- 23 Sep, 2022 12 commits
-
-
Arnd Bergmann authored
Merge tag 'qcom-arm64-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DTS updates for 6.1 Support for Samsung Galaxy E5, E7 and Grand Max is added, with support for both 32-bit and 64-bit variants. The Samsung Galaxy S4 Mini Value Edition gains magnetometer support. MSM8996-based Xiaomi devices gains descriptions of the LPG-based LEDs. On SA8295P ADP problems arising from regulators being switched into low-power mode is worked around by removing this ability, for now. The onboard USB Hub on SC7180 Trogdor is finally described and a few ADC related updates are introduced. On SC7280 support for the CPU and LLC bwmon instances are introduced. Soundwire, audio codecs and sound introduced for a variety of boards. Using required-opps the USB controllers votes for a minimum corner on VDD_CX. The onboard USB Hub Herobrine is described. A new board, the Google Evoker is added, as is another revision of Herobrine Villager. On SC8280XP the USB controllers are marked as wakeup-sources, to keep them powered during suspend. The CRD has HID devices marked as wakeup-sources to enable resuming the system. In addition to these changes the alternative touchpad is introduced on the Lenovo ThinkPad X13s. SDM845 gains RPMh stats support and the LLCC BWMON is added. For SM6350 interconnect providers and GPI DMA is introduced. A description of the PM7280b PMIC is added to Fairphone FP4 on SM7225. With the multi-MSI support added in the PCIe controller, SM8250 gets all its MSI interrupts added. UFS ICE and the second SDHCI controller is introduced on SM8450. Support for the Sony Xperia 1 IV is introduced. Throughout a variety of platforms the TCSR mutex syscon is replaced with the MMIO-based binding. TCSR nodes gained proper compatibles and halt syscon nodes are split out from the mutex ranges. A range of fixes to align with DT bindings are introduced. Among these are the changes to the follow the TLMM binding and suffix pinctrl states with -state and subnodes thereof with -pins, another is a number of changes transitioning to use -gpios and introduction of proper parent clock references in various clock providers. * tag 'qcom-arm64-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (136 commits) arm64: dts: qcom: sc7280: Add required-opps for USB arm64: dts: qcom: sm8450: fix UFS PHY serdes size arm64: dts: qcom: ipq8074: fix PCIe PHY serdes size arm64: dts: qcom: sa8295p-adp: add missing gpio-ranges in PMIC GPIOs arm64: dts: qcom: sa8295p-adp: add fallback compatible to PMIC GPIOs arm64: dts: qcom: msm8996-xiaomi: align PMIC GPIO pin configuration with DT schema arm64: dts: qcom: msm8994-msft-lumia-octagon: align resin node name with bindings arm64: dts: qcom: pmi8994: add missing MPP compatible fallback dt-bindings: pci: QCOM Add missing sc7280 aggre0, aggre1 clocks arm64: dts: qcom: sc7280: Add missing aggre0, aggre1 clocks arm64: dts: qcom: sc7280-villager: Adjust LTE SKUs dt-bindings: arm: qcom: Adjust LTE SKUs for sc7280-villager arm64: dts: qcom: sc7280-herobrine: Add nodes for onboard USB hub arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub arm64: dts: qcom: align SDHCI reg-names with DT schema arm64: dts: qcom: sm8250: provide additional MSI interrupts arm64: dts: qcom: msm8996: add #clock-cells and XO clock to the HDMI PHY node arm64: dts: qcom: Use WCD9335 DT bindings arm64: dts: qcom: msm8994: switch TCSR mutex to MMIO arm64: dts: qcom: ipq6018: switch TCSR mutex to MMIO ... Link: https://lore.kernel.org/r/20220921234854.1343238-1-andersson@kernel.orgSigned-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'qcom-dts-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM DTS updates for 6.1 This adds extends the IPQ8064 support with the two variants IPQ8062 and IPQ8065. MSM8974 and APQ8084 gained RPM stats support. The Audio DSP remoteproc was added to MSM8226 and enabled for ASUS ZenWatch 2 and LG G Watch R. MSM8660 gained one I2C and one SPI bus and the APQ8060 Dragonboard got the TMA340 