Pull ARM SoC code updates from Arnd Bergmann:
 "This time there are only fairly minor cleanups across the i.MX,
  ixp4xx, ux500 and renesas platforms.

  The only notable update is a change to the keystone2 platform to
  switch switch it over to standard PSCI SMP bringup, which apparently
  was present in the shipped firmware almost from the start"

* tag 'soc-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: ixp4xx: Remove unused debug iomap
  MAINTAINERS: Add DHCOR to the DH electronic i.MX6 board support
  ARM: ixp4xx: Remove unused static map
  MAINTAINERS: adjust ARM/INTEL IXP4XX ARM ARCHITECTURE to ixp4xx clean-up
  ARM: imx3: Remove unneeded #include <linux/pinctrl/machine.h>
  ARM: mxs: Remove unneeded #include <linux/pinctrl/consumer.h>
  riscv: Kconfig.socs: Add ARCH_RENESAS kconfig option
  ARM: ux500: Drop unused register file
  ARM: ux500: do not directly dereference __iomem
  arm/mach-ux500: fix repeated words in comments
  arm64: renesas: Drop selecting GPIOLIB and PINCTRL
  ARM: shmobile: Drop selecting GPIOLIB and PINCTRL
  ARM: keystone: Replace platform SMP with PSCI
  soc: renesas: Kconfig: Explicitly select GPIOLIB and PINCTRL config under SOC_RENESAS

Pull ARM SoC defconfig updates from Arnd Bergmann:
 "This contains the ususal arm and arm64 updates to defconfig files,
  enabling newly added drivers and adapting the files to Kconfig
  changes, in particular for qualcomm, microchip, and nxp SoC platforms"

* tag 'soc-defconfig-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
  arm64: defconfig: Enable Qualcomm SM6115 / SM4250 GCC and Pinctrl
  arm64: defconfig: Enable Qualcomm SM6115 / SM4250 GCC and Pinctrl
  ARM: configs: multi_v7: switch to new MICROCHIP_ISC driver
  ARM: configs: sama5/7: switch to new MICROCHIP_ISC driver
  ARM: multi_v7_defconfig: enable Type-C UCSI and STM32G0 as modules
  arm64: defconfig: Enable Renesas R-Car S4-8 Spider Ethernet devices
  arm: configs: spear6xx: Enable PL110 display controller
  arm: configs: spear6xx: Refresh defconfig
  arm64: defconfig: Enable HTE config
  arm64: defconfig: Enable missing configs for mt8183-jacuzzi-juniper
  arm64: defconfig: Add Renesas 9-series PCIe clock generator
  riscv: configs: defconfig: Enable Renesas RZ/Five SoC
  ARM: imx_v6_v7_defconfig: Enable the cyttsp5 touchscreen
  arm64: defconfig: Enable Tegra186 timer support
  arm64: defconfig: build-in Qualcomm SC7180 and SM8450 interconnects
  arm64: defconfig: Enable Qualcomm QCE crypto
  arm64: defconfig: Enable TI_TFP410 DVI bridge
  ARM: configs: at91: sama7: add config for thermal management
  ARM: configs: at91: sama7: add config for microchip otpc
  ARM: configs: at91: sama7: use make savedefconfig
  ...

Pull arm64 updates from Will Deacon:
 "The highlights this time are support for dynamically enabling and
  disabling Clang's Shadow Call Stack at boot and a long-awaited
  optimisation to the way in which we handle the SVE register state on
  system call entry to avoid taking unnecessary traps from userspace.

  Summary:

  ACPI:
   - Enable FPDT support for boot-time profiling
   - Fix CPU PMU probing to work better with PREEMPT_RT
   - Update SMMUv3 MSI DeviceID parsing to latest IORT spec
   - APMT support for probing Arm CoreSight PMU devices

  CPU features:
   - Advertise new SVE instructions (v2.1)
   - Advertise range prefetch instruction
   - Advertise CSSC ("Common Short Sequence Compression") scalar
     instructions, adding things like min, max, abs, popcount
   - Enable DIT (Data Independent Timing) when running in the kernel
   - More conversion of system register fields over to the generated
     header

  CPU misfeatures:
   - Workaround for Cortex-A715 erratum #2645198

  Dynamic SCS:
   - Support for dynamic shadow call stacks to allow switching at
     runtime between Clang's SCS implementation and the CPU's pointer
     authentication feature when it is supported (complete with scary
     DWARF parser!)

  Tracing and debug:
   - Remove static ftrace in favour of, err, dynamic ftrace!
   - Seperate 'struct ftrace_regs' from 'struct pt_regs' in core ftrace
     and existing arch code
   - Introduce and implement FTRACE_WITH_ARGS on arm64 to replace the
     old FTRACE_WITH_REGS
   - Extend 'crashkernel=' parameter with default value and fallback to
     placement above 4G physical if initial (low) allocation fails

  SVE:
   - Optimisation to avoid disabling SVE unconditionally on syscall
     entry and just zeroing the non-shared state on return instead

  Exceptions:
   - Rework of undefined instruction handling to avoid serialisation on
     global lock (this includes emulation of user accesses to the ID
     registers)

  Perf and PMU:
   - Support for TLP filters in Hisilicon's PCIe PMU device
   - Support for the DDR PMU present in Amlogic Meson G12 SoCs
   - Support for the terribly-named "CoreSight PMU" architecture from
     Arm (and Nvidia's implementation of said architecture)

  Misc:
   - Tighten up our boot protocol for systems with memory above 52 bits
     physical
   - Const-ify static keys to satisty jump label asm constraints
   - Trivial FFA driver cleanups in preparation for v1.1 support
   - Export the kernel_neon_* APIs as GPL symbols
   - Harden our instruction generation routines against instrumentation
   - A bunch of robustness improvements to our arch-specific selftests
   - Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (151 commits)
  arm64: kprobes: Return DBG_HOOK_ERROR if kprobes can not handle a BRK
  arm64: kprobes: Let arch do_page_fault() fix up page fault in user handler
  arm64: Prohibit instrumentation on arch_stack_walk()
  arm64:uprobe fix the uprobe SWBP_INSN in big-endian
  arm64: alternatives: add __init/__initconst to some functions/variables
  arm_pmu: Drop redundant armpmu->map_event() in armpmu_event_init()
  kselftest/arm64: Allow epoll_wait() to return more than one result
  kselftest/arm64: Don't drain output while spawning children
  kselftest/arm64: Hold fp-stress children until they're all spawned
  arm64/sysreg: Remove duplicate definitions from asm/sysreg.h
  arm64/sysreg: Convert ID_DFR1_EL1 to automatic generation
  arm64/sysreg: Convert ID_DFR0_EL1 to automatic generation
  arm64/sysreg: Convert ID_AFR0_EL1 to automatic generation
  arm64/sysreg: Convert ID_MMFR5_EL1 to automatic generation
  arm64/sysreg: Convert MVFR2_EL1 to automatic generation
  arm64/sysreg: Convert MVFR1_EL1 to automatic generation
  arm64/sysreg: Convert MVFR0_EL1 to automatic generation
  arm64/sysreg: Convert ID_PFR2_EL1 to automatic generation
  arm64/sysreg: Convert ID_PFR1_EL1 to automatic generation
  arm64/sysreg: Convert ID_PFR0_EL1 to automatic generation
  ...

