driver needs queue msix vectors and one misc irq vector,
but only queue vectors need irq affinity.
when num_online_cpus is less than chip max msix vectors,
driver will acquire (num_online_cpus + 1) vecotrs, and
call pci_alloc_irq_vectors_affinity functions with affinity
params without setting pre_vectors or post_vectors, it will
cause return error code -ENOSPC.
Misc irq vector is vector 0, driver need to set affinity params
.pre_vectors = 1.

Fixes: 3f703186 ("net: libwx: Add irq flow functions")
Signed-off-by: Duanqiang Wen <duanqiangwen@net-swift.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from Jakub Kicinski:
 "A little calmer than usual, probably just the timing of sub-tree PRs.

  Including fixes from netfilter.

  Current release - regressions:

   - inet: bring NLM_DONE out to a separate recv() again, fix user space
     which assumes multiple recv()s will happen and gets blocked forever

   - drv: mlx5:
       - restore mistakenly dropped parts in register devlink flow
       - use channel mdev reference instead of global mdev instance for
         coalescing
       - acquire RTNL lock before RQs/SQs activation/deactivation

  Previous releases - regressions:

   - net: change maximum number of UDP segments to 128, fix virtio
     compatibility with Windows peers

   - usb: ax88179_178a: avoid writing the mac address before first
     reading

  Previous releases - always broken:

   - sched: fix mirred deadlock on device recursion

   - netfilter:
       - br_netfilter: skip conntrack input hook for promisc packets
       - fixes removal of duplicate elements in the pipapo set backend
       - various fixes for abort paths and error handling

   - af_unix: don't peek OOB data without MSG_OOB

   - drv: flower: fix fragment flags handling in multiple drivers

   - drv: ravb: fix jumbo frames and packet stats accounting

  Misc:

   - kselftest_harness: fix Clang warning about zero-length format

   - tun: limit printing rate when illegal packet received by tun dev"

* tag 'net-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
  net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them
  net: usb: ax88179_178a: avoid writing the mac address before first reading
  net: ravb: Fix RX byte accounting for jumbo packets
  net: ravb: Fix GbEth jumbo packet RX checksum handling
  net: ravb: Allow RX loop to move past DMA mapping errors
  net: ravb: Count packets instead of descriptors in R-Car RX path
  net: ethernet: mtk_eth_soc: fix WED + wifi reset
  net:usb:qmi_wwan: support Rolling modules
  selftests: kselftest_harness: fix Clang warning about zero-length format
  net/sched: Fix mirred deadlock on device recursion
  netfilter: nf_tables: fix memleak in map from abort path
  netfilter: nf_tables: restore set elements when delete set fails
  netfilter: nf_tables: missing iterator type in lookup walk
  s390/ism: Properly fix receive message buffer allocation
  net: dsa: mt7530: fix port mirroring for MT7988 SoC switch
  net: dsa: mt7530: fix mirroring frames received on local port
  tun: limit printing rate when illegal packet received by tun dev
  ice: Fix checking for unsupported keys on non-tunnel device
  ice: tc: allow zero flags in parsing tc flower
  ice: tc: check src_vsi in case of traffic from VF
  ...

Pull gpio fixes from Bartosz Golaszewski:

 - use -ENOTSUPP consistently in Intel GPIO drivers

 - don't include dt-bindings headers in gpio-swnode code

 - add missing of device table to gpio-lpc32xx and fix autoloading

* tag 'gpio-fixes-for-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: swnode: Remove wrong header inclusion
  gpio: lpc32xx: fix module autoloading
  gpio: crystalcove: Use -ENOTSUPP consistently
  gpio: wcove: Use -ENOTSUPP consistently

The TX and RX DMA Channels used by the driver to exchange data with CPSW
are not guaranteed to be in a clean state during driver initialization.
The Bootloader could have used the same DMA Channels without cleaning them
up in the event of failure. Thus, reset and disable the DMA Channels to
ensure that they are in a clean state before using them.

Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Reported-by: Schuyler Patton <spatton@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240417095425.2253876-1-s-vadapalli@ti.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After the commit d2689b6a ("net: usb: ax88179_178a: avoid two
consecutive device resets"), reset operation, in which the default mac
address from the device is read, is not executed from bind operation and
the random address, that is pregenerated just in case, is direclty written
the first time in the device, so the default one from the device is not
even read. This writing is not dangerous because is volatile and the
default mac address is not missed.

In order to avoid this and keep the simplification to have only one
reset and reduce the delays, restore the reset from bind operation and
remove the reset that is commanded from open operation. The behavior is
the same but everything is ready for usbnet_probe.