Touchscreen described. A wide range of improvements are done throughout the DTS files to align with bindings, fix issues and improve structure on things. * tag 'qcom-dts-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (35 commits) ARM: dts: qcom: apq8026-lg-lenok: Enable ADSP ARM: dts: qcom: apq8026-asus-sparrow: Enable ADSP ARM: dts: qcom: msm8226: Add ADSP node ARM: dts: qcom: ipq8064: pad addresses to 8 digit ARM: dts: qcom: ipq8064: reorganize node order and sort them ARM: dts: qcom: align SDHCI clocks with DT schema ARM: dts: qcom: align SDHCI reg-names with DT schema ARM: dts: qcom: msm8960: add clocks to the MMCC device node ARM: dts: qcom: apq8064: add clocks to the MMCC device node ARM: dts: qcom: msm8960: add clocks to the GCC device node ARM: dts: qcom: apq8064: add clocks to the GCC device node ARM: dts: qcom: msm8960: add clocks to the LCC device node ARM: dts: qcom: apq8064: add clocks to the LCC device node ARM: dts: qcom: msm8226: switch TCSR mutex to MMIO ARM: dts: qcom: apq8084: switch TCSR mutex to MMIO ARM: dts: qcom: msm8660: fix node names for fixed clocks ARM: dts: qcom: msm8660: add pxo/cxo clocks to the GCC node ARM: dts: qcom: apq8060-dragonboard: Add TMA340 to APQ8060 DragonBoard ARM: dts: qcom: msm8660: Add GSBI3 I2C bus ARM: dts: qcom: msm8660: Add GSBI1 SPI bus ... Link: https://lore.kernel.org/r/20220921222619.1338380-1-andersson@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'ti-k3-dt-for-v6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/dt TI K3 device tree updates for v6.1 New Features: AM62A: * Basic support for AM62A SoC and SK Board AM62: * EPWM support AM64: * GPMC, LED, Crypto accelerator support Fixes: J7200 pinmux node update Fixes for Crypto and RNG accelerators on AM65, J721e, J7200 Cleanups: Reorder SoC compatible and pinmux macros alphabetically * tag 'ti-k3-dt-for-v6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (22 commits) arm64: dts: ti: k3-j7200: fix main pinmux range arm64: dts: ti: Add support for AM62A7-SK arm64: dts: ti: Introduce AM62A7 family of SoCs dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM62A dt-bindings: arm: ti: Add bindings for AM62A7 SoC dt-bindings: arm: ti: Rearrange IOPAD macros alphabetically arm64: dts: ti: k3-am625-sk: Add epwm nodes arm64: dts: ti: k3-am62-main: Add epwm nodes arm64: dts: ti: k3-am642-sk: Add DT entry for onboard LEDs arm64: dts: ti: k3-j7200-mcu-wakeup: Add SA2UL node arm64: dts: ti: k3-am65-main: Do not exclusively claim SA2UL arm64: dts: ti: k3-am65-main: Move SA2UL to unused PSI-L thread ID arm64: dts: ti: k3-am65-main: Disable RNG node arm64: dts: ti: k3-j7200-main: Add main domain watchdog entries arm64: dts: ti: k3-am64-main: Add ELM (Error Location Module) node arm64: dts: ti: k3-am64-main: Add GPMC memory controller node arm64: dts: ti: k3-j721e-main: fix RNG node clock id arm64: dts: ti: k3-am64-main: Enable crypto accelerator arm64: dts: ti: k3-am64: Add SA2UL address space to Main CBASS ranges arm64: dts: ti: k3-am64-main: Add main_cpts label ... Link: https://lore.kernel.org/r/44729b46-27f9-94a0-17ed-8868649a4a0a@ti.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'renesas-arm-dt-for-v6.1-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v6.1 (take two) - Merge Renesas ARM/ARM64 maintainers entries, - CAN support for the RZ/N1 SoC and the RZN1D-DB development board, - Watchdog, pin control, I2C (EEPROM), GPIO (LEDS/switches), and Ethernet support for the R-Car V4H SoC and the White Hawk development board, - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v6.1-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (26 commits) arm64: dts: renesas: Adjust whitespace around '{' arm64: dts: renesas: rzg2ul-smarc: Include SoM DTSI into board DTS arm64: dts: renesas: rzg2ul-smarc-som: Drop enabling wdt2 ARM: dts: renesas: Fix USB PHY device and child node names arm64: dts: renesas: r8a779a0: Update to R-Car Gen4 compatible values arm64: dts: renesas: white-hawk-cpu: Add missing bootargs arm64: dts: renesas: spider-cpu: Add missing bootargs arm64: dts: renesas: spider: Move aliases and chosen arm64: dts: renesas: white-hawk-cpu: Add Ethernet support arm64: dts: renesas: white-hawk: Move aliases and chosen arm64: dts: renesas: r8a779g0: Add RAVB nodes arm64: dts: renesas: white-hawk-cpu: Add push switches arm64: dts: renesas: white-hawk-cpu: Add GP LEDs arm64: dts: renesas: r8a779g0: Add GPIO nodes arm64: dts: renesas: white-hawk: Add Ethernet sub-board arm64: dts: renesas: white-hawk: Add CSI/DSI sub-board arm64: dts: renesas: white-hawk: Add I2C0 and EEPROMs arm64: dts: renesas: r8a779g0: Add I2C nodes arm64: dts: renesas: white-hawk-cpu: Add serial port pin control arm64: dts: renesas: r8a779g0: Add pinctrl device node ... Link: https://lore.kernel.org/r/cover.1663588776.git.geert+renesas@glider.beSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'v6.0-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt mt6795: - add add system timer node mt7986a: - add wifi support mt8183: - add MDP3 and keypad mt8186: - basic support for the Evaluation Board including, i2c, usb and uart. mt8192: - add nodes to support PWM, MIPI transciever, display with GCE and DSI. mt8195: - disable nodes not used on all boards - Add support for CPU freq, clocks, power domain controller, spmi, scp. - Enable audio decoder, DSP, IOMMU, mailbox. - Add display nodes for vdosys0. - On Cherry based chromebooks, enable the system companion processor, Cross EC, Google Security Chip, secondary MMC controller, trackpad and a few regulators. * tag 'v6.0-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (34 commits) arm64: dts: mediatek: mt6795: Add CPUX system timer node arm64: dts: mt7986: add built-in Wi-Fi device nodes arm64: dts: mediatek: cherry: Enable MT6315 regulators on SPMI bus arm64: dts: mediatek: cherry: Enable Elantech eKTH3000 i2c trackpad arm64: dts: mediatek: cherry: Enable secondary SD/MMC controller arm64: dts: mediatek: cherry: Add keyboard mapping for the top row arm64: dts: mediatek: cherry: Add Google Security Chip (GSC) TPM arm64: dts: mediatek: cherry: Wire up the ChromeOS Embedded Controller arm64: dts: mediatek: cherry: Enable the System Companion Processor arm64: dts: mediatek: Fix build warnings of mt8173 vcodec nodes arm64: dts: mediatek: Add missing xHCI clocks for mt8192 and mt8195 arm64: dts: mt8192: Add dsi node arm64: dts: mt8192: Add display nodes arm64: dts: mediatek: Add mmsys #reset-cells property for mt8192 arm64: dts: mt8192: Add mipi_tx node arm64: dts: mt8192: Add pwm node arm64: dts: Add MediaTek MT8186 dts and evaluation board and Makefile arm64: dts: mt8195: Add display node for vdosys0 arm64: dts: mt8195: Add gce node arm64: dts: mt8195: Add iommu and smi nodes ... Link: https://lore.kernel.org/r/3b915692-c8a9-c508-5a4a-0fdb49355e99@gmail.comSigned-off-by:
-
Linus Walleij authored
The DT parser is dependent on the PCI device being tagged as device_type = "pci" in order to parse memory ranges properly. Fix this up. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220919092608.813511-1-linus.walleij@linaro.org' Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'sunxi-dt-for-6.1-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt - Allwinner A100 DMA node - Allwinner H6 GPU devfreq scaling - sunxi sram bindings cleanup and D1 addition * tag 'sunxi-dt-for-6.1-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: dt-bindings: sram: sunxi-sram: Add D1 compatible string dt-bindings: sram: sunxi-sram: Clean up the compatible lists arm64: dts: allwinner: beelink-gs1: Enable GPU OPP arm64: dts: allwinner: h6: Add GPU OPP table arm64: dts: allwinner: h6: Add cooling map for GPU arm64: dts: allwinner: a100: Add I2C DMA requests arm64: dts: allwinner: a100: Add device node for DMA controller Link: https://lore.kernel.org/r/YyePKDnOeP8Tdt5n@kista.localdomainSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'imx-dt64-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm64 device tree change for 6.1: - New board support: i.MX8DXL EVK, Kontron