Pull microblaze updates from Michal Simek:
 "Clean up PCI support which was pretty much copied and pasted from
  PowerPC long time ago for one custom platform which is not available
  for years.

  Also, the Xilinx/AMD PCIe team tested Microblaze with IP cores also
  used on ARM SOCs and clean up Microblaze code"

* tag 'microblaze-v6.2' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze/PCI: Moving PCI iounmap and dependent code
  microblaze/PCI: Remove support for Xilinx PCI host bridge
  microblaze/PCI: Remove unused pci_iobar_pfn() and et al declarations
  microblaze/PCI: Remove unused sys_pciconfig_iobase() and et al declaration
  microblaze/PCI: Remove unused pci_address_to_pio() conversion of CPU address to I/O port
  microblaze/PCI: Remove unused PCI Indirect ops
  microblaze/PCI: Remove unused PCI BIOS resource allocation
  microblaze/PCI: Remove unused allocation & free of PCI host bridge structure
  microblaze/PCI: Remove unused device tree parsing for a host bridge resources
  microblaze/PCI: Remove unused PCI legacy IO's access on a bus
  microblaze/PCI: Remove unused PCI bus scan if configured as a host
  microblaze/PCI: Remove Null PCI config access unused functions
  microblaze/PCI: Remove unused early_read_config_byte() et al declarations

Merge tag 'hyperv-next-signed-20221208' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv updates from Wei Liu:

 - Drop unregister syscore from hyperv_cleanup to avoid hang (Gaurav
   Kohli)

 - Clean up panic path for Hyper-V framebuffer (Guilherme G. Piccoli)

 - Allow IRQ remapping to work without x2apic (Nuno Das Neves)

 - Fix comments (Olaf Hering)

 - Expand hv_vp_assist_page definition (Saurabh Sengar)

 - Improvement to page reporting (Shradha Gupta)

 - Make sure TSC clocksource works when Linux runs as the root partition
   (Stanislav Kinsburskiy)

* tag 'hyperv-next-signed-20221208' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  x86/hyperv: Remove unregister syscore call from Hyper-V cleanup
  iommu/hyper-v: Allow hyperv irq remapping without x2apic
  clocksource: hyper-v: Add TSC page support for root partition
  clocksource: hyper-v: Use TSC PFN getter to map vvar page
  clocksource: hyper-v: Introduce TSC PFN getter
  clocksource: hyper-v: Introduce a pointer to TSC page
  x86/hyperv: Expand definition of struct hv_vp_assist_page
  PCI: hv: update comment in x86 specific hv_arch_irq_unmask
  hv: fix comment typo in vmbus_channel/low_latency
  drivers: hv, hyperv_fb: Untangle and refactor Hyper-V panic notifiers
  video: hyperv_fb: Avoid taking busy spinlock on panic path
  hv_balloon: Add support for configurable order free page reporting
  mm/page_reporting: Add checks for page_reporting_order param

Pull tpm updates from Jarkko Sakkinen:
 "A random collection of TPM fixes and one bug fix for trusted keys"

* tag 'tpmdd-next-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: st33zp24: remove pointless checks on probe
  tpm/tpm_crb: Fix error message in __crb_relinquish_locality()
  tpm/tpm_ftpm_tee: Fix error handling in ftpm_mod_init()
  tpm: tpm_tis: Add the missed acpi_put_table() to fix memory leak
  tpm: tpm_crb: Add the missed acpi_put_table() to fix memory leak
  tpm: acpi: Call acpi_put_table() to fix memory leak
  tpm: Add flag to use default cancellation policy
  tpm: tis_i2c: Fix sanity check interrupt enable mask
  KEYS: trusted: tee: Make registered shm dependency explicit
  tpm: Avoid function type cast of put_device()
  tpm: st33zp24: switch to using gpiod API
  tpm: st33zp24: drop support for platform data

Pull slab updates from Vlastimil Babka:

 - SLOB deprecation and SLUB_TINY

   The SLOB allocator adds maintenance burden and stands in the way of
   API improvements [1]. Deprecate it by renaming the config option (to
   make users notice) to CONFIG_SLOB_DEPRECATED with updated help text.
   SLUB should be used instead as SLAB will be the next on the removal
   list.

   Based on reports from a riscv k210 board with 8MB RAM, add a
   CONFIG_SLUB_TINY option to minimize SLUB's memory usage at the
   expense of scalability. This has resolved the k210 regression [2] so
   in case there are no others (that wouldn't be resolvable by further
   tweaks to SLUB_TINY) plan is to remove SLOB in a few cycles.

   Existing defconfigs with CONFIG_SLOB are converted to
   CONFIG_SLUB_TINY.

 - kmalloc() slub_debug redzone improvements

   A series from Feng Tang that builds on the tracking or requested size
   for kmalloc() allocations (for caches with debugging enabled) added
   in 6.1, to make redzone checks consider the requested size and not
   the rounded up one, in order to catch more subtle buffer overruns.
   Includes new slub_kunit test.

 - struct slab fields reordering to accomodate larger rcu_head

   RCU folks would like to grow rcu_head with debugging options, which
   breaks current struct slab layout's assumptions, so reorganize it to
   make this possible.

