commit f7d7f59a upstream.

Add the USB device ID for ELV Marble Sound Board 1.
Signed-off-by: Oliver Freyermuth <o.freyermuth@googlemail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit b0918d9f upstream.

udf_next_aext() just follows extent pointers while extents are marked as
indirect. This can loop forever for corrupted filesystem. Limit number
the of indirect extents we are willing to follow in a row.

[JK: Updated changelog, limit, style]
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Jan Kara <jack@suse.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 0eb1c3d4 upstream.

Combine the two quirks.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=109481Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit dbec6719 upstream.

The commit d7ba858a (ALSA: fm801: implement TEA575x tuner autodetection)
brings autodetection to the driver. However the autodetection algorithm misses
the TUNER_ONLY bit if it is supplied by the user.

Thus, user gets weird messages and no card registered.

 snd_fm801 0000:0d:01.0: detected TEA575x radio type SF64-PCR
 snd_fm801 0000:0d:01.0: AC'97 interface is busy (1)
 snd_fm801 0000:0d:01.0: AC'97 interface is busy (1)
...
 snd_fm801 0000:0d:01.0: AC'97 0 does not respond - RESET
 snd_fm801 0000:0d:01.0: AC'97 interface is busy (1)
 snd_fm801 0000:0d:01.0: AC'97 interface is busy (1)
 snd_fm801 0000:0d:01.0: AC'97 0 access is not valid [0x0], removing mixer.
 snd_fm801: probe of 0000:0d:01.0 failed with error -5

Do a copy of TUNER_ONLY bit to be applied after autodetection is done.

Fixes: d7ba858a (ALSA: fm801: implement TEA575x tuner autodetection)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit fb75a428 upstream.

If the proxy lock in the requeue loop acquires the rtmutex for a
waiter then it acquired also refcount on the pi_state related to the
futex, but the waiter side does not drop the reference count.

Add the missing free_pi_state() call.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <darren@dvhart.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Bhuvanesh_Surachari@mentor.com
Cc: Andy Lowe <Andy_Lowe@mentor.com>
Link: http://lkml.kernel.org/r/20151219200607.178132067@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit b70183db upstream.

Since it is possible for an external system to send oversize packets
at anytime, it is best for driver not to print a message and spam
the log (potential external DoS).

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=109471Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 81d7a329 upstream.

According to memory-barriers.txt, xchg*, cmpxchg* and their atomic_
versions all need to be fully ordered, however they are now just
RELEASE+ACQUIRE, which are not fully ordered.

So also replace PPC_RELEASE_BARRIER and PPC_ACQUIRE_BARRIER with
PPC_ATOMIC_ENTRY_BARRIER and PPC_ATOMIC_EXIT_BARRIER in
__{cmp,}xchg_{u32,u64} respectively to guarantee fully ordered semantics
of atomic{,64}_{cmp,}xchg() and {cmp,}xchg(), as a complement of commit
b97021f8 ("powerpc: Fix atomic_xxx_return barrier semantics")

This patch depends on patch "powerpc: Make value-returning atomics fully
ordered" for PPC_ATOMIC_ENTRY_BARRIER definition.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[bwh: backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 49e9cf3f upstream.

According to memory-barriers.txt:

> Any atomic operation that modifies some state in memory and returns
> information about the state (old or new) implies an SMP-conditional
> general memory barrier (smp_mb()) on each side of the actual
> operation ...

Which mean these operations should be fully ordered. However on PPC,
PPC_ATOMIC_ENTRY_BARRIER is the barrier before the actual operation,
which is currently "lwsync" if SMP=y. The leading "lwsync" can not
guarantee fully ordered atomics, according to Paul Mckenney:

https://lkml.org/lkml/2015/10/14/970

To fix this, we define PPC_ATOMIC_ENTRY_BARRIER as "sync" to guarantee
the fully-ordered semantics.

This also makes futex atomics fully ordered, which can avoid possible
memory ordering problems if userspace code relies on futex system call
for fully ordered semantics.

Fixes: b97021f8 ("powerpc: Fix atomic_xxx_return barrier semantics")
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit fcd5c4dd upstream.