SL/BL i.MX8MM OSM-S, i.MX8MM Gateworks GW7904, MSC SM2S-IMX8PLUS SoM and carrier board, NXP LS2081ARDB. - Update i.MX8MQ device tree to use generic name 'dma-controller' for SDMA. - A number of i.MX8ULP device tree improvements and updates: correct parent clock of LPI2C & LPSPI, increase the clock speed of LPSPI, add PMU and mailbox device, drop undocumented CGC property, enable FEC, etc. - Add interconnect property for various i.MX8MP blk-ctrl devices. - Enable VPU PGC, blk-ctrl and PCIe support for i.MX8MP SoC. - A set of changes from Peng Fan to add various devices for i.MX93 SoC, including MU, blk-ctrl, PMU, LPI2C, LPSPI, SRC, etc. - Two set of changes to update LS1043A and LS1046A device trees on various aspects, including USB3, PCIe, DMA, mdio-mux, QSPI Flash, etc. - Board imx8mq-librem5 update: add USB role switching, add RGB PWM notification LEDs, add voice coil motor for focus control, fix MIPI_CSI description. - A series from Frieder Schrempf to improve imx8mm-kontron device trees for VSELECT switch, DDRC operating point, SPI NOR partition layout etc. - A set of display and PMIC related additions and improvements on imx8mm-verdin board. - A number of i.MX8M Plus DHCOM PDK2 device tree improvments from Marek Vasut. - A few imx8mp-venice device tree updates on USB, cpufreq and WiFi/BT. - A series from Vladimir Oltean to enable multiple switch CPU ports support. - Other small and random board specific updates. * tag 'imx-dt64-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (90 commits) arm64: dts: ls1046a-qds: Modify the qspi flash frequency arm64: dts: ls1046a-qds: add mmio based mdio-mux nodes for FPGA arm64: dts: ls1046a: add gpios based i2c recovery information arm64: dts: ls1046a: use a pseudo-bus to constrain usb and sata dma size arm64: dts: ls1046a: make dma-coherent global to the SoC arm64: dts: ls1046a: add missing dma ranges property arm64: dts: ls1046a: Add big-endian property for PCIe nodes arm64: dts: ls1046a: Add the PME interrupt and big-endian to PCIe EP nodes arm64: dts: ls1046a: Enable usb3-lpm-capable for usb3 node arm64: dts: ls1043a-rdb: add pcf85263 rtc node arm64: dts: ls1043a-qds: add mmio based mdio-mux support arm64: dts: ls1043a: use a pseudo-bus to constrain usb and sata dma size arm64: dts: ls1043a: add gpio based i2c recovery information arm64: dts: ls1043a: make dma-coherent global to the SoC arm64: dts: ls1043a: add missing dma ranges property arm64: dts: ls1043a: Add big-endian property for PCIe nodes arm64: dts: ls1043a: Add SCFG phandle for PCIe nodes arm64: dts: ls1043a: use pcie aer/pme interrupts arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 node arm64: dts: ls1043a: fix the wrong size of dcfg space ... Link: https://lore.kernel.org/r/20220918092806.2152700-4-shawnguo@kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linuxArnd Bergmann authored
i.MX device tree change for 6.1 - A series from Alexander Stein to add missing properties for i.MX6 SRAM. - Drop 'interrupts' property when 'interrupts-extended' is present. This fixes a dtbs_check warning with i.MX6 DT. - Update device trees to use generic name 'dma-controller' for SDMA. - A set of changes from Krzysztof Kozlowski to align SPI, LED and gpio-keys node name with dtschema. - A series of indentation and white-space cleanups from Marcel Ziswiler to address various checkpatch warnings. - Add DDR pinmux defines to VF610 DT header. - A couple of changes from Peng Fan to update clock-names and add IPG clock for i.MX7ULP LPI2C devices. - Improve device tree structure for Kontron i.MX6UL/ULL based boards. - A series of changes from Tim Harvey to add CAN regulator for Gateworks i.MX6QDL boards. - Various small and random board specific updates. * tag 'imx-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (40 commits) ARM: dts: imx6qdl-gw54xx: add CAN regulator ARM: dts: imx6qdl-gw53xx: add CAN regulator ARM: dts: imx6qdl-gw52xx: add CAN regulator ARM: dts: imx: update sdma node name format ARM: dts: imx6: skov: migrate to resistive-adc-touch