- 14 Oct, 2013 2 commits
-
-
Joe Perches authored
Preliminary to removing compare_ether_addr altogether: Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
Neil Horman authored
In this pending patch: http://patchwork.open-fcoe.org/patch/104/ Tomas Henzl noted that the error path when fcoe_fcf_device_add fails, was missing a mutex_unlock call. Not sure what staet the integration of the above patch is in, but if you could either merge this with it, or apply it on top of what you already have, that would be great. Thanks! Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: thenzl@redhat.com Reported-by: thenzl@redhat.com Signed-off-by: Robert Love <robert.w.love@intel.com>
-
- 11 Oct, 2013 1 commit
-
-
Robert Love authored
fnic doesn't use any of the create/destroy/enable/disable interfaces either from the (legacy) module paramaters or the (new) fcoe_sysfs interfaces. When fcoe_sysfs was introduced fnic wasn't changed since it wasn't using the interfaces. libfcoe incorrectly assumed that that all of its users were using fcoe_sysfs and when adding and deleting FCFs would assume the existance of a fcoe_ctlr_device. fnic was not allocating this structure because it doesn't care about the standard user interfaces (fnic starts on link only). If/When libfcoe tried to use the fcoe_ctlr_device's lock for the first time a NULL pointer exception would be triggered. Since fnic doesn't care about sysfs or user interfaces, the solution is to drop libfcoe's assumption that all drivers are using fcoe_sysfs. This patch accomplishes this by changing some of the structure relationships. We need a way to determine when a LLD is using fcoe_sysfs or not and we can do that by checking for the existance of the fcoe_ctlr_device. Prior to this patch, it was assumed that the fcoe_ctlr structure was allocated with the fcoe_ctlr_device and immediately followed it in memory. To reach the fcoe_ctlr_device we would simply go back in memory from the fcoe_ctlr to get the fcoe_ctlr_device. Since fnic doesn't allocate the fcoe_ctlr_device, we cannot keep that assumption. This patch adds a pointer from the fcoe_ctlr to the fcoe_ctlr_device. For bnx2fc and fcoe we will continue to allocate the two structures together, but then we'll set the ctlr->cdev pointer to point at the fcoe_ctlr_device. fnic will not change and will continue to allocate the fcoe_ctlr itself, and ctlr->cdev will remain NULL. When libfcoe adds fcoe_fcf's to the fcoe_ctlr it will check if ctlr->cdev is set and only if so will it continue to interact with fcoe_sysfs. Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Tested-by: Hiral Patel <hiralpat@cisco.com>
-
- 04 Sep, 2013 16 commits
-
-
Bart Van Assche authored
This patch fixes the following compiler warning: drivers/scsi/fcoe/fcoe_ctlr.c: In function fcoe_sysfs_fcf_add: drivers/scsi/fcoe/fcoe_ctlr.c:211:1: warning: the frame size of 1480 bytes is larger than 1024 bytes [-Wframe-larger-than=] Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
Bart Van Assche authored
FCoE debug statements must end in a newline. Add one where it is missing. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
Bart Van Assche authored
The function fcoe_ctlr_mode_set() is local, hence declare it static. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
Bart Van Assche authored
This patch avoids that the FCoE initiator sends a REC message after having received a SCSI response with non-zero status and non-zero DATA IN buffer length. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
Bart Van Assche authored
While the FCoE initiator driver invokes fc_exch_done() from inside the libfc response handler, FCoE target drivers typically invoke fc_exch_done() from outside the libfc response handler. The object fc_exch.arg points at may disappear as soon as fc_exch_done() has finished. So it's important not to invoke the response handler function after fc_exch_done() has finished. Modify libfc such that this guarantee is provided if fc_exch_done() is invoked from outside a response handler. This patch fixes a sporadic crash in FCoE target implementations after a command has been aborted. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
Bart Van Assche authored
Reduce the time during which the exchange lock is held by allocating a frame before obtaining the exchange lock. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
Bart Van Assche authored
Calling fc_seq_send() after an ABTS message has been received triggers a kernel warning (WARN_ON(!(ep->esb_stat & ESB_ST_SEQ_INIT))). Avoid this by returning -ENXIO to the caller if fc_seq_send() is invoked after an ABTS message has been received. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
