In the VMX implementations of AES and AES modes, return -EINVAL when an
invalid key length is provided, rather than some unusual error code
determined via a series of additions.  This makes the behavior match the
other AES implementations in the kernel's crypto API.

Cc: Daniel Axtens <dja@axtens.net>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If the user-provided IV needs to be aligned to the algorithm's
alignmask, then skcipher_walk_virt() copies the IV into a new aligned
buffer walk.iv.  But skcipher_walk_virt() can fail afterwards, and then
if the caller unconditionally accesses walk.iv, it's a use-after-free.

xts-aes-neonbs doesn't set an alignmask, so currently it isn't affected
by this despite unconditionally accessing walk.iv.  However this is more
subtle than desired, and unconditionally accessing walk.iv has caused a
real problem in other algorithms.  Thus, update xts-aes-neonbs to start
checking the return value of skcipher_walk_virt().

Fixes: 1abee99e ("crypto: arm64/aes - reimplement bit-sliced ARM/NEON implementation for arm64")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If the user-provided IV needs to be aligned to the algorithm's
alignmask, then skcipher_walk_virt() copies the IV into a new aligned
buffer walk.iv.  But skcipher_walk_virt() can fail afterwards, and then
if the caller unconditionally accesses walk.iv, it's a use-after-free.

arm32 xts-aes-neonbs doesn't set an alignmask, so currently it isn't
affected by this despite unconditionally accessing walk.iv.  However
this is more subtle than desired, and it was actually broken prior to
the alignmask being removed by commit cc477bf6 ("crypto: arm/aes -
replace bit-sliced OpenSSL NEON code").  Thus, update xts-aes-neonbs to
start checking the return value of skcipher_walk_virt().

Fixes: e4e7f10b ("ARM: add support for bit sliced AES using NEON instructions")
Cc: <stable@vger.kernel.org> # v3.13+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If the user-provided IV needs to be aligned to the algorithm's
alignmask, then skcipher_walk_virt() copies the IV into a new aligned
buffer walk.iv.  But skcipher_walk_virt() can fail afterwards, and then
if the caller unconditionally accesses walk.iv, it's a use-after-free.

salsa20-generic doesn't set an alignmask, so currently it isn't affected
by this despite unconditionally accessing walk.iv.  However this is more
subtle than desired, and it was actually broken prior to the alignmask
being removed by commit b62b3db7 ("crypto: salsa20-generic - cleanup
and convert to skcipher API").

Since salsa20-generic does not update the IV and does not need any IV
alignment, update it to use req->iv instead of walk.iv.

Fixes: 2407d608 ("[CRYPTO] salsa20: Salsa20 stream cipher")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If the user-provided IV needs to be aligned to the algorithm's
alignmask, then skcipher_walk_virt() copies the IV into a new aligned
buffer walk.iv.  But skcipher_walk_virt() can fail afterwards, and then
if the caller unconditionally accesses walk.iv, it's a use-after-free.

Fix this in the LRW template by checking the return value of
skcipher_walk_virt().

This bug was detected by my patches that improve testmgr to fuzz
algorithms against their generic implementation.  When the extra
self-tests were run on a KASAN-enabled kernel, a KASAN use-after-free
splat occured during lrw(aes) testing.

Fixes: c778f96b ("crypto: lrw - Optimize tweak computation")
Cc: <stable@vger.kernel.org> # v4.20+
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/crypto/mxs-dcp.c: In function 'dcp_chan_thread_sha':
drivers/crypto/mxs-dcp.c:707:11: warning:
 variable 'fini' set but not used [-Wunused-but-set-variable]

It's not used since commit d80771c0 ("crypto: mxs-dcp - Fix wait
logic on chan threads"),so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

IS_ENABLED should be reserved for CONFIG_<FOO> uses so convert
the uses of IS_ENABLED with a #define to __is_defined.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In function caam_jr_dequeue(), a full memory barrier is used before
writing response job ring's register to signal removal of the completed
job. Therefore for writing the register, we do not need another write
memory barrier. Hence it is removed by replacing the call to wr_reg32()
with a newly defined function wr_reg32_relaxed().
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently, we free the psp_master if the PLATFORM_INIT fails during the
SEV FW probe. If psp_master is freed then driver does not invoke the PSP
FW. As per SEV FW spec, there are several commands (PLATFORM_RESET,
PLATFORM_STATUS, GET_ID etc) which can be executed in the UNINIT state
We should not free the psp_master when PLATFORM_INIT fails.

