffffff8177d5e0>] ? bit_wait_io_timeout+0x80/0x80 [478381.215872] [<ffffffff8177d47c>] out_of_line_wait_on_bit+0x7c/0x90 [478381.216806] [<ffffffff810a89f0>] ? wake_atomic_t_function+0x40/0x40 [478381.217773] [<ffffffff811f03aa>] __wait_on_buffer+0x2a/0x30 [478381.218641] [<ffffffff8123c557>] ext4_bread+0x57/0x70 [478381.219425] [<ffffffff8124498c>] __ext4_read_dirblock+0x3c/0x380 [478381.220467] [<ffffffff8124665d>] ext4_dx_find_entry+0x7d/0x170 [478381.221357] [<ffffffff8114c49e>] ? find_get_entry+0x1e/0xa0 [478381.222208] [<ffffffff81246bd4>] ext4_find_entry+0x484/0x510 [478381.223090] [<ffffffff812471a2>] ext4_lookup+0x52/0x160 [478381.223882] [<ffffffff811c401d>] lookup_real+0x1d/0x60 [478381.224675] [<ffffffff811c4698>] __lookup_hash+0x38/0x50 [478381.225697] [<ffffffff817745bd>] lookup_slow+0x45/0xab [478381.226941] [<ffffffff811c690e>] link_path_walk+0x7ae/0x820 [478381.227880] [<ffffffff811c6a42>] path_init+0xc2/0x430 [478381.228677] [<ffffffff813e6e26>] ? security_file_alloc+0x16/0x20 [478381.229776] [<ffffffff811c8c57>] path_openat+0x77/0x620 [478381.230767] [<ffffffff81185c6e>] ? page_add_file_rmap+0x2e/0x70 [478381.232019] [<ffffffff811cb253>] do_filp_open+0x43/0xa0 [478381.233016] [<ffffffff8108c4a9>] ? creds_are_invalid+0x29/0x70 [478381.234072] [<ffffffff811c0cb0>] do_open_execat+0x70/0x170 [478381.235039] [<ffffffff811c1bf8>] do_execveat_common.isra.36+0x1b8/0x6e0 [478381.236051] [<ffffffff811c214c>] do_execve+0x2c/0x30 [478381.236809] [<ffffffff811ca392>] ? getname+0x12/0x20 [478381.237564] [<ffffffff811c23be>] SyS_execve+0x2e/0x40 [478381.238338] [<ffffffff81780a1d>] stub_execve+0x6d/0xa0 [478381.239126] ------------[ cut here ]------------ [478381.239915] ------------[ cut here ]------------ [478381.240606] INFO: task python2.7:1168375 blocked for more than 120 seconds. [478381.242673] Not tainted 4.0.9-38_fbk5_hotfix1_2936_g85409c6 #1 [478381.243653] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [478381.244902] python2.7 D ffff88005cf8fb98 0 1168375 1168248 0x00000080 [478381.244904] ffff88005cf8fb98 ffff88016c1f0980 ffffffff81c134c0 ffff88016c1f11a0 [478381.246023] ffff88005cf8ffd8 ffff880466cd0cbc ffff88016c1f0980 00000000ffffffff [478381.247138] ffff880466cd0cc0 ffff88005cf8fbb8 ffffffff8177cea7 ffff88005cf8fcc8 [478381.248252] Call Trace: [478381.248630] [<ffffffff8177cea7>] schedule+0x37/0x90 [478381.249382] [<ffffffff8177d08e>] schedule_preempt_disabled+0xe/0x10 [478381.250465] [<ffffffff8177e892>] __mutex_lock_slowpath+0x92/0x100 [478381.251409] [<ffffffff8177e91b>] mutex_lock+0x1b/0x2f [478381.252199] [<ffffffff817745ae>] lookup_slow+0x36/0xab [478381.253023] [<ffffffff811c690e>] link_path_walk+0x7ae/0x820 [478381.253877] [<ffffffff811aeb41>] ? try_charge+0xc1/0x700 [478381.254690] [<ffffffff811c6a42>] path_init+0xc2/0x430 [478381.255525] [<ffffffff813e6e26>] ? security_file_alloc+0x16/0x20 [478381.256450] [<ffffffff811c8c57>] path_openat+0x77/0x620 [478381.257256] [<ffffffff8115b2fb>] ? lru_cache_add_active_or_unevictable+0x2b/0xa0 [478381.258390] [<ffffffff8117b623>] ? handle_mm_fault+0x13f3/0x1720 [478381.259309] [<ffffffff811cb253>] do_filp_open+0x43/0xa0 [478381.260139] [<ffffffff811d7ae2>] ? __alloc_fd+0x42/0x120 [478381.260962] [<ffffffff811b95ac>] do_sys_open+0x13c/0x230 [478381.261779] [<ffffffff81011393>] ? syscall_trace_enter_phase1+0x113/0x170 [478381.262851] [<ffffffff811b96c2>] SyS_open+0x22/0x30 [478381.263598] [<ffffffff81780532>] system_call_fastpath+0x12/0x17 [478381.264551] ------------[ cut here ]------------ [478381.265377] ------------[ cut here ]------------ Signed-off-by:
Jeff Moyer <jmoyer@redhat.com>
-
Ming Lei authored
Use BIO_MAX_PAGES instead and we will remove BIO_MAX_SIZE. Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Ming Lei authored
No one need this macro, so remove it. The motivation is for supporting multipage bvecs, in which we only know what the max count of bvecs is supported in the bio, instead of max size or max sectors. Reviewed-by:
-
Ming Lei authored
BIO_MAX_PAGES is used as maximum count of bvecs, so replace BIO_MAX_SECTORS with BIO_MAX_PAGES since BIO_MAX_SECTORS is to be removed. Reviewed-by:
-
Ming Lei authored
bvec has one native/mature iterator for long time, so not necessary to use the reinvented wheel for iterating bvecs in lib/iov_iter.c. Two ITER_BVEC test cases are run: - xfstest(-g auto) on loop dio/aio, no regression found - swap file works well under extreme stress(stress-ng --all 64 -t 800 -v), and lots of OOMs are triggerd, and the whole system still survives Reviewed-by:
-
Ming Lei authored
bvec_iter_advance() only writes the parameter of iterator, so the base address of bvec can be marked as const safely. Without the change, we can see compiling warning in the following patch for implementing iterate_bvec(): lib/iov_iter.c with bvec iterator. Reviewed-by:
-
Ming Lei authored
This patch moves 'struct bio_vec' and 'struct bvec_iter' into 'include/linux/bvec.h', then always include this header into 'include/linux/blk_types.h'. With this change, both 'struct bvec_iter' and bvec iterator helpers don't depend on CONFIG_BLOCK any more, then we can use bvec iterator to implement iterate_bvec(): lib/iov_iter.c. Reviewed-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
Ming Lei authored
bvec iterator helpers should be used to implement by iterate_bvec():lib/iov_iter.c too, and move them into one header, so that we can keep bvec iterator header out of CONFIG_BLOCK. Then we can remove the reinventing of wheel in iterate_bvec(). Reviewed-by:
-