Bart Van Assche authored
This patch avoids that the WARN_ON(!(ep->esb_stat & ESB_ST_SEQ_INIT)) statement in fc_seq_send_locked() gets triggered sporadically when running FCoE target code due to concurrent ep->esb_stat modifications. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
Bart Van Assche authored
It is allowed to pass a zero timeout value to fc_seq_exch_abort(). Avoid that this can cause the timeout function to drop the exchange reference before it has been increased by fc_exch_timer_set_locked(). This patch fixes a crash when running FCoE target code with poisoning enabled in the memory allocator. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
Bart Van Assche authored
The condition ep != NULL && ep->xid != xid can never be met. Make this explicit. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
Bart Van Assche authored
Convert a loop into an ilog2() call. Although this code is not performance sensitive this conversion makes this code easier to read. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
Bart Van Assche authored
The second argument of fc_lport_error() may be a valid frame pointer. Hence only print it as an error code if it really is an error code. Debug statements must end in a newline. Add one where it is missing. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
Bart Van Assche authored
Change 'initiaive' into 'initiative', 'remainig' into 'remaining' and change 'exected' into 'expected'. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
Neil Horman authored
the return codes from fcoe_rcv should be NET_RX_*, not 0 or -1. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
Neil Horman authored
Based on my last patch I noticed that fcoe_rcv has a simmilar problem, in that it manipulates the passed in skb without checking to see if it has other users. Making manipulations to a shared skb can result in various corruptions. Easy fix, just make sure the skb is unshared prior to doing anything with it. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
Neil Horman authored
Recently had this Oops reported to me on the 3.10 kernel: [ 807.554955] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 807.562799] IP: [<ffffffff814e6fc7>] skb_dequeue+0x47/0x70 [ 807.568296] PGD 20c889067 PUD 20c8b8067 PMD 0 [ 807.572769] Oops: 0002 [#1] SMP [ 807.655597] Hardware name: Dell Inc. PowerEdge R415/0DDT2D, BIOS 1.8.6 12/06/2011 [ 807.663079] Workqueue: events fcoe_ctlr_recv_work [libfcoe] [ 807.668656] task: ffff88020b42a160 ti: ffff88020ae6c000 task.ti: ffff88020ae6c000 [ 807.676126] RIP: 0010:[<ffffffff814e6fc7>] [<ffffffff814e6fc7>] skb_dequeue+0x47/0x70 [ 807.684046] RSP: 0000:ffff88020ae6dd70 EFLAGS: 00010097 [ 807.689349] RAX: 0000000000000246 RBX: ffff8801d04d6700 RCX: 0000000000000000 [ 807.696474] RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff88020df26434 [ 807.703598] RBP: ffff88020ae6dd88 R08: 00000000000173e0 R09: ffff880216e173e0 [ 807.710723] R10: ffffffff814e5897 R11: ffffea0007413580 R12: ffff88020df26420 [ 807.717847] R13: ffff88020df26434 R14: 0000000000000004 R15: ffff8801d04c42ce [ 807.724972] FS: 00007fdaab6048c0(0000) GS:ffff880216e00000(0000) knlGS:0000000000000000 [ 807.733049] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 807.738785] CR2: 0000000000000008 CR3: 000000020cbc9000 CR4: 00000000000006f0 [ 807.745910] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 807.753033] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 807.760156] Stack: [ 807.762162] ffff8801d04d6700 0000000000000001 ffff88020df26400 ffff88020ae6de20 [ 807.769586] ffffffffa0444409 ffff88020b046a00 ffff88020ae6dde8 ffffffff810105be [ 807.777008] ffff88020b42a868 0000000000000000 ffff88020df264a8 ffff88020df26348 [ 807.784431] Call Trace: [ 807.786885] [<ffffffffa0444409>] fcoe_ctlr_recv_work+0x59/0x9a0 [libfcoe] [ 807.793755] [<ffffffff810105be>] ? __switch_to+0x13e/0x4a0 [ 807.799324] [<ffffffff8107d0e6>] process_one_work+0x176/0x420 [ 807.805151] [<ffffffff8107dd0b>] worker_thread+0x11b/0x3a0 [ 807.810717] [<ffffffff8107dbf0>] ? rescuer_thread+0x350/0x350 [ 807.816545] [<ffffffff810842b0>] kthread+0xc0/0xd0 [ 807.821416] [<ffffffff810841f0>] ? insert_kthread_work+0x40/0x40 [ 807.827503] [<ffffffff8160ce2c>] ret_from_fork+0x7c/0xb0 [ 807.832897] [<ffffffff810841f0>] ? insert_kthread_work+0x40/0x40 [ 807.858500] RIP [<ffffffff814e6fc7>] skb_dequeue+0x47/0x70 [ 807.864076] RSP <ffff88020ae6dd70> [ 807.867558] CR2: 0000000000000008 Looks like the root cause is the fact that the packet recieve function fcoe_ctlr_recv enqueues the skb to a sk_buff_head_list prior to ensuring that the skb is unshared. This can happen when multiple packet listeners recieve an skb, as the deliver_skb function just increments skb->users for each handler. As a result, having multiple users of a single skb results in multiple manipulators of its methods, implying list corruption, and the oops recorded above. The fix is pretty easy, just make sure that we clone the skb if its got multiple users with the skb_share_check function, like other protocols do. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