Fixes: 200664d5 ("crypto: ccp: Add SEV support")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Gary Hook <gary.hook@amd.com>
Cc: stable@vger.kernel.org # 4.19.y
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Change the wait condition to check if the hash is busy.
Context can be saved as soon as hash has finishing processing
data. Remove unused lock in the device structure.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This driver has been completely broken since the very beginning
because it doesn't even have a setkey function.  This means that
nobody has ever used it as it would crash during setkey.

This patch removes this driver.

Fixes: d293b640 ("crypto: mxc-scc - add basic driver for the...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a default quality to hw_random device to be
automatically set as new default entropy. Setting
random quality will decrease the crng init time by
switching to this hardware random source.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

No remove function implemented yet in the driver.
Without remove function, the pm_runtime implementation
complains when removing and probing again the driver.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a module parameter cryptomgr.panic_on_fail which causes the kernel
to panic if any crypto self-tests fail.

Use cases:

- More easily detect crypto self-test failures by boot testing,
  e.g. on KernelCI.
- Get a bug report if syzkaller manages to use the template system to
  instantiate an algorithm that fails its self-tests.

The command-line option "fips=1" already does this, but it also makes
other changes not wanted for general testing, such as disabling
"unapproved" algorithms.  panic_on_fail just does what it says.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

My patches to make testmgr fuzz algorithms against their generic
implementation detected that the arm64 implementations of "cbcmac(aes)"
handle empty messages differently from the cbcmac template.  Namely, the
arm64 implementations return the encrypted initial value, but the cbcmac
template returns the initial value directly.

This isn't actually a meaningful case because any user of cbcmac needs
to prepend the message length, as CCM does; otherwise it's insecure.
However, we should keep the behavior consistent; at the very least this
makes testing easier.

Do it the easy way, which is to change the arm64 implementations to have
the same behavior as the cbcmac template.

For what it's worth, ghash does things essentially the same way: it
returns its initial value when given an empty message, even though in
practice ghash is never passed an empty message.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

My patches to make testmgr fuzz algorithms against their generic
implementation detected that the arm64 implementations of
"cts(cbc(aes))" handle empty messages differently from the cts template.
Namely, the arm64 implementations forbids (with -EINVAL) all messages
shorter than the block size, including the empty message; but the cts
template permits empty messages as a special case.

No user should be CTS-encrypting/decrypting empty messages, but we need
to keep the behavior consistent.  Unfortunately, as noted in the source
of OpenSSL's CTS implementation [1], there's no common specification for
CTS.  This makes it somewhat debatable what the behavior should be.

However, all CTS specifications seem to agree that messages shorter than
the block size are not allowed, and OpenSSL follows this in both CTS
conventions it implements.  It would also simplify the user-visible
semantics to have empty messages no longer be a special case.

Therefore, make the cts template return -EINVAL on *all* messages
shorter than the block size, including the empty message.

[1] https://github.com/openssl/openssl/blob/master/crypto/modes/cts128.cSigned-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Don't cast the data buffer directly to streebog_uint512, as this
violates alignment rules.

Fixes: fe18957e ("crypto: streebog - add Streebog hash function")
Cc: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If the rfc7539 template is instantiated with specific implementations,
e.g. "rfc7539(chacha20-generic,poly1305-generic)" rather than
"rfc7539(chacha20,poly1305)", then the implementation names end up
included in the instance's cra_name.  This is incorrect because it then
prevents all users from allocating "rfc7539(chacha20,poly1305)", if the
highest priority implementations of chacha20 and poly1305 were selected.
Also, the self-tests aren't run on an instance allocated in this way.

Fix it by setting the instance's cra_name from the underlying
algorithms' actual cra_names, rather than from the requested names.
This matches what other templates do.

