- 23 Mar, 2019 35 commits
-
-
Miguel Ojeda authored
[ Upstream commit 69ef9bc5 ] On module unload/remove, we need to ensure that work does not run after we have freed resources. Concretely, cancel_delayed_work() may return while the callback function is still running. From kernel/workqueue.c: The work callback function may still be running on return, unless it returns true and the work doesn't re-arm itself. Explicitly flush or use cancel_delayed_work_sync() to wait on it. Link: https://lore.kernel.org/lkml/20190204220952.30761-1-TheSven73@googlemail.com/Reported-by:
Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by:
Robin van der Gracht <robin@protonic.nl> Signed-off-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Paul Kocialkowski authored
[ Upstream commit f275a465 ] The driver's interrupt handler checks whether a message is currently being handled with the curr_msg pointer. When it is NULL, the interrupt is considered to be unexpected. Similarly, the i2c_start_transfer routine checks for the remaining number of messages to handle in num_msgs. However, these values are never cleared and always keep the message and number relevant to the latest transfer (which might be done already and the underlying message memory might have been freed). When an unexpected interrupt hits with the DONE bit set, the isr will then try to access the flags field of the curr_msg structure, leading to a fatal page fault. The msg_buf and msg_buf_remaining fields are also never cleared at the end of the transfer, which can lead to similar pitfalls. Fix these issues by introducing a cleanup function and always calling it after a transfer is finished. Fixes: e2474541 ("i2c: bcm2835: Fix hang for writing messages larger than 16 bytes") Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Shubhrajyoti Datta authored
[ Upstream commit d358def7 ] In case the hold bit is not needed we are carrying the old values. Fix the same by resetting the bit when not needed. Fixes the sporadic i2c bus lockups on National Instruments Zynq-based devices. Fixes: df8eb569 ("i2c: Add driver for Cadence I2C controller") Reported-by:
Kyle Roeschley <kyle.roeschley@ni.com> Acked-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Tested-by:
-
Huang Zijiang authored
[ Upstream commit c969c6e7 ] The of_find_device_by_node() takes a reference to the underlying device structure, we should release that reference. Signed-off-by:
Huang Zijiang <huang.zijiang@zte.com.cn> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jann Horn authored
[ Upstream commit 2c2ade81 ] The basic idea behind ->pagecnt_bias is: If we pre-allocate the maximum number of references that we might need to create in the fastpath later, the bump-allocation fastpath only has to modify the non-atomic bias value that tracks the number of extra references we hold instead of the atomic refcount. The maximum number of allocations we can serve (under the assumption that no allocation is made with size 0) is nc->size, so that's the bias used. However, even when all memory in the allocation has been given away, a reference to the page is still held; and in the `offset < 0` slowpath, the page may be reused if everyone else has dropped their references. This means that the necessary number of references is actually `nc->size+1`. Luckily, from a quick grep, it looks like the only path that can call page_frag_alloc(fragsz=1) is TAP with the IFF_NAPI_FRAGS flag, which requires CAP_NET_ADMIN in the init namespace and is only intended to be used for kernel testing and fuzzing. To test for this issue, put a `WARN_ON(page_ref_count(page) == 0)` in the `offset < 0` path, below the virt_to_page() call, and then repeatedly call writev() on a TAP device with IFF_TAP|IFF_NO_PI|IFF_NAPI_FRAGS|IFF_NAPI, with a vector consisting of 15 elements containing 1 byte each. Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
-
Qian Cai authored
