- 21 Nov, 2012 1 commit
-
-
Mats Petersson authored
This is a regression introduced by ceb90fa0 (xen/privcmd: add PRIVCMD_MMAPBATCH_V2 ioctl). It broke xentrace as it used xc_map_foreign() instead of xc_map_foreign_bulk(). Most code-paths prefer the MMAPBATCH_V2, so this wasn't very obvious that it broke. The return value is set early on to -EINVAL, and if all goes well, the "set top bits of the MFN's" never gets called, so the return value is still EINVAL when the function gets to the end, causing the caller to think it went wrong (which it didn't!) Now also including Andres "move the ret = -EINVAL into the error handling path, as this avoids other similar errors in future. Signed-off-by:
Mats Petersson <mats.petersson@citrix.com> Acked-by:
Andres Lagar-Cavilla <andres@lagarcavilla.org> Acked-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 09 Nov, 2012 1 commit
-
-
Stefano Stabellini authored
The commit 911dec0d "xen/arm: Fix compile errors when drivers are compiled as modules." exports the neccessary functions. But to guard ourselves against out-of-tree modules and future drivers hitting this, lets export all of the relevant hypercalls. Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
-
- 07 Nov, 2012 4 commits
-
-
Konrad Rzeszutek Wilk authored
We end up with: ERROR: "HYPERVISOR_event_channel_op" [drivers/xen/xen-gntdev.ko] undefined! ERROR: "privcmd_call" [drivers/xen/xen-privcmd.ko] undefined! ERROR: "HYPERVISOR_grant_table_op" [drivers/net/xen-netback/xen-netback.ko] undefined! and this patch exports said function (which is implemented in hypercall.S). Acked-by:
Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
As there is no need for it (the fallback code is for older hypervisors and they only run under x86), and also b/c we get: drivers/xen/fallback.c: In function 'xen_event_channel_op_compat': drivers/xen/fallback.c:10:19: error: storage size of 'op' isn't known drivers/xen/fallback.c:15:2: error: implicit declaration of function '_hypercall1' [-Werror=implicit-function-declaration] drivers/xen/fallback.c:15:19: error: expected expression before 'int' drivers/xen/fallback.c:18:7: error: 'EVTCHNOP_close' undeclared (first use in this function) drivers/xen/fallback.c:18:7: note: each undeclared identifier is reported only once for each function it appears in .. and more [v1: Moved the enablement to be covered by CONFIG_X86 per Ian's suggestion] Signed-off-by: -
Mojiong Qiu authored
exit_idle() should be called after irq_enter(), otherwise it throws: [ INFO: suspicious RCU usage. ] 3.6.5 #1 Not tainted ------------------------------- include/linux/rcupdate.h:725 rcu_read_lock() used illegally while idle! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 1 RCU used illegally from extended quiescent state! 1 lock held by swapper/0/0: #0: (rcu_read_lock){......}, at: [<ffffffff810e9fe0>] __atomic_notifier_call_chain+0x0/0x140 stack backtrace: Pid: 0, comm: swapper/0 Not tainted 3.6.5 #1 Call Trace: <IRQ> [<ffffffff811259a2>] lockdep_rcu_suspicious+0xe2/0x130 [<ffffffff810ea10c>] __atomic_notifier_call_chain+0x12c/0x140 [<ffffffff810e9fe0>] ? atomic_notifier_chain_unregister+0x90/0x90 [<ffffffff811216cd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff810ea136>] atomic_notifier_call_chain+0x16/0x20 [<ffffffff810777c3>] exit_idle+0x43/0x50 [<ffffffff81568865>] xen_evtchn_do_upcall+0x25/0x50 [<ffffffff81aa690e>] xen_do_hypervisor_callback+0x1e/0x30 <EOI> [<ffffffff810013aa>] ? hypercall_page+0x3aa/0x1000 [<ffffffff810013aa>] ? hypercall_page+0x3aa/0x1000 [<ffffffff81061540>] ? xen_safe_halt+0x10/0x20 [<ffffffff81075cfa>] ? default_idle+0xba/0x570 [<ffffffff810778af>] ? cpu_idle+0xdf/0x140 [<ffffffff81a4d881>] ? rest_init+0x135/0x144 [<ffffffff81a4d74c>] ? csum_partial_copy_generic+0x16c/0x16c [<ffffffff82520c45>] ? start_kernel+0x3db/0x3e8 [<ffffffff8252066a>] ? repair_env_string+0x5a/0x5a [<ffffffff82520356>] ? x86_64_start_reservations+0x131/0x135 [<ffffffff82524aca>] ? xen_start_kernel+0x465/0x46 Git commit 98ad1cc1 Author: Frederic Weisbecker <fweisbec@gmail.com> Date: Fri Oct 7 18:22:09 2011 +0200 x86: Call idle notifier after irq_enter() did this, but it missed the Xen code. Signed-off-by:Mojiong Qiu <mjqiu@tencent.com> Cc: stable@vger.kernel.org # from 3.3 and newer. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
Makes it easier to troubleshoot in the field. Acked-by:
-
- 04 Nov, 2012 1 commit
-
-
Jan Beulich authored
While copying the argument structures in HYPERVISOR_event_channel_op() and HYPERVISOR_physdev_op() into the local variable is sufficiently safe even if the actual structure is smaller than the container one, copying back eventual output values the same way isn't: This may collide with on-stack variables (particularly "rc") which may change between the first and second memcpy() (i.e. the second memcpy() could discard that change). Move the fallback code into out-of-line functions, and handle all of the operations known by this old a hypervisor individually: Some don't require copying back anything at all, and for the rest use the individual argument structures' sizes rather than the container's. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jan Beulich <jbeulich@suse.com> [v2: Reduce #define/#undef usage in HYPERVISOR_physdev_op_compat().] [v3: Fix compile errors when modules use said hypercalls] [v4: Add xen_ prefix to the HYPERCALL_..] [v5: Alter the name and only EXPORT_SYMBOL_GPL one of them] Signed-off-by:
-
- 31 Oct, 2012 1 commit
-
-
Konrad Rzeszutek Wilk authored
As Mukesh explained it, the MMUEXT_TLB_FLUSH_ALL allows the hypervisor to do a TLB flush on all active vCPUs. If instead we were using the generic one (which ends up being xen_flush_tlb) we end up making the MMUEXT_TLB_FLUSH_LOCAL hypercall. But before we make that hypercall the kernel will IPI all of the vCPUs (even those that were asleep from the hypervisor perspective). The end result is that we needlessly wake them up and do a TLB flush when we can just let the hypervisor do it correctly. This patch gives around 50% speed improvement when migrating idle guest's from one host to another. Oracle-bug: 14630170 CC: stable@vger.kernel.org Tested-by:
Jingjie Jiang <jingjie.jiang@oracle.com> Suggested-by:
Mukesh Rathor <mukesh.rathor@oracle.com> Signed-off-by:
-
- 30 Oct, 2012 6 commits
-
-
Stefano Stabellini authored
Use the new __HVC macro in hypercall.S. Signed-off-by:
-
Jan Beulich authored
Acked-by:
-
David Vrabel authored
Backend drivers shouldn't transistion to CLOSED unless the frontend is CLOSED. If a backend does transition to CLOSED too soon then the frontend may not see the CLOSING state and will not properly shutdown. So, treat an unexpected backend CLOSED state the same as CLOSING. Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
David Vrabel authored
Backend drivers shouldn't transistion to CLOSED unless the frontend is CLOSED. If a backend does transition to CLOSED too soon then the frontend may not see the CLOSING state and will not properly shutdown. So, treat an unexpected backend CLOSED state the same as CLOSING. Acked-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
David Vrabel authored
map->kmap_ops allocated in gntdev_alloc_map() wasn't freed by gntdev_put_map(). Add a gntdev_free_map() helper function to free everything allocated by gntdev_alloc_map(). Signed-off-by:
-
Olaf Hering authored
Signed-off-by:
Olaf Hering <olaf@aepfle.de> Signed-off-by:
-
- 19 Oct, 2012 16 commits
-
-
Ian Campbell authored
I saw this on ARM: linux/drivers/xen/dbgp.c:11:23: warning: unused variable 'ctrlr' [-Wunused-variable] Acked-by:
-
Konrad Rzeszutek Wilk authored
* commit 'v3.7-rc1': (10892 commits) Linux 3.7-rc1 x86, boot: Explicitly include autoconf.h for hostprogs perf: Fix UAPI fallout ARM: config: make sure that platforms are ordered by option string ARM: config: sort select statements alphanumerically UAPI: (Scripted) Disintegrate include/linux/byteorder UAPI: (Scripted) Disintegrate include/linux UAPI: Unexport linux/blk_types.h UAPI: Unexport part of linux/ppp-comp.h perf: Handle new rbtree implementation procfs: don't need a PATH_MAX allocation to hold a string representation of an int vfs: embed struct filename inside of names_cache allocation if possible audit: make audit_inode take struct filename vfs: make path_openat take a struct filename pointer vfs: turn do_path_lookup into wrapper around struct filename variant audit: allow audit code to satisfy getname requests from its names_list vfs: define struct filename and have getname() return it btrfs: Fix compilation with user namespace support enabled userns: Fix posix_acl_file_xattr_userns gid conversion userns: Properly print bluetooth socket uids ...