Fixes: 71ebc4d1 ("crypto: chacha20poly1305 - Add a ChaCha20-Poly1305 AEAD construction, RFC7539")
Cc: <stable@vger.kernel.org> # v4.2+
Cc: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

skcipher_walk_done() assumes it's a bug if, after the "slow" path is
executed where the next chunk of data is processed via a bounce buffer,
the algorithm says it didn't process all bytes.  Thus it WARNs on this.

However, this can happen legitimately when the message needs to be
evenly divisible into "blocks" but isn't, and the algorithm has a
'walksize' greater than the block size.  For example, ecb-aes-neonbs
sets 'walksize' to 128 bytes and only supports messages evenly divisible
into 16-byte blocks.  If, say, 17 message bytes remain but they straddle
scatterlist elements, the skcipher_walk code will take the "slow" path
and pass the algorithm all 17 bytes in the bounce buffer.  But the
algorithm will only be able to process 16 bytes, triggering the WARN.

Fix this by just removing the WARN_ON().  Returning -EINVAL, as the code
already does, is the right behavior.

This bug was detected by my patches that improve testmgr to fuzz
algorithms against their generic implementation.

Fixes: b286d8b1 ("crypto: skcipher - Add skcipher walk interface")
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The ->digest() method of crct10dif-pclmul reads the current CRC value
from the shash_desc context.  But this value is uninitialized, causing
crypto_shash_digest() to compute the wrong result.  Fix it.

Probably this wasn't noticed before because lib/crc-t10dif.c only uses
crypto_shash_update(), not crypto_shash_digest().  Likewise,
crypto_shash_digest() is not yet tested by the crypto self-tests because
those only test the ahash API which only uses shash init/update/final.

Fixes: 0b95a7f8 ("crypto: crct10dif - Glue code to cast accelerated CRCT10DIF assembly as a crypto transform")
Cc: <stable@vger.kernel.org> # v3.11+
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The ->digest() method of crct10dif-generic reads the current CRC value
from the shash_desc context.  But this value is uninitialized, causing
crypto_shash_digest() to compute the wrong result.  Fix it.

Probably this wasn't noticed before because lib/crc-t10dif.c only uses
crypto_shash_update(), not crypto_shash_digest().  Likewise,
crypto_shash_digest() is not yet tested by the crypto self-tests because
those only test the ahash API which only uses shash init/update/final.

This bug was detected by my patches that improve testmgr to fuzz
algorithms against their generic implementation.

Fixes: 2d31e518 ("crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework")
Cc: <stable@vger.kernel.org> # v3.11+
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/crypto/nx/nx-842.c: In function 'decompress':
drivers/crypto/nx/nx-842.c:356:25: warning: variable 'dpadding' set but not used [-Wunused-but-set-variable]
drivers/crypto/nx/nx-842-pseries.c: In function 'nx842_pseries_compress':
drivers/crypto/nx/nx-842-pseries.c:299:15: warning: variable 'max_sync_size' set but not used [-Wunused-but-set-variable]
drivers/crypto/nx/nx-842-pseries.c: In function 'nx842_pseries_decompress':
drivers/crypto/nx/nx-842-pseries.c:430:15: warning: variable 'max_sync_size' set but not used [-Wunused-but-set-variable]

They are not used any more and can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

'err' is set in err path, but it's not returned to callers.
Don't always return -EINPROGRESS, return err.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/crypto/marvell/hash.c: In function 'mv_cesa_ahash_pad_req':
drivers/crypto/marvell/hash.c:138:15: warning: variable 'index' set but not used [-Wunused-but-set-variable]

It's never used and can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use kmemdup rather than duplicating its implementation
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

cacheline_aligned is a special section. It cannot be const at the same
time because it's not read-only. It doesn't give any MMU protection.

Mark it ____cacheline_aligned to not place it in a special section,
but just align it in .rodata

Cc: herbert@gondor.apana.org.au
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Two per-CPU variables are allocated as pointer to per-CPU memory which
then are used as scratch buffers.
We could be smart about this and use instead a per-CPU struct which
contains the pointers already and then we need to allocate just the
scratch buffers.
Add a lock to the struct. By doing so we can avoid the get_cpu()
statement and gain lockdep coverage (if enabled) to ensure that the lock
is always acquired in the right context. On non-preemptible kernels the
lock vanishes.
It is okay to use raw_cpu_ptr() in order to get a pointer to the struct
since it is protected by the spinlock.