Tested with ASIX AX88179 USB Gigabit Ethernet devices.
Restore the old behavior for the rest of possible devices because I don't
have the hardware to test.

cc: stable@vger.kernel.org # 6.6+
Fixes: d2689b6a ("net: usb: ax88179_178a: avoid two consecutive device resets")
Reported-by: Jarkko Palviainen <jarkko.palviainen@gmail.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://lore.kernel.org/r/20240417085524.219532-1-jtornosm@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull random number generator fixes from Jason Donenfeld:

 - The input subsystem contributes entropy in some places where a
   spinlock is held, but the entropy accounting code only handled
   callers being in an interrupt or non-atomic process context, but not
   atomic process context. We fix this by removing an optimization and
   just calling queue_work() unconditionally.

 - Greg accidently sent up a patch not intended for his tree and that
   had been nack'd, so that's now reverted.

* tag 'random-6.9-rc5-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  Revert "vmgenid: emit uevent when VMGENID updates"
  random: handle creditable entropy from atomic process context

Merge tag 'platform-drivers-x86-v6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Ilpo Järvinen:

 - amd/pmf: Add SPS notifications quirk (+ quirk support)

 - amd/pmf: Lower Smart PC check message severity

 - x86/ISST: New HW support

 - x86/intel-uncore-freq: Bump minor version to avoid "unsupported" message

 - amd/pmc: New BIOS version still needs Spurious IRQ1 quirk

* tag 'platform-drivers-x86-v6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/amd/pmc: Extend Framework 13 quirk to more BIOSes
  platform/x86/intel-uncore-freq: Increase minor number support
  platform/x86: ISST: Add Granite Rapids-D to HPM CPU list
  platform/x86/amd: pmf: Add quirk for ROG Zephyrus G14
  platform/x86/amd: pmf: Add infrastructure for quirking supported funcs
  platform/x86/amd: pmf: Decrease error message to debug

This reverts commit ad6bcdad. I had
nak'd it, and Greg said on the thread that it links that he wasn't going
to take it either, especially since it's not his code or his tree, but
then, seemingly accidentally, it got pushed up some months later, in
what looks like a mistake, with no further discussion in the linked
thread. So revert it, since it's clearly not intended.

Fixes: ad6bcdad ("vmgenid: emit uevent when VMGENID updates")
Cc: stable@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230531095119.11202-2-bchalios@amazon.esSigned-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

Patch #1 amends a missing spot where the set iterator type is unset.
	 This is fixing a issue in the previous pull request.

Patch #2 fixes the delete set command abort path by restoring state
         of the elements. Reverse logic for the activate (abort) case
	 otherwise element state is not restored, this requires to move
	 the check for active/inactive elements to the set iterator
	 callback. From the deactivate path, toggle the next generation
	 bit and from the activate (abort) path, clear the next generation
	 bitmask.

Patch #3 skips elements already restored by delete set command from the
	 abort path in case there is a previous delete element command in
	 the batch. Check for the next generation bit just like it is done
	 via set iteration to restore maps.

netfilter pull request 24-04-18

* tag 'nf-24-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: fix memleak in map from abort path
  netfilter: nf_tables: restore set elements when delete set fails
  netfilter: nf_tables: missing iterator type in lookup walk
====================

Link: https://lore.kernel.org/r/20240418010948.3332346-1-pablo@netfilter.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Paul Barker says:

====================
ravb Ethernet driver bugfixes

These patches fix bugs found during recent work on the ravb driver.

Patches 1 & 2 affect the R-Car code paths so have been tested on an
R-Car M3N Salvator-XS board - this is the only R-Car board I currently
have access to.

Patches 2, 3 & 4 affect the GbEth code paths so have been tested on
RZ/G2L and RZ/G2UL SMARC EVK boards.

Changes v2->v3:
  * Incorporate feedback from Niklas and add Reviewed-by tag to patch
    "net: ravb: Count packets instead of descriptors in R-Car RX path".
Changes v1->v2:
  * Fixed typos in commit message of patch
    "net: ravb: Allow RX loop to move past DMA mapping errors".
  * Added Sergey's Reviewed-by tags.
  * Expanded Cc list as Patchwork complained that I had missed people.
  * Trimmed the call trace in accordance with the docs [1] in patch
    "net: ravb: Fix GbEth jumbo packet RX checksum handling".

[1]: https://docs.kernel.org/process/submitting-patches.html#backtraces-in-commit-messages
====================

Link: https://lore.kernel.org/r/20240416120254.2620-1-paul.barker.ct@bp.renesas.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The RX byte accounting for jumbo packets was changed to fix a potential
use-after-free bug. However, that fix used the wrong variable and so
only accounted for the number of bytes in the final descriptor, not the
number of bytes in the whole packet.

To fix this, we can simply update our stats with the correct number of
bytes before calling napi_gro_receive().

Also rename pkt_len to desc_len in ravb_rx_gbeth() to avoid any future
confusion. The variable name pkt_len is correct in ravb_rx_rcar() as
that function does not handle packets spanning multiple descriptors.

