- 14 Oct, 2016 6 commits
-
-
Vadim Fedorenko authored
The commit ea3dc960 ("ip6_tunnel: Add support for wildcard tunnel endpoints.") introduces support for wildcards in tunnels endpoints, but in some rare circumstances ip6_tnl_lookup selects wrong tunnel interface relying only on source or destination address of the packet and not checking presence of wildcard in tunnels endpoints. Later in ip6_tnl_rcv this packets can be dicarded because of difference in ipproto even if fallback device have proper ipproto configuration. This patch adds checks of wildcard endpoint in tunnel avoiding such behavior Fixes: ea3dc960 ("ip6_tunnel: Add support for wildcard tunnel endpoints.") Signed-off-by: Vadim Fedorenko <junk@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix various build warnings in tlan/qed/xen-netback drivers, from Arnd Bergmann. 2) Propagate proper error code in strparser's strp_recv(), from Geert Uytterhoeven. 3) Fix accidental broadcast of RTM_GETTFILTER responses, from Eric Dumazret. 4) Need to use list_for_each_entry_safe() in qed driver, from Wei Yongjun. 5) Openvswitch 802.1AD bug fixes from Jiri Benc. 6) Cure BUILD_BUG_ON() in mlx5 driver, from Tom Herbert. 7) Fix UDP ipv6 checksumming in netvsc driver, from Stephen Hemminger. 8) stmmac driver fixes from Giuseppe CAVALLARO. 9) Fix access to mangled IP6CB in tcp, from Eric Dumazet. 10) Fix info leaks in tipc and rtnetlink, from Dan Carpenter. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) net: bridge: add the multicast_flood flag attribute to brport_attrs net: axienet: Remove unused parameter from __axienet_device_reset liquidio: CN23XX: fix a loop timeout net: rtnl: info leak in rtnl_fill_vfinfo() tipc: info leak in __tipc_nl_add_udp_addr() net: ipv4: Do not drop to make_route if oif is l3mdev net: phy: Trigger state machine on state change and not polling. ipv6: tcp: restore IP6CB for pktoptions skbs netvsc: Remove mistaken udp.h inclusion. xen-netback: fix type mismatch warning stmmac: fix error check when init ptp stmmac: fix ptp init for gmac4 qed: fix old-style function definition netvsc: fix checksum on UDP IPV6 net_sched: reorder pernet ops and act ops registrations xen-netback: fix guest Rx stall detection (after guest Rx refactor) drivers/ptp: Fix kernel memory disclosure net/mlx5: Add MLX5_ARRAY_SET64 to fix BUILD_BUG_ON qmi_wwan: add support for Quectel EC21 and EC25 openvswitch: add NETIF_F_HW_VLAN_STAG_TX to internal dev ...
-
git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds authored
Pull NFS client updates from Anna Schumaker: "Highlights include: Stable bugfixes: - sunrpc: fix writ espace race causing stalls - NFS: Fix inode corruption in nfs_prime_dcache() - NFSv4: Don't report revoked delegations as valid in nfs_have_delegation() - NFSv4: nfs4_copy_delegation_stateid() must fail if the delegation is invalid - NFSv4: Open state recovery must account for file permission changes - NFSv4.2: Fix a reference leak in nfs42_proc_layoutstats_generic Features: - Add support for tracking multiple layout types with an ordered list - Add support for using multiple backchannel threads on the client - Add support for pNFS file layout session trunking - Delay xprtrdma use of DMA API (for device driver removal) - Add support for xprtrdma remote invalidation - Add support for larger xprtrdma inline thresholds - Use a scatter/gather list for sending xprtrdma RPC calls - Add support for the CB_NOTIFY_LOCK callback - Improve hashing sunrpc auth_creds by using both uid and gid Bugfixes: - Fix xprtrdma use of DMA API - Validate filenames before adding to the dcache - Fix corruption of xdr->nwords in xdr_copy_to_scratch - Fix setting buffer length in xdr_set_next_buffer() - Don't deadlock the state manager on the SEQUENCE status flags - Various delegation and stateid related fixes - Retry operations if an interrupted slot receives EREMOTEIO - Make nfs boot time y2038 safe" * tag 'nfs-for-4.9-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (100 commits) NFSv4.2: Fix a reference leak in nfs42_proc_layoutstats_generic fs: nfs: Make nfs boot time y2038 safe sunrpc: replace generic auth_cred hash with auth-specific function sunrpc: add RPCSEC_GSS hash_cred() function sunrpc: add auth_unix hash_cred() function sunrpc: add generic_auth hash_cred() function sunrpc: add hash_cred() function to rpc_authops struct Retry operation on EREMOTEIO on an interrupted slot pNFS: Fix atime updates on pNFS clients sunrpc: queue work on system_power_efficient_wq NFSv4.1: Even if the stateid is OK, we may need to recover the open modes NFSv4: If recovery failed for a specific open stateid, then don't retry NFSv4: Fix retry issues with nfs41_test/free_stateid NFSv4: Open state recovery must account for file permission changes NFSv4: Mark the lock and open stateids as invalid after freeing them NFSv4: Don't test open_stateid unless it is set NFSv4: nfs4_do_handle_exception() handle revoke/expiry of a single stateid NFS: Always call nfs_inode_find_state_and_recover() when revoking a delegation NFSv4: Fix a race when updating an open_stateid NFSv4: Fix a race in nfs_inode_reclaim_delegation() ...