 - Miscellaneous improvements/fixes:
     - __alloc_size checking compiler workaround (Kees Cook)
     - Optimize and cleanup SLUB's sysfs init (Rasmus Villemoes)
     - Make SLAB compatible with PROVE_RAW_LOCK_NESTING (Jiri Kosina)
     - Correct SLUB's percpu allocation estimates (Baoquan He)
     - Re-enableS LUB's run-time failslab sysfs control (Alexander Atanasov)
     - Make tools/vm/slabinfo more user friendly when not run as root (Rong Tao)
     - Dead code removal in SLUB (Hyeonggon Yoo)

* tag 'slab-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (31 commits)
  mm, slob: rename CONFIG_SLOB to CONFIG_SLOB_DEPRECATED
  mm, slub: don't aggressively inline with CONFIG_SLUB_TINY
  mm, slub: remove percpu slabs with CONFIG_SLUB_TINY
  mm, slub: split out allocations from pre/post hooks
  mm/slub, kunit: Add a test case for kmalloc redzone check
  mm/slub, kunit: add SLAB_SKIP_KFENCE flag for cache creation
  mm, slub: refactor free debug processing
  mm, slab: ignore SLAB_RECLAIM_ACCOUNT with CONFIG_SLUB_TINY
  mm, slub: don't create kmalloc-rcl caches with CONFIG_SLUB_TINY
  mm, slub: lower the default slub_max_order with CONFIG_SLUB_TINY
  mm, slub: retain no free slabs on partial list with CONFIG_SLUB_TINY
  mm, slub: disable SYSFS support with CONFIG_SLUB_TINY
  mm, slub: add CONFIG_SLUB_TINY
  mm, slab: ignore hardened usercopy parameters when disabled
  slab: Remove special-casing of const 0 size allocations
  slab: Clean up SLOB vs kmalloc() definition
  mm/sl[au]b: rearrange struct slab fields to allow larger rcu_head
  mm/migrate: make isolate_movable_page() skip slab pages
  mm/slab: move and adjust kernel-doc for kmem_cache_alloc
  mm/slub, percpu: correct the calculation of early percpu allocation size
  ...

Pull printk updates from Petr Mladek:

 - Add NMI-safe SRCU reader API. It uses atomic_inc() instead of
   this_cpu_inc() on strong load-store architectures.

 - Introduce new console_list_lock to synchronize a manipulation of the
   list of registered consoles and their flags.

   This is a first step in removing the big-kernel-lock-like behavior of
   console_lock(). This semaphore still serializes console->write()
   calbacks against:

      - each other. It primary prevents potential races between early
        and proper console drivers using the same device.

      - suspend()/resume() callbacks and init() operations in some
        drivers.

      - various other operations in the tty/vt and framebufer
        susbsystems. It is likely that console_lock() serializes even
        operations that are not directly conflicting with the
        console->write() callbacks here. This is the most complicated
        big-kernel-lock aspect of the console_lock() that will be hard
        to untangle.

 - Introduce new console_srcu lock that is used to safely iterate and
   access the registered console drivers under SRCU read lock.

   This is a prerequisite for introducing atomic console drivers and
   console kthreads. It will reduce the complexity of serialization
   against normal consoles and console_lock(). Also it should remove the
   risk of deadlock during critical situations, like Oops or panic, when
   only atomic consoles are registered.

 - Check whether the console is registered instead of enabled on many
   locations. It was a historical leftover.

 - Cleanly force a preferred console in xenfb code instead of a dirty
   hack.

 - A lot of code and comment clean ups and improvements.

* tag 'printk-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (47 commits)
  printk: htmldocs: add missing description
  tty: serial: sh-sci: use setup() callback for early console
  printk: relieve console_lock of list synchronization duties
  tty: serial: kgdboc: use console_list_lock to trap exit
  tty: serial: kgdboc: synchronize tty_find_polling_driver() and register_console()
  tty: serial: kgdboc: use console_list_lock for list traversal
  tty: serial: kgdboc: use srcu console list iterator
  proc: consoles: use console_list_lock for list iteration
  tty: tty_io: use console_list_lock for list synchronization
  printk, xen: fbfront: create/use safe function for forcing preferred
  netconsole: avoid CON_ENABLED misuse to track registration
  usb: early: xhci-dbc: use console_is_registered()
  tty: serial: xilinx_uartps: use console_is_registered()
  tty: serial: samsung_tty: use console_is_registered()
  tty: serial: pic32_uart: use console_is_registered()
  tty: serial: earlycon: use console_is_registered()
  tty: hvc: use console_is_registered()
  efi: earlycon: use console_is_registered()
  tty: nfcon: use console_is_registered()
  serial_core: replace uart_console_enabled() with uart_console_registered()
  ...

Pull file locking updates from Jeff Layton:
 "The main change here is to add the new locks_inode_context helper, and
  convert all of the places that dereference inode->i_flctx directly to
  use that instead.

  There is a new helper to indicate whether any locks are held on an
  inode. This is mostly for Ceph but may be usable elsewhere too.

  Andi Kleen requested that we print the PID when the LOCK_MAND warning
  fires, to help track down applications trying to use it.

  Finally, we added some new warnings to some of the file locking
  functions that fire when the ->fl_file and filp arguments differ. This
  helped us find some long-standing bugs in lockd. Patches for those are
  in Chuck Lever's tree and should be in his v6.2 PR. After that patch,
  people using NFSv2/v3 locking may see some warnings fire until those
  go in.

  Happy Holidays!"

* tag 'locks-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  Add process name and pid to locks warning
  nfsd: use locks_inode_context helper
  nfs: use locks_inode_context helper
  lockd: use locks_inode_context helper
  ksmbd: use locks_inode_context helper
  cifs: use locks_inode_context helper
  ceph: use locks_inode_context helper
  filelock: add a new locks_inode_context accessor function
  filelock: new helper: vfs_inode_has_locks
  filelock: WARN_ON_ONCE when ->fl_file and filp don't match

Pull execve updates from Kees Cook:
 "Most are small refactorings and bug fixes, but three things stand out:
  switching timens (which got reverted before) looks solid now,
  FOLL_FORCE has been removed (no failures seen yet across several weeks
  in -next), and some whitespace cleanups (which are long overdue).

