- 04 Apr, 2017 1 commit
-
-
Alban Crequy authored
When a kretprobe is installed on a kernel function, there is a maximum limit of how many calls in parallel it can catch (aka "maxactive"). A kernel module could call register_kretprobe() and initialize maxactive (see example in samples/kprobes/kretprobe_example.c). But that is not exposed to userspace and it is currently not possible to choose maxactive when writing to /sys/kernel/debug/tracing/kprobe_events The default maxactive can be as low as 1 on single-core with a non-preemptive kernel. This is too low and we need to increase it not only for recursive functions, but for functions that sleep or resched. This patch updates the format of the command that can be written to kprobe_events so that maxactive can be optionally specified. I need this for a bpf program attached to the kretprobe of inet_csk_accept, which can sleep for a long time. This patch includes a basic selftest: > # ./ftracetest -v test.d/kprobe/ > === Ftrace unit tests === > [1] Kprobe dynamic event - adding and removing [PASS] > [2] Kprobe dynamic event - busy event check [PASS] > [3] Kprobe dynamic event with arguments [PASS] > [4] Kprobes event arguments with types [PASS] > [5] Kprobe dynamic event with function tracer [PASS] > [6] Kretprobe dynamic event with arguments [PASS] > [7] Kretprobe dynamic event with maxactive [PASS] > > # of passed: 7 > # of failed: 0 > # of unresolved: 0 > # of untested: 0 > # of unsupported: 0 > # of xfailed: 0 > # of undefined(test bug): 0 BugLink: https://github.com/iovisor/bcc/issues/1072 Link: http://lkml.kernel.org/r/1491215782-15490-1-git-send-email-alban@kinvolk.ioAcked-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Alban Crequy <alban@kinvolk.io> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
- 03 Apr, 2017 1 commit
-
-
Steven Rostedt (VMware) authored
Relying on free_reserved_area() to call ftrace to free init memory proved to not be sufficient. The issue is that on x86, when debug_pagealloc is enabled, the init memory is not freed, but simply set as not present. Since ftrace was uninformed of this, starting function tracing still tries to update pages that are not present according to the page tables, causing ftrace to bug, as well as killing the kernel itself. Instead of relying on free_reserved_area(), have init/main.c call ftrace directly just before it frees the init memory. Then it needs to use __init_begin and __init_end to know where the init memory location is. Looking at all archs (and testing what I can), it appears that this should work for each of them. Reported-by:
kernel test robot <xiaolong.ye@intel.com> Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
- 31 Mar, 2017 5 commits
-
-
Steven Rostedt (VMware) authored
I noticed that if I use dd to read the set_ftrace_filter file that the first hash command is repeated. # cd /sys/kernel/debug/tracing # echo schedule > set_ftrace_filter # echo do_IRQ >> set_ftrace_filter # echo schedule:traceoff >> set_ftrace_filter # echo do_IRQ:traceoff >> set_ftrace_filter # cat set_ftrace_filter schedule do_IRQ schedule:traceoff:unlimited do_IRQ:traceoff:unlimited # dd if=set_ftrace_filter bs=1 schedule do_IRQ schedule:traceoff:unlimited schedule:traceoff:unlimited do_IRQ:traceoff:unlimited 98+0 records in 98+0 records out 98 bytes copied, 0.00265011 s, 37.0 kB/s This is due to the way t_start() calls t_next() as well as the seq_file calls t_next() and the state is slightly different between the two. Namely, t_start() will call t_next() with a local "pos" variable. By separating out the function listing from t_next() into its own function, we can have better control of outputting the functions and the hash of triggers. This simplifies the code. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
If all functions are enabled, there's a comment displayed in the file to denote that: # cd /sys/kernel/debug/tracing # cat set_ftrace_filter #### all functions enabled #### If a function trigger is set, those are displayed as well: # echo schedule:traceoff >> /debug/tracing/set_ftrace_filter # cat set_ftrace_filter #### all functions enabled #### schedule:traceoff:unlimited But if you read that file with dd, the output can change: # dd if=/debug/tracing/set_ftrace_filter bs=1 #### all functions enabled #### 32+0 records in 32+0 records out 32 bytes copied, 7.0237e-05 s, 456 kB/s This is because the "pos" variable is updated for the comment, but func_pos is not. "func_pos" is used by the triggers (or hashes) to know how many functions were printed and it bases its index from the pos - func_pos. func_pos should be 1 to count for the comment printed. But since it is not, t_hash_start() thinks that one trigger was already printed. The cat gets to t_hash_start() via t_next() and not t_start() which updates both pos and func_pos. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