[ Upstream commit 2f1ee091 ] This reverts commit fe53ca54 ("mm: use early_pfn_to_nid in page_ext_init"). When booting a system with "page_owner=on", start_kernel page_ext_init invoke_init_callbacks init_section_page_ext init_page_owner init_early_allocated_pages init_zones_in_node init_pages_in_zone lookup_page_ext page_to_nid The issue here is that page_to_nid() will not work since some page flags have no node information until later in page_alloc_init_late() due to DEFERRED_STRUCT_PAGE_INIT. Hence, it could trigger an out-of-bounds access with an invalid nid. UBSAN: Undefined behaviour in ./include/linux/mm.h:1104:50 index 7 is out of range for type 'zone [5]' Also, kernel will panic since flags were poisoned earlier with, CONFIG_DEBUG_VM_PGFLAGS=y CONFIG_NODE_NOT_IN_PAGE_FLAGS=n start_kernel setup_arch pagetable_init paging_init sparse_init sparse_init_nid memblock_alloc_try_nid_raw It did not handle it well in init_pages_in_zone() which ends up calling page_to_nid(). page:ffffea0004200000 is uninitialized and poisoned raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) page_owner info is not active (free page?) kernel BUG at include/linux/mm.h:990! RIP: 0010:init_page_owner+0x486/0x520 This means that assumptions behind commit fe53ca54 ("mm: use early_pfn_to_nid in page_ext_init") are incomplete. Therefore, revert the commit for now. A proper way to move the page_owner initialization to sooner is to hook into memmap initialization. Link: http://lkml.kernel.org/r/20190115202812.75820-1-cai@lca.pwSigned-off-by:
Qian Cai <cai@lca.pw> Acked-by:
Michal Hocko <mhocko@kernel.org> Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <yang.shi@linaro.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Yu Zhao authored
[ Upstream commit 414fd080 ] For dax pmd, pmd_trans_huge() returns false but pmd_huge() returns true on x86. So the function works as long as hugetlb is configured. However, dax doesn't depend on hugetlb. Link: http://lkml.kernel.org/r/20190111034033.601-1-yuzhao@google.comSigned-off-by:
Yu Zhao <yuzhao@google.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Keith Busch <keith.busch@intel.com> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Benjamin Coddington authored
[ Upstream commit d2ceb7e5 ] If nfs_page_async_flush() removes the page from the mapping, then we can't use page_file_mapping() on it as nfs_updatepate() is wont to do when receiving an error. Instead, push the mapping to the stack before the page is possibly truncated. Fixes: 8fc75bed ("NFS: Fix up return value on fatal errors in nfs_page_async_flush()") Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Yufen Yu authored
[ Upstream commit 96d7cb93 ] floppy_check_events() is supposed to return bit flags to say which events occured. We should return zero to say that no event flags are set. Only BIT(0) and BIT(1) are used in the caller. And .check_events interface also expect to return an unsigned int value. However, after commit a0c80efe, it may return -EINTR (-4u). Here, both BIT(0) and BIT(1) are cleared. So this patch shouldn't affect runtime, but it obviously is still worth fixing. Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: a0c80efe ("floppy: fix lock_fdc() signal handling") Signed-off-by:
Yufen Yu <yuyufen@huawei.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Andrea Claudi authored
[ Upstream commit 098e13f5 ] ipvs relies on nf_defrag_ipv6 module to manage IPv6 fragmentation, but lacks proper Kconfig dependencies and does not explicitly request defrag features. As a result, if netfilter hooks are not loaded, when IPv6 fragmented packet are handled by ipvs only the first fragment makes through. Fix it properly declaring the dependency on Kconfig and registering netfilter hooks on ip_vs_add_service() and ip_vs_new_dest(). Reported-by:
Li Shuang <shuali@redhat.com> Signed-off-by:
Andrea Claudi <aclaudi@redhat.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Ilan Peer authored