   - Add timens support (when switching mm). This version has survived
     in -next for the entire cycle (Andrei Vagin)

   - Various small bug fixes, refactoring, and readability improvements
     (Bernd Edlinger, Rolf Eike Beer, Bo Liu, Li Zetao Liu Shixin)

   - Remove FOLL_FORCE for stack setup (Kees Cook)

   - Whitespace cleanups (Rolf Eike Beer, Kees Cook)"

* tag 'execve-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  binfmt_misc: fix shift-out-of-bounds in check_special_flags
  binfmt: Fix error return code in load_elf_fdpic_binary()
  exec: Remove FOLL_FORCE for stack setup
  binfmt_elf: replace IS_ERR() with IS_ERR_VALUE()
  binfmt_elf: simplify error handling in load_elf_phdrs()
  binfmt_elf: fix documented return value for load_elf_phdrs()
  exec: simplify initial stack size expansion
  binfmt: Fix whitespace issues
  exec: Add comments on check_unsafe_exec() fs counting
  ELF uapi: add spaces before '{'
  selftests/timens: add a test for vfork+exit
  fs/exec: switch timens when a task gets a new mm

Pull seccomp updates from Kees Cook:

 - Add missing kerndoc parameter (Randy Dunlap)

 - Improve seccomp selftest to check CAP_SYS_ADMIN (Gautam Menghani)

 - Fix allocation leak when cloned thread immediately dies (Kuniyuki
   Iwashima)

* tag 'seccomp-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  seccomp: document the "filter_count" field
  seccomp: Move copy_seccomp() to no failure path.
  selftests/seccomp: Check CAP_SYS_ADMIN capability in the test mode_filter_without_nnp

Pull pstore updates from Kees Cook:
 "A small collection of bug fixes, refactorings, and general
  improvements:

   - Reporting improvements and return path fixes (Guilherme G. Piccoli,
     Wang Yufen, Kees Cook)

   - Clean up kmsg_bytes module parameter usage (Guilherme G. Piccoli)

   - Add Guilherme to pstore MAINTAINERS entry

   - Choose friendlier allocation flags (Qiujun Huang, Stephen Boyd)"

* tag 'pstore-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP
  pstore/ram: Fix error return code in ramoops_probe()
  pstore: Alert on backend write error
  MAINTAINERS: Update pstore maintainers
  pstore/ram: Set freed addresses to NULL
  pstore/ram: Move internal definitions out of kernel-wide include
  pstore/ram: Move pmsg init earlier
  pstore/ram: Consolidate kfree() paths
  efi: pstore: Follow convention for the efi-pstore backend name
  pstore: Inform unregistered backend names as well
  pstore: Expose kmsg_bytes as a module parameter
  pstore: Improve error reporting in case of backend overlap
  pstore/zone: Use GFP_ATOMIC to allocate zone buffer

Merge tag 'unsigned-char-6.2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/zx2c4/linux

Pull unsigned-char conversion from Jason Donenfeld:
 "Enable -funsigned-char and fix code affected by that flag.

  During the 6.1 cycle, several patches already made it into the tree,
  which were for code that was already broken on at least one
  architecture, where the naked char had a different sign than the code
  author anticipated, or were part of some bug fix for an existing bug
  that this initiative unearthed.

  These 6.1-era fixes are:

    64806090 ("MIPS: pic32: treat port as signed integer")
    5c26159c ("ipvs: use explicitly signed chars")
    e6cb8769 ("wifi: airo: do not assign -1 to unsigned char")
    937ec9f7 ("staging: rtl8192e: remove bogus ssid character sign test")
    67704738 ("misc: sgi-gru: use explicitly signed char")
    50895a55 ("ALSA: rme9652: use explicitly signed char")
    ee03c0f2 ("ALSA: au88x0: use explicitly signed char")
    835bed1b ("fbdev: sisfb: use explicitly signed char")
    50f19697 ("parisc: Use signed char for hardware path in pdc.h")
    66063033 ("wifi: rt2x00: use explicitly signed or unsigned types")

  Regarding patches in this pull:

   - There is one patch in this pull that should have made it to you
     during 6.1 ("media: stv0288: use explicitly signed char"), but the
     maintainer was MIA during the cycle, so it's in here instead.

   - Two patches fix single architecture code affected by unsigned char
     ("perf/x86: Make struct p4_event_bind::cntr signed array" and
     "sparc: sbus: treat CPU index as integer"), while one patch fixes
     an unused typedef, in case it's ever used in the future ("media:
     atomisp: make hive_int8 explictly signed").

   - Finally, there's the change to actually enable -funsigned-char
     ("kbuild: treat char as always unsigned") and then the removal of
     some no longer useful !__CHAR_UNSIGNED__ selftest code ("lib:
     assume char is unsigned").

  The various fixes were found with a combination of diffing objdump
  output, a large variety of Coccinelle scripts, and plain old grep. In
  the end, things didn't seem as bad as I feared they would. But of
  course, it's also possible I missed things.

  However, this has been in linux-next for basically an entire cycle
  now, so I'm not overly worried. I've also been daily driving this on
  my laptop for all of 6.1. Still, this series, and the ones sent for
  6.1 don't total in quantity to what I thought it'd be, so I will be on
  the lookout for breakage.

  We could receive a few reports that are quickly fixable. Hopefully we
  won't receive a barrage of reports that would result in a revert. And
  just maybe we won't receive any reports at all and nobody will even
  notice. Knock on wood"

* tag 'unsigned-char-6.2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/zx2c4/linux:
  lib: assume char is unsigned
  kbuild: treat char as always unsigned
  media: atomisp: make hive_int8 explictly signed
  media: stv0288: use explicitly signed char
  sparc: sbus: treat CPU index as integer
  perf/x86: Make struct p4_event_bind::cntr signed array

Pull nolibc updates from Paul McKenney:

 - Further improvements to nolibc testing

* tag 'nolibc.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  selftests/nolibc: Always rebuild the sysroot when running a test
  selftests/nolibc: Add 7 tests for memcmp()

Pull KCSAN updates from Paul McKenney:

 - Add instrumentation for memcpy(), memset(), and memmove() for Clang
   v16+'s new function names that are used when the -fsanitize=thread
   argument is given

 - Fix objtool warnings from KCSAN's volatile instrumentation, and typos
   in a pair of Kconfig options' help clauses

* tag 'kcsan.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  kcsan: Fix trivial typo in Kconfig help comments
  objtool, kcsan: Add volatile read/write instrumentation to whitelist
  kcsan: Instrument memcpy/memset/memmove with newer Clang

Pull kernel memory model documentation updates from Paul McKenney:

 - Update the LKMM documentation, both in English and in Korean

* tag 'lkmm.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  docs/memory-barriers.txt/kokr: Fix confusing name of 'data dependency barrier'
  docs/memory-barriers.txt/kokr: Add memory barrier dma_mb()
  docs/memory-barriers.txt/kokr: introduce io_stop_wc() and add implementation for ARM64
  docs/memory-barriers.txt: Add a missed closing parenthesis
  tools/memory-model: Weaken ctrl dependency definition in explanation.txt

Pull RCU updates from Paul McKenney:

 - Documentation updates. This is the second in a series from an ongoing
   review of the RCU documentation.

 - Miscellaneous fixes.

