Enabling 52-bit VAs for userspace is pretty confusing, since it requires
you to select "48-bit" virtual addressing in the Kconfig.

Rework the logic so that 52-bit user virtual addressing is advertised in
the "Virtual address space size" choice, along with some help text to
describe its interaction with Pointer Authentication. The EXPERT-only
option to force all user mappings to the 52-bit range is then made
available immediately below the VA size selection.
Signed-off-by: Will Deacon <will.deacon@arm.com>

On arm64 52-bit VAs are provided to userspace when a hint is supplied to
mmap. This helps maintain compatibility with software that expects at
most 48-bit VAs to be returned.

In order to help identify software that has 48-bit VA assumptions, this
patch allows one to compile a kernel where 52-bit VAs are returned by
default on HW that supports it.

This feature is intended to be for development systems only.
Signed-off-by: Steve Capper <steve.capper@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

On arm64 there is optional support for a 52-bit virtual address space.
To exploit this one has to be running with a 64KB page size and be
running on hardware that supports this.

For an arm64 kernel supporting a 48 bit VA with a 64KB page size,
some changes are needed to support a 52-bit userspace:
 * TCR_EL1.T0SZ needs to be 12 instead of 16,
 * TASK_SIZE needs to reflect the new size.

This patch implements the above when the support for 52-bit VAs is
detected at early boot time.

On arm64 userspace addresses translation is controlled by TTBR0_EL1. As
well as userspace, TTBR0_EL1 controls:
 * The identity mapping,
 * EFI runtime code.

It is possible to run a kernel with an identity mapping that has a
larger VA size than userspace (and for this case __cpu_set_tcr_t0sz()
would set TCR_EL1.T0SZ as appropriate). However, when the conditions for
52-bit userspace are met; it is possible to keep TCR_EL1.T0SZ fixed at
12. Thus in this patch, the TCR_EL1.T0SZ size changing logic is
disabled.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

For cases where there is a mismatch in ARMv8.2-LVA support between CPUs
we have to be careful in allowing secondary CPUs to boot if 52-bit
virtual addresses have already been enabled on the boot CPU.

This patch adds code to the secondary startup path. If the boot CPU has
enabled 52-bit VAs then ID_AA64MMFR2_EL1 is checked to see if the
secondary can also enable 52-bit support. If not, the secondary is
prevented from booting and an error message is displayed indicating why.

Technically this patch could be implemented using the cpufeature code
when considering 52-bit userspace support. However, we employ low level
checks here as the cpufeature code won't be able to run if we have
mismatched 52-bit kernel va support.
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Enabling 52-bit VAs on arm64 requires that the PGD table expands from 64
entries (for the 48-bit case) to 1024 entries. This quantity,
PTRS_PER_PGD is used as follows to compute which PGD entry corresponds
to a given virtual address, addr:

pgd_index(addr) -> (addr >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)

Userspace addresses are prefixed by 0's, so for a 48-bit userspace
address, uva, the following is true:
(uva >> PGDIR_SHIFT) & (1024 - 1) == (uva >> PGDIR_SHIFT) & (64 - 1)

In other words, a 48-bit userspace address will have the same pgd_index
when using PTRS_PER_PGD = 64 and 1024.

Kernel addresses are prefixed by 1's so, given a 48-bit kernel address,
kva, we have the following inequality:
(kva >> PGDIR_SHIFT) & (1024 - 1) != (kva >> PGDIR_SHIFT) & (64 - 1)

In other words a 48-bit kernel virtual address will have a different
pgd_index when using PTRS_PER_PGD = 64 and 1024.

If, however, we note that:
kva = 0xFFFF << 48 + lower (where lower[63:48] == 0b)
and, PGDIR_SHIFT = 42 (as we are dealing with 64KB PAGE_SIZE)

We can consider:
(kva >> PGDIR_SHIFT) & (1024 - 1) - (kva >> PGDIR_SHIFT) & (64 - 1)
 = (0xFFFF << 6) & 0x3FF - (0xFFFF << 6) & 0x3F	// "lower" cancels out
 = 0x3C0

In other words, one can switch PTRS_PER_PGD to the 52-bit value globally
provided that they increment ttbr1_el1 by 0x3C0 * 8 = 0x1E00 bytes when
running with 48-bit kernel VAs (TCR_EL1.T1SZ = 16).

