- 24 Jul, 2007 24 commits
-
-
Ayaz Abdulla authored
This patch contains new device ids for MCP73 chipset. Signed-Off-By:
Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Chris Snook authored
Sparse (correctly) thinks this function should be static. Make it so. Signed-off-by:
Chris Snook <csnook@redhat.com> Signed-off-by:
-
Jan-Bernd Themann authored
net_poll support for eHEA added Signed-off-by:
Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by:
-
Adrian Bunk authored
The Coverity checker noted that we've already dereferenced "dev" when we check whether it's NULL. Since it's impossible that "dev" is NULL at this place this patch removes the NULL check. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Maciej W. Rozycki authored
This is a change to remove a local hack in favour to __maybe_unused that has been recently added. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
-
Andy Fleming authored
phy_read() returns a negative number if there's an error, but the error-checking code in the Vitesse driver's config_intr function triggers if phy_read() returns non-zero. Correct that. Signed-off-by:
Andy Fleming <afleming@freescale.com> Signed-off-by:
-
Masakazu Mokuno authored
Reduced allocation size for rx skb buffers, from 2308 bytes to 1356 per buffer. Signed-off-by:
Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by:
-
Jay Cliburn authored
Use constants already provided by the kernel for ethernet related lengths. Signed-off-by:
Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by:
-
Jay Cliburn authored
s/dam/dma Signed-off-by:
-
Jay Cliburn authored
Change the threshold number of descriptors used to trigger CMB writes. The vendor reports that under certain conditions this will reduce the number of unnecessary tx interrupts and improve rx performance. This change is lifted directly from vendor version 1.2.40.2 of the L1 driver. Signed-off-by:
-
Jay Cliburn authored
The DMA engine setup contains a typo that can result in an incorrect dmaw_block setting. Signed-off-by:
-
Jay Cliburn authored
Change tpd_avail() to atl1_tpd_avail(). Signed-off-by:
-
Masakazu Mokuno authored
Fixed rare issue that 'lv1_net_start_rx_dma failed, status=-9" was shown in dmesg. This meant restarting rx DMA had been rejected by the hypervisor. This issue would caused if the guest os requested starting DMA when the hypervisor thought the DMA was in progress. The state machine for DMA status of the hypervisor would be updated by processing interrupt in the hypervisor. Thus we should wait for the interrupt delivery before restarting DMA. Signed-off-by:
-
Masakazu Mokuno authored
Removed use of netif_poll_enable() in open function. Signed-off-by:
-
Masakazu Mokuno authored
Use net_device name for registration of irq as many network drivers do. Signed-off-by:
-
Masakazu Mokuno authored
Removed the statistics information from private structre. Instead, use net_device_stats in net_device structure. Signed-off-by:
-
Masakazu Mokuno authored
Removed conditional ethtool support. Always enabled. Signed-off-by:
-
Masakazu Mokuno authored
Removed defines no longer used. Signed-off-by:
-
Masakazu Mokuno authored
gelic: TX descriptor handling cleanup - Emitted return value of NETDEV_TX_LOCKED when DMA map or kick failure. Now it would free the skb, update drop packet statistics and return OK. Requested from Jeff Garzik. - Enable tx queue if number of free descriptors are more than 2 - Fixed descriptor leak if dma map for second descriptor failed - Stopped calling xmit handler from interrupt handler in order to recheck tx queue. Instead, call appropriate helper functions. Signed-off-by: -
Masakazu Mokuno authored
- Removed the embarrassing definition which was used in only one place. - Fixed wrong initialization of dmac_cmd_status. Signed-off-by:
-
Masakazu Mokuno authored
Fixed the bug that calculation of the address of rx descriptor was wrong. Signed-off-by:
-
dhananjay@netxen.com authored
The firmware should be loaded after resetting hardware during PCI probe, besides module unload. This fixes issue with 2nd port of multiport adapter on powerpc blades. This patch also fixes a bug that PCI resources are not freed if dma watchdog shutdown failed. The dma watchdog poll messages during module unload are also suppressed. Signed-off-by:
Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by:
Milan Bag <mbag@netxen.com> Signed-off-by:
Wen Xiong <wenxiong@us.ibm.com> Signed-off-by:
-
Li Yang authored
Adds netif message level control to the ucc_geth driver. The level can be set by module parameter and ethtool. Signed-off-by:
Li Yang <leoli@freescale.com> Signed-off-by:
-
Li Yang authored
The patch enables statistics in ucc_geth and adds ethtool support to ucc_geth driver. Signed-off-by:
-
- 22 Jul, 2007 16 commits
-
-
Linus Torvalds authored
Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
Andi Kleen authored
This avoids a conflict with sparse builds. Reported by Alexey Dobriyan, fix suggested by Al Viro Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Eric W. Biederman authored
The recent 9p commit: bd238fb4 that supposedly only moved files also introduced a new 9p sysctl interface that did not properly register it's sysctl binary numbers. And since it was only for debugging clearly did not need a binary fast path in any case. So this patch just remove the binary numbers. See Documentation/sysctl/ctl_unnumbered.txt for more details. While I was at it I cleaned up the sysctl initializers a little as well so there is less to read. Cc: Latchesar Ionkov <lucho@ionkov.net> Cc: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Linus Nilsson authored
Fix a typo in SubmittingPatches where "probably" was spelt "probabally". Signed-off-by:
Linus Nilsson <lajnold@gmail.com> Signed-off-by:
-
Linus Nilsson authored
Change a headline to reflect that there are three main types of kernel locking, not two. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ehca: Support small QP queues IB/ehca: Make internal_create/destroy_qp() static IB/ehca: Move ehca2ib_return_code() out of line IB/ehca: Generate async event when SRQ limit reached IB/ehca: Support large page MRs IB/mlx4: Fix error path in create_qp_common() mlx4_core: Change command token on timeout IB/mthca: Change command token on timeout IB/ipath: Remove ipath_layer dead code IB/mlx4: Fix leaks in __mlx4_ib_modify_qp
-
Al Viro authored
Now that the last inlined instances are gone, all that is left to do is turning disable_irq_nosync on arm26 and m68k from defines to aliases and we are all set - we can make these externs in linux/interrupt.h uncoditional and kill remaining instances in asm/irq.h Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (60 commits) [SCSI] libsas: make ATA functions selectable by a config option [SCSI] bsg: unexport sg v3 helper functions [SCSI] bsg: fix bsg_unregister_queue [SCSI] bsg: make class backlinks [SCSI] 3w-9xxx: add support for 9690SA [SCSI] bsg: fix bsg_register_queue error path [SCSI] ESP: Increase ESP_BUS_TIMEOUT to 275. [SCSI] libsas: fix scr_read/write users and update the libata documentation [SCSI] mpt fusion: update Kconfig help [SCSI] scsi_transport_sas: add destructor for bsg [SCSI] iscsi_tcp: buggered kmalloc() [SCSI] qla2xxx: Update version number to 8.02.00-k2. [SCSI] qla2xxx: Add ISP25XX support. [SCSI] qla2xxx: Use pci_try_set_mwi(). [SCSI] qla2xxx: Use PCI-X/PCI-Express read control interfaces. [SCSI] qla2xxx: Re-factor isp_operations to static structures. [SCSI] qla2xxx: Validate mid-layer 'underflow' during check-condition handling. [SCSI] qla2xxx: Correct setting of 'current' and 'supported' speeds during FDMI registration. [SCSI] qla2xxx: Generalize iIDMA support. [SCSI] qla2xxx: Generalize FW-Interface-2 support. ...
