- 05 May, 2022 19 commits
-
-
Tetsuo Handa authored
Eric Dumazet is reporting addition on 0 problem at rds_tcp_tune(), for delayed works queued in rds_wq might be invoked after a net namespace's refcount already reached 0. Since rds_tcp_exit_net() from cleanup_net() calls flush_workqueue(rds_wq), it is guaranteed that we can instead use maybe_get_net() from delayed work functions until rds_tcp_exit_net() returns. Note that I'm not convinced that all works which might access a net namespace are already queued in rds_wq by the moment rds_tcp_exit_net() calls flush_workqueue(rds_wq). If some race is there, rds_tcp_exit_net() will fail to wait for work functions, and kmem_cache_free() could be called from net_free() before maybe_get_net() is called from rds_tcp_tune(). Reported-by:
Eric Dumazet <edumazet@google.com> Fixes: 3a58f13a ("net: rds: acquire refcount on TCP sockets") Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from can, rxrpc and wireguard. Previous releases - regressions: - igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter() - mld: respect RCU rules in ip6_mc_source() and ip6_mc_msfilter() - rds: acquire netns refcount on TCP sockets - rxrpc: enable IPv6 checksums on transport socket - nic: hinic: fix bug of wq out of bound access - nic: thunder: don't use pci_irq_vector() in atomic context - nic: bnxt_en: fix possible bnxt_open() failure caused by wrong RFS flag - nic: mlx5e: - lag, fix use-after-free in fib event handler - fix deadlock in sync reset flow Previous releases - always broken: - tcp: fix insufficient TCP source port randomness - can: grcan: grcan_close(): fix deadlock - nfc: reorder destructive operations in to avoid bugs Misc: - wireguard: improve selftests reliability" * tag 'net-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits) NFC: netlink: fix sleep in atomic bug when firmware download timeout selftests: ocelot: tc_flower_chains: specify conform-exceed action for policer tcp: drop the hash_32() part from the index calculation tcp: increase source port perturb table to 2^16 tcp: dynamically allocate the perturb table used by source ports tcp: add small random increments to the source port tcp: resalt the secret every 10 seconds tcp: use different parts of the port_offset for index and offset secure_seq: use the 64 bits of the siphash for port offset calculation wireguard: selftests: set panic_on_warn=1 from cmdline wireguard: selftests: bump package deps wireguard: selftests: restore support for ccache wireguard: selftests: use newer toolchains to fill out architectures wireguard: selftests: limit parallelism to $(nproc) tests at once wireguard: selftests: make routing loop test non-fatal net/mlx5: Fix matching on inner TTC net/mlx5: Avoid double clear or set of sync reset requested net/mlx5: Fix deadlock in sync reset flow net/mlx5e: Fix trust state reset in reload net/mlx5e: Avoid checking offload capability in post_parse action ... -
Duoming Zhou authored
There are sleep in atomic bug that could cause kernel panic during firmware download process. The root cause is that nlmsg_new with GFP_KERNEL parameter is called in fw_dnld_timeout which is a timer handler. The call trace is shown below: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:265 Call Trace: kmem_cache_alloc_node __alloc_skb nfc_genl_fw_download_done call_timer_fn __run_timers.part.0 run_timer_softirq __do_softirq ... The nlmsg_new with GFP_KERNEL parameter may sleep during memory allocation process, and the timer handler is run as the result of a "software interrupt" that should not call any other function that could sleep. This patch changes allocation mode of netlink message from GFP_KERNEL to GFP_ATOMIC in order to prevent sleep in atomic bug. The GFP_ATOMIC flag makes memory allocation operation could be used in atomic context. Fixes: 9674da87 ("NFC: Add firmware upload netlink command") Fixes: 9ea7187c ("NFC: netlink: Rename CMD_FW_UPLOAD to CMD_FW_DOWNLOAD") Signed-off-by:
Duoming Zhou <duoming@zju.edu.cn> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220504055847.38026-1-duoming@zju.edu.cnSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Vladimir Oltean authored