EDAC workqueue destruction is really fragile. We cancel delayed work
but if it is still running and requeues itself, we still go ahead and
destroy the workqueue and the queued work explodes when workqueue core
attempts to run it.

Make the destruction more robust by switching op_state to offline so
that requeuing stops. Cancel any pending work *synchronously* too.

  EDAC i7core: Driver loaded.
  general protection fault: 0000 [#1] SMP
  CPU 12
  Modules linked in:
  Supported: Yes
  Pid: 0, comm: kworker/0:1 Tainted: G          IE   3.0.101-0-default #1 HP ProLiant DL380 G7
  RIP: 0010:[<ffffffff8107dcd7>]  [<ffffffff8107dcd7>] __queue_work+0x17/0x3f0
  < ... regs ...>
  Process kworker/0:1 (pid: 0, threadinfo ffff88019def6000, task ffff88019def4600)
  Stack:
   ...
  Call Trace:
   call_timer_fn
   run_timer_softirq
   __do_softirq
   call_softirq
   do_softirq
   irq_exit
   smp_apic_timer_interrupt
   apic_timer_interrupt
   intel_idle
   cpuidle_idle_call
   cpu_idle
  Code: ...
  RIP  __queue_work
   RSP <...>
Signed-off-by: Borislav Petkov <bp@suse.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 9b2761cb upstream.

The maximum chunks used by the function is
(SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE + 1).
The original commands array had space for
(SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE) commands.
When the last chunk is used (len > 4 * WSPI_MAX_CHUNK_SIZE), the last
command is stored outside the bounds of the commands array.

Oops 5 (page fault) is generated during current wl1271 firmware load
attempt:

root@debian-armhf:~# ifconfig wlan0 up
[  294.312399] Unable to handle kernel paging request at virtual address
00203fc4
[  294.320173] pgd = de528000
[  294.323028] [00203fc4] *pgd=00000000
[  294.326916] Internal error: Oops: 5 [#1] SMP ARM
[  294.331789] Modules linked in: bnep rfcomm bluetooth ipv6 arc4 wl12xx
wlcore mac80211 musb_dsps cfg80211 musb_hdrc usbcore usb_common
wlcore_spi omap_rng rng_core musb_am335x omap_wdt cpufreq_dt thermal_sys
hwmon
[  294.351838] CPU: 0 PID: 1827 Comm: ifconfig Not tainted
4.2.0-00002-g3e9ad27-dirty #78
[  294.360154] Hardware name: Generic AM33XX (Flattened Device Tree)
[  294.366557] task: dc9d6d40 ti: de550000 task.ti: de550000
[  294.372236] PC is at __spi_validate+0xa8/0x2ac
[  294.376902] LR is at __spi_sync+0x78/0x210
[  294.381200] pc : [<c049c760>]    lr : [<c049ebe0>]    psr: 60000013
[  294.381200] sp : de551998  ip : de5519d8  fp : 00200000
[  294.393242] r10: de551c8c  r9 : de5519d8  r8 : de3a9000
[  294.398730] r7 : de3a9258  r6 : de3a9400  r5 : de551a48  r4 :
00203fbc
[  294.405577] r3 : 00000000  r2 : 00000000  r1 : 00000000  r0 :
de3a9000
[  294.412420] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM
Segment user
[  294.419918] Control: 10c5387d  Table: 9e528019  DAC: 00000015
[  294.425954] Process ifconfig (pid: 1827, stack limit = 0xde550218)
[  294.432437] Stack: (0xde551998 to 0xde552000)

...