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd updates from Bruce Fields: "Some RDMA work and some good bugfixes, and two new features that could benefit from user testing: - Anna Schumacker contributed a simple NFSv4.2 COPY implementation. COPY is already supported on the client side, so a call to copy_file_range() on a recent client should now result in a server-side copy that doesn't require all the data to make a round trip to the client and back. - Jeff Layton implemented callbacks to notify clients when contended locks become available, which should reduce latency on workloads with contended locks" * tag 'nfsd-4.9' of git://linux-nfs.org/~bfields/linux: NFSD: Implement the COPY call nfsd: handle EUCLEAN nfsd: only WARN once on unmapped errors exportfs: be careful to only return expected errors. nfsd4: setclientid_confirm with unmatched verifier should fail nfsd: randomize SETCLIENTID reply to help distinguish servers nfsd: set the MAY_NOTIFY_LOCK flag in OPEN replies nfs: add a new NFS4_OPEN_RESULT_MAY_NOTIFY_LOCK constant nfsd: add a LRU list for blocked locks nfsd: have nfsd4_lock use blocking locks for v4.1+ locks nfsd: plumb in a CB_NOTIFY_LOCK operation NFSD: fix corruption in notifier registration svcrdma: support Remote Invalidation svcrdma: Server-side support for rpcrdma_connect_private rpcrdma: RDMA/CM private message data structure svcrdma: Skip put_page() when send_reply() fails svcrdma: Tail iovec leaves an orphaned DMA mapping nfsd: fix dprintk in nfsd4_encode_getdeviceinfo nfsd: eliminate cb_minorversion field nfsd: don't set a FL_LAYOUT lease for flexfiles layouts
-
Linus Torvalds authored
Merge tag 'xfs-reflink-for-linus-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs < XFS has gained super CoW powers! > ---------------------------------- \ ^__^ \ (oo)\_______ (__)\ )\/\ ||----w | || || Pull XFS support for shared data extents from Dave Chinner: "This is the second part of the XFS updates for this merge cycle. This pullreq contains the new shared data extents feature for XFS. Given the complexity and size of this change I am expecting - like the addition of reverse mapping last cycle - that there will be some follow-up bug fixes and cleanups around the -rc3 stage for issues that I'm sure will show up once the code hits a wider userbase. What it is: At the most basic level we are simply adding shared data extents to XFS - i.e. a single extent on disk can now have multiple owners. To do this we have to add new on-disk features to both track the shared extents and the number of times they've been shared. This is done by the new "refcount" btree that sits in every allocation group. When we share or unshare an extent, this tree gets updated. Along with this new tree, the reverse mapping tree needs to be updated to track each owner or a shared extent. This also needs to be updated ever share/unshare operation. These interactions at extent allocation and freeing time have complex ordering and recovery constraints, so there's a significant amount of new intent-based transaction code to ensure that operations are performed atomically from both the runtime and integrity/crash recovery perspectives. We also need to break sharing when writes hit a shared extent - this is where the new copy-on-write implementation comes in. We allocate new storage and copy the original data along with the overwrite data into the new location. We only do this for data as we don't share metadata at all - each inode has it's own metadata that tracks the shared data extents, the extents undergoing CoW and it's own private extents. Of course, being XFS, nothing is simple - we use delayed allocation for CoW similar to how we use it for normal writes. ENOSPC is a significant issue here - we build on the reservation code added in 4.8-rc1 with the reverse mapping feature to ensure we don't get spurious ENOSPC issues part way through a CoW operation. These mechanisms also help minimise fragmentation due to repeated CoW operations. To further reduce fragmentation overhead, we've also introduced a CoW extent size hint, which indicates how large a region we should allocate when we execute a CoW operation. With all this functionality in place, we can hook up .copy_file_range, .clone_file_range and .dedupe_file_range and we gain all the capabilities of reflink and other vfs provided functionality that enable manipulation to shared extents. We also added a fallocate mode that explicitly