ARM: dts: imx6sx-udoo-neo: don't use multiple blank lines ARM: dts: imx6sl: use tabs for code indent ARM: dts: imx6sx: add missing properties for sram ARM: dts: imx6sll: add missing properties for sram ARM: dts: imx6sl: add missing properties for sram ARM: dts: imx6qp: add missing properties for sram ARM: dts: imx6dl: add missing properties for sram ARM: dts: imx6q: add missing properties for sram ARM: dts: imx7ulp: Add IPG clock for lpi2c ARM: dts: imx7ulp: update the LPI2C clock-names ARM: dts: vf610: ddr pinmux ARM: dts: imx6qdl-dhcom: Move IPU iomux node from PDK2 to SoM file ARM: dts: imx6ul-kontron: Add imx6ull-kontron-bl to Makefile ARM: dts: imx6ul-kontron: Simplify devicetree structure ARM: dts: vf610: align SPI node name with dtschema ... Link: https://lore.kernel.org/r/20220918092806.2152700-3-shawnguo@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'imx-bindings-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX DT bindings for 6.1: - Add compatible for new boards: Kontron BL i.MX8MM OSM-S, MSC SM2S-IMX8PLUS SoM and SM2-MB-EP1 Carrier, i.MX8M Mini Gateworks GW7904 board, i.MX8DXL EVK Board. - Add add interconnect property for i.MX8MP various blk-ctrl devices. - Add i.MX8MP HDMI HDCP and HRV power domain DT IDs. - Add bindings for i.MX93 SRC and MEDIAMIX blk-ctrl. - A minor style fix on i.MX8MM clock binding header. * tag 'imx-bindings-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: imx: update fsl.yaml for imx8dxl dt-bindings: firmware: add missing resource IDs for imx8dxl dt-bindings: arm: Add i.MX8M Mini Gateworks GW7904 board dt-bindings: soc: add i.MX93 mediamix blk ctrl dt-bindings: soc: add i.MX93 SRC dt-bindings: mfd: syscon: Add i.MX93 blk ctrl system registers dt-bindings: arm: fsl: Add MSC SM2S-IMX8PLUS SoM and SM2-MB-EP1 Carrier dt-bindings: arm: fsl: Add Kontron BL i.MX8MM OSM-S board dt-bindings: arm: fsl: Rename compatibles for Kontron i.MX8MM SoM/board dt-bindings: soc: imx: add i.MX8MP vpu blk ctrl dt-bindings: soc: imx: add interconnect property for i.MX8MM vpu blk ctrl dt-bindings: soc: imx: drop minItems for i.MX8MM vpu blk ctrl dt-bindings: power: imx8mp-power: add HDMI HDCP/HRV dt-bindings: arm: fsl: imx6ul-kontron: Update bindings dt-bindings: clk: imx8mm: don't use multiple blank lines dt-bindings: soc: imx: add interconnect property for i.MX8MP hsio blk ctrl dt-bindings: soc: imx: add interconnect property for i.MX8MP hdmi blk ctrl dt-bindings: soc: imx: add interconnect property for i.MX8MP media blk ctrl Link: https://lore.kernel.org/r/20220918092806.2152700-1-shawnguo@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'tegra-for-6.1-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Device tree changes for v6.1-rc1 These changes enable PCI, Ethernet and HDA support on Jetson AGX Orin. DMA support is enabled for I2C on a number of SoC generations and the Google Pixel C (a.k.a. Smaug) device receives Bluetooth and Wi-Fi support. Other than that this also contains some minor cleanups and fixes. * tag 'tegra-for-6.1-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Add GPCDMA support for Tegra I2C arm64: tegra: Add iommus for HDA on Tegra234 arm64: tegra: Enable HDA node for Jetson AGX Orin arm64: tegra: Add context isolation domains on Tegra234 arm64: tegra: Fixup iommu-map property formatting arm64: dts: tegra: smaug: Add Wi-Fi node arm64: dts: tegra: smaug: Add Bluetooth node arm64: tegra: Enable MGBE on Jetson AGX Orin Developer Kit arm64: tegra: Add MGBE nodes on Tegra234 arm64: tegra: Fix up compatible for Tegra234 GPCDMA arm64: tegra: Enable PCIe slots in P3737-0000 board arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT arm64: tegra: Add regulators required for PCIe Link: https://lore.kernel.org/r/20220916101957.1635854-5-thierry.reding@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'tegra-for-6.1-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt dt-bindings: Changes for v6.1-rc1 Adds device tree bindings for the MGBE found on Tegra234 SoCs, as well as stream IDs for the shared host1x context devices. * tag 'tegra-for-6.1-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: Add Host1x context stream IDs on Tegra234 dt-bindings: net: Add Tegra234 MGBE Link: https://lore.kernel.org/r/20220916101957.1635854-4-thierry.reding@gmail.comSigned-off-by:
-
- 21 Sep, 2022 1 commit
-
-
Matt Ranostay authored
Range size of 0x2b4 was incorrect since there isn't 173 configurable pins for muxing. Additionally there is a non-addressable region in the mapping which requires splitting into two ranges. main_pmx0 -> 67 pins main_pmx1 -> 3 pins Fixes: d361ed88 ("arm64: dts: ti: Add support for J7200 SoC") Signed-off-by:
Matt Ranostay <mranostay@ti.com> Signed-off-by:
Vignesh Raghavendra <vigneshr@ti.com> Tested-by:
Vaishnav Achath <vaishnav.a@ti.com> Link: https://lore.kernel.org/r/20220919205723.8342-1-mranostay@ti.com
-
- 19 Sep, 2022 14 commits
-
-
Lad Prabhakar authored
Drop extra space around the '{' sign. No functional changes (same DTB). Signed-off-by:Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220916100251.20329-1-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by:
Geert Uytterhoeven <geert+renesas@glider.be>
-
Lad Prabhakar authored
Move including the rzg2ul-smarc-som.dtsi from the carrier board rzg2ul-smarc.dtsi to the actual RZ/G2UL SMARC EVK board dts r9a07g043u11-smarc.dts. Also move the SW_SW0_DEV_SEL and SW_ET0_EN_N macros to board dts as they are used by SoM and carrier board DTS/I. This is in preparation of re-using the SoM and carrier board DTSIs for RZ/Five SMARC EVK. Signed-off-by:
-
Lad Prabhakar authored
WDT CH2 is specifically to check the operation of Cortex-M33 CPU so don't enable WDT2 by default. Signed-off-by:
-
Geert Uytterhoeven authored
make dtbs_check: usb-phy@e6590100: '#phy-cells' is a required property From schema: dtschema/schemas/phy/phy-provider.yaml The R-Car Gen2 USB PHY device nodes do not represent USB PHYs theirselves, and thus do not have "#phy-cells" properties. Fix the warning by renaming them from "usb-phy" to "usb-phy-controller". Rename their child nodes from "usb-channel" to "usb-phy", as these do represent USB PHYs. Signed-off-by:Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/6442b4042e26537abc8632c4772f8201685f1f1f.1663165098.git.geert+renesas@glider.be
-
Geert Uytterhoeven authored
Despite the name, R-Car V3U is the first member of the R-Car Gen4 family. Hence update the compatible properties in various device nodes to include family-specific compatible values for R-Car Gen4 instead of R-Car Gen3: - CMT, - SDHI. Signed-off-by:
-
Kuninori Morimoto authored
This patch adds missing bootargs for R-Car V4H White Hawk board. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87k06858oe.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
This patch adds missing bootargs for R-Car S4 Spider board. One note is that current Spider board doesn't have Ethernet support yet, but this patch adds standard settings for it, too. Signed-off-by:
-
Geert Uytterhoeven authored
The serial console and serial debug ports on Spider are located on the CPU board. Hence move the aliases and chosen nodes containing serial port configuration from the main Spider DTS file to the DTS file that describes the CPU board. Signed-off-by:
-
Geert Uytterhoeven authored
Describe the wiring of the first Ethernet AVB instance to the Micrel KSZ9031RNXVB PHY. Based on a larger patch in the BSP by Takeshi Kihara. Signed-off-by:
-
Geert Uytterhoeven authored
The serial console port on White Hawk is located on the CPU board. Hence move the aliases and chosen nodes containing serial console configuration from the main White Hawk DTS file to the DTS file that describes the CPU board. Signed-off-by:
-
Geert Uytterhoeven authored
Add device nodes for the Renesas Ethernet AVB (EtherAVB-IF) blocks on the Renesas R-Car V4H (R8A779G0) SoC. Based on a larger patch in the BSP by Takeshi Kihara. Signed-off-by:
-
Geert Uytterhoeven authored
Describe the three Push Switches on the White Hawk CPU board, so they can be used for user input. Signed-off-by:
-
Geert Uytterhoeven authored
Describe the three General Purpose LEDs on the White Hawk CPU board, so they can be used as indicator LEDs. Signed-off-by:
-
Geert Uytterhoeven authored
Add device nodes for the General Purpose Input/Output (GPIO) blocks on the Renesas R-Car V4H (R8A779G0) SoC. Signed-off-by:
-
- 18 Sep, 2022 10 commits
-
-
Samuel Holland authored
D1 needs to export a register for managing some LDO regulators, so it needs a unique compatible. Signed-off-by:
Samuel Holland <samuel@sholland.org> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20220815041248.53268-3-samuel@sholland.orgSigned-off-by:
Jernej Skrabec <jernej.skrabec@gmail.com>
-
Samuel Holland authored
Use enumerations where appropriate to combine "const" choices and deduplicate fallback compatible strings. Suggested-by:
Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20220815041248.53268-2-samuel@sholland.orgSigned-off-by:
-
Geert Uytterhoeven authored
Add a DTS file for the R-Car V4H White Hawk RAVB/Ethernet(1000Base-T1) sub-board (RTP8A779G0ASKB0SE0SA000), and include it from the main r8a779g0-white-hawk.dts. For now its contents are limited to the Board ID EEPROM. Signed-off-by:
-
Geert Uytterhoeven authored
Add a DTS file for the R-Car V4H White Hawk CSI/DSI sub-board (RTP8A779G0ASKB0SC0SA000), and include it from the main r8a779g0-white-hawk.dts. For now its contents are limited to the Board ID EEPROM. Signed-off-by:
-
Geert Uytterhoeven authored
Enable the I2C0 bus on the White Hawk CPU board, and describe the I2C EEPROMs present on the White Hawk CPU and BreakOut boards. Based on a larger patch in the BSP by Takeshi Kihara. Signed-off-by:
-
Geert Uytterhoeven authored
Add device nodes for the I2C Bus Interfaces on the Renesas R-Car V4H (R8A779G0) SoC. Extracted from a larger patch in the BSP by Takeshi Kihara. Signed-off-by:
-
Geert Uytterhoeven authored
Complete the description of the serial console and the external serial clock by adding pin control. Based on larger patch in the BSP by Takeshi Kihara. Signed-off-by:
-
Geert Uytterhoeven authored
Add a device node for the Pin Function Controller on the Renesas R-Car V4H (R8A779G0) SoC. Based on a larger patch in the BSP by Takeshi Kihara. Signed-off-by:
-
Geert Uytterhoeven authored
Enable the watchdog timer on the White Hawk CPU board. Signed-off-by:
-
Geert Uytterhoeven authored
Add a device node for the RCLK Watchdog Timer (RWDT) on the Renesas R-Car V4H (R8A779G0) SoC. Based on a patch in the BSP by Thanh Quan. Signed-off-by:
-
- 17 Sep, 2022 3 commits
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linuxArnd Bergmann authored
AT91 DT for v6.1 #2 It contains: - new SAMA5D3 based board, namely SAMA5D3-EDS - adjustments to pass the DT binding validations - disable AES on some LAN966 based boards as they are reserverd by secure OS * tag 'at91-dt-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: spi: dt-bindings: atmel,at91rm9200-spi: Add DMA related properties ARM: dts: at91: Add `atmel,usart-mode` required property to serial nodes ARM: dts: at91: sam9x60ek: Add DBGU compatibles to uart1 ARM: dts: at91: sama7g5: Swap rx and tx for spi11 dts: arm: at91: Add SAMA5D3-EDS Board dt-bindings: arm: at91: Add info on SAMA5D3-EDS ARM: dts: lan966x: disable aes Link: https://lore.kernel.org/r/20220916105407.1287452-1-claudiu.beznea@microchip.comSigned-off-by:
-
Pankaj Bansal authored
The qspi flash in ls1046a QDS board can operate at 50MHz frequency. Therefore, update the maximum supported freq in dts file. Signed-off-by:
Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by:
Li Yang <leoyang.li@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Li Yang authored
There is mmio based mdio mux function in the FPGA device on ls1046a-qds board. Add the mmio based mdio-mux nodes to ls1043a-qds boards and add simple-mfd as a compatbile for the FPGA node to reflect the multi-function nature of it. Signed-off-by:
Camelia Groza <camelia.groza@nxp.com> Signed-off-by:
-