-
Ian Campbell authored
Signed-off-by:
-
Ian Campbell authored
This is now a xen_pfn_t. Signed-off-by:
-
David Vrabel authored
In 32 bit guests, if a userspace process has %eax == -ERESTARTSYS (-512) or -ERESTARTNOINTR (-513) when it is interrupted by an event /and/ the process has a pending signal then %eip (and %eax) are corrupted when returning to the main process after handling the signal. The application may then crash with SIGSEGV or a SIGILL or it may have subtly incorrect behaviour (depending on what instruction it returned to). The occurs because handle_signal() is incorrectly thinking that there is a system call that needs to restarted so it adjusts %eip and %eax to re-execute the system call instruction (even though user space had not done a system call). If %eax == -514 (-ERESTARTNOHAND (-514) or -ERESTART_RESTARTBLOCK (-516) then handle_signal() only corrupted %eax (by setting it to -EINTR). This may cause the application to crash or have incorrect behaviour. handle_signal() assumes that regs->orig_ax >= 0 means a system call so any kernel entry point that is not for a system call must push a negative value for orig_ax. For example, for physical interrupts on bare metal the inverse of the vector is pushed and page_fault() sets regs->orig_ax to -1, overwriting the hardware provided error code. xen_hypervisor_callback() was incorrectly pushing 0 for orig_ax instead of -1. Classic Xen kernels pushed %eax which works as %eax cannot be both non-negative and -RESTARTSYS (etc.), but using -1 is consistent with other non-system call entry points and avoids some of the tests in handle_signal(). There were similar bugs in xen_failsafe_callback() of both 32 and 64-bit guests. If the fault was corrected and the normal return path was used then 0 was incorrectly pushed as the value for orig_ax. Signed-off-by:
-
Ian Campbell authored
This makes common code less ifdef-y and is consistent with PVHVM on x86. Also note that phys_to_machine_mapping_valid should take a pfn argument and make it do so. Add __set_phys_to_machine, make set_phys_to_machine a simple wrapper (on systems with non-nop implementations the outer one can allocate new p2m pages). Make __set_phys_to_machine check for identity mapping or invalid only. Acked-by:
-
Ian Campbell authored
This breaks on !X86 and AFAICT is not required on X86 either. Acked-by:
-
Ian Campbell authored
This correctly sizes it as 64 bit on ARM but leaves it as unsigned long on x86 (therefore no intended change on x86). The long and ulong guest handles are now unused (and a bit dangerous) so remove them. Acked-by:
-
Ian Campbell authored
On ARM I see: drivers/xen/events.c:280:13: warning: 'pirq_check_eoi_map' defined but not used [-Wunused-function] Signed-off-by:
-
Ian Campbell authored
Signed-off-by:
-
Ian Campbell authored
Define PRI macros for xen_ulong_t and xen_pfn_t and use to fix: drivers/xen/sys-hypervisor.c:288:4: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'xen_ulong_t' [-Wformat] Ideally this would use PRIx64 on ARM but these (or equivalent) don't seem to be available in the kernel. Acked-by:
-
Ian Campbell authored
Fixes build error on ARM: drivers/xen/sys-hypervisor.c: In function 'uuid_show_fallback': drivers/xen/sys-hypervisor.c:127:2: error: implicit declaration of function 'IS_ERR' [-Werror=implicit-function-declaration] drivers/xen/sys-hypervisor.c:128:3: error: implicit declaration of function 'PTR_ERR' [-Werror=implicit-function-declaration] Acked-by:
-
Ian Campbell authored
This breaks on ARM. This quirk is not necessary on ARM because no hypervisors of that vintage exist for that architecture (port is too new). Signed-off-by:
-
Laszlo Ersek authored
VFs are reported as single-function devices in PCI_HEADER_TYPE, which causes pci_scan_slot() in the PV domU to skip all VFs beyond #0 in the pciback-provided slot. Avoid this by assigning each VF to a separate virtual slot. Acked-by:
Laszlo Ersek <lersek@redhat.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
We were missing the 'void' on the parameter arguments. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Wei Yongjun authored
Remove duplicated include. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) CC: stable@vger.kernel.org Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
- 14 Oct, 2012 6 commits
-
-
Linus Torvalds authored
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS update from Ralf Baechle: "Cleanups and fixes for breakage that occured earlier during this merge phase. Also a few patches that didn't make the first pull request. Of those is the Alchemy work that merges code for many of the SOCs and evaluation boards thus among other code shrinkage, reduces the number of MIPS defconfigs by 5." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (22 commits) MIPS: SNI: Switch RM400 serial to SCCNXP driver MIPS: Remove unused empty_bad_pmd_table[] declaration. MIPS: MT: Remove kspd. MIPS: Malta: Fix section mismatch. MIPS: asm-offset.c: Delete unused irq_cpustat_t struct offsets. MIPS: Alchemy: Merge PB1100/1500 support into DB1000 code. MIPS: Alchemy: merge PB1550 support into DB1550 code MIPS: Alchemy: Single kernel for DB1200/1300/1550 MIPS: Optimize TLB refill for RI/XI configurations. MIPS: proc: Cleanup printing of ASEs. MIPS: Hardwire detection of DSP ASE Rev 2 for systems, as required. MIPS: Add detection of DSP ASE Revision 2. MIPS: Optimize pgd_init and pmd_init MIPS: perf: Add perf functionality for BMIPS5000 MIPS: perf: Split the Kconfig option CONFIG_MIPS_MT_SMP MIPS: perf: Remove unnecessary #ifdef MIPS: perf: Add cpu feature bit for PCI (performance counter interrupt) MIPS: perf: Change the "mips_perf_event" table unsupported indicator. MIPS: Align swapper_pg_dir to 64K for better TLB Refill code. vmlinux.lds.h: Allow architectures to add sections to the front of .bss ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linuxLinus Torvalds authored
Pull module signing support from Rusty Russell: "module signing is the highlight, but it's an all-over David Howells frenzy..." Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG. * 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits) X.509: Fix indefinite length element skip error handling X.509: Convert some printk calls to pr_devel asymmetric keys: fix printk format warning MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking MODSIGN: Make mrproper should remove generated files. MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs MODSIGN: Use the same digest for the autogen key sig as for the module sig MODSIGN: Sign modules during the build process MODSIGN: Provide a script for generating a key ID from an X.509 cert MODSIGN: Implement module signature checking MODSIGN: Provide module signing public keys to the kernel MODSIGN: Automatically generate module signing keys if missing MODSIGN: Provide Kconfig options MODSIGN: Provide gitignore and make clean rules for extra files MODSIGN: Add FIPS policy module: signature checking hook X.509: Add a crypto key parser for binary (DER) X.509 certificates MPILIB: Provide a function to read raw data into an MPI X.509: Add an ASN.1 decoder X.509: Add simple ASN.1 grammar compiler ...