The loop in t_start() of calling t_next() will call t_hash_start() if the pos is beyond the functions and enters the hash items. There's no reason to check if p is NULL and call t_hash_start(), as that would be redundant. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Instead of testing if the hash to use is the filter_hash or the notrace_hash at each iteration, do the test at open, and set the iter->hash to point to the corresponding filter or notrace hash. Then use that directly instead of testing which hash needs to be used each iteration. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
The return status check of __seq_open_private() is rather strange: iter = __seq_open_private(); if (iter) { /* do stuff */ } return iter ? 0 : -ENOMEM; It makes much more sense to do the return of failure right away: iter = __seq_open_private(); if (!iter) return -ENOMEM; /* do stuff */ return 0; This clean up will make updates to this code a bit nicer. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
- 28 Mar, 2017 1 commit
-
-
Steven Rostedt (VMware) authored
Moving enabling of function tracing to early boot, even before scheduling is enabled, means that it is not safe to enable interrupts. When function tracing was enabled at boot up, it use to happen after scheduling and the other CPUs were brought up. That required running a sync across all CPUs when modifying the function hook locations in the code. To do the synchronization, interrupts had to be enabled. Now function tracing can be started before the other CPUs are brought up, and enabling interrupts in that case is dangerous. As only tho boot CPU is active, there is no reason to run the synchronization. If the online CPU count is one, do not bother doing the synchronization. This removes the need to enable interrupts. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
- 25 Mar, 2017 4 commits
-
-
Steven Rostedt (VMware) authored
Currently trace_handle_return() looks like this: static inline enum print_line_t trace_handle_return(struct trace_seq *s) { return trace_seq_has_overflowed(s) ? TRACE_TYPE_PARTIAL_LINE : TRACE_TYPE_HANDLED; } Where trace_seq_overflowed(s) is: static inline bool trace_seq_has_overflowed(struct trace_seq *s) { return s->full || seq_buf_has_overflowed(&s->seq); } And seq_buf_has_overflowed(&s->seq) is: static inline bool seq_buf_has_overflowed(struct seq_buf *s) { return s->len > s->size; } Making trace_handle_return() into: return (s->full || (s->seq->len > s->seq->size)) ? TRACE_TYPE_PARTIAL_LINE : TRACE_TYPE_HANDLED; One would think this is not an issue to keep as an inline. But because this is used in the TRACE_EVENT() macro, it is extended for every tracepoint in the system. Taking a look at a single tracepoint x86_irq_vector (was the first one I randomly chosen). As trace_handle_return is used in the TRACE_EVENT() macro of trace_raw_output_##call() we disassemble trace_raw_output_x86_irq_vector and do a diff: - is the original + is the out-of-line code I removed identical lines that were different just due to different addresses. --- /tmp/irq-vec-orig 2017-03-16 09:12:48.569384851 -0400 +++ /tmp/irq-vec-ool 2017-03-16 09:13:39.378153385 -0400 @@ -6,27 +6,23 @@ 53 push %rbx 48 89 fb mov %rdi,%rbx 4c 8b a7 c0 20 00 00 mov 0x20c0(%rdi),%r12 e8 f7 72 13 00 callq ffffffff81155c80 <trace_raw_output_prep> 83 f8 01 cmp $0x1,%eax 74 05 je ffffffff8101e993 <trace_raw_output_x86_irq_vector+0x23> 5b pop %rbx 41 5c pop %r12 5d pop %rbp c3 retq 41 8b 54 24 08 mov 0x8(%r12),%edx - 48 8d bb 98 10 00 00 lea 0x1098(%rbx),%rdi + 48 81 c3 98 10 00 00 add $0x1098,%rbx - 48 c7 c6 7b 8a a0 81 mov $0xffffffff81a08a7b,%rsi + 48 c7 c6 ab 8a a0 81 mov $0xffffffff81a08aab,%rsi - e8 c5 85 13 00 callq ffffffff81156f70 <trace_seq_printf> === here's the start of the main difference === + 48 89 df mov %rbx,%rdi + e8 62 7e 13 00 callq ffffffff81156810 <trace_seq_printf> - 8b 93 b8 20 00 00 mov 0x20b8(%rbx),%edx - 31 c0 xor %eax,%eax - 85 d2 test %edx,%edx - 75 11 jne ffffffff8101e9c8 <trace_raw_output_x86_irq_vector+0x58> - 48 8b 83 a8 20 00 00 mov 0x20a8(%rbx),%rax - 48 39 83 a0 20 00 00 cmp %rax,0x20a0(%rbx) - 0f 93 c0 setae %al + 48 89 df mov %rbx,%rdi + e8 4a c5 12 00 callq ffffffff8114af00 <trace_handle_return> 5b pop %rbx - 0f b6 c0 movzbl %al,%eax === end === 41 5c pop %r12 5d pop %rbp c3 retq If you notice, the original has 22 bytes of text more than the out of line version. As this is for every TRACE_EVENT() defined in the system, this can become quite large. text data bss dec hex filename 8690305 5450490 1298432 15439227 eb957b vmlinux-orig 8681725 5450490 1298432 15430647 eb73f7 vmlinux-handle This change has a total of 8580 bytes in savings. $ objdump -dr /tmp/vmlinux-orig | grep '^[0-9a-f]* <trace_raw_output' | wc -l 324 That's 324 tracepoints. But this does not include modules (which contain many more tracepoints). For an allyesconfig build: $ objdump -dr vmlinux-allyes-orig | grep '^[0-9a-f]* <trace_raw_output' | wc -l 1401 That's 1401 tracepoints giving us: text data bss dec hex filename 137920629 140221067 53264384 331406080 13c0db00 vmlinux-allyes-orig 137827709 140221067 53264384 331313160 13bf7008 vmlinux-allyes-handle 92920 bytes in savings!!! Link: http://lkml.kernel.org/r/20170315021431.13107-2-andi@firstfloor.orgReported-by:
Andi Kleen <andi@firstfloor.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Adding a hook into free_reserve_area() that informs ftrace that boot up init text is being free, lets ftrace safely remove those init functions from its records, which keeps ftrace from trying to modify text that no longer exists. Note, this still does not allow for tracing .init text of modules, as modules require different work for freeing its init code. Link: http://lkml.kernel.org/r/1488502497.7212.24.camel@linux.intel.com Cc: linux-mm@kvack.org Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Requested-by:
Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Register the function tracer right after the tracing buffers are initialized in early boot up. This will allow function tracing to begin early if it is enabled via the kernel command line. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
As tracing can now be enabled very early in boot up, even before some critical system services (like scheduling), do not run the tracer selftests until after early_initcall() is performed. If a tracer is registered before such time, it is saved off in a list and the test is run when the system is able to handle more diverse functions. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
- 24 Mar, 2017 2 commits
-
-
Steven Rostedt (VMware) authored
Initialize the ftrace records immediately after memory initialization, as that is all that is required for the records to be created. This will allow for future work to get function tracing started earlier in the boot process. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Create an early_trace_init() function that will initialize the buffers and allow for ealier use of trace_printk(). This will also allow for future work to have function tracing start earlier at boot up. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
- 20 Mar, 2017 5 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
This BUG_ON() triggered for me once at shutdown, and I don't see a reason for the check. The code correctly checks whether the swap slot cache is usable or not, so an uninitialized swap slot cache is not actually problematic afaik. I've temporarily just switched the BUG_ON() to a WARN_ON_ONCE(), since I'm not sure why that seemingly pointless check was there. I suspect the real fix is to just remove it entirely, but for now we'll warn about it but not bring the machine down. Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull more powerpc fixes from Michael Ellerman: "A couple of minor powerpc fixes for 4.11: - wire up statx() syscall - don't print a warning on memory hotplug when HPT resizing isn't available Thanks to: David Gibson, Chandan Rajendra" * tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Don't give a warning when HPT resizing isn't available powerpc: Wire up statx() syscall
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: - Mikulas Patocka added support for R_PARISC_SECREL32 relocations in modules with CONFIG_MODVERSIONS. - Dave Anglin optimized the cache flushing for vmap ranges. - Arvind Yadav provided a fix for a potential NULL pointer dereference in the parisc perf code (and some code cleanups). - I wired up the new statx system call, fixed some compiler warnings with the access_ok() macro and fixed shutdown code to really halt a system at shutdown instead of crashing & rebooting. * 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix system shutdown halt parisc: perf: Fix potential NULL pointer dereference parisc: Avoid compiler warnings with access_ok() parisc: Wire up statx system call parisc: Optimize flush_kernel_vmap_range and invalidate_kernel_vmap_range parisc: support R_PARISC_SECREL32 relocation in modules
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "The bulk of the changes are in qla2xxx target driver code to address various issues found during Cavium/QLogic's internal testing (stable CC's included), along with a few other stability and smaller miscellaneous improvements. There are also a couple of different patch sets from Mike Christie, which have been a result of his work to use target-core ALUA logic together with tcm-user backend driver. Finally, a patch to address some long standing issues with pass-through SCSI export of TYPE_TAPE + TYPE_MEDIUM_CHANGER devices, which will make folks using physical (or virtual) magnetic tape happy" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (28 commits) qla2xxx: Update driver version to 9.00.00.00-k qla2xxx: Fix delayed