For kernel configuration where 52-bit userspace VAs are possible, this
patch offsets ttbr1_el1 and sets PTRS_PER_PGD corresponding to the
52-bit value.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
[will: added comment to TTBR1_BADDR_4852_OFFSET calculation]
Signed-off-by: Will Deacon <will.deacon@arm.com>

Now that we have DEFAULT_MAP_WINDOW defined, we can arch_get_mmap_end
and arch_get_mmap_base helpers to allow for high addresses in mmap.
Signed-off-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

We wish to introduce a 52-bit virtual address space for userspace but
maintain compatibility with software that assumes the maximum VA space
size is 48 bit.

In order to achieve this, on 52-bit VA systems, we make mmap behave as
if it were running on a 48-bit VA system (unless userspace explicitly
requests a VA where addr[51:48] != 0).

On a system running a 52-bit userspace we need TASK_SIZE to represent
the 52-bit limit as it is used in various places to distinguish between
kernelspace and userspace addresses.

Thus we need a new limit for mmap, stack, ELF loader and EFI (which uses
TTBR0) to represent the non-extended VA space.

This patch introduces DEFAULT_MAP_WINDOW and DEFAULT_MAP_WINDOW_64 and
switches the appropriate logic to use that instead of TASK_SIZE.
Signed-off-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

This patch adds support for "high" userspace addresses that are
optionally supported on the system and have to be requested via a hint
mechanism ("high" addr parameter to mmap).

Architectures such as powerpc and x86 achieve this by making changes to
their architectural versions of arch_get_unmapped_* functions. However,
on arm64 we use the generic versions of these functions.

Rather than duplicate the generic arch_get_unmapped_* implementations
for arm64, this patch instead introduces two architectural helper macros
and applies them to arch_get_unmapped_*:
 arch_get_mmap_end(addr) - get mmap upper limit depending on addr hint
 arch_get_mmap_base(addr, base) - get mmap_base depending on addr hint

If these macros are not defined in architectural code then they default
to (TASK_SIZE) and (base) so should not introduce any behavioural
changes to architectures that do not define them.
Signed-off-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

If the kernel is configured with KASAN_EXTRA, the stack size is
increased significantly due to setting the GCC -fstack-reuse option to
"none" [1]. As a result, it can trigger a stack overrun quite often with
32k stack size compiled using GCC 8. For example, this reproducer

  https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/syscalls/madvise/madvise06.c

can trigger a "corrupted stack end detected inside scheduler" very
reliably with CONFIG_SCHED_STACK_END_CHECK enabled. There are other
reports at:

  https://lore.kernel.org/lkml/1542144497.12945.29.camel@gmx.us/
  https://lore.kernel.org/lkml/721E7B42-2D55-4866-9C1A-3E8D64F33F9C@gmx.us/

There are just too many functions that could have a large stack with
KASAN_EXTRA due to large local variables that have been called over and
over again without being able to reuse the stacks. Some noticiable ones
are,

size
7536 shrink_inactive_list
7440 shrink_page_list
6560 fscache_stats_show
3920 jbd2_journal_commit_transaction
3216 try_to_unmap_one
3072 migrate_page_move_mapping
3584 migrate_misplaced_transhuge_page
3920 ip_vs_lblcr_schedule
4304 lpfc_nvme_info_show
3888 lpfc_debugfs_nvmestat_data.constprop

There are other 49 functions over 2k in size while compiling kernel with
"-Wframe-larger-than=" on this machine. Hence, it is too much work to
change Makefiles for each object to compile without
-fsanitize-address-use-after-scope individually.