-
Matt Fleming authored
The hostprogs need access to the CONFIG_* symbols found in include/generated/autoconf.h. But commit abbf1590 ("UAPI: Partition the header include path sets and add uapi/ header directories") replaced $(LINUXINCLUDE) with $(USERINCLUDE) which doesn't contain the necessary include paths. This has the undesirable effect of breaking the EFI boot stub because the #ifdef CONFIG_EFI_STUB code in arch/x86/boot/tools/build.c is never compiled. It should also be noted that because $(USERINCLUDE) isn't exported by the top-level Makefile it's actually empty in arch/x86/boot/Makefile. Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Acked-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ingo Molnar authored
The UAPI commits forgot to test tooling builds such as tools/perf/, and this fixes the fallout. Manual conversion. Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM update from Russell King: "This is the final round of stuff for ARM, left until the end of the merge window to reduce the number of conflicts. This set contains the ARM part of David Howells UAPI changes, and a fix to the ordering of 'select' statements in ARM Kconfig files (see the appropriate commit for why this happened - thanks to Andrew Morton for pointing out the problem.) I've left this as long as I dare for this window to avoid conflicts, and I regenerated the config patch yesterday, posting it to our mailing list for review and testing. I have several acks which include successful test reports for it. However, today I notice we've got new conflicts with previously unseen code... though that conflict should be trivial (it's my changes vs a one liner.)" * 'late-for-linus' of git://git.linaro.org/people/rmk/linux-arm: ARM: config: make sure that platforms are ordered by option string ARM: config: sort select statements alphanumerically UAPI: (Scripted) Disintegrate arch/arm/include/asm Fix up fairly conflict in arch/arm/Kconfig (the select re-organization vs recent addition of GENERIC_KERNEL_EXECVE)
-
- 13 Oct, 2012 4 commits
-
-
git://git.infradead.org/users/dhowells/linux-headersLinus Torvalds authored
Pull UAPI disintegration for include/linux/{,byteorder/}*.h from David Howells: "The patches contained herein do the following: (1) Remove kernel-only stuff in linux/ppp-comp.h from the UAPI. I checked this with Paul Mackerras before I created the patch and he suggested some extra bits to unexport. (2) Remove linux/blk_types.h entirely from the UAPI as none of it is userspace applicable, and remove from the UAPI that part of linux/fs.h that was the reason for linux/blk_types.h being exported in the first place. I discussed this with Jens Axboe before creating the patch. (3) The big patch of the series to disintegrate include/linux/*.h as a unit. This could be split up, though there would be collisions in moving stuff between the two Kbuild files when the parts are merged as that file is sorted alphabetically rather than being grouped by subsystem. Of this set of headers, 17 files have changed in the UAPI exported region since the 4th and only 8 since the 9th so there isn't much change in this area - as one might expect. It should be pretty obvious and straightforward if it does come to fixing up: stuff in __KERNEL__ guards stays where it is and stuff outside moves to the same file in the include/uapi/linux/ directory. If a new file appears then things get a bit more complicated as the "headers +=" line has to move to include/uapi/linux/Kbuild. Only one new file has appeared since the 9th and I judge this type of event relatively unlikely. (4) A patch to disintegrate include/linux/byteorder/*.h as a unit. Signed-off-by: David Howells <dhowells@redhat.com>" * tag 'disintegrate-main-20121013' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: (Scripted) Disintegrate include/linux/byteorder UAPI: (Scripted) Disintegrate include/linux UAPI: Unexport linux/blk_types.h UAPI: Unexport part of linux/ppp-comp.h -
git://git.infradead.org/users/dhowells/linux-headersLinus Torvalds authored
Pull spi UAPI disintegration from David Howells: "This is to complete part of the Userspace API (UAPI) disintegration for which the preparatory patches were pulled recently. After these patches, userspace headers will be segregated into: include/uapi/linux/.../foo.h for the userspace interface stuff, and: include/linux/.../foo.h for the strictly kernel internal stuff. Signed-off-by: -
git://openrisc.net/jonas/linuxLinus Torvalds authored
Pull OpenRISC uapi disintegration from Jonas Bonn: "OpenRISC UAPI disintegration work from David Howells" * tag 'openrisc-uapi' of git://openrisc.net/jonas/linux: UAPI: (Scripted) Disintegrate arch/openrisc/include/asm
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull user namespace compile fixes from Eric W Biederman: "This tree contains three trivial fixes. One compiler warning, one thinko fix, and one build fix" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: btrfs: Fix compilation with user namespace support enabled userns: Fix posix_acl_file_xattr_userns gid conversion userns: Properly print bluetooth socket uids
-