unshares a range of a file, which we implemented as an explicit CoW of all the shared extents in a file. As such, it's a huge chunk of new functionality with new on-disk format features and internal infrastructure. It warns at mount time as an experimental feature and that it may eat data (as we do with all new on-disk features until they stabilise). We have not released userspace suport for it yet - userspace support currently requires download from Darrick's xfsprogs repo and build from source, so the access to this feature is really developer/tester only at this point. Initial userspace support will be released at the same time the kernel with this code in it is released. The new code causes 5-6 new failures with xfstests - these aren't serious functional failures but things the output of tests changing slightly due to perturbations in layouts, space usage, etc. OTOH, we've added 150+ new tests to xfstests that specifically exercise this new functionality so it's got far better test coverage than any functionality we've previously added to XFS. Darrick has done a pretty amazing job getting us to this stage, and special mention also needs to go to Christoph (review, testing, improvements and bug fixes) and Brian (caught several intricate bugs during review) for the effort they've also put in. Summary: - unshare range (FALLOC_FL_UNSHARE) support for fallocate - copy-on-write extent size hints (FS_XFLAG_COWEXTSIZE) for fsxattr interface - shared extent support for XFS - copy-on-write support for shared extents - copy_file_range support - clone_file_range support (implements reflink) - dedupe_file_range support - defrag support for reverse mapping enabled filesystems" * tag 'xfs-reflink-for-linus-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (71 commits) xfs: convert COW blocks to real blocks before unwritten extent conversion xfs: rework refcount cow recovery error handling xfs: clear reflink flag if setting realtime flag xfs: fix error initialization xfs: fix label inaccuracies xfs: remove isize check from unshare operation xfs: reduce stack usage of _reflink_clear_inode_flag xfs: check inode reflink flag before calling reflink functions xfs: implement swapext for rmap filesystems xfs: refactor swapext code xfs: various swapext cleanups xfs: recognize the reflink feature bit xfs: simulate per-AG reservations being critically low xfs: don't mix reflink and DAX mode for now xfs: check for invalid inode reflink flags xfs: set a default CoW extent size of 32 blocks xfs: convert unwritten status of reverse mappings for shared files xfs: use interval query for rmap alloc operations on shared files xfs: add shared rmap map/unmap/convert log item types xfs: increase log reservations for reflink ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
PCI changes for the v4.9 merge window: "Here are some more changes I'd like to have in v4.9. There's one small Tegra bug fix in the PHY poweroff path, which is only used in failure paths. The rest is all strictly cleanup that should make host bridge drivers more readable, but shouldn't actually change any behavior. Summary: - use local struct device pointers in many host bridge drivers for clarity - remove unused platform data - use generic DesignWare accessors - misc cleanups: remove redundant structure entries and re-order structure members to put comon generic fields first etc" * tag 'pci-v4.9-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (108 commits) MAINTAINERS: Add maintainer for the PCIe Marvell Armada 8K driver MAINTAINERS: Add DT binding to the Aardvark PCIe driver maintainer PCI: rockchip: Indent "if" statement body PCI: hisi: Reorder struct hisi_pcie PCI: hisi: Pass device-specific struct to internal functions PCI: hisi: Include register block base in PCIE_SYS_STATE4 address PCI: dra7xx: Reorder struct dra7xx_pcie PCI: xilinx-nwl: Remove unused platform data PCI: xilinx-nwl: Add local struct device pointers PCI: xilinx: Removed unused xilinx_pcie_assign_msi() argument PCI: xilinx: Remove unused platform data PCI: xilinx: Add local struct device pointers PCI: xgene: Add register accessors PCI: xgene: Pass struct xgene_pcie_port to setup functions PCI: xgene: Remove unused platform data PCI: tegra: Remove unused platform data PCI: tegra: Add local struct device pointers PCI: tegra: Fix argument order in tegra_pcie_phy_disable() PCI: rockchip: Remove unused platform data PCI: rcar-gen2: Add local struct device pointers ...
