1. 24 Apr, 2019 12 commits
    • Coly Li's avatar
      bcache: return error immediately in bch_journal_replay() · 68d10e69
      Coly Li authored
      When failure happens inside bch_journal_replay(), calling
      cache_set_err_on() and handling the failure in async way is not a good
      idea. Because after bch_journal_replay() returns, registering code will
      continue to execute following steps, and unregistering code triggered
      by cache_set_err_on() is running in same time. First it is unnecessary
      to handle failure and unregister cache set in an async way, second there
      might be potential race condition to run register and unregister code
      for same cache set.
      
      So in this patch, if failure happens in bch_journal_replay(), we don't
      call cache_set_err_on(), and just print out the same error message to
      kernel message buffer, then return -EIO immediately caller. Then caller
      can detect such failure and handle it in synchrnozied way.
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Reviewed-by: default avatarHannes Reinecke <hare@suse.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      68d10e69
    • Coly Li's avatar
      bcache: add comments for kobj release callback routine · 2d17456e
      Coly Li authored
      Bcache has several routines to release resources in implicit way, they
      are called when the associated kobj released. This patch adds code
      comments to notice when and which release callback will be called,
      - When dc->disk.kobj released:
        void bch_cached_dev_release(struct kobject *kobj)
      - When d->kobj released:
        void bch_flash_dev_release(struct kobject *kobj)
      - When c->kobj released:
        void bch_cache_set_release(struct kobject *kobj)
      - When ca->kobj released
        void bch_cache_release(struct kobject *kobj)
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Reviewed-by: default avatarChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
      Reviewed-by: default avatarHannes Reinecke <hare@suse.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      2d17456e
    • Coly Li's avatar
      bcache: add failure check to run_cache_set() for journal replay · ce3e4cfb
      Coly Li authored
      Currently run_cache_set() has no return value, if there is failure in
      bch_journal_replay(), the caller of run_cache_set() has no idea about
      such failure and just continue to execute following code after
      run_cache_set().  The internal failure is triggered inside
      bch_journal_replay() and being handled in async way. This behavior is
      inefficient, while failure handling inside bch_journal_replay(), cache
      register code is still running to start the cache set. Registering and
      unregistering code running as same time may introduce some rare race
      condition, and make the code to be more hard to be understood.
      
      This patch adds return value to run_cache_set(), and returns -EIO if
      bch_journal_rreplay() fails. Then caller of run_cache_set() may detect
      such failure and stop registering code flow immedidately inside
      register_cache_set().
      
      If journal replay fails, run_cache_set() can report error immediately
      to register_cache_set(). This patch makes the failure handling for
      bch_journal_replay() be in synchronized way, easier to understand and
      debug, and avoid poetential race condition for register-and-unregister
      in same time.
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      ce3e4cfb
    • Coly Li's avatar
      bcache: never set KEY_PTRS of journal key to 0 in journal_reclaim() · 1bee2add
      Coly Li authored
      In journal_reclaim() ja->cur_idx of each cache will be update to
      reclaim available journal buckets. Variable 'int n' is used to count how
      many cache is successfully reclaimed, then n is set to c->journal.key
      by SET_KEY_PTRS(). Later in journal_write_unlocked(), a for_each_cache()
      loop will write the jset data onto each cache.
      
      The problem is, if all jouranl buckets on each cache is full, the
      following code in journal_reclaim(),
      
      529 for_each_cache(ca, c, iter) {
      530       struct journal_device *ja = &ca->journal;
      531       unsigned int next = (ja->cur_idx + 1) % ca->sb.njournal_buckets;
      532
      533       /* No space available on this device */
      534       if (next == ja->discard_idx)
      535               continue;
      536
      537       ja->cur_idx = next;
      538       k->ptr[n++] = MAKE_PTR(0,
      539                         bucket_to_sector(c, ca->sb.d[ja->cur_idx]),
      540                         ca->sb.nr_this_dev);
      541 }
      542
      543 bkey_init(k);
      544 SET_KEY_PTRS(k, n);
      
      If there is no available bucket to reclaim, the if() condition at line
      534 will always true, and n remains 0. Then at line 544, SET_KEY_PTRS()
      will set KEY_PTRS field of c->journal.key to 0.
      