-
James Bottomley authored
Not everyone wants libsas automatically to pull in libata. This patch makes the behaviour configurable, so you can build libsas with or without ATA support. Signed-off-by:James Bottomley <James.Bottomley@SteelEye.com>
-
Linus Torvalds authored
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (60 commits) [ARM] 4524/1: S3C: Move register out of include/asm-arm/arch-s3c2410 [ARM] 4523/1: S3C: Remove FIFO_MAX from uncompression headers [ARM] 4522/1: S3C: split include/asm-arm/arch/memory.h [ARM] 4521/2: S3C: Reorganise VA mapping headers [ARM] 4520/1: S3C: Remove old VA values from static map [ARM] 4519/1: S3C: split S3C2400 values out of S3C24XX map.h [ARM] 4518/1: S3C: Rename watchdog configuration options [ARM] 4517/1: S3C: Fix debug macros for ARM926 output [ARM] 4516/1: S3C: Fix uncompressor serial output for ARM926 [ARM] 4515/1: S3C: Move uncompress code to plat-s3c [ARM] 4514/1: S3C: Rename DEBUG_S3C2410_PORT and DEBUG_S3C_UART [ARM] 4513/1: S3C: Rename CONFIG_S3C2410_LOWLEVEL_UART_PORT [ARM] 4512/1: S3C: rename the debug macros for per-cpu updates [ARM] 4511/1: S3C: updated LLSERIAL Kconfig defines for CPU support [ARM] 4510/1: S3C: split debug-macro support into plat-s3c [ARM] 4509/1: S3C: Create initial arch/arm/plat-s3c [ARM] 4508/1: S3C: Move items to include/asm-arm/plat-s3c [ARM] 4461/1: MXC platform and i.MX31ADS core support [ARM] 4507/1: pxa2xx clock_event_device [ARM] 4497/1: Only allow safe cache configurations on ARMv6 and later ...
-
git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds authored
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: Convert from struct class_device to struct device leds: leds-gpio for ngw100 leds: Add warning printks in error paths leds: Fix trigger unregister_simple if register_simple fails leds: Use menuconfig objects II - LED leds: Teach leds-gpio to handle timer-unsafe GPIOs leds: Add generic GPIO LED driver
-
git://git.o-hand.com/linux-rpurdie-backlightLinus Torvalds authored
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: leds: cr_bllcd.c: build fix backlight: Convert from struct class_device to struct device backlight: Fix order of Kconfig entries
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-currentLinus Torvalds authored
* 'audit.b39' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: [PATCH] get rid of AVC_PATH postponed treatment [PATCH] allow audit filtering on bit & operations [PATCH] audit: fix broken class-based syscall audit [PATCH] Make IPC mode consistent
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Clean up duplicate includes in drivers/macintosh/ [POWERPC] Quiet section mismatch warning on pcibios_setup [POWERPC] init and exit markings for hvc_iseries [POWERPC] Quiet section mismatch in hvc_rtas.c [POWERPC] Constify of_platform_driver match_table [POWERPC] hvcs: Make some things static and const [POWERPC] Constify of_platform_driver name [POWERPC] MPIC protected sources [POWERPC] of_detach_node()'s device node argument cannot be const [POWERPC] Fix ARCH=ppc builds [POWERPC] mv64x60: Use mutex instead of semaphore [POWERPC] Allow smp_call_function_single() to current cpu [POWERPC] Allow exec faults on readable areas on classic 32-bit PowerPC [POWERPC] Fix future firmware feature fixups function failure [POWERPC] fix showing xmon help [POWERPC] Make xmon_write accept a const buffer [POWERPC] Fix misspelled "CONFIG_CHECK_CACHE_COHERENCY" Kconfig option. [POWERPC] cell: CONFIG_SPE_BASE is a typo
-
Andi Kleen authored
Fix WARNING: vmlinux.o(.data+0x99): Section mismatch: reference to .init.text:xen_start_kernel (between 'startup_xen' and 'boot_gdt_descr') Signed-off-by:
-
Andi Kleen authored
Signed-off-by:
-