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715#c23Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Will Deacon <will.deacon@arm.com>

The dcache_by_line_op macro suffers from a couple of small problems:

First, the GAS directives that are currently being used rely on
assembler behavior that is not documented, and probably not guaranteed
to produce the correct behavior going forward. As a result, we end up
with some undefined symbols in cache.o:

$ nm arch/arm64/mm/cache.o
         ...
         U civac
         ...
         U cvac
         U cvap
         U cvau

This is due to the fact that the comparisons used to select the
operation type in the dcache_by_line_op macro are comparing symbols
not strings, and even though it seems that GAS is doing the right
thing here (undefined symbols by the same name are equal to each
other), it seems unwise to rely on this.

Second, when patching in a DC CVAP instruction on CPUs that support it,
the fallback path consists of a DC CVAU instruction which may be
affected by CPU errata that require ARM64_WORKAROUND_CLEAN_CACHE.

Solve these issues by unrolling the various maintenance routines and
using the conditional directives that are documented as operating on
strings. To avoid the complexity of nested alternatives, we move the
DC CVAP patching to __clean_dcache_area_pop, falling back to a branch
to __clean_dcache_area_poc if DCPOP is not supported by the CPU.
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Now that arm64ksyms.c has been reduced to a stub, let's remove it
entirely. New exports should be associated with their function
definition.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

For a while now it's been possible to use EXPORT_SYMBOL() in assembly
files, which allows us to place exports immediately after assembly
functions, as we do for C functions.

As a step towards removing arm64ksyms.c, let's move the ftrace exports
to the assembly files the functions are defined in.

There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

For a while now it's been possible to use EXPORT_SYMBOL() in assembly
files, which allows us to place exports immediately after assembly
functions, as we do for C functions.

As a step towards removing arm64ksyms.c, let's move the string routine
exports to the assembly files the functions are defined in. Routines
which should only be exported for !KASAN builds are exported using the
EXPORT_SYMBOL_NOKASAN() helper.

There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

For a while now it's been possible to use EXPORT_SYMBOL() in assembly
files, which allows us to place exports immediately after assembly
functions, as we do for C functions.

As a step towards removing arm64ksyms.c, let's move the uaccess exports
to the assembly files the functions are defined in.  As we have to
include <asm/assembler.h>, the existing includes are fixed to follow the
usual ordering conventions.

There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

For a while now it's been possible to use EXPORT_SYMBOL() in assembly
files, which allows us to place exports immediately after assembly
functions, as we do for C functions.

As a step towards removing arm64ksyms.c, let's move the copy_page and
clear_page exports to the assembly files the functions are defined in.

There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

For a while now it's been possible to use EXPORT_SYMBOL() in assembly
files, which allows us to place exports immediately after assembly
functions, as we do for C functions.

As a step towards removing arm64ksyms.c, let's move the SMCCC exports to
the assembly file the functions are defined in.

There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

For a while now it's been possible to use EXPORT_SYMBOL() in assembly
files, which allows us to place exports immediately after assembly
functions, as we do for C functions.

As a step towards removing arm64ksyms.c, let's move the tishift exports
to the assembly file the functions are defined in.

There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

So that we can export symbols directly from assembly files, let's make
use of the generic <asm/export.h>. We have a few symbols that we'll want
to conditionally export for !KASAN kernel builds, so we add a helper for
that in <asm/assembler.h>.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Since we define memstart_addr in a C file, we can have the export
immediately after the definition of the symbol, as we do elsewhere.

As a step towards removing arm64ksyms.c, move the export of
memstart_addr to init.c, where the symbol is defined.

There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Now that the arm64 bitops are inlines built atop of the regular atomics,
we don't need to export anything.

Remove the redundant exports.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

The "L" AArch64 machine constraint, which we use for the "old" value in
an LL/SC cmpxchg(), generates an immediate that is suitable for a 64-bit
logical instruction. However, for cmpxchg() operations on types smaller
than 64 bits, this constraint can result in an invalid instruction which
is correctly rejected by GAS, such as EOR W1, W1, #0xffffffff.