Fixes: 5a5a3e56 ("ravb: Fix potential use-after-free in ravb_rx_gbeth()")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Sending a 7kB ping packet to the RZ/G2L in v6.9-rc2 causes the following
backtrace:

	WARNING: CPU: 0 PID: 0 at include/linux/skbuff.h:3127 skb_trim+0x30/0x38
	Hardware name: Renesas SMARC EVK based on r9a07g044l2 (DT)
	pc : skb_trim+0x30/0x38
	lr : ravb_rx_csum_gbeth+0x40/0x90
	Call trace:
	 skb_trim+0x30/0x38
	 ravb_rx_gbeth+0x56c/0x5cc
	 ravb_poll+0xa0/0x204
	 __napi_poll+0x38/0x17c

This is caused by ravb_rx_gbeth() calling ravb_rx_csum_gbeth() with the
wrong skb for a packet which spans multiple descriptors. To fix this,
use the correct skb.

Fixes: c2da9408 ("ravb: Add Rx checksum offload support for GbEth")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The RX loops in ravb_rx_gbeth() and ravb_rx_rcar() skip to the next loop
iteration if a zero-length descriptor is seen (indicating a DMA mapping
error). However, the current RX descriptor index `priv->cur_rx[q]` was
incremented at the end of the loop and so would not be incremented when
we skip to the next loop iteration. This would cause the loop to keep
seeing the same zero-length descriptor instead of moving on to the next
descriptor.

As the loop counter `i` still increments, the loop would eventually
terminate so there is no risk of being stuck here forever - but we
should still fix this to avoid wasting cycles.

To fix this, the RX descriptor index is incremented at the top of the
loop, in the for statement itself. The assignments of `entry` and `desc`
are brought into the loop to avoid the need for duplication.

Fixes: d8b48911 ("ravb: fix ring memory allocation")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The units of "work done" in the RX path should be packets instead of
descriptors.

Descriptors which are used by the hardware to record error conditions or
are empty in the case of a DMA mapping error should not count towards
our RX work budget.

Also make the limit variable unsigned as it can never be negative.

Fixes: c156633f ("Renesas Ethernet AVB driver proper")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The WLAN + WED reset sequence relies on being able to receive interrupts from
the card, in order to synchronize individual steps with the firmware.
When WED is stopped, leave interrupts running and rely on the driver turning
off unwanted ones.
WED DMA also needs to be disabled before resetting.

Fixes: f78cd9c7 ("net: ethernet: mtk_wed: update mtk_wed_stop")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20240416082330.82564-1-nbd@nbd.nameSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update the qmi_wwan driver support for the Rolling
LTE modules.

- VID:PID 33f8:0104, RW101-GL for laptop debug M.2 cards(with RMNET
interface for /Linux/Chrome OS)
0x0104: RMNET, diag, at, pipe

Here are the outputs of usb-devices:
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=33f8 ProdID=0104 Rev=05.04
S:  Manufacturer=Rolling Wireless S.a.r.l.
S:  Product=Rolling Module
S:  SerialNumber=ba2eb033
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
Signed-off-by: Vanillan Wang <vanillanwang@163.com>
Link: https://lore.kernel.org/r/20240416120713.24777-1-vanillanwang@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-04-16 (ice)

This series contains updates to ice driver only.

Michal fixes a couple of issues with TC filter parsing; always add match
for src_vsi and remove flag check that could prevent addition of valid
filters.

Marcin adds additional checks for unsupported flower filters.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: Fix checking for unsupported keys on non-tunnel device
  ice: tc: allow zero flags in parsing tc flower
  ice: tc: check src_vsi in case of traffic from VF
====================

Link: https://lore.kernel.org/r/20240416202409.2008383-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Apparently it's more legal to pass the format as NULL, than
it is to use an empty string. Clang complains about empty
formats:

./../kselftest_harness.h:1207:30: warning: format string is empty
[-Wformat-zero-length]
 1207 |            diagnostic ? "%s" : "", diagnostic);
      |                                 ^~
1 warning generated.
Reported-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/20240409224256.1581292-1-seanjc@google.com
Fixes: 378193ef ("selftests: kselftest_harness: let PASS / FAIL provide diagnostic")
Tested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240416151048.1682352-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull btrfs fixes from David Sterba:

 - fixup in zoned mode for out-of-order writes of metadata that are no
   longer necessary, this used to be tracked in a separate list but now
   the old locaion needs to be zeroed out, also add assertions

 - fix bulk page allocation retry, this may stall after first failure
   for compression read/write

* tag 'for-6.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: do not wait for short bulk allocation
  btrfs: zoned: add ASSERT and WARN for EXTENT_BUFFER_ZONED_ZEROOUT handling
  btrfs: zoned: do not flag ZEROOUT on non-dirty extent buffer

When the mirred action is used on a classful egress qdisc and a packet is
mirrored or redirected to self we hit a qdisc lock deadlock.
See trace below.