[  294.883613] [<c049c760>] (__spi_validate) from [<c049ebe0>]
(__spi_sync+0x78/0x210)
[  294.891670] [<c049ebe0>] (__spi_sync) from [<bf036598>]
(wl12xx_spi_raw_write+0xfc/0x148 [wlcore_spi])
[  294.901661] [<bf036598>] (wl12xx_spi_raw_write [wlcore_spi]) from
[<bf21c694>] (wlcore_boot_upload_firmware+0x1ec/0x458 [wlcore])
[  294.914038] [<bf21c694>] (wlcore_boot_upload_firmware [wlcore]) from
[<bf24532c>] (wl12xx_boot+0xc10/0xfac [wl12xx])
[  294.925161] [<bf24532c>] (wl12xx_boot [wl12xx]) from [<bf20d5cc>]
(wl1271_op_add_interface+0x5b0/0x910 [wlcore])
[  294.936364] [<bf20d5cc>] (wl1271_op_add_interface [wlcore]) from
[<bf15c4ac>] (ieee80211_do_open+0x44c/0xf7c [mac80211])
[  294.947963] [<bf15c4ac>] (ieee80211_do_open [mac80211]) from
[<c0537978>] (__dev_open+0xa8/0x110)
[  294.957307] [<c0537978>] (__dev_open) from [<c0537bf8>]
(__dev_change_flags+0x88/0x148)
[  294.965713] [<c0537bf8>] (__dev_change_flags) from [<c0537cd0>]
(dev_change_flags+0x18/0x48)
[  294.974576] [<c0537cd0>] (dev_change_flags) from [<c05a55a0>]
(devinet_ioctl+0x6b4/0x7d0)
[  294.983191] [<c05a55a0>] (devinet_ioctl) from [<c0517040>]
(sock_ioctl+0x1e4/0x2bc)
[  294.991244] [<c0517040>] (sock_ioctl) from [<c017d378>]
(do_vfs_ioctl+0x420/0x6b0)
[  294.999208] [<c017d378>] (do_vfs_ioctl) from [<c017d674>]
(SyS_ioctl+0x6c/0x7c)
[  295.006880] [<c017d674>] (SyS_ioctl) from [<c000f4c0>]
(ret_fast_syscall+0x0/0x54)
[  295.014835] Code: e1550004 e2444034 0a00007d e5953018 (e5942008)
[  295.021544] ---[ end trace 66ed188198f4e24e ]---
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 4eeac22c upstream.

In corner case for wl12xx_spi_raw_write() when
	len == SPI_AGGR_BUFFER_SIZE
we don't setup correctly spi transfer_list.
Next we will have garbage and strange errors
reported by SPI framework (eg. wrong speed_hz,
failed to transfer one message from queue)
when iterate transfer_list.
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Luciano Coelho <luca@coelho.fi>
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 17bc5586 upstream.

Free skb for received frames with a wrong checksum. This can happen
pretty rapidly, exhausting all memory.

This fixes a memleak (detected with kmemleak). Originally found while
using monitor mode, but it also appears during managed mode (once the
link is up).
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
ACKed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 1eaf35e4 upstream.

The module should fail to load.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: xhci_hcd_init() registers the PCI driver, so
 check before doing that rather than at the end of the function]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit dbb17a21 upstream.

Need to call this on resume if displays changes during
suspend in order to properly be notified of changes.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit de64aa9e upstream.

src_ssync_features field is only 1 byte large, and the 4th reserved area
is actually 8 bytes large.

Fixes: d1e1f4e4 ("mtd: nand: add support for reading ONFI parameters from NAND device")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 3a318426 upstream.

We check for overflow here, but we don't check for underflow so it
causes a static checker warning.

Fixes: fb9987d0 ('ath9k_htc: Support for AR9271 chipset.')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit aba2f06c upstream.

Poor #AC was so unimportant until a few days ago that we were
not even tracing its name correctly.  But now it's all over
the place.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 9dbe6cf9 upstream.

If we do not do this, it is not properly saved and restored across
migration.  Windows notices due to its self-protection mechanisms,
and is very upset about it (blue screen of death).

Cc: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[bwh: Backported to 3.2:
 - We didn't yet have the switch() in kvm_init_msr_list as MPX is not
   supported at all
 - Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit d282e2b3 upstream.

The initio driver has for many years had two copies of the
same module device table. One of them is also used for registering
the other driver, the other one is entirely useless after the
large scale cleanup that Alan Cox did back in 2007.

The compiler warns about this whenever the driver is built-in:

drivers/scsi/initio.c:131:29: warning: 'i91u_pci_devices' defined but not used [-Wunused-variable]

This removes the extraneous table and the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 72d39fea ("[SCSI] initio: Convert into a real Linux driver and update to modern style")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 2ff56fad upstream.

rc-main mistakenly uses #ifdef MODULE to determine whether it should
load the rc keymap modules.  This symbol is only defined if rc-main
is being built as a module itself, and bears no relation to whether
the rc keymaps are modules.