      Setting KEY_PTRS field of c->journal.key to 0 is wrong. Because in
      journal_write_unlocked() the journal data is written in following loop,
      
      649	for (i = 0; i < KEY_PTRS(k); i++) {
      650-671		submit journal data to cache device
      672	}
      
      If KEY_PTRS field is set to 0 in jouranl_reclaim(), the journal data
      won't be written to cache device here. If system crahed or rebooted
      before bkeys of the lost journal entries written into btree nodes, data
      corruption will be reported during bcache reload after rebooting the
      system.
      
      Indeed there is only one cache in a cache set, there is no need to set
      KEY_PTRS field in journal_reclaim() at all. But in order to keep the
      for_each_cache() logic consistent for now, this patch fixes the above
      problem by not setting 0 KEY_PTRS of journal key, if there is no bucket
      available to reclaim.
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Reviewed-by: default avatarHannes Reinecke <hare@suse.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      1bee2add
    • Coly Li's avatar
      bcache: move definition of 'int ret' out of macro read_bucket() · 14215ee0
      Coly Li authored
      'int ret' is defined as a local variable inside macro read_bucket().
      Since this macro is called multiple times, and following patches will
      use a 'int ret' variable in bch_journal_read(), this patch moves
      definition of 'int ret' from macro read_bucket() to range of function
      bch_journal_read().
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Reviewed-by: default avatarHannes Reinecke <hare@suse.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      14215ee0
    • Liang Chen's avatar
      bcache: fix a race between cache register and cacheset unregister · a4b732a2
      Liang Chen authored
      There is a race between cache device register and cache set unregister.
      For an already registered cache device, register_bcache will call
      bch_is_open to iterate through all cachesets and check every cache
      there. The race occurs if cache_set_free executes at the same time and
      clears the caches right before ca is dereferenced in bch_is_open_cache.
      To close the race, let's make sure the clean up work is protected by
      the bch_register_lock as well.
      
      This issue can be reproduced as follows,
      while true; do echo /dev/XXX> /sys/fs/bcache/register ; done&
      while true; do echo 1> /sys/block/XXX/bcache/set/unregister ; done &
      
      and results in the following oops,
      
      [  +0.000053] BUG: unable to handle kernel NULL pointer dereference at 0000000000000998
      [  +0.000457] #PF error: [normal kernel read fault]
      [  +0.000464] PGD 800000003ca9d067 P4D 800000003ca9d067 PUD 3ca9c067 PMD 0
      [  +0.000388] Oops: 0000 [#1] SMP PTI
      [  +0.000269] CPU: 1 PID: 3266 Comm: bash Not tainted 5.0.0+ #6
      [  +0.000346] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.fc28 04/01/2014
      [  +0.000472] RIP: 0010:register_bcache+0x1829/0x1990 [bcache]
      [  +0.000344] Code: b0 48 83 e8 50 48 81 fa e0 e1 10 c0 0f 84 a9 00 00 00 48 89 c6 48 89 ca 0f b7 ba 54 04 00 00 4c 8b 82 60 0c 00 00 85 ff 74 2f <49> 3b a8 98 09 00 00 74 4e 44 8d 47 ff 31 ff 49 c1 e0 03 eb 0d
      [  +0.000839] RSP: 0018:ffff92ee804cbd88 EFLAGS: 00010202
      [  +0.000328] RAX: ffffffffc010e190 RBX: ffff918b5c6b5000 RCX: ffff918b7d8e0000
      [  +0.000399] RDX: ffff918b7d8e0000 RSI: ffffffffc010e190 RDI: 0000000000000001
      [  +0.000398] RBP: ffff918b7d318340 R08: 0000000000000000 R09: ffffffffb9bd2d7a
      [  +0.000385] R10: ffff918b7eb253c0 R11: ffffb95980f51200 R12: ffffffffc010e1a0
      [  +0.000411] R13: fffffffffffffff2 R14: 000000000000000b R15: ffff918b7e232620
      [  +0.000384] FS:  00007f955bec2740(0000) GS:ffff918b7eb00000(0000) knlGS:0000000000000000
      [  +0.000420] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [  +0.000801] CR2: 0000000000000998 CR3: 000000003cad6000 CR4: 00000000001406e0
      [  +0.000837] Call Trace:
      [  +0.000682]  ? _cond_resched+0x10/0x20
      [  +0.000691]  ? __kmalloc+0x131/0x1b0
      [  +0.000710]  kernfs_fop_write+0xfa/0x170
      [  +0.000733]  __vfs_write+0x2e/0x190
      [  +0.000688]  ? inode_security+0x10/0x30
      [  +0.000698]  ? selinux_file_permission+0xd2/0x120
      [  +0.000752]  ? security_file_permission+0x2b/0x100
      [  +0.000753]  vfs_write+0xa8/0x1a0
      [  +0.000676]  ksys_write+0x4d/0xb0
      [  +0.000699]  do_syscall_64+0x3a/0xf0
      [  +0.000692]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
      Signed-off-by: default avatarLiang Chen <liangchen.linux@gmail.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      a4b732a2
    • George Spelvin's avatar
      bcache: Clean up bch_get_congested() · 3a394727
      George Spelvin authored
      There are a few nits in this function.  They could in theory all
      be separate patches, but that's probably taking small commits
      too far.
      