[..... other info removed for brevity....]
[   82.890906]
[   82.890906] ============================================
[   82.890906] WARNING: possible recursive locking detected
[   82.890906] 6.8.0-05205-g77fadd89fe2d-dirty #213 Tainted: G        W
[   82.890906] --------------------------------------------
[   82.890906] ping/418 is trying to acquire lock:
[   82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at:
__dev_queue_xmit+0x1778/0x3550
[   82.890906]
[   82.890906] but task is already holding lock:
[   82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at:
__dev_queue_xmit+0x1778/0x3550
[   82.890906]
[   82.890906] other info that might help us debug this:
[   82.890906]  Possible unsafe locking scenario:
[   82.890906]
[   82.890906]        CPU0
[   82.890906]        ----
[   82.890906]   lock(&sch->q.lock);
[   82.890906]   lock(&sch->q.lock);
[   82.890906]
[   82.890906]  *** DEADLOCK ***
[   82.890906]
[..... other info removed for brevity....]

Example setup (eth0->eth0) to recreate
tc qdisc add dev eth0 root handle 1: htb default 30
tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \
     action mirred egress redirect dev eth0

Another example(eth0->eth1->eth0) to recreate
tc qdisc add dev eth0 root handle 1: htb default 30
tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \
     action mirred egress redirect dev eth1

tc qdisc add dev eth1 root handle 1: htb default 30
tc filter add dev eth1 handle 1: protocol ip prio 2 matchall \
     action mirred egress redirect dev eth0

We fix this by adding an owner field (CPU id) to struct Qdisc set after
root qdisc is entered. When the softirq enters it a second time, if the
qdisc owner is the same CPU, the packet is dropped to break the loop.
Reported-by: Mingshuai Ren <renmingshuai@huawei.com>
Closes: https://lore.kernel.org/netdev/20240314111713.5979-1-renmingshuai@huawei.com/
Fixes: 3bcb846c ("net: get rid of spin_trylock() in net_tx_action()")
Fixes: e578d9c0 ("net: sched: use counter to break reclassify loops")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240415210728.36949-1-victor@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The delete set command does not rely on the transaction object for
element removal, therefore, a combination of delete element + delete set
from the abort path could result in restoring twice the refcount of the
mapping.

Check for inactive element in the next generation for the delete element
command in the abort path, skip restoring state if next generation bit
has been already cleared. This is similar to the activate logic using
the set walk iterator.

[ 6170.286929] ------------[ cut here ]------------
[ 6170.286939] WARNING: CPU: 6 PID: 790302 at net/netfilter/nf_tables_api.c:2086 nf_tables_chain_destroy+0x1f7/0x220 [nf_tables]
[ 6170.287071] Modules linked in: [...]
[ 6170.287633] CPU: 6 PID: 790302 Comm: kworker/6:2 Not tainted 6.9.0-rc3+ #365
[ 6170.287768] RIP: 0010:nf_tables_chain_destroy+0x1f7/0x220 [nf_tables]
[ 6170.287886] Code: df 48 8d 7d 58 e8 69 2e 3b df 48 8b 7d 58 e8 80 1b 37 df 48 8d 7d 68 e8 57 2e 3b df 48 8b 7d 68 e8 6e 1b 37 df 48 89 ef eb c4 <0f> 0b 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 0f
[ 6170.287895] RSP: 0018:ffff888134b8fd08 EFLAGS: 00010202
[ 6170.287904] RAX: 0000000000000001 RBX: ffff888125bffb28 RCX: dffffc0000000000
[ 6170.287912] RDX: 0000000000000003 RSI: ffffffffa20298ab RDI: ffff88811ebe4750
[ 6170.287919] RBP: ffff88811ebe4700 R08: ffff88838e812650 R09: fffffbfff0623a55
[ 6170.287926] R10: ffffffff8311d2af R11: 0000000000000001 R12: ffff888125bffb10
[ 6170.287933] R13: ffff888125bffb10 R14: dead000000000122 R15: dead000000000100
[ 6170.287940] FS:  0000000000000000(0000) GS:ffff888390b00000(0000) knlGS:0000000000000000
[ 6170.287948] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6170.287955] CR2: 00007fd31fc00710 CR3: 0000000133f60004 CR4: 00000000001706f0
[ 6170.287962] Call Trace:
[ 6170.287967]  <TASK>
[ 6170.287973]  ? __warn+0x9f/0x1a0
[ 6170.287986]  ? nf_tables_chain_destroy+0x1f7/0x220 [nf_tables]
[ 6170.288092]  ? report_bug+0x1b1/0x1e0
[ 6170.287986]  ? nf_tables_chain_destroy+0x1f7/0x220 [nf_tables]
[ 6170.288092]  ? report_bug+0x1b1/0x1e0
[ 6170.288104]  ? handle_bug+0x3c/0x70
[ 6170.288112]  ? exc_invalid_op+0x17/0x40
[ 6170.288120]  ? asm_exc_invalid_op+0x1a/0x20
[ 6170.288132]  ? nf_tables_chain_destroy+0x2b/0x220 [nf_tables]
[ 6170.288243]  ? nf_tables_chain_destroy+0x1f7/0x220 [nf_tables]
[ 6170.288366]  ? nf_tables_chain_destroy+0x2b/0x220 [nf_tables]
[ 6170.288483]  nf_tables_trans_destroy_work+0x588/0x590 [nf_tables]

Fixes: 59105446 ("netfilter: nf_tables: revisit chain/object refcounting from elements")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The flags in the software node properties are supposed to be
the GPIO lookup flags, which are provided by gpio/machine.h,
as the software nodes are the kernel internal thing and doesn't
need to rely to any of ABIs.