Fix this to use CONFIG_MODULES instead.

Fixes: 631493ec ("[media] rc-core: merge rc-map.c into rc-main.c")
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit c9d57de6 upstream.

When in FE_TUNE_MODE_ONESHOT the frontend must report
the actual capabilities so user can take appropriate
action.

With frontends that can't do auto inversion this is done
by dvb-core automatically so CAN_INVERSION_AUTO is valid.

However, when in FE_TUNE_MODE_ONESHOT this is not true.

So only set FE_CAN_INVERSION_AUTO in modes other than
FE_TUNE_MODE_ONESHOT
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit dcc7fdbe upstream.

v4l2-compliance sends a zeroed struct v4l2_streamparm in
v4l2-test-formats.cpp::testParmType(), and this results in a division by
0 in some gspca subdrivers:

  divide error: 0000 [#1] SMP
  Modules linked in: gspca_ov534 gspca_main ...
  CPU: 0 PID: 17201 Comm: v4l2-compliance Not tainted 4.3.0-rc2-ao2 #1
  Hardware name: System manufacturer System Product Name/M2N-E SLI, BIOS
    ASUS M2N-E SLI ACPI BIOS Revision 1301 09/16/2010
  task: ffff8800818306c0 ti: ffff880095c4c000 task.ti: ffff880095c4c000
  RIP: 0010:[<ffffffffa079bd62>]  [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534]
  RSP: 0018:ffff880095c4fce8  EFLAGS: 00010296
  RAX: 0000000000000000 RBX: ffff8800c9522000 RCX: ffffffffa077a140
  RDX: 0000000000000000 RSI: ffff880095e0c100 RDI: ffff8800c9522000
  RBP: ffff880095e0c100 R08: ffffffffa077a100 R09: 00000000000000cc
  R10: ffff880067ec7740 R11: 0000000000000016 R12: ffffffffa07bb400
  R13: 0000000000000000 R14: ffff880081b6a800 R15: 0000000000000000
  FS:  00007fda0de78740(0000) GS:ffff88012fc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000014630f8 CR3: 00000000cf349000 CR4: 00000000000006f0
  Stack:
   ffffffffa07a6431 ffff8800c9522000 ffffffffa077656e 00000000c0cc5616
   ffff8800c9522000 ffffffffa07a5e20 ffff880095e0c100 0000000000000000
   ffff880067ec7740 ffffffffa077a140 ffff880067ec7740 0000000000000016
  Call Trace:
   [<ffffffffa07a6431>] ? v4l_s_parm+0x21/0x50 [videodev]
   [<ffffffffa077656e>] ? vidioc_s_parm+0x4e/0x60 [gspca_main]
   [<ffffffffa07a5e20>] ? __video_do_ioctl+0x280/0x2f0 [videodev]
   [<ffffffffa07a5ba0>] ? video_ioctl2+0x20/0x20 [videodev]
   [<ffffffffa07a59b9>] ? video_usercopy+0x319/0x4e0 [videodev]
   [<ffffffff81182dc1>] ? page_add_new_anon_rmap+0x71/0xa0
   [<ffffffff811afb92>] ? mem_cgroup_commit_charge+0x52/0x90
   [<ffffffff81179b18>] ? handle_mm_fault+0xc18/0x1680
   [<ffffffffa07a15cc>] ? v4l2_ioctl+0xac/0xd0 [videodev]
   [<ffffffff811c846f>] ? do_vfs_ioctl+0x28f/0x480
   [<ffffffff811c86d4>] ? SyS_ioctl+0x74/0x80
   [<ffffffff8154a8b6>] ? entry_SYSCALL_64_fastpath+0x16/0x75
  Code: c7 93 d9 79 a0 5b 5d e9 f1 f3 9a e0 0f 1f 00 66 2e 0f 1f 84 00
    00 00 00 00 66 66 66 66 90 53 31 d2 48 89 fb 48 83 ec 08 8b 46 10 <f7>
    76 0c 80 bf ac 0c 00 00 00 88 87 4e 0e 00 00 74 09 80 bf 4f
  RIP  [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534]
   RSP <ffff880095c4fce8>
  ---[ end trace 279710c2c6c72080 ]---

Following what the doc says about a zeroed timeperframe (see
http://www.linuxtv.org/downloads/v4l-dvb-apis/vidioc-g-parm.html):

  ...
  To reset manually applications can just set this field to zero.

fix the issue by resetting the frame rate to a default value in case of
an unusable timeperframe.