      1) I added a brief comment saying what it does.
      
      2) I like to declare pointer parameters "const" where possible
         for documentation reasons.
      
      3) It uses bitmap_weight(&rand, BITS_PER_LONG) to compute the Hamming
      weight of a 32-bit random number (giving a random integer with
      mean 16 and variance 8).  Passing by reference in a 64-bit variable
      is silly; just use hweight32().
      
      4) Its helper function fract_exp_two is unnecessarily tangled.
      Gcc can optimize the multiply by (1 << x) to a shift, but it can
      be written in a much more straightforward way at the cost of one
      more bit of internal precision.  Some analysis reveals that this
      bit is always available.
      
      This shrinks the object code for fract_exp_two(x, 6) from 23 bytes:
      
      0000000000000000 <foo1>:
         0:   89 f9                   mov    %edi,%ecx
         2:   c1 e9 06                shr    $0x6,%ecx
         5:   b8 01 00 00 00          mov    $0x1,%eax
         a:   d3 e0                   shl    %cl,%eax
         c:   83 e7 3f                and    $0x3f,%edi
         f:   d3 e7                   shl    %cl,%edi
        11:   c1 ef 06                shr    $0x6,%edi
        14:   01 f8                   add    %edi,%eax
        16:   c3                      retq
      
      To 19:
      
      0000000000000017 <foo2>:
        17:   89 f8                   mov    %edi,%eax
        19:   83 e0 3f                and    $0x3f,%eax
        1c:   83 c0 40                add    $0x40,%eax
        1f:   89 f9                   mov    %edi,%ecx
        21:   c1 e9 06                shr    $0x6,%ecx
        24:   d3 e0                   shl    %cl,%eax
        26:   c1 e8 06                shr    $0x6,%eax
        29:   c3                      retq
      
      (Verified with 0 <= frac_bits <= 8, 0 <= x < 16<<frac_bits;
      both versions produce the same output.)
      
      5) And finally, the call to bch_get_congested() in check_should_bypass()
      is separated from the use of the value by multiple tests which
      could moot the need to compute it.  Move the computation down to
      where it's needed.  This also saves a local register to hold the
      computed value.
      Signed-off-by: default avatarGeorge Spelvin <lkml@sdf.org>
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      3a394727
    • Geliang Tang's avatar
      bcache: use kmemdup_nul for CACHED_LABEL buffer · 792732d9
      Geliang Tang authored
      This patch uses kmemdup_nul to create a NUL-terminated string from
      dc->sb.label. This is better than open coding it.
      
      With this, we can move env[2] initialization into env[] array to make
      code more elegant.
      Signed-off-by: default avatarGeliang Tang <geliangtang@gmail.com>
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      792732d9
    • Arnd Bergmann's avatar
      bcache: avoid clang -Wunintialized warning · 78d4eb8a
      Arnd Bergmann authored
      clang has identified a code path in which it thinks a
      variable may be unused:
      