Fixes: e7f9ff5d ("gpiolib: add support for software nodes")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Pull pwm fixes from Uwe Kleine-König:
 "The first patch fixes a regression in the suspend/resume path for the
  dwc pwm driver that was introduced in v6.9-rc1 when support for 16
  channel devices was added.

  The second patch fixes a bunch of device tree binding check warnings"

* tag 'pwm/for-6.9-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
  dt-bindings: pwm: mediatek,pwm-disp: Document power-domains property
  pwm: dwc: allow suspend/resume for 16 channels

From abort path, nft_mapelem_activate() needs to restore refcounters to
the original state. Currently, it uses the set->ops->walk() to iterate
over these set elements. The existing set iterator skips inactive
elements in the next generation, this does not work from the abort path
to restore the original state since it has to skip active elements
instead (not inactive ones).

This patch moves the check for inactive elements to the set iterator
callback, then it reverses the logic for the .activate case which
needs to skip active elements.

Toggle next generation bit for elements when delete set command is
invoked and call nft_clear() from .activate (abort) path to restore the
next generation bit.

The splat below shows an object in mappings memleak:

[43929.457523] ------------[ cut here ]------------
[43929.457532] WARNING: CPU: 0 PID: 1139 at include/net/netfilter/nf_tables.h:1237 nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[...]
[43929.458014] RIP: 0010:nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458076] Code: 83 f8 01 77 ab 49 8d 7c 24 08 e8 37 5e d0 de 49 8b 6c 24 08 48 8d 7d 50 e8 e9 5c d0 de 8b 45 50 8d 50 ff 89 55 50 85 c0 75 86 <0f> 0b eb 82 0f 0b eb b3 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90
[43929.458081] RSP: 0018:ffff888140f9f4b0 EFLAGS: 00010246
[43929.458086] RAX: 0000000000000000 RBX: ffff8881434f5288 RCX: dffffc0000000000
[43929.458090] RDX: 00000000ffffffff RSI: ffffffffa26d28a7 RDI: ffff88810ecc9550
[43929.458093] RBP: ffff88810ecc9500 R08: 0000000000000001 R09: ffffed10281f3e8f
[43929.458096] R10: 0000000000000003 R11: ffff0000ffff0000 R12: ffff8881434f52a0
[43929.458100] R13: ffff888140f9f5f4 R14: ffff888151c7a800 R15: 0000000000000002
[43929.458103] FS:  00007f0c687c4740(0000) GS:ffff888390800000(0000) knlGS:0000000000000000
[43929.458107] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[43929.458111] CR2: 00007f58dbe5b008 CR3: 0000000123602005 CR4: 00000000001706f0
[43929.458114] Call Trace:
[43929.458118]  <TASK>
[43929.458121]  ? __warn+0x9f/0x1a0
[43929.458127]  ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458188]  ? report_bug+0x1b1/0x1e0
[43929.458196]  ? handle_bug+0x3c/0x70
[43929.458200]  ? exc_invalid_op+0x17/0x40
[43929.458211]  ? nft_setelem_data_deactivate+0xd7/0xf0 [nf_tables]
[43929.458271]  ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458332]  nft_mapelem_deactivate+0x24/0x30 [nf_tables]
[43929.458392]  nft_rhash_walk+0xdd/0x180 [nf_tables]
[43929.458453]  ? __pfx_nft_rhash_walk+0x10/0x10 [nf_tables]
[43929.458512]  ? rb_insert_color+0x2e/0x280
[43929.458520]  nft_map_deactivate+0xdc/0x1e0 [nf_tables]
[43929.458582]  ? __pfx_nft_map_deactivate+0x10/0x10 [nf_tables]
[43929.458642]  ? __pfx_nft_mapelem_deactivate+0x10/0x10 [nf_tables]
[43929.458701]  ? __rcu_read_unlock+0x46/0x70
[43929.458709]  nft_delset+0xff/0x110 [nf_tables]
[43929.458769]  nft_flush_table+0x16f/0x460 [nf_tables]
[43929.458830]  nf_tables_deltable+0x501/0x580 [nf_tables]

Fixes: 628bd3e4 ("netfilter: nf_tables: drop map element references from preparation phase")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Add missing decorator type to lookup expression and tighten WARN_ON_ONCE
check in pipapo to spot earlier that this is unset.