 - Introduce a default-off Kconfig option that depends on RCU_NOCB_CPU
   that, on CPUs mentioned in the nohz_full or rcu_nocbs boot-argument
   CPU lists, causes call_rcu() to introduce delays.

   These delays result in significant power savings on nearly idle
   Android and ChromeOS systems. These savings range from a few percent
   to more than ten percent.

   This series also includes several commits that change call_rcu() to a
   new call_rcu_hurry() function that avoids these delays in a few
   cases, for example, where timely wakeups are required. Several of
   these are outside of RCU and thus have acks and reviews from the
   relevant maintainers.

 - Create an srcu_read_lock_nmisafe() and an srcu_read_unlock_nmisafe()
   for architectures that support NMIs, but which do not provide
   NMI-safe this_cpu_inc(). These NMI-safe SRCU functions are required
   by the upcoming lockless printk() work by John Ogness et al.

 - Changes providing minor but important increases in torture test
   coverage for the new RCU polled-grace-period APIs.

 - Changes to torturescript that avoid redundant kernel builds, thus
   providing about a 30% speedup for the torture.sh acceptance test.

* tag 'rcu.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (49 commits)
  net: devinet: Reduce refcount before grace period
  net: Use call_rcu_hurry() for dst_release()
  workqueue: Make queue_rcu_work() use call_rcu_hurry()
  percpu-refcount: Use call_rcu_hurry() for atomic switch
  scsi/scsi_error: Use call_rcu_hurry() instead of call_rcu()
  rcu/rcutorture: Use call_rcu_hurry() where needed
  rcu/rcuscale: Use call_rcu_hurry() for async reader test
  rcu/sync: Use call_rcu_hurry() instead of call_rcu
  rcuscale: Add laziness and kfree tests
  rcu: Shrinker for lazy rcu
  rcu: Refactor code a bit in rcu_nocb_do_flush_bypass()
  rcu: Make call_rcu() lazy to save power
  rcu: Implement lockdep_rcu_enabled for !CONFIG_DEBUG_LOCK_ALLOC
  srcu: Debug NMI safety even on archs that don't require it
  srcu: Explain the reason behind the read side critical section on GP start
  srcu: Warn when NMI-unsafe API is used in NMI
  arch/s390: Add ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option
  arch/loongarch: Add ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option
  rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state()
  rcu-tasks: Make grace-period-age message human-readable
  ...

Pull iommu fix from Joerg Roedel:

 - Fix device mask to catch all affected devices in the recently added
   quirk for QAT devices in the Intel VT-d driver.

* tag 'iommu-fix-v6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Fix buggy QAT device mask

Merge tag 'mm-hotfixes-stable-2022-12-10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "Nine hotfixes.

  Six for MM, three for other areas. Four of these patches address
  post-6.0 issues"

* tag 'mm-hotfixes-stable-2022-12-10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  memcg: fix possible use-after-free in memcg_write_event_control()
  MAINTAINERS: update Muchun Song's email
  mm/gup: fix gup_pud_range() for dax
  mmap: fix do_brk_flags() modifying obviously incorrect VMAs
  mm/swap: fix SWP_PFN_BITS with CONFIG_PHYS_ADDR_T_64BIT on 32bit
  tmpfs: fix data loss from failed fallocate
  kselftests: cgroup: update kmem test precision tolerance
  mm: do not BUG_ON missing brk mapping, because userspace can unmap it
  mailmap: update Matti Vaittinen's email address

Pull ARM fix from Russell King:
 "One further ARM fix for 6.1 from Wang Kefeng, fixing up the handling
  for kfence faults"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9278/1: kfence: only handle translation faults

memcg_write_event_control() accesses the dentry->d_name of the specified
control fd to route the write call.  As a cgroup interface file can't be
renamed, it's safe to access d_name as long as the specified file is a
regular cgroup file.  Also, as these cgroup interface files can't be
removed before the directory, it's safe to access the parent too.

Prior to 347c4a87 ("memcg: remove cgroup_event->cft"), there was a
call to __file_cft() which verified that the specified file is a regular
cgroupfs file before further accesses.  The cftype pointer returned from
__file_cft() was no longer necessary and the commit inadvertently dropped
the file type check with it allowing any file to slip through.  With the
invarients broken, the d_name and parent accesses can now race against
renames and removals of arbitrary files and cause use-after-free's.

Fix the bug by resurrecting the file type check in __file_cft().  Now that
cgroupfs is implemented through kernfs, checking the file operations needs
to go through a layer of indirection.  Instead, let's check the superblock
and dentry type.

Link: https://lkml.kernel.org/r/Y5FRm/cfcKPGzWwl@slm.duckdns.org
Fixes: 347c4a87 ("memcg: remove cgroup_event->cft")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jann Horn <jannh@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org>	[3.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

I'm moving to the @linux.dev account.  Map my old addresses and update it
to my new address.

Link: https://lkml.kernel.org/r/20221208115548.85244-1-songmuchun@bytedance.comSigned-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

For dax pud, pud_huge() returns true on x86. So the function works as long
as hugetlb is configured. However, dax doesn't depend on hugetlb.
Commit 414fd080 ("mm/gup: fix gup_pmd_range() for dax") fixed
devmap-backed huge PMDs, but missed devmap-backed huge PUDs. Fix this as
well.

This fixes the below kernel panic:

general protection fault, probably for non-canonical address 0x69e7c000cc478: 0000 [#1] SMP
	< snip >
Call Trace:
<TASK>
get_user_pages_fast+0x1f/0x40
iov_iter_get_pages+0xc6/0x3b0
? mempool_alloc+0x5d/0x170
bio_iov_iter_get_pages+0x82/0x4e0
? bvec_alloc+0x91/0xc0
? bio_alloc_bioset+0x19a/0x2a0
blkdev_direct_IO+0x282/0x480
? __io_complete_rw_common+0xc0/0xc0
? filemap_range_has_page+0x82/0xc0
generic_file_direct_write+0x9d/0x1a0
? inode_update_time+0x24/0x30
__generic_file_write_iter+0xbd/0x1e0
blkdev_write_iter+0xb4/0x150
? io_import_iovec+0x8d/0x340
io_write+0xf9/0x300
io_issue_sqe+0x3c3/0x1d30
? sysvec_reschedule_ipi+0x6c/0x80
__io_queue_sqe+0x33/0x240
? fget+0x76/0xa0
io_submit_sqes+0xe6a/0x18d0
? __fget_light+0xd1/0x100
__x64_sys_io_uring_enter+0x199/0x880
? __context_tracking_enter+0x1f/0x70
? irqentry_exit_to_user_mode+0x24/0x30
? irqentry_exit+0x1d/0x30
? __context_tracking_exit+0xe/0x70
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x61/0xcb
RIP: 0033:0x7fc97c11a7be
	< snip >
</TASK>
---[ end trace 48b2e0e67debcaeb ]---
RIP: 0010:internal_get_user_pages_fast+0x340/0x990
	< snip >
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled

Link: https://lkml.kernel.org/r/1670392853-28252-1-git-send-email-ssengar@linux.microsoft.com
Fixes: 414fd080 ("mm/gup: fix gup_pmd_range() for dax")
Signed-off-by: John Starks <jostarks@microsoft.com>
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add more sanity checks to the VMA that do_brk_flags() will expand.  Ensure
the VMA matches basic merge requirements within the function before
calling can_vma_merge_after().

