- 19 Aug, 2011 1 commit
-
-
David Daney authored
In pcibios_get_phb_of_node(), we will crash while booting if bus->bridge->parent is NULL. Check for this case and avoid dereferencing the NULL pointer. Signed-off-by:
David Daney <david.daney@cavium.com> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org>
-
- 02 Aug, 2011 1 commit
-
-
Jon Mason authored
pcie_bus_configure_settings needs to be exported if the PCI hotplug driver is being compiled as a module. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Jon Mason <mason@myri.com> Signed-off-by:
-
- 01 Aug, 2011 29 commits
-
-
Ram Pai authored
a) adjust_resource_sorted() is now called reassign_resource_sorted() b) nice-to-have is now called optional c) add_list is now called realloc_list. Signed-off-by:
Ram Pai <linuxram@us.ibm.com> Signed-off-by:
-
Ram Pai authored
Allocate resources to cardbus bridge only after all other genuine resources requests are satisfied. Dont retry if resource allocation for cardbus-bridges fail. Signed-off-by:
-
Yinghai Lu authored
From: Yinghai Lu <yinghai@kernel.org> Allocate resources to SRIOV BARs only after all other required resource-requests are satisfied. Dont retry if resource allocation for SRIOV BARs fail. Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Ram Pai authored
Currently pci-bridges are allocated enough resources to satisfy their immediate requirements. Any additional resource-requests fail if additional free space, contiguous to the one already allocated, is not available. This behavior is not reasonable since sufficient contiguous resources, that can satisfy the request, are available at a different location. This patch provides the ability to expand and relocate a allocated resource. v2: Changelog: Fixed size calculation in pci_reassign_resource() v3: Changelog : Split this patch. The resource.c changes are already upstream. All the pci driver changes are in here. Signed-off-by:
-
Yinghai Lu authored
git commit c8adf9a3 "PCI: pre-allocate additional resources to devices only after successful allocation of essential resources." fails to take into consideration the optional-resources needed by children devices while calculating the optional-resource needed by the bridge. This can be a problem on some setup. For example, if a hotplug bridge has 8 children hotplug bridges, the bridge should have enough resources to accomodate the hotplug requirements for each of its children hotplug bridges. Currently this is not the case. This patch fixes the problem. Signed-off-by:
-
Jon Mason authored
On a given PCI-E fabric, each device, bridge, and root port can have a different PCI-E maximum payload size. There is a sizable performance boost for having the largest possible maximum payload size on each PCI-E device. However, if improperly configured, fatal bus errors can occur. Thus, it is important to ensure that PCI-E payloads sends by a device are never larger than the MPS setting of all devices on the way to the destination. This can be achieved two ways: - A conservative approach is to use the smallest common denominator of the entire tree below a root complex for every device on that fabric. This means for example that having a 128 bytes MPS USB controller on one leg of a switch will dramatically reduce performances of a video card or 10GE adapter on another leg of that same switch. It also means that any hierarchy supporting hotplug slots (including expresscard or thunderbolt I suppose, dbl check that) will have to be entirely clamped to 128 bytes since we cannot predict what will be plugged into those slots, and we cannot change the MPS on a "live" system. - A more optimal way is possible, if it falls within a couple of constraints: * The top-level host bridge will never generate packets larger than the smallest TLP (or if it can be controlled independently from its MPS at least) * The device will never generate packets larger than MPS (which can be configured via MRRS) * No support of direct PCI-E <-> PCI-E transfers between devices without some additional code to specifically deal with that case Then we can use an approach that basically ignores downstream requests and focuses exclusively on upstream requests. In that case, all we need to care about is that a device MPS is no larger