As discussed here with Ido Schimmel: https://patchwork.kernel.org/project/netdevbpf/patch/20220224102908.5255-2-jianbol@nvidia.com/ the default conform-exceed action is "reclassify", for a reason we don't really understand. The point is that hardware can't offload that police action, so not specifying "conform-exceed" was always wrong, even though the command used to work in hardware (but not in software) until the kernel started adding validation for it. Fix the command used by the selftest by making the policer drop on exceed, and pass the packet to the next action (goto) on conform. Fixes: 8cd6b020 ("selftests: ocelot: add some example VCAP IS1, IS2 and ES0 tc offloads") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220503121428.842906-1-vladimir.oltean@nxp.comSigned-off-by:
-
Jakub Kicinski authored
Willy Tarreau says: ==================== insufficient TCP source port randomness In a not-yet published paper, Moshe Kol, Amit Klein, and Yossi Gilad report being able to accurately identify a client by forcing it to emit only 40 times more connections than the number of entries in the table_perturb[] table, which is indexed by hashing the connection tuple. The current 2^8 setting allows them to perform that attack with only 10k connections, which is not hard to achieve in a few seconds. Eric, Amit and I have been working on this for a few weeks now imagining, testing and eliminating a number of approaches that Amit and his team were still able to break or that were found to be too risky or too expensive, and ended up with the simple improvements in this series that resists to the attack, doesn't degrade the performance, and preserves a reliable port selection algorithm to avoid connection failures, including the odd/even port selection preference that allows bind() to always find a port quickly even under strong connect() stress. The approach relies on several factors: - resalting the hash secret that's used to choose the table_perturb[] entry every 10 seconds to eliminate slow attacks and force the attacker to forget everything that was learned after this delay. This already eliminates most of the problem because if a client stays silent for more than 10 seconds there's no link between the previous and the next patterns, and 10s isn't yet frequent enough to cause too frequent repetition of a same port that may induce a connection failure ; - adding small random increments to the source port. Previously, a random 0 or 1 was added every 16 ports. Now a random 0 to 7 is added after each port. This means that with the default 32768-60999 range, a worst case rollover happens after 1764 connections, and an average of 3137. This doesn't stop statistical attacks but requires significantly more iterations of the same attack to confirm a guess. - increasing the table_perturb[] size from 2^8 to 2^16, which Amit says will require 2.6 million connections to be attacked with the changes above, making it pointless to get a fingerprint that will only last 10 seconds. Due to the size, the table was made dynamic. - a few minor improvements on the bits used from the hash, to eliminate some unfortunate correlations that may possibly have been exploited to design future attack models. These changes were tested under the most extreme conditions, up to 1.1 million connections per second to one and a few targets, showing no performance regression, and only 2 connection failures within 13 billion, which is less than 2^-32 and perfectly within usual values. The series is split into small reviewable changes and was already reviewed by Amit and Eric. ==================== Link: https://lore.kernel.org/r/20220502084614.24123-1-w@1wt.euSigned-off-by: -
Willy Tarreau authored
In commit 190cc824 ("tcp: change source port randomizarion at connect() time"), the table_perturb[] array was introduced and an index was taken from the port_offset via hash_32(). But it turns out that hash_32() performs a multiplication while the input here comes from the output of SipHash in secure_seq, that is well distributed enough to avoid the need for yet another hash. Suggested-by:
Amit Klein <aksecurity@gmail.com> Reviewed-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Willy Tarreau authored