-
- 13 Oct, 2016 29 commits
-
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v4.9-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform drivers updates from Darren Hart: "Cleanups, refactoring, and a couple bug fixes. intel_pmc_core: - avoid boot time warning for !CONFIG_DEBUGFS_FS intel_pmc_ipc: - Convert to use platform_device_register_full asus-wmi: - Filter buggy scan codes on ASUS Q500A toshiba_bluetooth: - Decouple an error checking status code toshiba_haps: - Change logging level from info to debug - Split ACPI and HDD protection error handling asus-laptop: - get rid of parse_arg() asus-wmi: - fix asus ux303ub brightness issue toshiba_acpi: - Fix typo in *_cooling_method_set function - Change error checking logic from TCI functions - Clean up variable declaration" * tag 'platform-drivers-x86-v4.9-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: platform/x86: intel_pmc_core: avoid boot time warning for !CONFIG_DEBUGFS_FS platform/x86: intel_pmc_ipc: Convert to use platform_device_register_full platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A platform/x86: toshiba_bluetooth: Decouple an error checking status code platform/x86: toshiba_haps: Change logging level from info to debug platform/x86: toshiba_haps: Split ACPI and HDD protection error handling platform/x86: asus-laptop: get rid of parse_arg() platform/x86: asus-wmi: fix asus ux303ub brightness issue platform/x86: toshiba_acpi: Fix typo in *_cooling_method_set function platform/x86: toshiba_acpi: Change error checking logic from TCI functions platform/x86: toshiba_acpi: Clean up variable declaration
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog updates from Wim Van Sebroeck: - a new watchdog pretimeout governor framework - support to upload the firmware on the ziirave_wdt - several fixes and cleanups * git://www.linux-watchdog.org/linux-watchdog: (26 commits) watchdog: imx2_wdt: add pretimeout function support watchdog: softdog: implement pretimeout support watchdog: pretimeout: add pretimeout_available_governors attribute watchdog: pretimeout: add option to select a pretimeout governor in runtime watchdog: pretimeout: add panic pretimeout governor watchdog: pretimeout: add noop pretimeout governor watchdog: add watchdog pretimeout governor framework watchdog: hpwdt: add support for iLO5 fs: compat_ioctl: add pretimeout functions for watchdogs watchdog: add pretimeout support to the core watchdog: imx2_wdt: use preferred BIT macro instead of open coded values watchdog: st_wdt: Remove support for obsolete platforms watchdog: bindings: Remove obsolete platforms from dt doc. watchdog: mt7621_wdt: Remove assignment of dev pointer watchdog: rt2880_wdt: Remove assignment of dev pointer watchdog: constify watchdog_ops structures watchdog: tegra: constify watchdog_ops structures watchdog: iTCO_wdt: constify iTCO_wdt_pm structure watchdog: cadence_wdt: Fix the suspend resume watchdog: txx9wdt: Add missing clock (un)prepare calls for CCF ...
-
Nikolay Aleksandrov authored
When I added the multicast flood control flag, I also added an attribute for it for sysfs similar to other flags, but I forgot to add it to brport_attrs. Fixes: b6cb5ac8 ("net: bridge: add per-port multicast flood flag") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tobias Klauser authored
The dev parameter passed to __axienet_device_reset() is not used inside the function, so remove it. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
This is supposed to loop 1000 times and then give up. The problem is it's a post-op and after the loop we test if "loop" is zero when really it would be -1. Fix this by making it a pre-op. Fixes: 1b7c55c4 ("liquidio: CN23XX queue manipulation") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The "vf_vlan_info" struct ends with a 2 byte struct hole so we have to memset it to ensure that no stack information is revealed to user space. Fixes: 79aab093 ('net: Update API for VF vlan protocol 802.1ad support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
We should clear out the padding and unused struct members so that we don't expose stack information to userspace. Fixes: fdb3accc ('tipc: add the ability to get UDP options via netlink') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Commit e0d56fdd was a bit aggressive removing l3mdev calls in the IPv4 stack. If the fib_lookup fails we do not want to drop to make_route if the oif is an l3mdev device. Also reverts 19664c6a ("net: l3mdev: Remove netif_index_is_l3_master") which removed netif_index_is_l3_master. Fixes: e0d56fdd ("net: l3mdev: remove redundant calls") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
The phy_start() is used to indicate the PHY is now ready to do its work. The state is changed, normally to PHY_UP which means that both the MAC and the PHY are ready. If the phy driver is using polling, when the next poll happens, the state machine notices the PHY is now in PHY_UP, and kicks off auto-negotiation, if needed. If however, the PHY is using interrupts, there is no polling. The phy is stuck in PHY_UP until the next interrupt comes along. And there is no reason for the PHY to interrupt. Have phy_start() schedule the state machine to run, which both speeds up the polling use case, and makes the interrupt use case actually work. This problems exists whenever there is a state change which will not cause an interrupt. Trigger the state machine in these cases, e.g. phy_error(). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: Kyle Roeschley <kyle.roeschley@ni.com> Tested-by: Kyle Roeschley <kyle.roeschley@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Baozeng Ding reported following KASAN splat : BUG: KASAN: use-after-free in ip6_datagram_recv_specific_ctl+0x13f1/0x15c0 at addr ffff880029c84ec8 Read of size 1 by task poc/25548 Call Trace: [<ffffffff82cf43c9>] dump_stack+0x12e/0x185 /lib/dump_stack.c:15 [< inline >] print_address_description /mm/kasan/report.c:204 [<ffffffff817ced3b>] kasan_report_error+0x48b/0x4b0 /mm/kasan/report.c:283 [< inline >] kasan_report /mm/kasan/report.c:303 [<ffffffff817ced9e>] __asan_report_load1_noabort+0x3e/0x40 /mm/kasan/report.c:321 [<ffffffff85c71da1>] ip6_datagram_recv_specific_ctl+0x13f1/0x15c0 /net/ipv6/datagram.c:687 [<ffffffff85c734c3>] ip6_datagram_recv_ctl+0x33/0x40 [<ffffffff85c0b07c>] do_ipv6_getsockopt.isra.4+0xaec/0x2150 [<ffffffff85c0c7f6>] ipv6_getsockopt+0x116/0x230 [<ffffffff859b5a12>] tcp_getsockopt+0x82/0xd0 /net/ipv4/tcp.c:3035 [<ffffffff855fb385>] sock_common_getsockopt+0x95/0xd0 /net/core/sock.c:2647 [< inline >] SYSC_getsockopt /net/socket.c:1776 [<ffffffff855f8ba2>] SyS_getsockopt+0x142/0x230 /net/socket.c:1758 [<ffffffff8685cdc5>] entry_SYSCALL_64_fastpath+0x23/0xc6 Memory state around the buggy address: ffff880029c84d80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880029c84e00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ffff880029c84e80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff880029c84f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880029c84f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff He also provided a syzkaller reproducer. Issue is that ip6_datagram_recv_specific_ctl() expects to find IP6CB data that was moved at a different place in tcp_v6_rcv() This patch moves tcp_v6_restore_cb() up and calls it from tcp_v6_do_rcv() when np->pktoptions is set. Fixes: 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Baozeng Ding <sploving1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Based upon v2 of Stephen's patch. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
Wiht the latest rework of the xen-netback driver, we get a warning on ARM about the types passed into min(): drivers/net/xen-netback/rx.c: In function 'xenvif_rx_next_chunk': include/linux/kernel.h:739:16: error: comparison of distinct pointer types lacks a cast [-Werror] The reason is that XEN_PAGE_SIZE is not size_t here. There is no actual bug, and we can easily avoid the warning using the min_t() macro instead of min(). Fixes: eb1723a2 ("xen-netback: refactor guest rx") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Giuseppe CAVALLARO authored
This patch fixes a problem when propagated the failure of ptp_clock_register to open function. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Cc: Rayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Giuseppe CAVALLARO authored
The gmac 4.x version has not extended descriptors (that are available on 3.x instead of). While initializing the PTP module, the advanced PTP was enabled in case of extended descriptors. This cannot be applied for 4.x version where only the hardware capability register has to show if the feature is present. Patch also adds some extra netdev_(debug/inof) to better dump the configuration. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Cc: Rayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
The definition of qed_get_rdma_ops() is not a prototype unless we add 'void' here, as indicated by this W=1 warning: drivers/net/ethernet/qlogic/qed/qed_roce.c: In function ‘qed_get_rdma_ops’: drivers/net/ethernet/qlogic/qed/qed_roce.c:2950:28: error: old-style function definition [-Werror=old-style-definition] Fixes: abd49676 ("qed: Add RoCE ll2 & GSI support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
The software calculation of UDP checksum in Netvsc driver was only handling IPv4 case. By using skb_checksum_help() instead all protocols can be handled. Rearrange code to eliminate goto and look like other drivers. This is a temporary solution; recent versions of Window Server etc do support UDP checksum offload, just need to do the appropriate negotiation with host to validate before using. This will be done in later patch. Please queue this for -stable as well. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
WANG Cong authored
Krister reported a kernel NULL pointer dereference after tcf_action_init_1() invokes a_o->init(), it is a race condition where one thread calling tcf_register_action() to initialize the netns data after putting act ops in the global list and the other thread searching the list and then calling a_o->init(net, ...). Fix this by moving the pernet ops registration before making the action ops visible. This is fine because: a) we don't rely on act_base in pernet ops->init(), b) in the worst case we have a fully initialized netns but ops is still not ready so new actions still can't be created. Reported-by: Krister Johansen <kjlx@templeofstupid.com> Tested-by: Krister Johansen <kjlx@templeofstupid.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Vrabel authored
If a VIF has been ready for rx_stall_timeout (60s by default) and an Rx ring is drained of all requests an Rx stall will be incorrectly detected. When this occurs and the guest Rx queue is empty, the Rx ring's event index will not be set and the frontend will not raise an event when new requests are placed on the ring, permanently stalling the VIF. This is a regression introduced by eb1723a2 (xen-netback: refactor guest rx). Fix this by reinstating the setting of queue->last_rx_time when placing a packet onto the guest Rx ring. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Tsyrklevich authored