Whilst we could special-case the constraint based on the cmpxchg size,
it's far easier to change the constraint to "K" and put up with using
a register for large 64-bit immediates. For out-of-line LL/SC atomics,
this is all moot anyway.
Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Our percpu code is a bit of an inconsistent mess:

  * It rolls its own xchg(), but reuses cmpxchg_local()
  * It uses various different flavours of preempt_{enable,disable}()
  * It returns values even for the non-returning RmW operations
  * It makes no use of LSE atomics outside of the cmpxchg() ops
  * There are individual macros for different sizes of access, but these
    are all funneled through a switch statement rather than dispatched
    directly to the relevant case

This patch rewrites the per-cpu operations to address these shortcomings.
Whilst the new code is a lot cleaner, the big advantage is that we can
use the non-returning ST- atomic instructions when we have LSE.
Signed-off-by: Will Deacon <will.deacon@arm.com>

The CAS instructions implicitly access only the relevant bits of the "old"
argument, so there is no need for explicit masking via type-casting as
there is in the LL/SC implementation.

Move the casting into the LL/SC code and remove it altogether for the LSE
implementation.
Signed-off-by: Will Deacon <will.deacon@arm.com>

Our atomic instructions (either LSE atomics of LDXR/STXR sequences)
natively support byte, half-word, word and double-word memory accesses
so there is no need to mask the data register prior to being stored.
Signed-off-by: Will Deacon <will.deacon@arm.com>

The asm-generic/preempt.h implementation doesn't make use of the
PREEMPT_NEED_RESCHED flag, since this can interact badly with load/store
architectures which rely on the preempt_count word being unchanged across
an interrupt.

However, since we're a 64-bit architecture and the preempt count is
only 32 bits wide, we can simply pack it next to the resched flag and
load the whole thing in one go, so that a dec-and-test operation doesn't
need to load twice.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

PREEMPT_NEED_RESCHED is never used directly, so move it into the arch
code where it can potentially be implemented using either a different
bit in the preempt count or as an entirely separate entity.

Cc: Robert Love <rml@tech9.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Add hstate for each supported hugepage size using arch initcall.

* no hugepage parameters

  Without hugepage parameters, only a default hugepage size is
  available for dynamic allocation.  It's different, for example, from
  x86_64 and sparc64 where all supported hugepage sizes are available.

* only default_hugepagesz= is specified and set not to HPAGE_SIZE

  In spite of the fact that default_hugepagesz= is set to a valid
  hugepage size, it's treated as unsupported and reverted to
  HPAGE_SIZE.  Such behaviour is also different from x86_64 and
  sparc64.
Acked-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Dmitry Klochkov <dmitry.klochkov@oracle.com>
Signed-off-by: Allen Pais <allen.pais@oracle.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

This is a NEON acceleration method that can improve
performance by approximately 20%. I got the following
data from the centos 7.5 on Huawei's HISI1616 chip:

[ 93.837726] xor: measuring software checksum speed
[ 93.874039]   8regs  : 7123.200 MB/sec
[ 93.914038]   32regs : 7180.300 MB/sec
[ 93.954043]   arm64_neon: 9856.000 MB/sec
[ 93.954047] xor: using function: arm64_neon (9856.000 MB/sec)

I believe this code can bring some optimization for
all arm64 platform. thanks for Ard Biesheuvel's suggestions.
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

In a way similar to ARM commit 09096f6a ("ARM: 7822/1: add workaround
for ambiguous C99 stdint.h types"), this patch redefines the macros that
are used in stdint.h so its definitions of uint64_t and int64_t are
compatible with those of the kernel.

This patch comes from: https://patchwork.kernel.org/patch/3540001/
Wrote by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

We mark this file as a private file and don't have to override asm/types.h
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

The comment about SYS_MEMBARRIER_SYNC_CORE relying on ERET being
context-synchronizing is confusing and misplaced with kpti. Given that
this is already documented under Documentation/ (see arch-support.txt
for membarrier), remove the comment altogether.
Signed-off-by: Will Deacon <will.deacon@arm.com>

Some CPUs can speculate past an ERET instruction and potentially perform
speculative accesses to memory before processing the exception return.
Since the register state is often controlled by a lower privilege level
at the point of an ERET, this could potentially be used as part of a
side-channel attack.