Fixes: 29b359cf ("netfilter: nft_set_pipapo: walk over current view on netlink dump")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

BIOS 03.05 still hasn't fixed the spurious IRQ1 issue.  As it's still
being worked on there is still a possibility that it won't need to
apply to future BIOS releases.

Add a quirk for BIOS 03.05 as well.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240410141046.433-1-mario.limonciello@amd.comReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Since [1], dma_alloc_coherent() does not accept requests for GFP_COMP
anymore, even on archs that may be able to fulfill this. Functionality that
relied on the receive buffer being a compound page broke at that point:
The SMC-D protocol, that utilizes the ism device driver, passes receive
buffers to the splice processor in a struct splice_pipe_desc with a
single entry list of struct pages. As the buffer is no longer a compound
page, the splice processor now rejects requests to handle more than a
page worth of data.

Replace dma_alloc_coherent() and allocate a buffer with folio_alloc and
create a DMA map for it with dma_map_page(). Since only receive buffers
on ISM devices use DMA, qualify the mapping as FROM_DEVICE.
Since ISM devices are available on arch s390, only, and on that arch all
DMA is coherent, there is no need to introduce and export some kind of
dma_sync_to_cpu() method to be called by the SMC-D protocol layer.

Analogously, replace dma_free_coherent by a two step dma_unmap_page,
then folio_put to free the receive buffer.

[1] https://lore.kernel.org/all/20221113163535.884299-1-hch@lst.de/

Fixes: c08004ee ("s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent")
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The entropy accounting changes a static key when the RNG has
initialized, since it only ever initializes once. Static key changes,
however, cannot be made from atomic context, so depending on where the
last creditable entropy comes from, the static key change might need to
be deferred to a worker.

Previously the code used the execute_in_process_context() helper
function, which accounts for whether or not the caller is
in_interrupt(). However, that doesn't account for the case where the
caller is actually in process context but is holding a spinlock.

This turned out to be the case with input_handle_event() in
drivers/input/input.c contributing entropy:

  [<ffffffd613025ba0>] die+0xa8/0x2fc
  [<ffffffd613027428>] bug_handler+0x44/0xec
  [<ffffffd613016964>] brk_handler+0x90/0x144
  [<ffffffd613041e58>] do_debug_exception+0xa0/0x148
  [<ffffffd61400c208>] el1_dbg+0x60/0x7c
  [<ffffffd61400c000>] el1h_64_sync_handler+0x38/0x90
  [<ffffffd613011294>] el1h_64_sync+0x64/0x6c
  [<ffffffd613102d88>] __might_resched+0x1fc/0x2e8
  [<ffffffd613102b54>] __might_sleep+0x44/0x7c
  [<ffffffd6130b6eac>] cpus_read_lock+0x1c/0xec
  [<ffffffd6132c2820>] static_key_enable+0x14/0x38
  [<ffffffd61400ac08>] crng_set_ready+0x14/0x28
  [<ffffffd6130df4dc>] execute_in_process_context+0xb8/0xf8
  [<ffffffd61400ab30>] _credit_init_bits+0x118/0x1dc
  [<ffffffd6138580c8>] add_timer_randomness+0x264/0x270
  [<ffffffd613857e54>] add_input_randomness+0x38/0x48
  [<ffffffd613a80f94>] input_handle_event+0x2b8/0x490
  [<ffffffd613a81310>] input_event+0x6c/0x98

According to Guoyong, it's not really possible to refactor the various
drivers to never hold a spinlock there. And in_atomic() isn't reliable.

So, rather than trying to be too fancy, just punt the change in the
static key to a workqueue always. There's basically no drawback of doing
this, as the code already needed to account for the static key not
changing immediately, and given that it's just an optimization, there's
not exactly a hurry to change the static key right away, so deferal is
fine.
Reported-by: Guoyong Wang <guoyong.wang@mediatek.com>
Cc: stable@vger.kernel.org
Fixes: f5bda35f ("random: use static branch for crng_ready()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Merge branch 'mr7530-fixes'

Arınç ÜNAL says:

====================
Fix port mirroring on MT7530 DSA subdriver

This patch series fixes the frames received on the local port (monitor
port) not being mirrored, and port mirroring for the MT7988 SoC switch.
====================
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>

The "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open Version)
v0.1" document shows bits 16 to 18 as the MIRROR_PORT field of the CPU
forward control register. Currently, the MT7530 DSA subdriver configures
bits 0 to 2 of the CPU forward control register which breaks the port
mirroring feature for the MT7988 SoC switch.

Fix this by using the MT7531_MIRROR_PORT_GET() and MT7531_MIRROR_PORT_SET()
macros which utilise the correct bits.

Fixes: 110c18bf ("net: dsa: mt7530: introduce driver for MT7988 built-in switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This switch intellectual property provides a bit on the ARL global control
register which controls allowing mirroring frames which are received on the
local port (monitor port). This bit is unset after reset.

This ability must be enabled to fully support the port mirroring feature on
this switch intellectual property.