The diffstat of this is negative and according to size scompress.o:
   text    data     bss     dec     hex filename
   1847     160      24    2031     7ef dbg_before.o
   1754     232       4    1990     7c6 dbg_after.o
   1799      64      24    1887     75f no_dbg-before.o
   1703      88       4    1795     703 no_dbg-after.o

The overall size increase difference is also negative. The increase in
the data section is only four bytes without lockdep.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If scomp_acomp_comp_decomp() fails to allocate memory for the
destination then we never copy back the data we compressed.
It is probably best to return an error code instead 0 in case of
failure.
I haven't found any user that is using acomp_request_set_params()
without the `dst' buffer so there is probably no harm.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The current definition and implementation of the SEV_GET_ID command
does not provide the length of the unique ID returned by the firmware.
As per the firmware specification, the firmware may return an ID
length that is not restricted to 64 bytes as assumed by the SEV_GET_ID
command.

Introduce the SEV_GET_ID2 command to overcome with the SEV_GET_ID
limitations. Deprecate the SEV_GET_ID in the favor of SEV_GET_ID2.

At the same time update SEV API web link.

Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Nathaniel McCallum <npmccallum@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

create_caam_req_fq() doesn't return NULL pointers so there is no need to
check.  The NULL checks are problematic because it's hard to say how a
NULL return should be handled, so removing the checks is a nice cleanup.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Added rfc4106(gcm(aes)) cipher.
Signed-off-by: Nagadheeraj Rottela <rnagadheeraj@marvell.com>
Reviewed-by: Srikanth Jampala <jsrikanth@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Some i.MX6 devices (imx6D, imx6Q, imx6DL, imx6S, imx6DP and imx6DQ) have
an issue wherein AXI bus transactions may not occur in the correct order.
This isn't a problem running single descriptors, but can be if running
multiple concurrent descriptors. Reworking the CAAM driver to throttle
to single requests is impractical, so this patch limits the AXI pipeline
to a depth of one (from a default of 4) to preclude this situation from
occurring.
This patch applies to known affected platforms.
Signed-off-by: Radu Solea <radu.solea@nxp.com>
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In caam_jr_enqueue(), a write barrier is needed to order stores to job
ring slot before declaring addition of new job into input job ring.
The register write is done using wr_reg32() which internally uses
iowrite32() for write operation. The api iowrite32() issues a write
barrier before issuing write operation. Therefore, the wmb() preceding
wr_reg32() can be safely removed.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

For each job ring, the variable 'ringsize' is initialised but never
used. Similarly variables 'inp_ring_write_index' and 'head' always track
the same value and instead of 'inp_ring_write_index', caam_jr_enqueue()
can use 'head' itself. Both these variables have been removed.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

For each job ring pair, the output ring is processed exactly by one cpu
at a time under a tasklet context (one per ring). Therefore, there is no
need to protect a job ring's access & its private data structure using a
lock. Hence the lock can be removed.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix sparse warnings:

drivers/crypto/vmx/vmx.c:44:12: warning:
 symbol 'p8_init' was not declared. Should it be static?
drivers/crypto/vmx/vmx.c:70:13: warning:
 symbol 'p8_exit' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fixes: ccb778e1 ("crypto: api - Add fips_enable flag")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix sparse warning:

drivers/crypto/cavium/cpt/cptvf_main.c:644:6:
 warning: symbol 'cptvf_device_init' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

It's never used since introduction in commit
9d12ba86 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix following sparse warnings:

drivers/crypto/cavium/zip/zip_crypto.c:72:5: warning: symbol 'zip_ctx_init' was not declared. Should it be static?
drivers/crypto/cavium/zip/zip_crypto.c:110:6: warning: symbol 'zip_ctx_exit' was not declared. Should it be static?
drivers/crypto/cavium/zip/zip_crypto.c:122:5: warning: symbol 'zip_compress' was not declared. Should it be static?
drivers/crypto/cavium/zip/zip_crypto.c:158:5: warning: symbol 'zip_decompress' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>