-
- 02 Sep, 2013 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fix from James Bottomley: "This is a bug fix for the pm80xx driver. It turns out that when the new hardware support was added in 3.10 the IO command size was kept at the old hard coded value. This means that the driver attaches to some new cards and then simply hangs the system" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] pm80xx: fix Adaptec 71605H hang
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 boot fix from Peter Anvin: "A single very small boot fix for very large memory systems (> 0.5T)" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix boot crash with DEBUG_PAGE_ALLOC=y and more than 512G RAM
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull slave-dma fix from Vinod Koul: "A fix for resolving TI_EDMA driver's build error in allmodconfig to have filter function built in"" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma/Kconfig: TI_EDMA needs to be boolean
-
- 31 Aug, 2013 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) There was a simplification in the ipv6 ndisc packet sending attempted here, which avoided using memory accounting on the per-netns ndisc socket for sending NDISC packets. It did fix some important issues, but it causes regressions so it gets reverted here too. Specifically, the problem with this change is that the IPV6 output path really depends upon there being a valid skb->sk attached. The reason we want to do this change in some form when we figure out how to do it right, is that if a device goes down the ndisc_sk socket send queue will fill up and block NDISC packets that we want to send to other devices too. That's really bad behavior. Hopefully Thomas can come up with a better version of this change. 2) Fix a severe TCP performance regression by reverting a change made to dev_pick_tx() quite some time ago. From Eric Dumazet. 3) TIPC returns wrongly signed error codes, fix from Erik Hugne. 4) Fix OOPS when doing IPSEC over ipv4 tunnels due to orphaning the skb->sk too early. Fix from Li Hongjun. 5) RAW ipv4 sockets can use the wrong routing key during lookup, from Chris Clark. 6) Similar to #1 revert an older change that tried to use plain alloc_skb() for SYN/ACK TCP packets, this broke the netfilter owner mark which needs to see the skb->sk for such frames. From Phil Oester. 7) BNX2x driver bug fixes from Ariel Elior and Yuval Mintz, specifically in the handling of virtual functions. 8) IPSEC path error propagations to sockets is not done properly when we have v4 in v6, and v6 in v4 type rules. Fix from Hannes Frederic Sowa. 9) Fix missing channel context release in mac80211, from Johannes Berg. 10) Fix network namespace handing wrt. SCM_RIGHTS, from Andy Lutomirski. 11) Fix usage of bogus NAPI weight in jme, netxen, and ps3_gelic drivers. From Michal Schmidt. 12) Hopefully a complete and correct fix for the genetlink dump locking and module reference counting. From Pravin B Shelar. 13) sk_busy_loop() must do a cpu_relax(), from Eliezer Tamir. 14) Fix handling of timestamp offset when restoring a snapshotted TCP socket. From Andrew Vagin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) net: fec: fix time stamping logic after napi conversion net: bridge: convert MLDv2 Query MRC into msecs_to_jiffies for max_delay mISDN: return -EINVAL on error in dsp_control_req() net: revert 8728c544 ("net: dev_pick_tx() fix") Revert "ipv6: Don't depend on per socket memory for neighbour discovery messages" ipv4 tunnels: fix an oops when using ipip/sit with IPsec tipc: set sk_err correctly when connection fails tcp: tcp_make_synack() should use sock_wmalloc bridge: separate querier and query timer into IGMP/IPv4 and MLD/IPv6 ones ipv6: Don't depend on per socket memory for neighbour discovery messages ipv4: sendto/hdrincl: don't use destination address found in header tcp: don't apply tsoffset if rcv_tsecr is zero tcp: initialize rcv_tstamp for restored sockets net: xilinx: fix memleak net: usb: Add HP hs2434 device to ZLP exception table net: add cpu_relax to busy poll loop net: stmmac: fixed the pbl setting with DT genl: Hold reference on correct module while netlink-dump. genl: Fix genl dumpit() locking. xfrm: Fix potential null pointer dereference in xdst_queue_output ...