Therefore, this patch fixes the traffic not being reflected on a port,
which would be configured like below:

  tc qdisc add dev swp0 clsact

  tc filter add dev swp0 ingress matchall skip_sw \
  action mirred egress mirror dev swp0

As a side note, this configuration provides the hairpinning feature for a
single port.

Fixes: 37feab60 ("net: dsa: mt7530: add support for port mirroring")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost_worker will call tun call backs to receive packets. If too many
illegal packets arrives, tun_do_read will keep dumping packet contents.
When console is enabled, it will costs much more cpu time to dump
packet and soft lockup will be detected.

net_ratelimit mechanism can be used to limit the dumping rate.

PID: 33036    TASK: ffff949da6f20000  CPU: 23   COMMAND: "vhost-32980"
 #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253
 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3
 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e
 #3 [fffffe00003fced0] do_nmi at ffffffff8922660d
 #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663
    [exception RIP: io_serial_in+20]
    RIP: ffffffff89792594  RSP: ffffa655314979e8  RFLAGS: 00000002
    RAX: ffffffff89792500  RBX: ffffffff8af428a0  RCX: 0000000000000000
    RDX: 00000000000003fd  RSI: 0000000000000005  RDI: ffffffff8af428a0
    RBP: 0000000000002710   R8: 0000000000000004   R9: 000000000000000f
    R10: 0000000000000000  R11: ffffffff8acbf64f  R12: 0000000000000020
    R13: ffffffff8acbf698  R14: 0000000000000058  R15: 0000000000000000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594
 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470
 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6
 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605
 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558
 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124
 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07
 #12 [ffffa65531497b68] printk at ffffffff89318306
 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765
 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun]
 #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun]
 #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net]
 #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost]
 #18 [ffffa65531497f10] kthread at ffffffff892d2e72
 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f

Fixes: ef3db4a5 ("tun: avoid BUG, dump packet on GSO errors")
Signed-off-by: Lei Chen <lei.chen@smartx.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add missing FLOW_DISSECTOR_KEY_ENC_* checks to TC flower filter parsing.
Without these checks, it would be possible to add filters with tunnel
options on non-tunnel devices. enc_* options are only valid for tunnel
devices.

Example:
  devlink dev eswitch set $PF1_PCI mode switchdev
  echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
  tc qdisc add dev $VF1_PR ingress
  ethtool -K $PF1 hw-tc-offload on
  tc filter add dev $VF1_PR ingress flower enc_ttl 12 skip_sw action drop

Fixes: 9e300987 ("ice: VXLAN and Geneve TC support")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The check for flags is done to not pass empty lookups to adding switch
rule functions. Since metadata is always added to lookups there is no
need to check against the flag.

It is also fixing the problem with such rule:
$ tc filter add dev gtp_dev ingress protocol ip prio 0 flower \
	enc_dst_port 2123 action drop
Switch block in case of GTP can't parse the destination port, because it
should always be set to GTP specific value. The same with ethertype. The
result is that there is no other matching criteria than GTP tunnel. In
this case flags is 0, rule can't be added only because of defensive
check against flags.

Fixes: 9a225f81 ("ice: Support GTP-U and GTP-C offload in switchdev")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

In case of traffic going from the VF (so ingress for port representor)
source VSI should be consider during packet classification. It is
needed for hardware to not match packets from different ports with
filters added on other port.

It is only for "from VF" traffic, because other traffic direction
doesn't have source VSI.

Set correct ::src_vsi in rule_info to pass it to the hardware filter.

For example this rule should drop only ipv4 packets from eth10, not from
the others VF PRs. It is needed to check source VSI in this case.
$tc filter add dev eth10 ingress protocol ip flower skip_sw action drop

Fixes: 0d08a441 ("ice: ndo_setup_tc implementation for PF")
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Serge Semin says:

====================
net: stmmac: Fix MAC-capabilities procedure

The series got born as a result of the discussions around the recent
Yanteng' series adding the Loongson LS7A1000, LS2K1000, LS7A2000, LS2K2000
MACs support:
Link: https://lore.kernel.org/netdev/fu3f6uoakylnb6eijllakeu5i4okcyqq7sfafhp5efaocbsrwe@w74xe7gb6x7p

In particular the Yanteng' patchset needed to implement the Loongson
MAC-specific constraints applied to the link speed and link duplex mode.
As a result of the discussion with Russel the next preliminary patch was
born:
Link: https://lore.kernel.org/netdev/df31e8bcf74b3b4ddb7ddf5a1c371390f16a2ad5.1712917541.git.siyanteng@loongson.cn

The patch above was a temporal solution utilized by Yanteng for further
developments and to move on with the on-going review. This patchset is a
refactored version of that single patch with formatting required for the
fixes patches.

In particular the series starts with fixing the half-duplex-less
constraint currently applied for all IP-cores. In fact it's specific for
the DW QoS Eth only (DW GMAC v4.x/v5.x).