than its parent MPS, which allows us to keep all switches/bridges to the max MPS supported by their parent and eventually the PHB. In this case, your USB controller would no longer "starve" your 10GE Ethernet and your hotplug slots won't affect your global MPS. Additionally, the hotplugged devices themselves can be configured to a larger MPS up to the value configured in the hotplug bridge. To choose between the two available options, two PCI kernel boot args have been added to the PCI calls. "pcie_bus_safe" will provide the former behavior, while "pcie_bus_perf" will perform the latter behavior. By default, the latter behavior is used. NOTE: due to the location of the enablement, each arch will need to add calls to this function. This patch only enables x86. This patch includes a number of changes recommended by Benjamin Herrenschmidt. Tested-by: Jordan_Hargrave@dell.com Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: CIFS: Cleanup demupltiplex thread exiting code CIFS: Move mid search to a separate function CIFS: Move RFC1002 check to a separate function CIFS: Simplify socket reading in demultiplex thread CIFS: Move buffer allocation to a separate function cifs: remove unneeded variable initialization in cifs_reconnect_tcon cifs: simplify refcounting for oplock breaks cifs: fix compiler warning in CIFSSMBQAllEAs cifs: fix name parsing in CIFSSMBQAllEAs cifs: don't start signing too early cifs: trivial: goto out here is unnecessary cifs: advertise the right receive buffer size to the server
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6: gpio_msm: Move Qualcomm MSM v2 gpio driver into drivers gpio_msm: Move Qualcomm v6 MSM driver into drivers msm: gpio: Fold register defs into C file msm: gpiomux: Move public API to public header msm: gpio: Remove ifdefs on gpio chip registers msm: gpio: Remove chip-specific register definitions msm: Remove chip-ifdefs for GPIO io mappings msm: gpio: Remove unsupported devices gpio: ab8500: fix MODULE_ALIAS for ab8500 of/gpio: export of_gpio_simple_xlate
-
git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds authored
* 'for-3.1-rc1' of git://gitorious.org/linux-omap-dss2/linux: (31 commits) OMAP: DSS2: HDMI: fix hdmi clock name HACK: OMAP: DSS2: clk hack for OMAP2/3 OMAP: DSS2: DSS: Fix context save/restore OMAP: DSS2: DISPC: Fix context save/restore OMAP: DSS2: Remove ctx loss count from dss.c OMAP: DSS2: Remove unused code from display.c OMAP: DSS2: DISPC: remove finegrained clk enables/disables OMAP: DSS2: Remove unused opt_clock_available OMAP: DSS2: Use PM runtime & HWMOD support OMAP: DSS2: Remove CONFIG_OMAP2_DSS_SLEEP_BEFORE_RESET OMAP: DSS2: Remove core_dump_clocks OMAP: DSS2: DPI: remove unneeded SYSCK enable/disable OMAP: DSS2: Use omap_pm_get_dev_context_loss_count to get ctx loss count OMAP: DSS2: rewrite use of context_loss_count OMAP: DSS2: Remove clk optimization at dss init OMAP: DSS2: Fix init and unit sequence OMAP: DSS2: Clean up probe for DSS & DSI OMAP: DSS2: Handle dpll4_m4_ck in dss_get/put_clocks OMAP: DSS2: Fix FIFO threshold and burst size for OMAP4 OMAP: DSS2: DSI: sync when disabling a display ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.xLinus Torvalds authored
* 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: (39 commits) SH: static should be at beginning of declaration sh: move CLKDEV_xxx_ID macro to sh_clk.h sh: clock-shx3: add CLKDEV_ICK_ID for cleanup sh: clock-sh7786: add CLKDEV_ICK_ID for cleanup sh: clock-sh7785: add CLKDEV_ICK_ID for cleanup sh: clock-sh7757: add CLKDEV_ICK_ID for cleanup sh: clock-sh7366: add CLKDEV_ICK_ID for cleanup sh: clock-sh7343: add CLKDEV_ICK_ID for cleanup sh: clock-sh7722: add CLKDEV_ICK_ID for cleanup sh: clock-sh7724: add CLKDEV_ICK_ID for cleanup sh: clock-sh7366: modify I2C clock settings sh: clock-sh7343: modify I2C clock settings sh: clock-sh7723: modify I2C clock settings sh: clock-sh7722: modify I2C clock settings sh: clock-sh7724: modify I2C clock settings serial: sh-sci: Fix up pretty name printing for port IRQs. serial: sh-sci: Kill off per-port enable/disable callbacks. serial: sh-sci: Add missing module description/author bits. serial: sh-sci: Regtype probing doesn't need to be fatal. sh: Tidy up pre-clkdev clk_get() error handling. ...
