- 12 Dec, 2022 1 commit
-
-
Paul Cercueil authored
Use the DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to handle the .suspend/.resume callbacks. These macros allow the suspend and resume functions to be automatically dropped by the compiler when CONFIG_SUSPEND is disabled, without having to use #ifdef guards. This has the advantage of always compiling these functions in, independently of any Kconfig option. Thanks to that, bugs and other regressions are subsequently easier to catch. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221129191733.137897-9-paul@crapouillou.net
-
- 09 Dec, 2022 19 commits
-
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20221118224540.619276-38-uwe@kleine-koenig.orgSigned-off-by:
Robert Foss <robert.foss@linaro.org>
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
- 08 Dec, 2022 20 commits
-
-
Stefan Eichenberger authored
Enable hot plug detection when it is available on the HDMI port. Without this connecting to a different monitor with incompatible timing before the 10 seconds poll period will lead to a broken display output. Fixes: 30e2ae94 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by:
Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by:
Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by:
Adrien Grassein <adrien.grassein@gmail.com> Reviewed-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Noralf Trønnes authored
Add missing vmalloc.h include. Fixes: c17d0486 ("drm/gud: Use the shadow plane helper") Reported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221207-gud-missing-include-v1-0-c5b32c9c59da@tronnes.org
-
Dave Stevenson authored
The exact behaviour of DSI host controllers is not specified, therefore define it. Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by:
Maxime Ripard <maxime@cerno.tech>
-
Dave Stevenson authored
Mapping to the drm_bridge flag pre_enable_prev_first, add a new flag prepare_prev_first to drm_panel to allow the panel driver to request that the upstream bridge should be pre_enabled before the panel prepare. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221205173328.1395350-6-dave.stevenson@raspberrypi.comSigned-off-by:
-
Dave Stevenson authored
DSI sink devices typically want the DSI host powered up and configured before they are powered up. pre_enable is the place this would normally happen, but they are called in reverse order from panel/connector towards the encoder, which is the "wrong" order. Add a new flag pre_enable_prev_first that any bridge can set to swap the order of pre_enable (and post_disable) for that and the immediately previous bridge. Should the immediately previous bridge also set the pre_enable_prev_first flag, the previous bridge to that will be called before either of those which requested pre_enable_prev_first. eg: - Panel - Bridge 1 - Bridge 2 pre_enable_prev_first - Bridge 3 - Bridge 4 pre_enable_prev_first - Bridge 5 pre_enable_prev_first - Bridge 6 - Encoder Would result in pre_enable's being called as Panel, Bridge 1, Bridge 3, Bridge 2, Bridge 6, Bridge 5, Bridge 4, Encoder. Signed-off-by:
Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by:
-
Sam Ravnborg authored
The drm_bridge_chain_{pre_enable,enable,disable,post_disable} has no users left and we have atomic variants that should be used. Drop them so they do not gain new users. Adjust a few comments to avoid references to the dropped functions. Signed-off-by:Maxime Ripard <mripard@kernel.org> Reviewed-by:
-
Dave Stevenson authored
Commit f70ac097 ("drm/mediatek: Add MT8195 Embedded DisplayPort driver") added usage of the drm_bridge_chain_ functions which are to be deprecated. Replace with the drm_atomic_bridge_chain_ variants using the current state. Signed-off-by:
-
Sam Ravnborg authored
The atomic variants of enable/disable in drm_bridge_funcs are the preferred operations - introduce these. The ps8640 driver used the non-atomic variants of the drm_bridge_chain_pre_enable/ drm_bridge_chain_post_disable - convert these to the atomic variants. v2: - Init state operations in drm_bridge_funcs (Laurent) Signed-off-by:
-
Maxime Ripard authored
Now that we have VC4-specific tests in place, let's document them properly. Reviewed-by:
Maíra Canal <mcanal@igalia.com> Link: https://lore.kernel.org/r/20221123-rpi-kunit-tests-v3-20-4615a663a84a@cerno.techSigned-off-by:
-
Maxime Ripard authored
The HVS to PixelValve muxing code is fairly error prone and has a bunch of arbitrary constraints due to the hardware setup. Let's create a test suite that makes sure that the possible combinations work and the invalid ones don't. Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
-
Maxime Ripard authored
Accessing a register when running under kunit is a bad idea since our device is completely mocked. Fail the current test if we ever access any of our hardware registers. Reviewed-by:
-
Maxime Ripard authored
In order to test the current atomic_check hooks we need to have a DRM device that has roughly the same capabilities and layout that the actual hardware. We'll also need a bunch of functions to create arbitrary atomic states. Let's create some helpers to create a device that behaves like the real one, and some helpers to maintain the atomic state we want to check. Reviewed-by:
-
Maxime Ripard authored
We'll need to initialize the HVS structure without a backing device to create a mock we'll use for testing. Split the structure initialization part into a separate function. Reviewed-by:
-
Maxime Ripard authored
We'll need a function that looks up an encoder by its vc4_encoder_type. Such a function is already present in the CRTC code, so let's make it public so that we can reuse it in the unit tests. Reviewed-by:
-
Maxime Ripard authored
The current vc4_crtc_init() helper assumes that we will be using hardware planes and calls vc4_plane_init(). While it's a reasonable assumption, we'll want to mock the plane and thus provide our own. Let's create a helper that will take the plane as an argument. Reviewed-by:
-
Maxime Ripard authored
In order to introduce unit tests for the HVS state computation, we'll need access to the vc4_hvs_state struct definition and its associated helpers. Let's move them in our driver header. Reviewed-by:
-
Maxime Ripard authored
DRM-managed actions are supposed to be ran whenever the device is released. Let's introduce a basic unit test to make sure it happens. Reviewed-by:
-
Maxime Ripard authored
Some tests will need to provide their own drm_driver instead of relying on the dumb one in the helpers, so let's create a helper that allows to do so. Reviewed-by:
-
Maxime Ripard authored
The current helper to allocate a DRM device doesn't allow for any subclassing by drivers, which is going to be troublesome as we work on getting some kunit testing on atomic modesetting code. Let's use a similar pattern to the other allocation helpers by providing the structure size and offset as arguments. Reviewed-by:
-