-
Ian Campbell authored
Filtering capabilities on my work email are pretty much non-existent and this has turned out to be something of a firehose... Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Olof Johansson <olof@lixom.net> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "This contains two Oops fixes (opti9xx and HD-audio) and a simple fixup for an Acer laptop. All marked as stable patches" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: opti9xx: Fix conflicting driver object name ALSA: hda - Fix NULL dereference with CONFIG_SND_DYNAMIC_MINORS=n ALSA: hda - Add inverted digital mic fixup for Acer Aspire One
-
- 30 Aug, 2013 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Two straggling fixes that I had missed as they were posted a couple of weeks ago, causing problems with interrupts (breaking them completely) on the CSR SiRF platforms" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm: prima2: drop nr_irqs in mach as we moved to linear irqdomain irqchip: sirf: move from legacy mode to linear irqdomain
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Since we are getting to the pointy end, one i915 black screen on some machines, and one vmwgfx stop userspace ability to nuke the VM, There might be one or two ati or nouveau fixes trickle in before final, but I think this should pretty much be it" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/vmwgfx: Split GMR2_REMAP commands if they are to large drm/i915: ivb: fix edp voltage swing reg val
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input layer updates from Dmitry Torokhov: "Just a couple of new IDs in Wacom and xpad drivers, i8042 is now disabled on ARC, and data checks in Elantech driver that were overly relaxed by the previous patch are now tightened" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - disable the driver on ARC platforms Input: xpad - add signature for Razer Onza Classic Edition Input: elantech - fix packet check for v3 and v4 hardware Input: wacom - add support for 0x300 and 0x301
-
Richard Cochran authored
Commit dc975382 "net: fec: add napi support to improve proformance" converted the fec driver to the napi model. However, that commit forgot to remove the call to skb_defer_rx_timestamp which is only needed in non-napi drivers. (The function napi_gro_receive eventually calls netif_receive_skb, which in turn calls skb_defer_rx_timestamp.) This patch should also be applied to the 3.9 and 3.10 kernels. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
While looking into MLDv1/v2 code, I noticed that bridging code does not convert it's max delay into jiffies for MLDv2 messages as we do in core IPv6' multicast code. RFC3810, 5.1.3. Maximum Response Code says: The Maximum Response Code field specifies the maximum time allowed before sending a responding Report. The actual time allowed, called the Maximum Response Delay, is represented in units of milliseconds, and is derived from the Maximum Response Code as follows: [...] As we update timers that work with jiffies, we need to convert it. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Linus Lüssing <linus.luessing@web.de> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
If skb->len is too short then we should return an error. Otherwise we read beyond the end of skb->data for several bytes. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
commit 8728c544 ("net: dev_pick_tx() fix") and commit b6fe83e9 ("bonding: refine IFF_XMIT_DST_RELEASE capability") are quite incompatible : Queue selection is disabled because skb dst was dropped before entering bonding device. This causes major performance regression, mainly because TCP packets for a given flow can be sent to multiple queues. This is particularly visible when using the new FQ packet scheduler with MQ + FQ setup on the slaves. We can safely revert the first commit now that 416186fb ("net: Split core bits of netdev_pick_tx into __netdev_pick_tx") properly caps the queue_index. Reported-by: Xi Wang <xii@google.com> Diagnosed-by: Xi Wang <xii@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Cc: Denys Fedorysychenko <nuclearcat@nuclearcat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This reverts commit 1f324e38. It seems to cause regressions, and in particular the output path really depends upon there being a socket attached to skb->sk for checks such as sk_mc_loop(skb->sk) for example. See ip6_output_finish2(). Reported-by: Stephen Warren <swarren@wwwdotorg.org> Reported-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li Hongjun authored