      drivers/md/bcache/alloc.c:333:4: error: variable 'bucket' is used uninitialized whenever 'if' condition is false
            [-Werror,-Wsometimes-uninitialized]
                              fifo_pop(&ca->free_inc, bucket);
                              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      drivers/md/bcache/util.h:219:27: note: expanded from macro 'fifo_pop'
       #define fifo_pop(fifo, i)       fifo_pop_front(fifo, (i))
                                      ^~~~~~~~~~~~~~~~~~~~~~~~~
      drivers/md/bcache/util.h:189:6: note: expanded from macro 'fifo_pop_front'
              if (_r) {                                                       \
                  ^~
      drivers/md/bcache/alloc.c:343:46: note: uninitialized use occurs here
                              allocator_wait(ca, bch_allocator_push(ca, bucket));
                                                                        ^~~~~~
      drivers/md/bcache/alloc.c:287:7: note: expanded from macro 'allocator_wait'
                      if (cond)                                               \
                          ^~~~
      drivers/md/bcache/alloc.c:333:4: note: remove the 'if' if its condition is always true
                              fifo_pop(&ca->free_inc, bucket);
                              ^
      drivers/md/bcache/util.h:219:27: note: expanded from macro 'fifo_pop'
       #define fifo_pop(fifo, i)       fifo_pop_front(fifo, (i))
                                      ^
      drivers/md/bcache/util.h:189:2: note: expanded from macro 'fifo_pop_front'
              if (_r) {                                                       \
              ^
      drivers/md/bcache/alloc.c:331:15: note: initialize the variable 'bucket' to silence this warning
                              long bucket;
                                         ^
      
      This cannot happen in practice because we only enter the loop
      if there is at least one element in the list.
      
      Slightly rearranging the code makes this clearer to both the
      reader and the compiler, which avoids the warning.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Reviewed-by: default avatarNathan Chancellor <natechancellor@gmail.com>
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      78d4eb8a
    • Guoju Fang's avatar
      bcache: fix inaccurate result of unused buckets · 4e0c04ec
      Guoju Fang authored
      To get the amount of unused buckets in sysfs_priority_stats, the code
      count the buckets which GC_SECTORS_USED is zero. It's correct and should
      not be overwritten by the count of buckets which prio is zero.
      Signed-off-by: default avatarGuoju Fang <fangguoju@gmail.com>
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      4e0c04ec
    • Guoju Fang's avatar
      bcache: fix crashes stopping bcache device before read miss done · 1568ee7e
      Guoju Fang authored
      The bio from upper layer is considered completed when bio_complete()
      returns. In most scenarios bio_complete() is called in search_free(),
      but when read miss happens, the bio_compete() is called when backing
      device reading completed, while the struct search is still in use until
      cache inserting finished.
      
      If someone stops the bcache device just then, the device may be closed
      and released, but after cache inserting finished the struct search will
      access a freed struct cached_dev.
      
      This patch add the reference of bcache device before bio_complete() when
      read miss happens, and put it after the search is not used.
      Signed-off-by: default avatarGuoju Fang <fangguoju@gmail.com>
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      1568ee7e
    • Ming Lei's avatar
      block: don't run get_page() on pages from non-bvec iov iter · 0257c0ed
      Ming Lei authored
      The refcount has been increased for pages retrieved from non-bvec iov iter
      via __bio_iov_iter_get_pages(), so don't need to do that again.
      
      Otherwise, IO pages are leaked easily.
      
      Cc: Christoph Hellwig <hch@lst.de>
      Reviewed-by: default avatarChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
      Fixes: 7321ecbf ("block: change how we get page references in bio_iov_iter_get_pages")
      Signed-off-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      0257c0ed
  2. 23 Apr, 2019 1 commit
  3. 22 Apr, 2019 6 commits
    • Jens Axboe's avatar
      Merge branch 'md-next' of https://github.com/liu-song-6/linux into for-5.2/block · 6c88d735
      Jens Axboe authored
      Pull MD fixes from Song.
      
      * 'md-next' of https://github.com/liu-song-6/linux:
        md/raid: raid5 preserve the writeback action after the parity check
        Revert "Don't jump to compute_result state from check_result state"
        md: return -ENODEV if rdev has no mddev assigned
        block: fix use-after-free on gendisk
      6c88d735
    • Weiping Zhang's avatar
      block: don't show io_timeout if driver has no timeout handler · 4d25339e
      Weiping Zhang authored
      If the low level driver has no timeout handler, the
      /sys/block/<disk>/queue/io_timeout will not be displayed.
      Reviewed-by: default avatarBart Van Assche <bvanassche@acm.org>
      Signed-off-by: default avatarWeiping Zhang <zhangweiping@didiglobal.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      4d25339e
    • Christoph Hellwig's avatar
      block: avoid scatterlist offsets > PAGE_SIZE · f9f76879
      Christoph Hellwig authored
      While we generally allow scatterlists to have offsets larger than page
      size for an entry, and other subsystems like the crypto code make use of
      that, the block layer isn't quite ready for that.  Flip the switch back
      to avoid them for now, and revisit that decision early in a merge window
      once the known offenders are fixed.
      