-
git://codeaurora.org/quic/kernel/davidb/linux-msmGrant Likely authored
Conflicts: drivers/gpio/Kconfig drivers/gpio/Makefile
-
Pavel Shilovsky authored
Reviewed-and-Tested-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by:
Steve French <sfrench@us.ibm.com>
-
Pavel Shilovsky authored
Reviewed-and-Tested-by:
-
Pavel Shilovsky authored
Reviewed-and-Tested-by:
-
Pavel Shilovsky authored
Move reading to separate function and remove csocket variable. Also change semantic in a little: goto incomplete_rcv only when we get -EAGAIN (or a familiar error) while reading rfc1002 header. In this case we don't check for echo timeout when we don't get whole header at once, as it was before. Reviewed-and-Tested-by:
-
Pavel Shilovsky authored
Reviewed-and-Tested-by:
-
David Brown authored
Migrate the driver for the v7-based MSM chips into drivers/gpio. The driver is unchanged, only moved. Change-Id: I810db5b50b71cdca4e869aa0d0310f7f48781a55 Signed-off-by:
David Brown <davidb@codeaurora.org> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Nicolas Pitre <nicolas.pitre@linaro.org>
-
David Brown authored
Migrate the driver for the v6-based MSM chips into drivers/gpio. The driver is unchanged, only moved. Change-Id: I03ba597b95b4d62b42da112a8efac88d67aa40f9 Signed-off-by:
-
David Brown authored
No need to have a separate header file containing only register definitions that are used by a single driver. Fold these into the gpio driver. Signed-off-by: -
David Brown authored
The gpiomux.h header contains some SOC ifdefs. However, the API that is actually used by the GPIO driver only uses two functions that are general. Move these general definitions into a public header file. Change-Id: Ia5df8af87dba268225598d56908e523bcfc24ef6 Signed-off-by:
-
David Brown authored
Select the GPIO register configuration at runtime rather than through idefs. Change-Id: I02ea0a3d61bc81669f32097c32420f0688552231 Signed-off-by:
-
David Brown authored
Put an SOC prefix on each GPIO register definition, eliminating the need to have SOC ifdefs around the definitions. Change-Id: I5a01fd328a89ce1be610847934d6e118f5465e42 Signed-off-by:
-
David Brown authored
The two GPIO controllers are always mapped to the same virtual address across all MSM devices. Instead of selecting this at compile time, determine the physical address at runtime, eliminating yet something else preventing multiple MSM targets from being compiled into the same kernel. Change-Id: I1672219d978ab6243526adeda6badf49472baa27 Signed-off-by:
-
David Brown authored
The MSM7x25 and MSM7x27 devices are not yet supported in the kernel. Remove #ifdef-based tables supporting these chips for now. Change-Id: I4d9f5abc4cc0942ce75a067097b072489493c1b8 Signed-off-by:
-
Tomi Valkeinen authored
The HDMI clock (hdmi_clk) is missing in the current OMAP4 HWMOD database. Fix this in the DSS driver by using the old clock name (dss_48mhz_clk). Signed-off-by:Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Tomi Valkeinen authored
The HWMOD data for OMAP2 and 3 are currently not up to date regarding DSS (OMAP4 HWMOD data is fine). This patch makes the DSS driver to get the opt clocks needed for OMAP2/3 with the old clock names, thus allowing DSS driver to use runtime PM. The HWMOD databases should be fixes ASAP, and this patch can be reverted after that. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds authored
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (46 commits) mfd: Fix mismatch in twl4030 mutex lock-unlock mfd: twl6030-pwm.c needs MODULE_LICENSE mfd: Fix the omap-usb-host clock API usage on usbhs_disable() mfd: Acknowledge WM8994 IRQs before reporting mfd: Acknowlege all WM831x IRQs before we handle them mfd: Avoid two assignments if failures happen in tps65910_i2c_probe regulator: Storing tps65912 error codes in u8 mfd: Don't leak init_data in tps65910_i2c_probe regulator: aat2870: Add AAT2870 regulator driver backlight: Add AAT2870 backlight driver mfd: Add AAT2870 mfd driver mfd: Remove dead code