The reserved field precise_offset->rsv is not cleared before being copied to user space, leaking kernel stack memory. Clear the struct before it's copied. Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
I am hitting this in mlx5: drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c: In function reclaim_pages_cmd.clone.0: drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:346: error: call to __compiletime_assert_346 declared with attribute error: BUILD_BUG_ON failed: __mlx5_bit_off(manage_pages_out, pas[i]) % 64 drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c: In function give_pages: drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:291: error: call to __compiletime_assert_291 declared with attribute error: BUILD_BUG_ON failed: __mlx5_bit_off(manage_pages_in, pas[i]) % 64 Problem is that this is doing a BUILD_BUG_ON on a non-constant expression because of trying to take offset of pas[i] in the structure. Fix is to create MLX5_ARRAY_SET64 that takes an additional argument that is the field index to separate between BUILD_BUG_ON on the array constant field and the indexed field to assign the value to. There are two callers of MLX5_SET64 that are trying to get a variable offset, change those to call MLX5_ARRAY_SET64 passing 'pas' and 'i' as the arguments to use in the offset check and the indexed value assignment. Fixes: a533ed5e ("net/mlx5: Pages management commands via mlx5 ifc") Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bjørn Mork authored
The Quectel EC21 and EC25 need the same "set DTR" request as devices based on the MDM9230 chipset, but has no USB3 support. Our best guess is that the "set DTR" functionality depends on chipset and/or baseband firmware generation. But USB3 is still an optional feature. Since we cannot enable this unconditionally for all older devices, and there doesn't appear to be anything we can use in the USB descriptors to identify these chips, we are forced to use a device specific quirk flag. Reported-and-tested-by: Sebastian Sjoholm <sebastian.sjoholm@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Benc says: ==================== openvswitch: vlan fixes Fix three issues introduced by the 802.1AD patchset. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
The internal device does support 802.1AD offloading since 018c1dda ("openvswitch: 802.1AD Flow handling, actions, vlan parsing, netlink attributes"). Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: Eric Garver <e@erig.me> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
When the packet has its vlan tag in skb->vlan_tci, the length of the VLAN header is not counted in skb->len. It doesn't make sense to subtract it. Fixes: 018c1dda ("openvswitch: 802.1AD Flow handling, actions, vlan parsing, netlink attributes") Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: Eric Garver <e@erig.me> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
This code is called whenever flow key is being extracted from the packet. The packet may be as likely vlan tagged as not. Fixes: 018c1dda ("openvswitch: 802.1AD Flow handling, actions, vlan parsing, netlink attributes") Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: Eric Garver <e@erig.me> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Since we will remove items off the list using list_del() we need to use a safe version of the list_for_each_entry() macro aptly named list_for_each_entry_safe(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
While build testing with randconfig on x86, I ran into this warning that appears to have been around forever drivers/net/ethernet/ti/tlan.c: In function ‘tlan_probe1’: drivers/net/ethernet/ti/tlan.c:614:1: error: label ‘err_out’ defined but not used [-Werror=unused-label] This can be trivially avoided by just moving the label into the existing #ifdef. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Durrant authored
It is useful to be able to see the hash configuration when running tests. This patch adds a debugfs node for that purpose. The original version of this patch (commit c0c64c15) was reverted due to build failures caused by a conflict with commit 0364a882 ("xen-netback: switch to threaded irq for control ring"). This new version of the patch is nearly identical to the original, the only difference being that creation of the debugfs node is predicated on 'ctrl_irq' being non-zero rather then the now non-existent 'ctrl_task'. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
There are two ways to get tc filters from kernel to user space. 1) Full dump (tc_dump_tfilter()) 2) RTM_GETTFILTER to get one precise filter, reducing overhead. The second operation is unfortunately broadcasting its result, polluting "tc monitor" users. This patch makes sure only the requester gets the result, using netlink_unicast() instead of rtnetlink_send() Jamal cooked an iproute2 patch to implement "tc filter get" operation, but other user space libraries already use RTM_GETTFILTER when a single filter is queried, instead of dumping all filters. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 12 Oct, 2016 5 commits
-
-
Linus Torvalds authored