The fix is done in the subdrivers instead of gspca.c because only the
subdrivers have notion of a default frame rate to reset the camera to.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
[bwh: Backported to 3.2: adjust filenames]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 18339f59 upstream.

Fixed HID descriptor for DragonRise Joystick.  Replaced default descriptor
which doubles Z axis and causes mixing values of X and Z axes.
Signed-off-by: Maciej Zuk <gzmlke@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit f7e7868b upstream.

Recently, i bought a blu-ray writer and noticed that while cdrecord
worked perfectly, random writing didn't work on rewritable bd-re media.
For example, dd if=/dev/zero of=/dev/sr0 bs=32768 count=2 gave the usual
"read-only file system" message.

After checking if the problem lies with my burner or firmware, i grep-ed
the kernel source for EROFS. One of the results was in the cdrom driver.

I tried to follow the function chain and ended in the cdrom_is_dvd_rw
function where writing is permitted only for DVD-RAM and DVD+RW media.
I added a new case label for 0x43 which is the profile name of BD-RE
and now it works correctly for BD-RE too.

Maybe there is a better way of implementing this, like a new function
checking for blu-ray support and called from cdrom_open_write like
it happens for mrw and dvdram media, but adding the case label worked.

Thank you for your time.
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit cdc5a311 upstream.

Adding Intel codename Lewisburg platform device IDs for SMBus.
Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 2b630df7 upstream.

Add missing entries into i2c-i801 documentation and Kconfig about recently
added Intel DNV and Broxton.
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit dd77f423 upstream.

This patch adds the SMBUS PCI ID of Intel Broxton.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 84d7f2eb upstream.

Intel DNV SoC has the same legacy SMBus host controller than Intel
Sunrisepoint PCH. It also has same iTCO watchdog on the bus.

Add DNV PCI ID to the list of supported devices.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
[bwh: Backported to 3.2: no FEATURE_IRQ or FEATURE_TCO here]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 3eee1799 upstream.
Signed-off-by: Devin Ryles <devin.ryles@intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 3e27a844 upstream.

This patch adds the I2C/SMBus Device IDs for the Intel Sunrise Point PCH.
Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 39e8e30e upstream.

The SMBus host controller is the same as used in Baytrail so add the new
PCI ID to the driver's list of supported IDs.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit b299de83 upstream.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit ce316110 upstream.

A long name broke the alignment, shift the columns a bit to fix it and
make the table look nice again. While we're here, switch to the
standard comment style to make checkpatch happy, and use tabs instead
of spaces for column alignment.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
[bwh: Backported to 3.2: "Interrupt processing" isn't mentioned]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 1b31e9b7 upstream.

Add Device ID of Intel BayTrail SMBus Controller.
Signed-off-by: Chew, Kean ho <kean.ho.chew@intel.com>
Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit afc65924 upstream.

This patch adds the SMBus Device IDs for the Intel Wildcat Point-LP PCH.
Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit f39901c1 upstream.

This patch adds the i801 SMBus Controller DeviceIDs for the Intel Coleto Creek PCH.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit a3fc0ff0 upstream.

This patch adds the SMBus Device IDs for the Intel Wellsburg PCH
Signed-off-by: James Ralston <james.d.ralston@intel.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Wolfram Sang <wolfram@the-dreams.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit c2db409c upstream.

This patch adds the PCU SMBus DeviceID for the Intel Avoton SOC.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 4d92f009 upstream.

This change was to preserve the ascending order of device IDs.
There was an exception with the first two Lewisburg device IDs to
keep all device IDs of the same kind grouped by code name.
Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com>
signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>