Drop the duplicate checks from vm_brk_flags() since they will be enforced
later.

The old code would expand file VMAs on brk(), which is functionally
wrong and also dangerous in terms of locking because the brk() path
isn't designed for file VMAs and therefore doesn't lock the file
mapping.  Checking can_vma_merge_after() ensures that new anonymous
VMAs can't be merged into file VMAs.

See https://lore.kernel.org/linux-mm/CAG48ez1tJZTOjS_FjRZhvtDA-STFmdw8PEizPDwMGFd_ui0Nrw@mail.gmail.com/

Link: https://lkml.kernel.org/r/20221205192304.1957418-1-Liam.Howlett@oracle.com
Fixes: 2e7ce7d3 ("mm/mmap: change do_brk_flags() to expand existing VMA and add do_brk_munmap()")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Suggested-by: Jann Horn <jannh@google.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

We use "unsigned long" to store a PFN in the kernel and phys_addr_t to
store a physical address.

On a 64bit system, both are 64bit wide.  However, on a 32bit system, the
latter might be 64bit wide.  This is, for example, the case on x86 with
PAE: phys_addr_t and PTEs are 64bit wide, while "unsigned long" only spans
32bit.

The current definition of SWP_PFN_BITS without MAX_PHYSMEM_BITS misses
that case, and assumes that the maximum PFN is limited by an 32bit
phys_addr_t.  This implies, that SWP_PFN_BITS will currently only be able
to cover 4 GiB - 1 on any 32bit system with 4k page size, which is wrong.

Let's rely on the number of bits in phys_addr_t instead, but make sure to
not exceed the maximum swap offset, to not make the BUILD_BUG_ON() in
is_pfn_swap_entry() unhappy.  Note that swp_entry_t is effectively an
unsigned long and the maximum swap offset shares that value with the swap
type.

For example, on an 8 GiB x86 PAE system with a kernel config based on
Debian 11.5 (-> CONFIG_FLATMEM=y, CONFIG_X86_PAE=y), we will currently
fail removing migration entries (remove_migration_ptes()), because
mm/page_vma_mapped.c:check_pte() will fail to identify a PFN match as
swp_offset_pfn() wrongly masks off PFN bits.  For example,
split_huge_page_to_list()->...->remap_page() will leave migration entries
in place and continue to unlock the page.

Later, when we stumble over these migration entries (e.g., via
/proc/self/pagemap), pfn_swap_entry_to_page() will BUG_ON() because these
migration entries shouldn't exist anymore and the page was unlocked.

[   33.067591] kernel BUG at include/linux/swapops.h:497!
[   33.067597] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[   33.067602] CPU: 3 PID: 742 Comm: cow Tainted: G            E      6.1.0-rc8+ #16
[   33.067605] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
[   33.067606] EIP: pagemap_pmd_range+0x644/0x650
[   33.067612] Code: 00 00 00 00 66 90 89 ce b9 00 f0 ff ff e9 ff fb ff ff 89 d8 31 db e8 48 c6 52 00 e9 23 fb ff ff e8 61 83 56 00 e9 b6 fe ff ff <0f> 0b bf 00 f0 ff ff e9 38 fa ff ff 3e 8d 74 26 00 55 89 e5 57 31
[   33.067615] EAX: ee394000 EBX: 00000002 ECX: ee394000 EDX: 00000000
[   33.067617] ESI: c1b0ded4 EDI: 00024a00 EBP: c1b0ddb4 ESP: c1b0dd68
[   33.067619] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 EFLAGS: 00010246
[   33.067624] CR0: 80050033 CR2: b7a00000 CR3: 01bbbd20 CR4: 00350ef0
[   33.067625] Call Trace:
[   33.067628]  ? madvise_free_pte_range+0x720/0x720
[   33.067632]  ? smaps_pte_range+0x4b0/0x4b0
[   33.067634]  walk_pgd_range+0x325/0x720
[   33.067637]  ? mt_find+0x1d6/0x3a0
[   33.067641]  ? mt_find+0x1d6/0x3a0
[   33.067643]  __walk_page_range+0x164/0x170
[   33.067646]  walk_page_range+0xf9/0x170
[   33.067648]  ? __kmem_cache_alloc_node+0x2a8/0x340
[   33.067653]  pagemap_read+0x124/0x280
[   33.067658]  ? default_llseek+0x101/0x160
[   33.067662]  ? smaps_account+0x1d0/0x1d0
[   33.067664]  vfs_read+0x90/0x290
[   33.067667]  ? do_madvise.part.0+0x24b/0x390
[   33.067669]  ? debug_smp_processor_id+0x12/0x20
[   33.067673]  ksys_pread64+0x58/0x90
[   33.067675]  __ia32_sys_ia32_pread64+0x1b/0x20
[   33.067680]  __do_fast_syscall_32+0x4c/0xc0
[   33.067683]  do_fast_syscall_32+0x29/0x60
[   33.067686]  do_SYSENTER_32+0x15/0x20
[   33.067689]  entry_SYSENTER_32+0x98/0xf1

Decrease the indentation level of SWP_PFN_BITS and SWP_PFN_MASK to keep it
readable and consistent.

[david@redhat.com: rely on sizeof(phys_addr_t) and min_t() instead]
  Link: https://lkml.kernel.org/r/20221206105737.69478-1-david@redhat.com
[david@redhat.com: use "int" for comparison, as we're only comparing numbers < 64]
  Link: https://lkml.kernel.org/r/1f157500-2676-7cef-a84e-9224ed64e540@redhat.com
Link: https://lkml.kernel.org/r/20221205150857.167583-1-david@redhat.com
Fixes: 0d206b5d ("mm/swap: add swp_offset_pfn() to fetch PFN from swap entry")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Fix tmpfs data loss when the fallocate system call is interrupted by a
signal, or fails for some other reason.  The partial folio handling in
shmem_undo_range() forgot to consider this unfalloc case, and was liable
to erase or truncate out data which had already been committed earlier.