Moshe Kol, Amit Klein, and Yossi Gilad reported being able to accurately identify a client by forcing it to emit only 40 times more connections than there are entries in the table_perturb[] table. The previous two improvements consisting in resalting the secret every 10s and adding randomness to each port selection only slightly improved the situation, and the current value of 2^8 was too small as it's not very difficult to make a client emit 10k connections in less than 10 seconds. Thus we're increasing the perturb table from 2^8 to 2^16 so that the same precision now requires 2.6M connections, which is more difficult in this time frame and harder to hide as a background activity. The impact is that the table now uses 256 kB instead of 1 kB, which could mostly affect devices making frequent outgoing connections. However such components usually target a small set of destinations (load balancers, database clients, perf assessment tools), and in practice only a few entries will be visited, like before. A live test at 1 million connections per second showed no performance difference from the previous value. Reported-by:
Moshe Kol <moshe.kol@mail.huji.ac.il> Reported-by:
Yossi Gilad <yossi.gilad@mail.huji.ac.il> Reported-by:
-
Willy Tarreau authored
We'll need to further increase the size of this table and it's likely that at some point its size will not be suitable anymore for a static table. Let's allocate it on boot from inet_hashinfo2_init(), which is called from tcp_init(). Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by:
-
Willy Tarreau authored
Here we're randomly adding between 0 and 7 random increments to the selected source port in order to add some noise in the source port selection that will make the next port less predictable. With the default port range of 32768-60999 this means a worst case reuse scenario of 14116/8=1764 connections between two consecutive uses of the same port, with an average of 14116/4.5=3137. This code was stressed at more than 800000 connections per second to a fixed target with all connections closed by the client using RSTs (worst condition) and only 2 connections failed among 13 billion, despite the hash being reseeded every 10 seconds, indicating a perfectly safe situation. Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by:
-
Eric Dumazet authored
In order to limit the ability for an observer to recognize the source ports sequence used to contact a set of destinations, we should periodically shuffle the secret. 10 seconds looks effective enough without causing particular issues. Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by:
-
Willy Tarreau authored
Amit Klein suggests that we use different parts of port_offset for the table's index and the port offset so that there is no direct relation between them. Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by:
-
Willy Tarreau authored
SipHash replaced MD5 in secure_ipv{4,6}_port_ephemeral() via commit 7cd23e53 ("secure_seq: use SipHash in place of MD5"), but the output remained truncated to 32-bit only. In order to exploit more bits from the hash, let's make the functions return the full 64-bit of siphash_3u32(). We also make sure the port offset calculation in __inet_hash_connect() remains done on 32-bit to avoid the need for div_u64_rem() and an extra cost on 32-bit systems. Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by: -
Jakub Kicinski authored
Jason A. Donenfeld says: ==================== wireguard patches for 5.18-rc6 In working on some other problems, I wound up leaning on the WireGuard CI more than usual and uncovered a few small issues with reliability. These are fairly low key changes, since they don't impact kernel code itself. One change does stick out in particular, though, which is the "make routing loop test non-fatal" commit. I'm not thrilled about doing this, but currently [1] remains unsolved, and I'm still working on a real solution to that (hopefully for 5.19 or 5.20 if I can come up with a good idea...), so for now that test just prints a big red warning instead. [1] https://lore.kernel.org/netdev/YmszSXueTxYOC41G@zx2c4.com/ ==================== Link: https://lore.kernel.org/r/20220504202920.72908-1-Jason@zx2c4.comSigned-off-by:
-
Jason A. Donenfeld authored