The next patch fixes the MAC-capabilities setting up during the active
Tx/Rx queues re-initialization procedure. Particularly the procedure
missed the max-speed limit thus possibly activating speeds prohibited on
the respective platforms.

Third patch fixes the incorrect MAC-capabilities initialization for DW
MAC100, DW XGMAC and DW XLGMAC devices by moving the correct
initialization to the IP-core specific setup() methods.

That's it for now. Thanks for review and testing in advance.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Cc: linux-kernel@vger.kernel.org
====================

Link: https://lore.kernel.org/r/20240412180340.7965-1-fancer.lancer@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Here is the list of the MAC capabilities specific to the particular DW MAC
IP-cores currently supported by the driver:

DW MAC100: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
	   MAC_10 | MAC_100

DW GMAC:  MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
          MAC_10 | MAC_100 | MAC_1000

Allwinner sun8i MAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
                     MAC_10 | MAC_100 | MAC_1000

DW QoS Eth: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
            MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD
if there is more than 1 active Tx/Rx queues:
	   MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
           MAC_10FD | MAC_100FD | MAC_1000FD | MAC_2500FD

DW XGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
          MAC_1000FD | MAC_2500FD | MAC_5000FD | MAC_10000FD

DW XLGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
          MAC_1000FD | MAC_2500FD | MAC_5000FD | MAC_10000FD |
          MAC_25000FD | MAC_40000FD | MAC_50000FD | MAC_100000FD

As you can see there are only two common capabilities:
MAC_ASYM_PAUSE | MAC_SYM_PAUSE.
Meanwhile what is currently implemented defines 10/100/1000 link speeds
for all IP-cores, which is definitely incorrect for DW MAC100, DW XGMAC
and DW XLGMAC devices.

Seeing the flow-control is implemented as a callback for each MAC IP-core
(see dwmac100_flow_ctrl(), dwmac1000_flow_ctrl(), sun8i_dwmac_flow_ctrl(),
etc) and since the MAC-specific setup() method is supposed to be called
for each available DW MAC-based device, the capabilities initialization
can be freely moved to these setup() functions, thus correctly setting up
the MAC-capabilities for each IP-core (including the Allwinner Sun8i). A
new stmmac_link::caps field was specifically introduced for that so to
have all link-specific info preserved in a single structure.

Note the suggested change fixes three earlier commits at a time. The
commit 5b0d7d7d ("net: stmmac: Add the missing speeds that XGMAC
supports") permitted the 10-100 link speeds and 1G half-duplex mode for DW
XGMAC IP-core even though it doesn't support them. The commit df7699c7
("net: stmmac: Do not cut down 1G modes") incorrectly added the MAC1000
capability to the DW MAC100 IP-core. Similarly to the DW XGMAC the commit
8a880936 ("net: stmmac: Add XLGMII support") incorrectly permitted the
10-100 link speeds and 1G half-duplex mode for DW XLGMAC IP-core.

Fixes: 5b0d7d7d ("net: stmmac: Add the missing speeds that XGMAC supports")
Fixes: df7699c7 ("net: stmmac: Do not cut down 1G modes")
Fixes: 8a880936 ("net: stmmac: Add XLGMII support")
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

It's possible to have the maximum link speed being artificially limited on
the platform-specific basis. It's done either by setting up the
plat_stmmacenet_data::max_speed field or by specifying the "max-speed"
DT-property. In such cases it's required that any specific
MAC-capabilities re-initializations would take the limit into account. In
particular the link speed capabilities may change during the number of
active Tx/Rx queues re-initialization. But the currently implemented
procedure doesn't take the speed limit into account.

Fix that by calling phylink_limit_mac_speed() in the
stmmac_reinit_queues() method if the speed limitation was required in the
same way as it's done in the stmmac_phy_setup() function.

Fixes: 95201f36 ("net: stmmac: update MAC capabilities when tx queues are updated")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

There are three DW MAC IP-cores which can have the multiple Tx/Rx queues
enabled:
DW GMAC v3.7+ with AV feature,
DW QoS Eth v4.x/v5.x,
DW XGMAC/XLGMAC
Based on the respective HW databooks, only the DW QoS Eth IP-core doesn't
support the half-duplex link mode in case if more than one queues enabled:

"In multiple queue/channel configurations, for half-duplex operation,
enable only the Q0/CH0 on Tx and Rx. For single queue/channel in
full-duplex operation, any queue/channel can be enabled."

The rest of the IP-cores don't have such constraint. Thus in order to have
the constraint applied for the DW QoS Eth MACs only, let's move the it'
implementation to the respective MAC-capabilities getter and make sure the
getter is called in the queues re-init procedure.

Fixes: b6cfffa7 ("stmmac: fix DMA channel hang in half-duplex mode")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

No new changes will be added for minor version 2. Change the minor
version number to 2 and stop displaying log message for unsupported
minor version 2.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240415220625.2828339-1-srinivas.pandruvada@linux.intel.comReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>