from max8997-irq mfd: Move TPS55910 Kconfig option mfd: Fix missing stmpe kerneldoc mfd: Fix off-by-one value range checking for tps65912_i2c_write mfd: Add devices for WM831x clocking module mfd: Remove comp{1,2}_threshold sysfs entries in tps65911_comparator_remove mfd: Don't ask about the TPS65912 core driver in Kconfig mfd: Fix off by one in WM831x IRQ code mfd: Add tps65921 support from twl-core ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/math-emu: Remove unnecessary code m68k/math-emu: Remove commented out old code m68k: Kill warning in setup_arch() when compiling for Sun3 m68k/atari: Prefix GPIO_{IN,OUT} with CODEC_ sparc: iounmap() and *_free_coherent() - Use lookup_resource() m68k/atari: Reserve some ST-RAM early on for device buffer use m68k/amiga: Chip RAM - Use lookup_resource() resources: Add lookup_resource() sparc: _sparc_find_resource() should check for exact matches m68k/amiga: Chip RAM - Offset resource end by CHIP_PHYSADDR m68k/amiga: Chip RAM - Use resource_size() to fix off-by-one error m68k/amiga: Chip RAM - Change chipavail to an atomic_t m68k/amiga: Chip RAM - Always allocate from the start of memory m68k/amiga: Chip RAM - Convert from printk() to pr_*() m68k/amiga: Chip RAM - Use tabs for indentation
-
Trond Myklebust authored
Fix two recently introduced compile problems: Fix a typo in fs/nfs/pnfs.h Move the pnfs_blksize declaration outside the CONFIG_NFS_V4 section in struct nfs_server. Reported-by:
Jens Axboe <jaxboe@fusionio.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 31 Jul, 2011 9 commits
-
-
Sanjeev Premi authored
A mutex is locked on entry into twl4030_madc_conversion(). Immediate return on some error conditions leaves the mutex locked. This patch ensures that mutex is always unlocked before leaving the function. Signed-off-by:
Sanjeev Premi <premi@ti.com> Cc: Keerthy <j-keerthy@ti.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Randy Dunlap authored
twl6030_pwm: module license 'unspecified' taints kernel. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Acked-by:
Hemanth V <hemanthv@ti.com> Acked-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Keshava Munegowda authored
usbhs_disable function was invoking clk_enable() instead of clk_disable(), thus only increasing the clock usage counter and preventing this particular clock from being ever turned off. Because of this, the power domain of omap4 the USB Host subsystem would never reach lower power states.This patch calls clk_disable() in usbhs_disable function Signed-off-by:
Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by:
-
Mark Brown authored
This ensures we never have a window where we've handled an interrupt but not told the hardware about it. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Mark Brown authored
Ensure that we never have a window where we've handled an interrupt (and therefore need to be notified of new events) but haven't yet told the interrupt controller that this is the case (so any new events will be discarded). Signed-off-by:
-
Jesper Juhl authored
In drivers/mfd/tps65910.c:tps65910_i2c_probe() there's potential for a tiny optimization. We assign to init_data->irq and init_data->irq_base long before we need them, and there are two potential exits from the function before they are needed. Moving the assignments below these two potential exits means we completely avoid doing them in these two (failure) cases. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Acked-by:
Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by:
-
Dan Carpenter authored
get_ctrl_reg() returns -EINVAL so the error handling won't work here if reg is a u8. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Jesper Juhl authored
There are a couple of situations where we leak init_data in drivers/mfd/tps65910.c:tps65910_i2c_probe() - this patch should take care of them. Signed-off-by:
-
Jin Park authored
Add regulator driver for AnalogicTech AAT2870. Signed-off-by:
Jin Park <jinyoungp@nvidia.com> Acked-by:
-