Merge tag 'pwm/for-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set of changes contains support for PWM signal capture in the STi driver as well as support for the PWM controller found on Meson SoCs. There's also support added for the MediaTek MT2701 and SunXi H3 to the existing drivers. Other than that there's a fair set of miscellaneous cleanups and fixes across the board" * tag 'pwm/for-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (24 commits) pwm: meson: Handle unknown ID values pwm: sti: Take the opportunity to conduct a little house keeping pwm: sti: It's now valid for number of PWM channels to be zero pwm: sti: Add PWM capture callback pwm: sti: Add support for PWM capture interrupts pwm: sti: Initialise PWM capture device data pwm: sti: Supply PWM Capture clock handling pwm: sti: Supply PWM capture register addresses and bit locations pwm: sti: Only request clock rate when needed pwm: sti: Reorganise register names in preparation for new functionality pwm: sti: Rename channel => device dt-bindings: pwm: sti: Update DT bindings for capture support pwm: lpc-18xx: use pwm_set_chip_data pwm: sunxi: Add H3 support pwm: Add support for Meson PWM Controller dt-bindings: pwm: Add bindings for Meson PWM Controller pwm: samsung: Fix to use lowest div for large enough modulation bits pwm: pwm-tipwmss: Remove all runtime PM gets/puts pwm: cros-ec: Add __packed to prevent padding pwm: Add MediaTek MT2701 display PWM driver support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds authored
Pull thermal managament updates from Zhang Rui: - Enhance thermal "userspace" governor to export the reason when a thermal event is triggered and delivered to user space. From Srinivas Pandruvada - Introduce a single TSENS thermal driver for the different versions of the TSENS IP that exist, on different qcom msm/apq SoCs'. Support for msm8916, msm8960, msm8974 and msm8996 families is also added. From Rajendra Nayak - Introduce hardware-tracked trip points support to the device tree thermal sensor framework. The framework supports an arbitrary number of trip points. Whenever the current temperature is changed, the trip points immediately below and above the current temperature are found, driver callback is invoked to program the hardware to get notified when either of the two trip points are triggered. Hardware-tracked trip points support for rockchip thermal driver is also added at the same time. From Sascha Hauer, Caesar Wang - Introduce a new thermal driver, which enables TMU (Thermal Monitor Unit) on QorIQ platform. From Jia Hongtao - Introduce a new thermal driver for Maxim MAX77620. From Laxman Dewangan - Introduce a new thermal driver for Intel platforms using WhiskeyCove PMIC. From Bin Gao - Add mt2701 chip support to MTK thermal driver. From Dawei Chien - Enhance Tegra thermal driver to enable soctherm node and set "critical", "hot" trips, for Tegra124, Tegra132, Tegra210. From Wei Ni - Add resume support for tango thermal driver. From Marc Gonzalez - several small fixes and improvements for rockchip, qcom, imx, rcar, mtk thermal drivers and thermal core code. From Caesar Wang, Keerthy, Rocky Hao, Wei Yongjun, Peter Robinson, Bui Duc Phuc, Axel Lin, Hugh Kang * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (48 commits) thermal: int3403: Process trip change notification thermal: int340x: New Interface to read trip and notify thermal: user_space gov: Add additional information in uevent thermal: Enhance thermal_zone_device_update for events arm64: tegra: set hot trips for Tegra210 arm64: tegra: set critical trips for Tegra210 arm64: tegra: add soctherm node for Tegra210 arm64: tegra: set hot trips for Tegra132 arm64: tegra: set critical trips for Tegra132 arm64: tegra: use tegra132-soctherm for Tegra132 arm: tegra: set hot trips for Tegra124 arm: tegra: set critical trips for Tegra124 thermal: tegra: add hw-throttle for Tegra132 thermal: tegra: add hw-throttle function of: Add bindings of hw throttle for Tegra soctherm thermal: mtk_thermal: Check return value of devm_thermal_zone_of_sensor_register thermal: Add Mediatek thermal driver for mt2701. dt-bindings: thermal: Add binding document for Mediatek thermal controller thermal: max77620: Add thermal driver for reporting junction temp thermal: max77620: Add DT binding doc for thermal driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linuxLinus Torvalds authored
Pull fbdev updates from Tomi Valkeinen: "Main changes: - amba-cldc: DT backlight support, Nomadik support, Versatile improvements, fixes - efifb: fix fbcon RGB565 palette - exynos: remove unused DSI driver" * tag 'fbdev-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (42 commits) video: smscufx: remove unused variable matroxfb: fix size of memcpy fbdev: ssd1307fb: fix a possible NULL dereference fbdev: ssd1307fb: constify the device_info pointer simplefb: Disable and release clocks and regulators in destroy callback video: fbdev: constify fb_fix_screeninfo and fb_var_screeninfo structures matroxfb: constify local structures video: fbdev: i810: add in missing white space in error message text video: fbdev: add missing \n at end of printk error message ARM: exynos_defconfig: Remove old non-working MIPI driver video: fbdev: exynos: Remove old non-working MIPI driver omapfb: fix return value check in dsi_bind() MAINTAINERS: update fbdev entries video: fbdev: offb: Call pci_enable_device() before using the PCI VGA device fbdev: vfb: simplify memory management fbdev: vfb: add option for video mode fbdev: vfb: add description to module parameters video: fbdev: intelfb: remove impossible condition fb: adv7393: off by one in probe function video: fbdev: pxafb: add missing of_node_put() in of_get_pxafb_mode_info() ...