Rather than setting this once init is running, set panic_on_warn from the kernel command line, so that it catches splats from WireGuard initialization code and the various crypto selftests. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Jason A. Donenfeld authored
Use newer, more reliable package dependencies. These should hopefully reduce flakes. However, we keep the old iputils package, as it accumulated bugs after resulting in flakes on slow machines. Signed-off-by:
-
Jason A. Donenfeld authored
When moving to non-system toolchains, we inadvertantly killed the ability to use ccache. So instead, build ccache support into the test harness directly. Signed-off-by:
-
Jason A. Donenfeld authored
Rather than relying on the system to have cross toolchains available, simply download musl.cc's ones and use that libc.so, and then we use it to fill in a few missing platforms, such as riscv64, riscv64, powerpc64, and s390x. Since riscv doesn't have a second serial port in its device description, we have to use virtio's vport. This is actually the same situation on ARM, but we were previously hacking QEMU up to work around this, which required a custom QEMU. Instead just do the vport trick on ARM too. Signed-off-by:
-
Jason A. Donenfeld authored
The parallel tests were added to catch queueing issues from multiple cores. But what happens in reality when testing tons of processes is that these separate threads wind up fighting with the scheduler, and we wind up with contention in places we don't care about that decrease the chances of hitting a bug. So just do a test with the number of CPU cores, rather than trying to scale up arbitrarily. Signed-off-by:
-
Jason A. Donenfeld authored
I hate to do this, but I still do not have a good solution to actually fix this bug across architectures. So just disable it for now, so that the CI can still deliver actionable results. This commit adds a large red warning, so that at least the failure isn't lost forever, and hopefully this can be revisited down the line. Link: https://lore.kernel.org/netdev/CAHmME9pv1x6C4TNdL6648HydD8r+txpV4hTUXOBVkrapBXH4QQ@mail.gmail.com/ Link: https://lore.kernel.org/netdev/YmszSXueTxYOC41G@zx2c4.com/ Link: https://lore.kernel.org/wireguard/CAHmME9rNnBiNvBstb7MPwK-7AmAN0sOfnhdR=eeLrowWcKxaaQ@mail.gmail.com/Signed-off-by:
-
- 04 May, 2022 21 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: "IOMMU core: - Fix for a regression which could cause NULL-ptr dereferences Arm SMMU: - Fix off-by-one in SMMUv3 SVA TLB invalidation - Disable large mappings to workaround nvidia erratum Intel VT-d: - Handle PCI stop marker messages in IOMMU driver to meet the requirement of I/O page fault handling framework. - Calculate a feasible mask for non-aligned page-selective IOTLB invalidation. Apple DART IOMMU: - Fix potential NULL-ptr dereference - Set module owner" * tag 'iomm-fixes-v5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: Make sysfs robust for non-API groups iommu/dart: Add missing module owner to ops structure iommu/dart: check return value after calling platform_get_resource() iommu/vt-d: Drop stop marker messages iommu/vt-d: Calculate mask for non-aligned flushes iommu: arm-smmu: disable large page mappings for Nvidia arm-smmu iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range() -
https://github.com/cminyard/linux-ipmiLinus Torvalds authored
Pull IPMI fixes from Corey Minyard: "Fix some issues that were reported. This has been in for-next for a bit (longer than the times would indicate, I had to rebase to add some text to the headers) and these are fixes that need to go in" * tag 'for-linus-5.17-2' of https://github.com/cminyard/linux-ipmi: ipmi:ipmi_ipmb: Fix null-ptr-deref in ipmi_unregister_smi() ipmi: When handling send message responses, don't process the message
-
Robin Murphy authored
Groups created by VFIO backends outside the core IOMMU API should never be passed directly into the API itself, however they still expose their standard sysfs attributes, so we can still stumble across them that way. Take care to consider those cases before jumping into our normal assumptions of a fully-initialised core API group. Fixes: 3f6634d9 ("iommu: Use right way to retrieve iommu_ops") Reported-by:
Jan Stancek <jstancek@redhat.com> Tested-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/86ada41986988511a8424e84746dfe9ba7f87573.1651667683.git.robin.murphy@arm.comSigned-off-by:
Joerg Roedel <jroedel@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/gDavid S. Miller authored
it/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2022-05-03 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Hector Martin authored
This is required to make loading this as a module work. Signed-off-by:
Hector Martin <marcan@marcan.st> Fixes: 46d1fb07 ("iommu/dart: Add DART iommu driver") Reviewed-by:
Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20220502092238.30486-1-marcan@marcan.stSigned-off-by:
-
Mark Bloch authored
The cited commits didn't use proper matching on inner TTC as a result distribution of encapsulated packets wasn't symmetric between the physical ports. Fixes: 4c71ce50 ("net/mlx5: Support partial TTC rules") Fixes: 8e25a2bc ("net/mlx5: Lag, add support to create TTC tables for LAG port selection") Signed-off-by:
Mark Bloch <mbloch@nvidia.com> Reviewed-by:
Maor Gottlieb <maorg@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Moshe Shemesh authored
Double clear of reset requested state can lead to NULL pointer as it will try to delete the timer twice. This can happen for example on a race between abort from FW and pci error or reset. Avoid such case using test_and_clear_bit() to verify only one time reset requested state clear flow. Similarly use test_and_set_bit() to verify only one time reset requested state set flow. Fixes: 7dd6df32 ("net/mlx5: Handle sync reset abort event") Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Reviewed-by:
Maher Sanalla <msanalla@nvidia.com> Reviewed-by:
Shay Drory <shayd@nvidia.com> Signed-off-by:
-
Moshe Shemesh authored
The sync reset flow can lead to the following deadlock when poll_sync_reset() is called by timer softirq and waiting on del_timer_sync() for the same timer. Fix that by moving the part of the flow that waits for the timer to reset_reload_work. It fixes the following kernel Trace: RIP: 0010:del_timer_sync+0x32/0x40 ... Call Trace: <IRQ> mlx5_sync_reset_clear_reset_requested+0x26/0x50 [mlx5_core] poll_sync_reset.cold+0x36/0x52 [mlx5_core] call_timer_fn+0x32/0x130 __run_timers.part.0+0x180/0x280 ? tick_sched_handle+0x33/0x60 ? tick_sched_timer+0x3d/0x80 ? ktime_get+0x3e/0xa0 run_timer_softirq+0x2a/0x50 __do_softirq+0xe1/0x2d6 ? hrtimer_interrupt+0x136/0x220 irq_exit+0xae/0xb0 smp_apic_timer_interrupt+0x7b/0x140 apic_timer_interrupt+0xf/0x20 </IRQ> Fixes: 3c5193a8 ("net/mlx5: Use del_timer_sync in fw reset flow of halting poll") Signed-off-by:
-
Moshe Tal authored
Setting dscp2prio during the driver reload can cause dcb ieee app list to be not empty after the reload finish and as a result to a conflict between the priority trust state reported by the app and the state in the device register. Reset the dcb ieee app list on initialization in case this is conflicting with the register status. Fixes: 2a5e7a13 ("net/mlx5e: Add dcbnl dscp to priority support") Signed-off-by:
Moshe Tal <moshet@nvidia.com> Signed-off-by:
-
Ariel Levkovich authored
During TC action parsing, the can_offload callback is called before calling the action's main parsing callback. Later on, the can_offload callback is called again before handling the action's post_parse callback if exists. Since the main parsing callback might have changed and set parsing params for the rule, following can_offload checks might fail because some parsing params were already set. Specifically, the ct action main parsing sets the ct param in the parsing status structure and when the second can_offload for ct action is called, before handling the ct post parsing, it will return an error since it checks this ct param to indicate multiple ct actions which are not supported. Therefore, the can_offload call is removed from the post parsing handling to prevent such cases. This is allowed since the first can_offload call will ensure that the action can be offloaded and the fact the code reached the post parsing handling already means that the action can be offloaded. Fixes: 8300f225 ("net/mlx5e: Create new flow attr for multi table actions") Signed-off-by:
Ariel Levkovich <lariel@nvidia.com> Reviewed-by:
Paul Blakey <paulb@nvidia.com> Signed-off-by:
-
Paul Blakey authored
__mlx5_tc_ct_entry_put() queues release of tuple related to some ct FT, if that is the last reference to that tuple, the actual deletion of the tuple can happen after the FT is already destroyed and freed. Flush the used workqueue before destroying the ct FT. Fixes: a2173131 ("net/mlx5e: CT: manage the lifetime of the ct entry object") Reviewed-by:
Oz Shlomo <ozsh@nvidia.com> Signed-off-by:
-
Ariel Levkovich authored
When resolving the decap route device for a tunnel decap rule, the result may be an OVS internal port device. Prior to adding the support for internal port offload, such case would result in using the uplink as the default decap route device which allowed devices that can't support internal port offload to offload this decap rule. This behavior got broken by adding the internal port offload which will fail in case the device can't support internal port offload. To restore the old behavior, use the uplink device as the decap route as before when internal port offload is not supported. Fixes: b16eb3c8 ("net/mlx5: Support internal port as decap route device") Signed-off-by:
Maor Dickman <maord@nvidia.com> Signed-off-by:
-
Ariel Levkovich authored
ct_clear action is translated to clearing reg_c metadata which holds ct state and zone information using mod header actions. These actions are allocated during the actions parsing, as part of the flow attributes main mod header action list. If ct action exists in the rule, the flow's main mod header is used only in the post action table rule, after the ct tables which set the ct info in the reg_c as part of the ct actions. Therefore, if the original rule has a ct_clear action followed by a ct action, the ct action reg_c setting will be done first and will be followed by the ct_clear resetting reg_c and overwriting the ct info. Fix this by moving the ct_clear mod header actions allocation from the ct action parsing stage to the ct action post parsing stage where it is already known if ct_clear is followed by a ct action. In such case, we skip the mod header actions allocation for the ct clear since the ct action will write to reg_c anyway after clearing it. Fixes: 806401c2 ("net/mlx5e: CT, Fix multiple allocations and memleak of mod acts") Signed-off-by:
Roi Dayan <roid@nvidia.com> Reviewed-by:
-
Vlad Buslov authored
Referenced change added check to skip updating fib when new fib instance has same or lower priority. However, new fib instance can be an update on same dst address as existing one even though the structure is another instance that has different address. Ignoring events on such instances causes multipath LAG state to not be correctly updated. Track 'dst' and 'dst_len' fields of fib event fib_entry_notifier_info structure and don't skip events that have the same value of that fields. Fixes: ad11c4f1 ("net/mlx5e: Lag, Only handle events from highest priority multipath entry") Signed-off-by:
Vlad Buslov <vladbu@nvidia.com> Reviewed-by:
-
Vlad Buslov authored
Referenced change incorrectly sets single path fib_info even when LAG is not active. Fix it by moving call to mlx5_lag_fib_set() into conditional that verifies LAG state. Fixes: ad11c4f1 ("net/mlx5e: Lag, Only handle events from highest priority multipath entry") Signed-off-by:
-
Vlad Buslov authored
Recent commit that modified fib route event handler to handle events according to their priority introduced use-after-free[0] in mp->mfi pointer usage. The pointer now is not just cached in order to be compared to following fib_info instances, but is also dereferenced to obtain fib_priority. However, since mlx5 lag code doesn't hold the reference to fin_info during whole mp->mfi lifetime, it could be used after fib_info instance has already been freed be kernel infrastructure code. Don't ever dereference mp->mfi pointer. Refactor it to be 'const void*' type and cache fib_info priority in dedicated integer. Group fib_info-related data into dedicated 'fib' structure that will be further extended by following patches in the series. [0]: [ 203.588029] ================================================================== [ 203.590161] BUG: KASAN: use-after-free in mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core] [ 203.592386] Read of size 4 at addr ffff888144df2050 by task kworker/u20:4/138 [ 203.594766] CPU: 3 PID: 138 Comm: kworker/u20:4 Tainted: G B 5.17.0-rc7+ #6 [ 203.596751] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 203.598813] Workqueue: mlx5_lag_mp mlx5_lag_fib_update [mlx5_core] [ 203.600053] Call Trace: [ 203.600608] <TASK> [ 203.601110] dump_stack_lvl+0x48/0x5e [ 203.601860] print_address_description.constprop.0+0x1f/0x160 [ 203.602950] ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core] [ 203.604073] ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core] [ 203.605177] kasan_report.cold+0x83/0xdf [ 203.605969] ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core] [ 203.607102] mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core] [ 203.608199] ? mlx5_lag_init_fib_work+0x1c0/0x1c0 [mlx5_core] [ 203.609382] ? read_word_at_a_time+0xe/0x20 [ 203.610463] ? strscpy+0xa0/0x2a0 [ 203.611463] process_one_work+0x722/0x1270 [ 203.612344] worker_thread+0x540/0x11e0 [ 203.613136] ? rescuer_thread+0xd50/0xd50 [ 203.613949] kthread+0x26e/0x300 [ 203.614627] ? kthread_complete_and_exit+0x20/0x20 [ 203.615542] ret_from_fork+0x1f/0x30 [ 203.616273] </TASK> [ 203.617174] Allocated by task 3746: [ 203.617874] kasan_save_stack+0x1e/0x40 [ 203.618644] __kasan_kmalloc+0x81/0xa0 [ 203.619394] fib_create_info+0xb41/0x3c50 [ 203.620213] fib_table_insert+0x190/0x1ff0 [ 203.621020] fib_magic.isra.0+0x246/0x2e0 [ 203.621803] fib_add_ifaddr+0x19f/0x670 [ 203.622563] fib_inetaddr_event+0x13f/0x270 [ 203.623377] blocking_notifier_call_chain+0xd4/0x130 [ 203.624355] __inet_insert_ifa+0x641/0xb20 [ 203.625185] inet_rtm_newaddr+0xc3d/0x16a0 [ 203.626009] rtnetlink_rcv_msg+0x309/0x880 [ 203.626826] netlink_rcv_skb+0x11d/0x340 [ 203.627626] netlink_unicast+0x4cc/0x790 [ 203.628430] netlink_sendmsg+0x762/0xc00 [ 203.629230] sock_sendmsg+0xb2/0xe0 [ 203.629955] ____sys_sendmsg+0x58a/0x770 [ 203.630756] ___sys_sendmsg+0xd8/0x160 [ 203.631523] __sys_sendmsg+0xb7/0x140 [ 203.632294] do_syscall_64+0x35/0x80 [ 203.633045] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 203.634427] Freed by task 0: [ 203.635063] kasan_save_stack+0x1e/0x40 [ 203.635844] kasan_set_track+0x21/0x30 [ 203.636618] kasan_set_free_info+0x20/0x30 [ 203.637450] __kasan_slab_free+0xfc/0x140 [ 203.638271] kfree+0x94/0x3b0 [ 203.638903] rcu_core+0x5e4/0x1990 [ 203.639640] __do_softirq+0x1ba/0x5d3 [ 203.640828] Last potentially related work creation: [ 203.641785] kasan_save_stack+0x1e/0x40 [ 203.642571] __kasan_record_aux_stack+0x9f/0xb0 [ 203.643478] call_rcu+0x88/0x9c0 [ 203.644178] fib_release_info+0x539/0x750 [ 203.644997] fib_table_delete+0x659/0xb80 [ 203.645809] fib_magic.isra.0+0x1a3/0x2e0 [ 203.646617] fib_del_ifaddr+0x93f/0x1300 [ 203.647415] fib_inetaddr_event+0x9f/0x270 [ 203.648251] blocking_notifier_call_chain+0xd4/0x130 [ 203.649225] __inet_del_ifa+0x474/0xc10 [ 203.650016] devinet_ioctl+0x781/0x17f0 [ 203.650788] inet_ioctl+0x1ad/0x290 [ 203.651533] sock_do_ioctl+0xce/0x1c0 [ 203.652315] sock_ioctl+0x27b/0x4f0 [ 203.653058] __x64_sys_ioctl+0x124/0x190 [ 203.653850] do_syscall_64+0x35/0x80 [ 203.654608] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 203.666952] The buggy address belongs to the object at ffff888144df2000 which belongs to the cache kmalloc-256 of size 256 [ 203.669250] The buggy address is located 80 bytes inside of 256-byte region [ffff888144df2000, ffff888144df2100) [ 203.671332] The buggy address belongs to the page: [ 203.672273] page:00000000bf6c9314 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x144df0 [ 203.674009] head:00000000bf6c9314 order:2 compound_mapcount:0 compound_pincount:0 [ 203.675422] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff) [ 203.676819] raw: 002ffff800010200 0000000000000000 dead000000000122 ffff888100042b40 [ 203.678384] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 [ 203.679928] page dumped because: kasan: bad access detected [ 203.681455] Memory state around the buggy address: [ 203.682421] ffff888144df1f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 203.683863] ffff888144df1f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 203.685310] >ffff888144df2000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 203.686701] ^ [ 203.687820] ffff888144df2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 203.689226] ffff888144df2100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 203.690620] ================================================================== Fixes: ad11c4f1 ("net/mlx5e: Lag, Only handle events from highest priority multipath entry") Signed-off-by:Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