      Fixes: 8a96a0e4 ("block: rewrite blk_bvec_map_sg to avoid a nth_page call")
      Reviewed-by: default avatarMing Lei <ming.lei@redhat.com>
      Tested-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Reported-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      f9f76879
    • Hou Tao's avatar
      brd: re-enable __GFP_HIGHMEM in brd_insert_page() · f6b50160
      Hou Tao authored
      __GFP_HIGHMEM is disabled if dax is enabled on brd, however
      dax support for brd has been removed since commit (7a862fbb
      "brd: remove dax support"), so restore __GFP_HIGHMEM in
      brd_insert_page().
      
      Also remove the no longer applicable comments about DAX and highmem.
      
      Cc: stable@vger.kernel.org
      Fixes: 7a862fbb ("brd: remove dax support")
      Signed-off-by: default avatarHou Tao <houtao1@huawei.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      f6b50160
    • Yufen Yu's avatar
      block: fix use-after-free on gendisk · 6fcc44d1
      Yufen Yu authored
      commit 2da78092 "block: Fix dev_t minor allocation lifetime"
      specifically moved blk_free_devt(dev->devt) call to part_release()
      to avoid reallocating device number before the device is fully
      shutdown.
      
      However, it can cause use-after-free on gendisk in get_gendisk().
      We use md device as example to show the race scenes:
      
      Process1		Worker			Process2
      md_free
      						blkdev_open
      del_gendisk
        add delete_partition_work_fn() to wq
        						__blkdev_get
      						get_gendisk
      put_disk
        disk_release
          kfree(disk)
          						find part from ext_devt_idr
      						get_disk_and_module(disk)
          					  	cause use after free
      
          			delete_partition_work_fn
      			put_device(part)
          		  	part_release
      		    	remove part from ext_devt_idr
      
      Before <devt, hd_struct pointer> is removed from ext_devt_idr by
      delete_partition_work_fn(), we can find the devt and then access
      gendisk by hd_struct pointer. But, if we access the gendisk after
      it have been freed, it can cause in use-after-freeon gendisk in
      get_gendisk().
      
      We fix this by adding a new helper blk_invalidate_devt() in
      delete_partition() and del_gendisk(). It replaces hd_struct
      pointer in idr with value 'NULL', and deletes the entry from
      idr in part_release() as we do now.
      
      Thanks to Jan Kara for providing the solution and more clear comments
      for the code.
      
      Fixes: 2da78092 ("block: Fix dev_t minor allocation lifetime")
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Reviewed-by: default avatarBart Van Assche <bvanassche@acm.org>
      Reviewed-by: default avatarKeith Busch <keith.busch@intel.com>
      Reviewed-by: default avatarJan Kara <jack@suse.cz>
      Suggested-by: default avatarJan Kara <jack@suse.cz>
      Signed-off-by: default avatarYufen Yu <yuyufen@huawei.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      6fcc44d1
    • Jens Axboe's avatar
      Merge tag 'v5.1-rc6' into for-5.2/block · 5c61ee2c
      Jens Axboe authored
      Pull in v5.1-rc6 to resolve two conflicts. One is in BFQ, in just a
      comment, and is trivial. The other one is a conflict due to a later fix
      in the bio multi-page work, and needs a bit more care.
      
      * tag 'v5.1-rc6': (770 commits)
        Linux 5.1-rc6
        block: make sure that bvec length can't be overflow
        block: kill all_q_node in request_queue
        x86/cpu/intel: Lower the "ENERGY_PERF_BIAS: Set to normal" message's log priority
        coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping
        mm/kmemleak.c: fix unused-function warning
        init: initialize jump labels before command line option parsing
        kernel/watchdog_hld.c: hard lockup message should end with a newline
        kcov: improve CONFIG_ARCH_HAS_KCOV help text
        mm: fix inactive list balancing between NUMA nodes and cgroups
        mm/hotplug: treat CMA pages as unmovable
        proc: fixup proc-pid-vm test
        proc: fix map_files test on F29
        mm/vmstat.c: fix /proc/vmstat format for CONFIG_DEBUG_TLBFLUSH=y CONFIG_SMP=n
        mm/memory_hotplug: do not unlock after failing to take the device_hotplug_lock
        mm: swapoff: shmem_unuse() stop eviction without igrab()
        mm: swapoff: take notice of completion sooner
        mm: swapoff: remove too limiting SWAP_UNUSE_MAX_TRIES
        mm: swapoff: shmem_find_swap_entries() filter out other types
        slab: store tagged freelist for off-slab slabmgmt
        ...
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      5c61ee2c
  4. 21 Apr, 2019 1 commit
  5. 20 Apr, 2019 11 commits
  6. 19 Apr, 2019 9 commits
    • Linus Torvalds's avatar
      Merge branch 'for-5.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu · 4c3f49ae
      Linus Torvalds authored
      Pull percpu fixlet from Dennis Zhou:
       "This stops printing the base address of percpu memory on
        initialization"
      