response to command for loop mode/direct connect. qla2xxx: Change scsi host lookup method. qla2xxx: Add DebugFS node to display Port Database qla2xxx: Use IOCB interface to submit non-critical MBX. qla2xxx: Add async new target notification qla2xxx: Export DIF stats via debugfs qla2xxx: Improve T10-DIF/PI handling in driver. qla2xxx: Allow relogin to proceed if remote login did not finish qla2xxx: Fix sess_lock & hardware_lock lock order problem. qla2xxx: Fix inadequate lock protection for ABTS. qla2xxx: Fix request queue corruption. qla2xxx: Fix memory leak for abts processing qla2xxx: Allow vref count to timeout on vport delete. tcmu: Convert cmd_time_out into backend device attribute tcmu: make cmd timeout configurable tcmu: add helper to check if dev was configured target: fix race during implicit transition work flushes target: allow userspace to set state to transitioning target: fix ALUA transition timeout handling ...
-
- 19 Mar, 2017 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull device-dax fixes from Dan Williams: "The device-dax driver was not being careful to handle falling back to smaller fault-granularity sizes. The driver already fails fault attempts that are smaller than the device's alignment, but it also needs to handle the cases where a larger page mapping could be established. For simplicity of the immediate fix the implementation just signals VM_FAULT_FALLBACK until fault-size == device-alignment. One fix is for -stable to address pmd-to-pte fallback from the original implementation, another fix is for the new (introduced in 4.11-rc1) pud-to-pmd regression, and a typo fix comes along for the ride. These have received a build success notification from the kbuild robot" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: fix debug output typo device-dax: fix pud fault fallback handling device-dax: fix pmd/pte fault fallback handling
-
Himanshu Madhani authored
Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> signed-off-by:
Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Quinn Tran authored
Current driver wait for FW to be in the ready state before processing in-coming commands. For Arbitrated Loop or Point-to- Point (not switch), FW Ready state can take a while. FW will transition to ready state after all Nports have been logged in. In the mean time, certain initiators have completed the login and starts IO. Driver needs to start processing all queues if FW is already started. Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Quinn Tran authored
For target mode, when new scsi command arrive, driver first performs a look up of the SCSI Host. The current look up method is based on the ALPA portion of the NPort ID. For Cisco switch, the ALPA can not be used as the index. Instead, the new search method is based on the full value of the Nport_ID via btree lib. Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Himanshu Madhani authored
Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Quinn Tran authored
The Mailbox interface is currently over subscribed. We like to reserve the Mailbox interface for the chip managment and link initialization. Any non essential Mailbox command will be routed through the IOCB interface. The IOCB interface is able to absorb more commands. Following commands are being routed through IOCB interface - Get ID List (007Ch) - Get Port DB (0064h) - Get Link Priv Stats (006Dh) Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Quinn Tran authored
Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Anil Gurumurthy authored
Signed-off-by:
Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Quinn Tran authored
Add routines to support T10 DIF tag. Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Quinn Tran authored
If the remote port have started the login process, then the PLOGI and PRLI should be back to back. Driver will allow the remote port to complete the process. For the case where the remote port decide to back off from sending PRLI, this local port sets an expiration timer for the PRLI. Once the expiration time passes, the relogin retry logic is allowed to go through and perform login with the remote port. Signed-off-by:
Quinn Tran <quinn.tran@qlogic.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Quinn Tran authored
The main lock that needs to be held for CMD or TMR submission to upper layer is the sess_lock. The sess_lock is used to serialize cmd submission and session deletion. The addition of hardware_lock being held is not necessary. This patch removes hardware_lock dependency from CMD/TMR submission. Use hardware_lock only for error response in this case. Path1 CPU0 CPU1 ---- ---- lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&ha->hardware_lock)->rlock); lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&ha->hardware_lock)->rlock); Path2/deadlock *** DEADLOCK *** Call Trace: dump_stack+0x85/0xc2 print_circular_bug+0x1e3/0x250 __lock_acquire+0x1425/0x1620 lock_acquire+0xbf/0x210 _raw_spin_lock_irqsave+0x53/0x70 qlt_sess_work_fn+0x21d/0x480 [qla2xxx] process_one_work+0x1f4/0x6e0 Cc: <stable@vger.kernel.org> Cc: Bart Van Assche <Bart.VanAssche@sandisk.com> Reported-by:
Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Quinn Tran authored
Normally, ABTS is sent to Target Core as Task MGMT command. In the case of error, qla2xxx needs to send response, hardware_lock is required to prevent request queue corruption. Cc: <stable@vger.kernel.org> Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Quinn Tran authored
When FW notify driver or driver detects low FW resource, driver tries to send out Busy SCSI Status to tell Initiator side to back off. During the send process, the lock was not held. Cc: <stable@vger.kernel.org> Signed-off-by:
Quinn Tran <quinn.tran@qlogic.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Quinn Tran authored
Cc: <stable@vger.kernel.org> Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Joe Carnuccio authored
Cc: <stable@vger.kernel.org> Signed-off-by:
Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
- 18 Mar, 2017 6 commits
-
-
Nicholas Bellinger authored
Instead of putting cmd_time_out under ../target/core/user_0/foo/control, which has historically been used by parameters needed for initial backend device configuration, go ahead and move cmd_time_out into a backend device attribute. In order to do this, tcmu_module_init() has been updated to create a local struct configfs_attribute **tcmu_attrs, that is based upon the existing passthrough_attrib_attrs along with the new cmd_time_out attribute. Once **tcm_attrs has been setup, go ahead and point it at tcmu_ops->tb_dev_attrib_attrs so it's picked up by target-core. Also following MNC's previous change, ->cmd_time_out is stored in milliseconds but exposed via configfs in seconds. Also, note this patch restricts the modification of ->cmd_time_out to before + after the TCMU device has been configured, but not while it has active fabric exports. Cc: Mike Christie <mchristi@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Mike Christie authored
A single daemon could implement multiple types of devices using multuple types of real devices that may not support restarting from crashes and/or handling tcmu timeouts. This makes the cmd timeout configurable, so handlers that do not support it can turn if off for now. Signed-off-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Mike Christie authored
This adds a helper to check if the dev was configured. It will be used in the next patch to prevent updates to some config settings after the device has been setup. Signed-off-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
git://github.com/openrisc/linuxLinus Torvalds authored
Pull OpenRISC fixes from Stafford Horne: "OpenRISC fixes for build issues that were exposed by kbuild robots after 4.11 merge. All from allmodconfig builds. This includes: - bug in the handling of 8-byte get_user() calls - module build failure due to multile missing symbol exports" * tag 'openrisc-for-linus' of git://github.com/openrisc/linux: openrisc: Export symbols needed by modules openrisc: fix issue handling 8 byte get_user calls openrisc: xchg: fix `computed is not used` warning
-
Mike Christie authored
This fixes the following races: 1. core_alua_do_transition_tg_pt could have read tg_pt_gp_alua_access_state and gone into this if chunk: if (!explicit && atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) == ALUA_ACCESS_STATE_TRANSITION) { and then core_alua_do_transition_tg_pt_work could update the state. core_alua_do_transition_tg_pt would then only set tg_pt_gp_alua_pending_state and the tg_pt_gp_alua_access_state would not get updated with the second calls state. 2. core_alua_do_transition_tg_pt could be setting tg_pt_gp_transition_complete while the tg_pt_gp_transition_work is already completing. core_alua_do_transition_tg_pt then waits on the completion that will never be called. To handle these issues, we just call flush_work which will return when core_alua_do_transition_tg_pt_work has completed so there is no need to do the complete/wait. And, if core_alua_do_transition_tg_pt_work was running, instead of trying to sneak in the state change, we just schedule up another core_alua_do_transition_tg_pt_work call. Note that this does not handle a possible race where there are multiple threads call core_alua_do_transition_tg_pt at the same time. I think we need a mutex in target_tg_pt_gp_alua_access_state_store. Signed-off-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Mike Christie authored
Userspace target_core_user handlers like tcmu-runner may want to set the ALUA state to transitioning while it does implicit transitions. This patch allows that state when set from configfs. Signed-off-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-