-
Mark Zhang authored
The arguments of update_buffer_lossy() is in a wrong order. Fix it. Fixes: 88b3d5c9 ("net/mlx5e: Fix port buffers cell size value") Signed-off-by:
Mark Zhang <markzhang@nvidia.com> Reviewed-by:
-
Vlad Buslov authored
Currently, match VLAN rule also matches packets that have multiple VLAN headers. This behavior is similar to buggy flower classifier behavior that has recently been fixed. Fix the issue by matching on outer_second_cvlan_tag with value 0 which will cause the HW to verify the packet doesn't contain second vlan header. Fixes: 699e96dd ("net/mlx5e: Support offloading tc double vlan headers match") Signed-off-by:
-
Aya Levin authored
Resource dump menu may span over more than a single page, support it. Otherwise, menu read may result in a memory access violation: reading outside of the allocated page. Note that page format of the first menu page contains menu headers while the proceeding menu pages contain only records. The KASAN logs are as follows: BUG: KASAN: slab-out-of-bounds in strcmp+0x9b/0xb0 Read of size 1 at addr ffff88812b2e1fd0 by task systemd-udevd/496 CPU: 5 PID: 496 Comm: systemd-udevd Tainted: G B 5.16.0_for_upstream_debug_2022_01_10_23_12 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x57/0x7d print_address_description.constprop.0+0x1f/0x140 ? strcmp+0x9b/0xb0 ? strcmp+0x9b/0xb0 kasan_report.cold+0x83/0xdf ? strcmp+0x9b/0xb0 strcmp+0x9b/0xb0 mlx5_rsc_dump_init+0x4ab/0x780 [mlx5_core] ? mlx5_rsc_dump_destroy+0x80/0x80 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x286/0x400 ? raw_spin_unlock_irqrestore+0x47/0x50 ? aomic_notifier_chain_register+0x32/0x40 mlx5_load+0x104/0x2e0 [mlx5_core] mlx5_init_one+0x41b/0x610 [mlx5_core] .... The buggy address belongs to the object at ffff88812b2e0000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 4048 bytes to the right of 4096-byte region [ffff88812b2e0000, ffff88812b2e1000) The buggy address belongs to the page: page:000000009d69807a refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88812b2e6000 pfn:0x12b2e0 head:000000009d69807a order:3 compound_mapcount:0 compound_pincount:0 flags: 0x8000000000010200(slab|head|zone=2) raw: 8000000000010200 0000000000000000 dead000000000001 ffff888100043040 raw: ffff88812b2e6000 0000000080040000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88812b2e1e80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88812b2e1f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88812b2e1f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88812b2e2000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88812b2e2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 12206b17 ("net/mlx5: Add support for resource dump") Signed-off-by:Aya Levin <ayal@nvidia.com> Reviewed-by:
-
Ariel Levkovich authored
When OVS internal port is the vtep device, the first decap rule is matching on the internal port's vport metadata value and then changes the metadata to be the uplink's value. Therefore, following rules on the tunnel, in chain > 0, should avoid matching on internal port metadata and use the uplink vport metadata instead. Select the uplink's metadata value for the source vport match in case the rule is in chain greater than zero, even if the tunnel route device is internal port. Fixes: 166f431e ("net/mlx5e: Add indirect tc offload of ovs internal port") Signed-off-by:
-
Jakub Kicinski authored
Michael Chan says: ==================== bnxt_en: Bug fixes This patch series includes 3 fixes: - Fix an occasional VF open failure. - Fix a PTP spinlock usage before initialization - Fix unnecesary RX packet drops under high TX traffic load. ==================== Link: https://lore.kernel.org/r/1651540392-2260-1-git-send-email-michael.chan@broadcom.comSigned-off-by:
-