      * 'for-5.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
        percpu: stop printing kernel addresses
      4c3f49ae
    • Linus Torvalds's avatar
      Merge tag 'tty-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty · 55e3a6ba
      Linus Torvalds authored
      Pull tty/serial fixes from Greg KH:
       "Here are five small fixes for some tty/serial/vt issues that have been
        reported.
      
        The vt one has been around for a while, it is good to finally get that
        resolved. The others fix a build warning that showed up in 5.1-rc1,
        and resolve a problem in the sh-sci driver.
      
        Note, the second patch for build warning fix for the sc16is7xx driver
        was just applied to the tree, as it resolves a problem with the
        previous patch to try to solve the issue. It has not shown up in
        linux-next yet, unlike all of the other patches, but it has passed
        0-day testing and everyone seems to agree that it is correct"
      
      * tag 'tty-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
        sc16is7xx: put err_spi and err_i2c into correct #ifdef
        vt: fix cursor when clearing the screen
        sc16is7xx: move label 'err_spi' to correct section
        serial: sh-sci: Fix HSCIF RX sampling point adjustment
        serial: sh-sci: Fix HSCIF RX sampling point calculation
      55e3a6ba
    • Linus Torvalds's avatar
      Merge branch 'akpm' (patches from Andrew) · 3ecafda9
      Linus Torvalds authored
      Merge misc fixes from Andrew Morton:
       "16 fixes"
      
      * emailed patches from Andrew Morton <akpm@linux-foundation.org>:
        coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping
        mm/kmemleak.c: fix unused-function warning
        init: initialize jump labels before command line option parsing
        kernel/watchdog_hld.c: hard lockup message should end with a newline
        kcov: improve CONFIG_ARCH_HAS_KCOV help text
        mm: fix inactive list balancing between NUMA nodes and cgroups
        mm/hotplug: treat CMA pages as unmovable
        proc: fixup proc-pid-vm test
        proc: fix map_files test on F29
        mm/vmstat.c: fix /proc/vmstat format for CONFIG_DEBUG_TLBFLUSH=y CONFIG_SMP=n
        mm/memory_hotplug: do not unlock after failing to take the device_hotplug_lock
        mm: swapoff: shmem_unuse() stop eviction without igrab()
        mm: swapoff: take notice of completion sooner
        mm: swapoff: remove too limiting SWAP_UNUSE_MAX_TRIES
        mm: swapoff: shmem_find_swap_entries() filter out other types
        slab: store tagged freelist for off-slab slabmgmt
      3ecafda9
    • Linus Torvalds's avatar
      Merge tag 'staging-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging · b222e9af
      Linus Torvalds authored
      Pull staging and IIO fixes from Greg KH:
       "Here is a bunch of IIO driver fixes, and some smaller staging driver
        fixes, for 5.1-rc6. The IIO fixes were delayed due to my vacation, but
        all resolve a number of reported issues and have been in linux-next
        for a few weeks with no reported issues.
      
        The other staging driver fixes are all tiny, resolving some reported
        issues in the comedi and most drivers, as well as some erofs fixes.
      
        All of these patches have been in linux-next with no reported issues"
      