It turns out that none of the partial folio handling there is appropriate
for the unfalloc case, which just wants to proceed to removal of whole
folios: which find_get_entries() provides, even when partially covered.

Original patch by Rui Wang.

Link: https://lore.kernel.org/linux-mm/33b85d82.7764.1842e9ab207.Coremail.chenguoqic@163.com/
Link: https://lkml.kernel.org/r/a5dac112-cf4b-7af-a33-f386e347fd38@google.com
Fixes: b9a8a419 ("truncate,shmem: Handle truncates that split large folios")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Guoqi Chen <chenguoqic@163.com>
  Link: https://lore.kernel.org/all/20221101032248.819360-1-kernel@hev.cc/
Cc: Rui Wang <kernel@hev.cc>
Cc: Huacai Chen <chenhuacai@loongson.cn>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: <stable@vger.kernel.org>	[5.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

1813e51e ("memcg: increase MEMCG_CHARGE_BATCH to 64") has changed
the batch size while this test case has been left behind. This has led
to a test failure reported by test bot:
not ok 2 selftests: cgroup: test_kmem # exit=1

Update the tolerance for the pcp charges to reflect the
MEMCG_CHARGE_BATCH change to fix this.

[akpm@linux-foundation.org: update comments, per Roman]
Link: https://lkml.kernel.org/r/Y4m8Unt6FhWKC6IH@dhcp22.suse.cz
Fixes: 1813e51e ("memcg: increase MEMCG_CHARGE_BATCH to 64")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: kernel test robot <yujie.liu@intel.com>
  Link: https://lore.kernel.org/oe-lkp/202212010958.c1053bd3-yujie.liu@intel.comAcked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The following program will trigger the BUG_ON that this patch removes,
because the user can munmap() mm->brk:

  #include <sys/syscall.h>
  #include <sys/mman.h>
  #include <assert.h>
  #include <unistd.h>

  static void *brk_now(void)
  {
    return (void *)syscall(SYS_brk, 0);
  }

  static void brk_set(void *b)
  {
    assert(syscall(SYS_brk, b) != -1);
  }

  int main(int argc, char *argv[])
  {
    void *b = brk_now();
    brk_set(b + 4096);
    assert(munmap(b - 4096, 4096 * 2) == 0);
    brk_set(b);
    return 0;
  }

Compile that with musl, since glibc actually uses brk(), and then
execute it, and it'll hit this splat:

  kernel BUG at mm/mmap.c:229!
  invalid opcode: 0000 [#1] PREEMPT SMP
  CPU: 12 PID: 1379 Comm: a.out Tainted: G S   U             6.1.0-rc7+ #419
  RIP: 0010:__do_sys_brk+0x2fc/0x340
  Code: 00 00 4c 89 ef e8 04 d3 fe ff eb 9a be 01 00 00 00 4c 89 ff e8 35 e0 fe ff e9 6e ff ff ff 4d 89 a7 20>
  RSP: 0018:ffff888140bc7eb0 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 00000000007e7000 RCX: ffff8881020fe000
  RDX: ffff8881020fe001 RSI: ffff8881955c9b00 RDI: ffff8881955c9b08
  RBP: 0000000000000000 R08: ffff8881955c9b00 R09: 00007ffc77844000
  R10: 0000000000000000 R11: 0000000000000001 R12: 00000000007e8000
  R13: 00000000007e8000 R14: 00000000007e7000 R15: ffff8881020fe000
  FS:  0000000000604298(0000) GS:ffff88901f700000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000603fe0 CR3: 000000015ba9a005 CR4: 0000000000770ee0
  PKRU: 55555554
  Call Trace:
   <TASK>
   do_syscall_64+0x2b/0x50
   entry_SYSCALL_64_after_hwframe+0x46/0xb0
  RIP: 0033:0x400678
  Code: 10 4c 8d 41 08 4c 89 44 24 10 4c 8b 01 8b 4c 24 08 83 f9 2f 77 0a 4c 8d 4c 24 20 4c 01 c9 eb 05 48 8b>
  RSP: 002b:00007ffc77863890 EFLAGS: 00000212 ORIG_RAX: 000000000000000c
  RAX: ffffffffffffffda RBX: 000000000040031b RCX: 0000000000400678
  RDX: 00000000004006a1 RSI: 00000000007e6000 RDI: 00000000007e7000
  RBP: 00007ffc77863900 R08: 0000000000000000 R09: 00000000007e6000
  R10: 00007ffc77863930 R11: 0000000000000212 R12: 00007ffc77863978
  R13: 00007ffc77863988 R14: 0000000000000000 R15: 0000000000000000
   </TASK>

Instead, just return the old brk value if the original mapping has been
removed.

[akpm@linux-foundation.org: fix changelog, per Liam]
Link: https://lkml.kernel.org/r/20221202162724.2009-1-Jason@zx2c4.com
Fixes: 2e7ce7d3 ("mm/mmap: change do_brk_flags() to expand existing VMA and add do_brk_munmap()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The email backend used by ROHM keeps labeling patches as spam.  This can
result in missing the patches.

Switch my mail address from a company mail to a personal one.

Link: https://lkml.kernel.org/r/8f4498b66fedcbded37b3b87e0c516e659f8f583.1669912977.git.mazziesaccount@gmail.comSigned-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Anup Patel <anup@brainfault.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Vasily Averin <vasily.averin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pull media fix from Mauro Carvalho Chehab:
 "A v4l-core fix related to validating DV timings related to video
  blanking values"

* tag 'media/v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: v4l2-dv-timings.c: fix too strict blanking sanity checks

Pull ARM SoC fix from Arnd Bergmann:
 "One more last minute revert for a boot regression that was found on
  the popular colibri-imx7"

* tag 'soc-fixes-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  Revert "ARM: dts: imx7: Fix NAND controller size-cells"

Pull drm fixes from Dave Airlie:
 "Last set of fixes for final, scattered bunch of fixes, two amdgpu, one
  vmwgfx, and some misc others.

  amdgpu:
   - S0ix fix
   - DCN 3.2 array out of bounds fix

  shmem:
   - Fixes to shmem-helper error paths

  bridge:
   - Fix polarity bug in bridge/ti-sn65dsi86

  dw-hdmi:
   - Prefer 8-bit RGB fallback before any YUV mode in dw-hdmi, since
     some panels lie about YUV support

  vmwgfx:
   - Stop using screen objects when SEV is active"