This patch emits an SB sequence after each ERET so that speculation is
held up on exception return.
Signed-off-by: Will Deacon <will.deacon@arm.com>

We currently use a DSB; ISB sequence to inhibit speculation in set_fs().
Whilst this works for current CPUs, future CPUs may implement a new SB
barrier instruction which acts as an architected speculation barrier.

On CPUs that support it, patch in an SB; NOP sequence over the DSB; ISB
sequence and advertise the presence of the new instruction to userspace.
Signed-off-by: Will Deacon <will.deacon@arm.com>

We use a stop_machine call for each available capability to
enable it on all the CPUs available at boot time. Instead
we could batch the cpu_enable callbacks to a single stop_machine()
call to save us some time.
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Use the sorted list of capability entries for the detection and
verification.
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Make use of the sorted capability list to access the capability
entry in this_cpu_has_cap() to avoid iterating over the two
tables.
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

We maintain two separate tables of capabilities, errata and features,
which decide the system capabilities. We iterate over each of these
tables for various operations (e.g, detection, verification etc.).
We do not have a way to map a system "capability" to its entry,
(i.e, cap -> struct arm64_cpu_capabilities) which is needed for
this_cpu_has_cap(). So we iterate over the table one by one to
find the entry and then do the operation. Also, this prevents
us from optimizing the way we "enable" the capabilities on the
CPUs, where we now issue a stop_machine() for each available
capability.

One solution is to merge the two tables into a single table,
sorted by the capability. But this is has the following
disadvantages:
  - We loose the "classification" of an errata vs. feature
  - It is quite easy to make a mistake when adding an entry,
    unless we sort the table at runtime.

So we maintain a list of pointers to the capability entry, sorted
by the "cap number" in a separate array, initialized at boot time.
The only restriction is that we can have one "entry" per capability.
While at it, remove the duplicate declaration of arm64_errata table.
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Remove duplicate entries for Qualcomm erratum 1003. Since the entries
are not purely based on generic MIDR checks, use the multi_cap_entry
type to merge the entries.

Cc: Christopher Covington <cov@codeaurora.org>
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Merge duplicate entries for a single capability using the midr
range list for Cavium errata 30115 and 27456.

Cc: Andrew Pinski <apinski@cavium.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

We have two entries for ARM64_WORKAROUND_CLEAN_CACHE capability :

1) ARM Errata 826319, 827319, 824069, 819472 on A53 r0p[012]
2) ARM Errata 819472 on A53 r0p[01]

Both have the same work around. Merge these entries to avoid
duplicate entries for a single capability. Add a new Kconfig
entry to control the "capability" entry to make it easier
to handle combinations of the CONFIGs.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

readelf complains about the section layout of vmlinux when building
with CONFIG_RELOCATABLE=y (for KASLR):

  readelf: Warning: [21]: Link field (0) should index a symtab section.
  readelf: Warning: [21]: Info field (0) should index a relocatable section.

Also, it seems that our use of '-pie -shared' is contradictory, and
thus ambiguous. In general, the way KASLR is wired up at the moment
is highly tailored to how ld.bfd happens to implement (and conflate)
PIE executables and shared libraries, so given the current effort to
support other toolchains, let's fix some of these issues as well.

- Drop the -pie linker argument and just leave -shared. In ld.bfd,
  the differences between them are unclear (except for the ELF type
  of the produced image [0]) but lld chokes on seeing both at the
  same time.

- Rename the .rela output section to .rela.dyn, as is customary for
  shared libraries and PIE executables, so that it is not misidentified
  by readelf as a static relocation section (producing the warnings
  above).

- Pass the -z notext and -z norelro options to explicitly instruct the
  linker to permit text relocations, and to omit the RELRO program
  header (which requires a certain section layout that we don't adhere
  to in the kernel). These are the defaults for current versions of
  ld.bfd.

- Discard .eh_frame and .gnu.hash sections to avoid them from being
  emitted between .head.text and .text, screwing up the section layout.

These changes only affect the ELF image, and produce the same binary
image.

[0] b9dce7f1 ("arm64: kernel: force ET_DYN ELF type for ...")

Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Smith <peter.smith@linaro.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>