-
Linus Torvalds authored
This affectively reverts commit 377ccbb4 ("Makefile: Mute warning for __builtin_return_address(>0) for tracing only") because it turns out that it really isn't tracing only - it's all over the tree. We already also had the warning disabled separately for mm/usercopy.c (which this commit also removes), and it turns out that we will also want to disable it for get_lock_parent_ip(), that is used for at least TRACE_IRQFLAGS. Which (when enabled) ends up being all over the tree. Steven Rostedt had a patch that tried to limit it to just the config options that actually triggered this, but quite frankly, the extra complexity and abstraction just isn't worth it. We have never actually had a case where the warning is actually useful, so let's just disable it globally and not worry about it. Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Bjorn Helgaas authored
Merge branches 'pci/host-armada', 'pci/host-artpec', 'pci/host-dra7xx', 'pci/host-exynos', 'pci/host-hisi', 'pci/host-imx6', 'pci/host-keystone', 'pci/host-layerscape', 'pci/host-qcom' and 'pci/host-spear' into next * pci/host-armada: MAINTAINERS: Add maintainer for the PCIe Marvell Armada 8K driver PCI: armada: Reorder struct armada8k_pcie PCI: armada: Pass device-specific struct to internal functions PCI: armada: Use generic DesignWare accessors PCI: armada: Remove redundant struct armada8k_pcie.base PCI: armada: Add local base pointer PCI: armada: Remove unused platform data * pci/host-artpec: PCI: artpec6: Add resource name comments PCI: artpec6: Pass device-specific struct to internal functions PCI: artpec6: Remove unnecessary artpec6_pcie_link_up() PCI: artpec6: Use generic DesignWare accessors PCI: artpec6: Add register accessors PCI: artpec6: Remove unused platform data PCI: artpec6: Add local struct device pointers * pci/host-dra7xx: PCI: dra7xx: Reorder struct dra7xx_pcie PCI: dra7xx: Move struct pcie_port setup to probe function PCI: dra7xx: Pass device-specific struct to internal functions PCI: dra7xx: Use generic DesignWare accessors PCI: dra7xx: Set drvdata at end of probe function PCI: dra7xx: Remove redundant struct device pointer from dra7xx_pcie PCI: dra7xx: Add local struct device pointers * pci/host-exynos: PCI: exynos: Reorder struct exynos_pcie PCI: exynos: Pass device-specific struct to internal functions PCI: exynos: Name private struct pointer "exynos_pcie" consistently PCI: exynos: Uninline register accessors PCI: exynos: Add local struct device pointers * pci/host-hisi: PCI: hisi: Reorder struct hisi_pcie PCI: hisi: Pass device-specific struct to internal functions PCI: hisi: Include register block base in PCIE_SYS_STATE4 address PCI: hisi: Use generic DesignWare accessors PCI: hisi: Remove redundant struct hisi_pcie.reg_base PCI: hisi: Name private struct pointer "hisi_pcie" consistently PCI: hisi: Remove unused platform data PCI: hisi: Add local struct device pointers * pci/host-imx6: PCI: imx6: Remove unused return values PCI: imx6: Reorder struct imx6_pcie PCI: imx6: Use generic DesignWare accessors PCI: imx6: Pass device-specific struct to internal functions PCI: imx6: Pass struct imx6_pcie to PHY accessors PCI: imx6: Removed unused struct imx6_pcie.mem_base PCI: imx6: Remove redundant of_node pointer PCI: imx6: Add local struct device pointers * pci/host-keystone: PCI: keystone: Reorder struct keystone_pcie PCI: keystone: Add app register accessors PCI: keystone: Pass keystone_pcie, not va_app_base, to DBI functions PCI: keystone: Pass keystone_pcie, not address, to IRQ functions PCI: keystone: Use generic DesignWare accessors PCI: keystone: Add local struct device pointers * pci/host-layerscape: PCI: layerscape: Reorder struct ls_pcie PCI: layerscape: Remove unused ls_add_pcie_port() platform_device arg PCI: layerscape: Move struct pcie_port setup to probe function PCI: layerscape: Pass device-specific struct to internal functions PCI: layerscape: Remove redundant struct ls_pcie.dbi PCI: layerscape: Remove unused platform data PCI: layerscape: Add local struct device pointers * pci/host-qcom: PCI: qcom: Reorder struct qcom_pcie PCI: qcom: Remove redundant struct qcom_pcie.dev PCI: qcom: Remove redundant struct qcom_pcie.dbi PCI: qcom: Remove unused platform data * pci/host-spear: PCI: spear: Clean up struct device usage PCI: spear: Reorder struct spear13xx_pcie PCI: spear: Pass device-specific struct to internal functions PCI: spear: Remove unused constants
-