* tag 'drm-fixes-2022-12-09' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: fix array index out of bound error in DCN32 DML
  drm/amdgpu/sdma_v4_0: turn off SDMA ring buffer in the s2idle suspend
  drm/vmwgfx: Don't use screen objects when SEV is active
  drm/shmem-helper: Avoid vm_open error paths
  drm/shmem-helper: Remove errant put in error path
  drm: bridge: dw_hdmi: fix preference of RGB modes over YUV420
  drm/bridge: ti-sn65dsi86: Fix output polarity setting bug
  drm/vmwgfx: Fix race issue calling pin_user_pages

drm-misc-fixes for v6.1 final?:
- Fix polarity bug in bridge/ti-sn65dsi86.
- Prefer 8-bit RGB fallback before any YUV mode in dw-hdmi, since some
  panels lie about YUV support.
- Fixes to shmem-helper error paths.
- Small vmwgfx to stop using screen objects when SEV is active.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8110f02d-d155-926e-8674-c88b806c3a3a@linux.intel.com

Merge tag 'amd-drm-fixes-6.1-2022-12-07' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.1-2022-12-07:

amdgpu:
- S0ix fix
- DCN 3.2 array out of bounds fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221207222751.9558-1-alexander.deucher@amd.com

Pull block fix from Jens Axboe:
 "A small fix for initializing the NVMe quirks before initializing the
  subsystem"

* tag 'block-6.1-2022-12-08' of git://git.kernel.dk/linux:
  nvme initialize core quirks before calling nvme_init_subsystem

Pull io_uring fix from Jens Axboe:
 "A single small fix for an issue related to ordering between
  cancelation and current->io_uring teardown"

* tag 'io_uring-6.1-2022-12-08' of git://git.kernel.dk/linux:
  io_uring: Fix a null-ptr-deref in io_tctx_exit_cb()

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, can and netfilter.

  Current release - new code bugs:

   - bonding: ipv6: correct address used in Neighbour Advertisement
     parsing (src vs dst typo)

   - fec: properly scope IRQ coalesce setup during link up to supported
     chips only

  Previous releases - regressions:

   - Bluetooth fixes for fake CSR clones (knockoffs):
       - re-add ERR_DATA_REPORTING quirk
       - fix crash when device is replugged

   - Bluetooth:
       - silence a user-triggerable dmesg error message
       - L2CAP: fix u8 overflow, oob access
       - correct vendor codec definition
       - fix support for Read Local Supported Codecs V2

   - ti: am65-cpsw: fix RGMII configuration at SPEED_10

   - mana: fix race on per-CQ variable NAPI work_done

  Previous releases - always broken:

   - af_unix: diag: fetch user_ns from in_skb in unix_diag_get_exact(),
     avoid null-deref

   - af_can: fix NULL pointer dereference in can_rcv_filter

   - can: slcan: fix UAF with a freed work

   - can: can327: flush TX_work on ldisc .close()

   - macsec: add missing attribute validation for offload

   - ipv6: avoid use-after-free in ip6_fragment()

   - nft_set_pipapo: actually validate intervals in fields after the
     first one

   - mvneta: prevent oob access in mvneta_config_rss()

   - ipv4: fix incorrect route flushing when table ID 0 is used, or when
     source address is deleted

   - phy: mxl-gpy: add workaround for IRQ bug on GPY215B and GPY215C"

* tag 'net-6.1-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
  net: dsa: sja1105: avoid out of bounds access in sja1105_init_l2_policing()
  s390/qeth: fix use-after-free in hsci
  macsec: add missing attribute validation for offload
  net: mvneta: Fix an out of bounds check
  net: thunderbolt: fix memory leak in tbnet_open()
  ipv6: avoid use-after-free in ip6_fragment()
  net: plip: don't call kfree_skb/dev_kfree_skb() under spin_lock_irq()
  net: phy: mxl-gpy: add MDINT workaround
  net: dsa: mv88e6xxx: accept phy-mode = "internal" for internal PHY ports
  xen/netback: don't call kfree_skb() under spin_lock_irqsave()
  dpaa2-switch: Fix memory leak in dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove()
  ethernet: aeroflex: fix potential skb leak in greth_init_rings()
  tipc: call tipc_lxc_xmit without holding node_read_lock
  can: esd_usb: Allow REC and TEC to return to zero
  can: can327: flush TX_work on ldisc .close()
  can: slcan: fix freed work crash
  can: af_can: fix NULL pointer dereference in can_rcv_filter
  net: dsa: sja1105: fix memory leak in sja1105_setup_devlink_regions()
  ipv4: Fix incorrect route flushing when table ID 0 is used
  ipv4: Fix incorrect route flushing when source address is deleted
  ...

Pull HID fixes from Jiri Kosina:
 "A regression fix for handling Logitech HID++ devices and memory
  corruption fixes:

   - regression fix (revert) for catch-all handling of Logitech HID++
     Bluetooth devices; there are devices that turn out not to work with
     this, and the root cause is yet to be properly understood. So we
     are dropping it for now, and it will be revisited for 6.2 or 6.3
     (Benjamin Tissoires)

   - memory corruption fix in HID core (ZhangPeng)

   - memory corruption fix in hid-lg4ff (Anastasia Belova)

   - Kconfig fix for I2C_HID (Benjamin Tissoires)

   - a few device-id specific quirks that piggy-back on top of the
     important fixes above"

* tag 'for-linus-2022120801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  Revert "HID: logitech-hidpp: Enable HID++ for all the Logitech Bluetooth devices"
  Revert "HID: logitech-hidpp: Remove special-casing of Bluetooth devices"
  HID: usbhid: Add ALWAYS_POLL quirk for some mice
  HID: core: fix shift-out-of-bounds in hid_report_raw_event
  HID: uclogic: Add HID_QUIRK_HIDINPUT_FORCE quirk
  HID: fix I2C_HID not selected when I2C_HID_OF_ELAN is
  HID: hid-lg4ff: Add check for empty lbuf
  HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch V 10
  HID: uclogic: Fix frame templates for big endian architectures

Pull ARM SoC fix from Arnd Bergmann:
 "One last build fix came in, addressing a link failure when building
  without CONFIG_OUTER_CACHE"

* tag 'soc-fixes-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: at91: fix build for SAMA5D3 w/o L2 cache