Since commit 3d7b46cd (ip_tunnel: push generic protocol handling to ip_tunnel module.), an Oops is triggered when an xfrm policy is configured on an IPv4 over IPv4 tunnel. xfrm4_policy_check() calls __xfrm_policy_check2(), which uses skb_dst(skb). But this field is NULL because iptunnel_pull_header() calls skb_dst_drop(skb). Signed-off-by: Li Hongjun <hongjun.li@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Erik Hugne authored
Should a connect fail, if the publication/server is unavailable or due to some other error, a positive value will be returned and errno is never set. If the application code checks for an explicit zero return from connect (success) or a negative return (failure), it will not catch the error and subsequent send() calls will fail as shown from the strace snippet below. socket(0x1e /* PF_??? */, SOCK_SEQPACKET, 0) = 3 connect(3, {sa_family=0x1e /* AF_??? */, sa_data="\2\1\322\4\0\0\322\4\0\0\0\0\0\0"}, 16) = 111 sendto(3, "test", 4, 0, NULL, 0) = -1 EPIPE (Broken pipe) The reason for this behaviour is that TIPC wrongly inverts error codes set in sk_err. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Phil Oester authored
In commit 90ba9b19 (tcp: tcp_make_synack() can use alloc_skb()), Eric changed the call to sock_wmalloc in tcp_make_synack to alloc_skb. In doing so, the netfilter owner match lost its ability to block the SYNACK packet on outbound listening sockets. Revert the change, restoring the owner match functionality. This closes netfilter bugzilla #847. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Lüssing authored
Currently we would still potentially suffer multicast packet loss if there is just either an IGMP or an MLD querier: For the former case, we would possibly drop IPv6 multicast packets, for the latter IPv4 ones. This is because we are currently assuming that if either an IGMP or MLD querier is present that the other one is present, too. This patch makes the behaviour and fix added in "bridge: disable snooping if there is no querier" (b00589af) to also work if there is either just an IGMP or an MLD querier on the link: It refines the deactivation of the snooping to be protocol specific by using separate timers for the snooped IGMP and MLD queries as well as separate timers for our internal IGMP and MLD queriers. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup fix from Tejun Heo: "During the percpu reference counting update which was merged during v3.11-rc1, the cgroup destruction path was updated so that a cgroup in the process of dying may linger on the children list, which was necessary as the cgroup should still be included in child/descendant iteration while percpu ref is being killed. Unfortunately, I forgot to update cgroup destruction path accordingly and cgroup destruction may fail spuriously with -EBUSY due to lingering dying children even when there's no live child left - e.g. "rmdir parent/child parent" will usually fail. This can be easily fixed by iterating through the children list to verify that there's no live child left. While this is very late in the release cycle, this bug is very visible to userland and I believe the fix is relatively safe. Thanks Hugh for spotting and providing fix for the issue" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix rmdir EBUSY regression in 3.11
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue fix from Tejun Heo: "This contains one fix which could lead to system-wide lockup on !PREEMPT kernels. It's very late in the cycle but this definitely is a -stable material. The problem is that workqueue worker tasks may process unlimited number of work items back-to-back without every yielding inbetween. This usually isn't noticeable but a work item which re-queues itself waiting for someone else to do something can deadlock with stop_machine. stop_machine will ensure nothing else happens on all other cpus and the requeueing work item will reqeueue itself indefinitely without ever yielding and thus preventing the CPU from entering stop_machine. Kudos to Jamie Liu for spotting and diagnosing the problem. This can be trivially fixed by adding cond_resched() after processing each work item" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: cond_resched() after processing each work item
-