[ Upstream commit 6157ca0d ] When mac80211 requests the low level driver to stop an ongoing Tx aggregation, the low level driver is expected to call ieee80211_stop_tx_ba_cb_irqsafe() to indicate that it is ready to stop the session. The callback in turn schedules a worker to complete the session tear down, which in turn also handles the relevant state for the intermediate Tx queue. However, as this flow in asynchronous, the intermediate queue should be stopped and not continue servicing frames, as in such a case frames that are dequeued would be marked as part of an aggregation, although the aggregation is already been stopped. Fix this by stopping the intermediate Tx queue, before calling the low level driver to stop the Tx aggregation. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit a342083a ] We should be using flush_delayed_work() instead of flush_work() in matrix_keypad_stop() to ensure that we are not missing work that is scheduled but not yet put in the workqueue (i.e. its delay timer has not expired yet). Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit 33a841ce ] To ensure that TX work is not running after serio port has been torn down, let's flush it when closing the port. Reported-by:
Danilo Krummrich <danilokrummrich@dk-develop.de> Reviewed-by:
-
Dmitry Torokhov authored
[ Upstream commit 62844288 ] Updating LED state requires access to regmap and therefore we may sleep, so we could not do that directly form set_brightness() method. Historically we used private work to adjust the brightness, but with the introduction of set_brightness_blocking() we no longer need it. As a bonus, not having our own work item means we do not have use-after-free issue as we neglected to cancel outstanding work on driver unbind. Reported-by:
Sven Van Asbroeck <TheSven73@googlemail.com> Acked-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by:
-
Russell King authored
[ Upstream commit 50d6b3cf ] If we have a kernel configured for periodic timer interrupts, and we have cpuidle enabled, then we end up with CPU1 losing timer interupts after a hotplug. This can manifest itself in RCU stall warnings, or userspace becoming unresponsive. The problem is that the kernel initially wants to use the TWD timer for interrupts, but the TWD loses context when we enter the C3 cpuidle state. Nothing reprograms the TWD after idle. We have solved this in the past by switching to broadcast timer ticks, and cpuidle44xx switches to that mode at boot time. However, there is nothing to switch from periodic mode local timers after a hotplug operation. We call tick_broadcast_enter() in omap_enter_idle_coupled(), which one would expect would take care of the issue, but internally this only deals with one-shot local timers - tick_broadcast_enable() on the other hand only deals with periodic local timers. So, we need to call both. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> [tony@atomide.com: just standardized the subject line] Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Christoffer Dall authored
[ Upstream commit e761a927 ] We have two ways to reset a vcpu: - either through VCPU_INIT - or through a PSCI_ON call The first one is easy to reason about. The second one is implemented in a more bizarre way, as it is the vcpu that handles PSCI_ON that resets the vcpu that is being powered-on. As we need to turn the logic around and have the target vcpu to reset itself, we must take some preliminary steps. Resetting the VCPU state modifies the system register state in memory, but this may interact with vcpu_load/vcpu_put if running with preemption disabled, which in turn may lead to corrupted system register state. Address this by disabling preemption and doing put/load if required around the reset logic. Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Kuninori Morimoto authored
[ Upstream commit d9111d36 ] commit 4d230d12 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") added new rsnd_ssi_prepare() and moved rsnd_ssi_master_clk_start() to .prepare. But, ssi user count (= ssi->usrcnt) is incremented at .init (= rsnd_ssi_init()). Because of these timing exchange, ssi->usrcnt check at rsnd_ssi_master_clk_start() should be adjusted. Otherwise, 2nd master clock setup will be no check. This patch fixup this issue. Fixes: commit 4d230d12 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") Reported-by:
Yusuke Goda <yusuke.goda.sx@renesas.com> Reported-by:
Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Pierre-Louis Bossart authored
[ Upstream commit c16e1201 ] KASAN reports and additional traces point to out-of-bounds accesses to the dapm_up_seq and dapm_down_seq lookup tables. The indices used are larger than the array definition. Fix by adding missing entries for the new widget types in these two lookup tables, and align them with PGA values. Also the sequences for the following widgets were not defined. Since their values defaulted to zero, assign them explicitly snd_soc_dapm_input snd_soc_dapm_output snd_soc_dapm_vmid snd_soc_dapm_siggen snd_soc_dapm_sink Fixes: 8a70b454 ('ASoC: dapm: Add new widget type for constructing DAPM graphs on DSPs.'). Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Yizhuo authored
[ Upstream commit dc30e703 ] In function omap4_dsi_mux_pads(), local variable "reg" could be uninitialized if function regmap_read() returns -EINVAL. However, it will be used directly in the later context, which is potentially unsafe. Signed-off-by:
Yizhuo <yzhai003@ucr.edu> Signed-off-by:
-
Paweł Chmiel authored
[ Upstream commit 94803aef ] This patch fixes order of disable calls in pwm_vibrator_stop. Currently when starting device, we first enable vcc regulator and then setup and enable pwm. When stopping, we should do this in oposite order, so first disable pwm and then disable regulator. Previously order was the same as in start. Signed-off-by:
Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by:
-
Jonathan Bakker authored
[ Upstream commit 3ca232df ] pwm_vibrator_stop disables the regulator, but it can be called from multiple places, even when the regulator is already disabled. Fix this by using regulator_is_enabled check when starting and stopping device. Signed-off-by:
Jonathan Bakker <xc-racer2@live.ca> Signed-off-by:
-
Stefan Haberland authored
[ Upstream commit 4a8ef699 ] Dan Carpenter reported the following: The patch 52898025: "[S390] dasd: security and PSF update patch for EMC CKD ioctl" from Mar 8, 2010, leads to the following static checker warning: drivers/s390/block/dasd_eckd.c:4486 dasd_symm_io() error: using offset into zero size array 'psf_data[]' drivers/s390/block/dasd_eckd.c 4458 /* Copy parms from caller */ 4459 rc = -EFAULT; 4460 if (copy_from_user(&usrparm, argp, sizeof(usrparm))) ^^^^^^^ The user can specify any "usrparm.psf_data_len". They choose zero by mistake. 4461 goto out; 4462 if (is_compat_task()) { 4463 /* Make sure pointers are sane even on 31 bit. */ 4464 rc = -EINVAL; 4465 if ((usrparm.psf_data >> 32) != 0) 4466 goto out; 4467 if ((usrparm.rssd_result >> 32) != 0) 4468 goto out; 4469 usrparm.psf_data &= 0x7fffffffULL; 4470 usrparm.rssd_result &= 0x7fffffffULL; 4471 } 4472 /* alloc I/O data area */ 4473 psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL | GFP_DMA); 4474 rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL | GFP_DMA); 4475 if (!psf_data || !rssd_result) { kzalloc() returns a ZERO_SIZE_PTR (0x16). 4476 rc = -ENOMEM; 4477 goto out_free; 4478 } 4479 4480 /* get syscall header from user space */ 4481 rc = -EFAULT; 4482 if (copy_from_user(psf_data, 4483 (void __user *)(unsigned long) usrparm.psf_data, 4484 usrparm.psf_data_len)) That all works great. 4485 goto out_free; 4486 psf0 = psf_data[0]; 4487 psf1 = psf_data[1]; But now we're assuming that "->psf_data_len" was at least 2 bytes. Fix this by checking the user specified length psf_data_len. Fixes: 52898025 ("[S390] dasd: security and PSF update patch for EMC CKD ioctl") Reported-by:
Stefan Haberland <sth@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Steve Longerbeam authored
[ Upstream commit bb867d21 ] The CSI offsets are wrong for both CSI0 and CSI1. They are at physical address 0x1e030000 and 0x1e038000 respectively. Fixes: 2ffd48f2 ("gpu: ipu-v3: Add Camera Sensor Interface unit") Signed-off-by:
Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Julia Lawall authored
[ Upstream commit aa331201 ] The device node iterators perform an of_node_get on each iteration, so a jump out of the loop requires an of_node_put. Move the initialization channel->child = child; down to just before the call to imx_ldb_register so that intervening failures don't need to clear it. Add a label at the end of the function to do all the of_node_puts. The semantic patch that finds part of this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; iterator name for_each_child_of_node; @@ for_each_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | * return ...; ) ... } // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Alexander Shiyan authored
[ Upstream commit 2c0408dd ] The CSI0/CSI1 registers offset is at +0xe030000/+0xe038000 relative to the control module registers on IPUv3EX. This patch fixes wrong values for i.MX51 CSI0/CSI1. Fixes: 2ffd48f2 ("gpu: ipu-v3: Add Camera Sensor Interface unit") Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Signed-off-by:
-
Philipp Zabel authored
[ Upstream commit 4fb873c9 ] This patch fixes backtraces like the following when sending SIGKILL to a process with a currently pending plane update: [drm:ipu_plane_atomic_check] CRTC should be enabled [drm:drm_framebuffer_remove] *ERROR* failed to commit ------------[ cut here ]------------ WARNING: CPU: 3 PID: 63 at drivers/gpu/drm/drm_framebuffer.c:926 drm_framebuffer_remove+0x47c/0x498 atomic remove_fb failed with -22 Signed-off-by:
-
Zhang Zhijie authored
commit c1c214ad upstream. For chain mode in cipher(eg. AES-CBC/DES-CBC), the iv is continuously updated in the operation. The new iv value should be written to device register by software. Reported-by:
Eric Biggers <ebiggers@google.com> Fixes: 433cd2c6 ("crypto: rockchip - add crypto driver for rk3288") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by:
Zhang Zhijie <zhangzj@rock-chips.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zhang Zhijie authored
commit 4359669a upstream. In some cases, the nents of src scatterlist is different from dst scatterlist. So two variables are used to handle the nents of src&dst scatterlist. Reported-by:
-
Eric Biggers authored
commit 77568e53 upstream. Hash algorithms with an alignmask set, e.g. "xcbc(aes-aesni)" and "michael_mic", fail the improved hash tests because they sometimes produce the wrong digest. The bug is that in the case where a scatterlist element crosses pages, not all the data is actually hashed because the scatterlist walk terminates too early. This happens because the 'nbytes' variable in crypto_hash_walk_done() is assigned the number of bytes remaining in the page, then later interpreted as the number of bytes remaining in the scatterlist element. Fix it. Fixes: 900a081f ("crypto: ahash - Fix early termination in hash walk") Cc: stable@vger.kernel.org Signed-off-by:
-
Pankaj Gupta authored
commit 42e95d1f upstream. when the source sg contains more than 1 fragment and destination sg contains 1 fragment, the caam driver mishandle the buffers to be sent to caam. Fixes: f2147b88 ("crypto: caam - Convert GCM to new AEAD interface") Cc: <stable@vger.kernel.org> # 4.2+ Signed-off-by:
Pankaj Gupta <pankaj.gupta@nxp.com> Signed-off-by:
Arun Pathak <arun.pathak@nxp.com> Reviewed-by:
Horia Geanta <horia.geanta@nxp.com> Signed-off-by:
-
Zhi Jin authored
commit a1d75dad upstream. There is a bug in the channel allocation logic that leads to an endless loop when looking for a contiguous range of channels in a range with a mixture of free and occupied channels. For example, opening three consequtive channels, closing the first two and requesting 4 channels in a row will trigger this soft lockup. The bug is that the search loop forgets to skip over the range once it detects that one channel in that range is occupied. Restore the original intent to the logic by fixing the omission. Signed-off-by:
Zhi Jin <zhi.jin@intel.com> Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 7bd1d409 ("stm class: Introduce an abstraction for System Trace Module devices") CC: stable@vger.kernel.org # v4.4+ Signed-off-by:
-
Krzysztof Kozlowski authored
commit 2ea8bab4 upstream. Fix NULL pointer exception on device unbind when device tree does not contain "has-touchscreen" property. In such case the input device is not registered so it should not be unregistered. $ echo "12d10000.adc" > /sys/bus/platform/drivers/exynos-adc/unbind Unable to handle kernel NULL pointer dereference at virtual address 00000474 ... (input_unregister_device) from [<c0772060>] (exynos_adc_remove+0x20/0x80) (exynos_adc_remove) from [<c0587d5c>] (platform_drv_remove+0x20/0x40) (platform_drv_remove) from [<c05860f0>] (device_release_driver_internal+0xdc/0x1ac) (device_release_driver_internal) from [<c0583ecc>] (unbind_store+0x60/0xd4) (unbind_store) from [<c031b89c>] (kernfs_fop_write+0x100/0x1e0) (kernfs_fop_write) from [<c029709c>] (__vfs_write+0x2c/0x17c) (__vfs_write) from [<c0297374>] (vfs_write+0xa4/0x184) (vfs_write) from [<c0297594>] (ksys_write+0x4c/0xac) (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28) Fixes: 2bb8ad9b ("iio: exynos-adc: add experimental touchscreen support") Cc: <stable@vger.kernel.org> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
S.j. Wang authored
commit cc29ea00 upstream. The ESAI_xCR_xWA is xCR's bit, not the xCCR's bit, driver set it to wrong register, correct it. Fixes 43d24e76 ("ASoC: fsl_esai: Add ESAI CPU DAI driver") Cc: <stable@vger.kernel.org> Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Ackedy-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
-
zhengbin authored
commit bb06c388 upstream. If msize is less than 4096, we should close and put trans, destroy tagpool, not just free client. This patch fixes that. Link: http://lkml.kernel.org/m/1552464097-142659-1-git-send-email-zhengbin13@huawei.com Cc: stable@vger.kernel.org Fixes: 574d356b ("9p/net: put a lower bound on msize") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Signed-off-by:
Dominique Martinet <dominique.martinet@cea.fr> Signed-off-by:
-
Hou Tao authored
commit 5e3cc1ee upstream. Use inode->i_lock to protect i_size_write(), else i_size_read() in generic_fillattr() may loop infinitely in read_seqcount_begin() when multiple processes invoke v9fs_vfs_getattr() or v9fs_vfs_getattr_dotl() simultaneously under 32-bit SMP environment, and a soft lockup will be triggered as show below: watchdog: BUG: soft lockup - CPU#5 stuck for 22s! [stat:2217] Modules linked in: CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4 Hardware name: Generic DT based system PC is at generic_fillattr+0x104/0x108 LR is at 0xec497f00 pc : [<802b8898>] lr : [<ec497f00>] psr: 200c0013 sp : ec497e20 ip : ed608030 fp : ec497e3c r10: 00000000 r9 : ec497f00 r8 : ed608030 r7 : ec497ebc r6 : ec497f00 r5 : ee5c1550 r4 : ee005780 r3 : 0000052d r2 : 00000000 r1 : ec497f00 r0 : ed608030 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: ac48006a DAC: 00000051 CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4 Hardware name: Generic DT based system Backtrace: [<8010d974>] (dump_backtrace) from [<8010dc88>] (show_stack+0x20/0x24) [<8010dc68>] (show_stack) from [<80a1d194>] (dump_stack+0xb0/0xdc) [<80a1d0e4>] (dump_stack) from [<80109f34>] (show_regs+0x1c/0x20) [<80109f18>] (show_regs) from [<801d0a80>] (watchdog_timer_fn+0x280/0x2f8) [<801d0800>] (watchdog_timer_fn) from [<80198658>] (__hrtimer_run_queues+0x18c/0x380) [<801984cc>] (__hrtimer_run_queues) from [<80198e60>] (hrtimer_run_queues+0xb8/0xf0) [<80198da8>] (hrtimer_run_queues) from [<801973e8>] (run_local_timers+0x28/0x64) [<801973c0>] (run_local_timers) from [<80197460>] (update_process_times+0x3c/0x6c) [<80197424>] (update_process_times) from [<801ab2b8>] (tick_nohz_handler+0xe0/0x1bc) [<801ab1d8>] (tick_nohz_handler) from [<80843050>] (arch_timer_handler_virt+0x38/0x48) [<80843018>] (arch_timer_handler_virt) from [<80180a64>] (handle_percpu_devid_irq+0x8c/0x240) [<801809d8>] (handle_percpu_devid_irq) from [<8017ac20>] (generic_handle_irq+0x34/0x44) [<8017abec>] (generic_handle_irq) from [<8017b344>] (__handle_domain_irq+0x6c/0xc4) [<8017b2d8>] (__handle_domain_irq) from [<801022e0>] (gic_handle_irq+0x4c/0x88) [<80102294>] (gic_handle_irq) from [<80101a30>] (__irq_svc+0x70/0x98) [<802b8794>] (generic_fillattr) from [<8056b284>] (v9fs_vfs_getattr_dotl+0x74/0xa4) [<8056b210>] (v9fs_vfs_getattr_dotl) from [<802b8904>] (vfs_getattr_nosec+0x68/0x7c) [<802b889c>] (vfs_getattr_nosec) from [<802b895c>] (vfs_getattr+0x44/0x48) [<802b8918>] (vfs_getattr) from [<802b8a74>] (vfs_statx+0x9c/0xec) [<802b89d8>] (vfs_statx) from [<802b9428>] (sys_lstat64+0x48/0x78) [<802b93e0>] (sys_lstat64) from [<80101000>] (ret_fast_syscall+0x0/0x28) [dominique.martinet@cea.fr: updated comment to not refer to a function in another subsystem] Link: http://lkml.kernel.org/r/20190124063514.8571-2-houtao1@huawei.com Cc: stable@vger.kernel.org Fixes: 7549ae3e ("9p: Use the i_size_[read, write]() macros instead of using inode->i_size directly.") Reported-by:
Xing Gaopeng <xingaopeng@huawei.com> Signed-off-by:
Hou Tao <houtao1@huawei.com> Signed-off-by:
-
- 19 Mar, 2019 5 commits
-
-
Greg Kroah-Hartman authored
-
Zha Bin authored
commit 7fbe078c upstream. The vsock core only supports 32bit CID, but the Virtio-vsock spec define CID (dst_cid and src_cid) as u64 and the upper 32bits is reserved as zero. This inconsistency causes one bug in vhost vsock driver. The scenarios is: 0. A hash table (vhost_vsock_hash) is used to map an CID to a vsock object. And hash_min() is used to compute the hash key. hash_min() is defined as: (sizeof(val) <= 4 ? hash_32(val, bits) : hash_long(val, bits)). That means the hash algorithm has dependency on the size of macro argument 'val'. 0. In function vhost_vsock_set_cid(), a 64bit CID is passed to hash_min() to compute the hash key when inserting a vsock object into the hash table. 0. In function vhost_vsock_get(), a 32bit CID is passed to hash_min() to compute the hash key when looking up a vsock for an CID. Because the different size of the CID, hash_min() returns different hash key, thus fails to look up the vsock object for an CID. To fix this bug, we keep CID as u64 in the IOCTLs and virtio message headers, but explicitly convert u64 to u32 when deal with the hash table and vsock core. Fixes: 834e772c ("vhost/vsock: fix use-after-free in network stack callers") Link: https://github.com/stefanha/virtio/blob/vsock/trunk/content.texSigned-off-by:
Zha Bin <zhabin@linux.alibaba.com> Reviewed-by:
Liu Jiang <gerry@linux.alibaba.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Shengjing Zhu <i@zhsj.me> Signed-off-by:
-
Xiao Ni authored
commit b761dcf1 upstream. In reshape_request it already adds len to sector_nr already. It's wrong to add len to sector_nr again after adding pages to bio. If there is bad block it can't copy one chunk at a time, it needs to goto read_more. Now the sector_nr is wrong. It can cause data corruption. Cc: stable@vger.kernel.org # v3.16+ Signed-off-by:
Xiao Ni <xni@redhat.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
kbuild test robot authored
commit c634dc6b upstream. Fixes: 400816f6 ("perf/x86/intel: Implement support for TSX Force Abort") Signed-off-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: kbuild-all@01.org Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190313184243.GA10820@lkp-sb-ep06Signed-off-by:
-
Peter Zijlstra authored
commit ede271b0 upstream. Through: validate_event() x86_pmu.get_event_constraints(.idx=-1) tfa_get_event_constraints() dyn_constraint() cpuc->constraint_list[-1] is used, which is an obvious out-of-bound access. In this case, simply skip the TFA constraint code, there is no event constraint with just PMC3, therefore the code will never result in the empty set. Fixes: 400816f6 ("perf/x86/intel: Implement support for TSX Force Abort") Reported-by:
Tony Jones <tonyj@suse.com> Reported-by:
"DSouza, Nelson" <nelson.dsouza@intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