      * tag 'staging-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (24 commits)
        staging: comedi: ni_usb6501: Fix possible double-free of ->usb_rx_buf
        staging: comedi: ni_usb6501: Fix use of uninitialized mutex
        staging: erofs: fix unexpected out-of-bound data access
        staging: comedi: vmk80xx: Fix possible double-free of ->usb_rx_buf
        staging: comedi: vmk80xx: Fix use of uninitialized semaphore
        staging: most: core: use device description as name
        iio: core: fix a possible circular locking dependency
        iio: ad_sigma_delta: select channel when reading register
        iio: pms7003: select IIO_TRIGGERED_BUFFER
        iio: cros_ec: Fix the maths for gyro scale calculation
        iio: adc: xilinx: prevent touching unclocked h/w on remove
        iio: adc: xilinx: fix potential use-after-free on probe
        iio: adc: xilinx: fix potential use-after-free on remove
        iio: dac: mcp4725: add missing powerdown bits in store eeprom
        io: accel: kxcjk1013: restore the range after resume.
        iio:chemical:bme680: Fix SPI read interface
        iio:chemical:bme680: Fix, report temperature in millidegrees
        iio: chemical: fix missing Kconfig block for sgp30
        iio: adc: at91: disable adc channel interrupt in timeout case
        iio: gyro: mpu3050: fix chip ID reading
        ...
      b222e9af
    • Linus Torvalds's avatar
      Merge tag 'char-misc-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc · f9764dd4
      Linus Torvalds authored
      Pull char/misc fixes from Greg KH:
       "Here are four small misc driver fixes for 5.1-rc6.
      
        Nothing major at all, they fix up a Kconfig issues, a SPDX invalid
        license tag, and two tiny bugfixes.
      
        All have been in linux-next for a while with no reported issues"
      
      * tag 'char-misc-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
        drivers: power: supply: goldfish_battery: Fix bogus SPDX identifier
        extcon: ptn5150: fix COMPILE_TEST dependencies
        misc: fastrpc: add checked value for dma_set_mask
        habanalabs: remove low credit limit of DMA #0
      f9764dd4
    • Ming Lei's avatar
      block: make sure that bvec length can't be overflow · 6bedf00e
      Ming Lei authored
      bvec->bv_offset may be bigger than PAGE_SIZE sometimes, such as,
      when one bio is splitted in the middle of one bvec via bio_split(),
      and bi_iter.bi_bvec_done is used to build offset of the 1st bvec of
      remained bio. And the remained bio's bvec may be re-submitted to fs
      layer via ITER_IBVEC, such as loop and nvme-loop.
      
      So we have to make sure that every bvec's offset is less than
      PAGE_SIZE from bio_for_each_segment_all() because some drivers(loop,
      nvme-loop) passes the splitted bvec to fs layer via ITER_BVEC.
      
      This patch fixes this issue reported by Zhang Yi When running nvme/011.
      
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: Yi Zhang <yi.zhang@redhat.com>
      Reported-by: default avatarYi Zhang <yi.zhang@redhat.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Fixes: 6dc4f100 ("block: allow bio_for_each_segment_all() to iterate over multi-page bvec")
      Signed-off-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      6bedf00e
    • Hou Tao's avatar
      block: kill all_q_node in request_queue · b40fabc0
      Hou Tao authored
      all_q_node has not been used since commit 4b855ad3 ("blk-mq: Create
      hctx for each present CPU"), so remove it.
      Reviewed-by: default avatarChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
      Reviewed-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarHou Tao <houtao1@huawei.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      b40fabc0
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input · 240206fc
      Linus Torvalds authored
      Pull input updates from Dmitry Torokhov:
      
       - several new key mappings for HID
      
       - a host of new ACPI IDs used to identify Elan touchpads in Lenovo
         laptops
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
        Input: snvs_pwrkey - initialize necessary driver data before enabling IRQ
        HID: input: add mapping for "Toggle Display" key
        HID: input: add mapping for "Full Screen" key
        HID: input: add mapping for keyboard Brightness Up/Down/Toggle keys
        HID: input: add mapping for Expose/Overview key
        HID: input: fix mapping of aspect ratio key
        [media] doc-rst: switch to new names for Full Screen/Aspect keys
        Input: document meanings of KEY_SCREEN and KEY_ZOOM
        Input: elan_i2c - add hardware ID for multiple Lenovo laptops
      240206fc
    • Hans de Goede's avatar
      x86/cpu/intel: Lower the "ENERGY_PERF_BIAS: Set to normal" message's log priority · 2ee27796
      Hans de Goede authored
      The "ENERGY_PERF_BIAS: Set to 'normal', was 'performance'" message triggers
      on pretty much every Intel machine. The purpose of log messages with
      a warning level is to notify the user of something which potentially is
      a problem, or at least somewhat unexpected.
      
      This message clearly does not match those criteria, so lower its log
      priority from warning to info.
      Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Link: http://lkml.kernel.org/r/20181230172715.17469-1-hdegoede@redhat.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
      2ee27796