- 13 Jun, 2017 37 commits
-
-
Kevin Barnett authored
Only register for controller events that driver supports cleanup event handling. Reviewed-by:
Scott Benesh <scott.benesh@microsemi.com> Signed-off-by:
Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Kevin Barnett authored
put in SIS mode during initialization. support kexec/kdump Reviewed-by:
Scott Teel <scott.teel@microsemi.com> Signed-off-by:
-
Kevin Barnett authored
tell smartpqi controller to generate a checkpoint for rare lockup conditions. Reviewed-by:
-
Kevin Barnett authored
add support for setting PCIe completion timeout. Reviewed-by:
-
Kevin Barnett authored
minor cleanup of interrupt initialization and tear-down. Reviewed-by:
-
Kevin Barnett authored
correct a problem caused by holding a spinlock during device deletion. Reviewed-by:
-
Don Brace authored
Reviewed-by:
-
Don Brace authored
- simplify the driver - there are a lot of quirky racy conditions not handled - causes more aborts/resets when the number of commands to be aborted is large, such as in multi-path fail-overs. - has been turned off in our internal driver since 8/31/2015 Reviewed-by:
-
Don Brace authored
- Block I/O requests with 0 length transfers which go down the ioaccel path. This causes lockup issues down in the basecode. - These issues have been fixed, but there are customers who are experiencing the issues when running older firmware. Reviewed-by:
-
Scott Teel authored
create new worker thread to monitor controller events - both the rescan and event monitor workers can cause a rescan to occur however for multipath we have found that we need to respond faster than the normal scheduled rescan interval for path fail-overs. - getting controller events only involves reading a register, but the rescan worker can obtain an updated LUN list when there is a PTRAID device present. - move common code to a separate function. advantages: - detect controller events more frequently. - leave rescan thread interval at 30 seconds. Reviewed-by:
-
Don Brace authored
- queue depth assignment not in correct place, had no effect. Reviewed-by:
-
Don Brace authored
- mark device state sooner. Reviewed-by:
-
Don Brace authored
- call scsi_done when the command completes. Reviewed-by:
-
Don Brace authored
- schedule another scan. - mark current scan as completed. Reviewed-by:
-
Don Brace authored
Prevent enclosure resets. Reviewed-by:
Scott Teel <scott.tell@microsemi.com> Reviewed-by:
-
Don Brace authored
Use the return from TUR as a check for the device state. Reviewed-by:
-
Don Brace authored
external shelves do not support BMICs. Reviewed-by:
-
Don Brace authored
- align with latest spec. - added __attribute((aligned(512))) Reviewed-by:
-
Raghava Aditya Renukunta authored
Update the driver version to 50834 Signed-off-by:
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by:
David Carroll <david.carroll@microsemi.com> Signed-off-by:
-
Raghava Aditya Renukunta authored
Remove reference to Series-9 HBA and created arc ctrl check function. Signed-off-by:
Prasad B Munirathnam <prasad.munirathnam@microsemi.com> Signed-off-by:
-
Raghava Aditya Renukunta authored
Added info and error messages in controller reset function to log information about the status of the IOP/SOFT reset. Signed-off-by:
-
Raghava Aditya Renukunta authored
Make sure that IOP and SOFT reset are enabled for both for both arc and hba1000 controllers. Signed-off-by:
-
Raghava Aditya Renukunta authored
Made sure that ioctl commands return in case of a controller reset. Signed-off-by:
-
Raghava Aditya Renukunta authored
The command thread checks the ctrl health periodically before sending updates to the controller. The function that it uses is aac_check_health which does more than get the health status. Signed-off-by:
-
Raghava Aditya Renukunta authored
Removed switch case and replaced with if mask checks. Moved KERNEL_PANIC check to when bled is less than 0. Signed-off-by:
-
Raghava Aditya Renukunta authored
Now the driver issues a soft reset and waits for the controller to be up and running by periodically checking on the status of the controller health registers. Also prevents ARC adapters from issuing soft reset if IOP resets failed. Signed-off-by:
-
Raghava Aditya Renukunta authored
Added function that waits with a timeout for the ctrl to be up and running after triggering an IOP reset. Also removed 30 sec sleep as it is not needed. Signed-off-by:
-
Raghava Aditya Renukunta authored
Reworked IOP reset to remove unneeded variable and created a helper function to notify fw of an imminent IOP reset. Signed-off-by:
-
Raghava Aditya Renukunta authored
The driver can now trigger IOP reset with a single reset mask. Removed code that retrieves a reset_mask from the firmware. Signed-off-by:
-
Raghava Aditya Renukunta authored
Log the status of the controller before issuing a reset. Signed-off-by:
-
Raghava Aditya Renukunta authored
Log the location of the scsi cmds before triggering a reset. This information is useful for debugging. Signed-off-by:
-
Raghava Aditya Renukunta authored
Change the completion wait time for the fibs in the reset and abort callback from 2 minutes to 15 seconds. 2 minutes is too long for waiting for completion. Signed-off-by:
-
Raghava Aditya Renukunta authored
Check health does not need to reset the ctrl but just return the controller health status. Signed-off-by:
-
Raghava Aditya Renukunta authored
The default queue depth for non NATIVE RAW disks is calculated from the number of fibs and number of disks or a max of 256. This causes poor disk IO performance. The fix is to set default qd based on the type of disks (SATA -32 and SAS -64) Signed-off-by:
-
Raghava Aditya Renukunta authored
The qd for ARC Native disks is calculated by dividing the max IO 1024 by the number of disks or 256 which ever is lower. This causes poor disk IO performance. The fix is set the qd based on the type of disk (SAS - 64 and SATA - 32). Signed-off-by:
-
Raghava Aditya Renukunta authored
The driver changed the DMA consistent map after consistent memory was allocated, this invalidated the IOMMU identity mapping. The fix was to make sure that we set the DMA consistent mask setting once depending on the controller card. Signed-off-by:
-
Raghava Aditya Renukunta authored
The raw srb commands do not requires memory that in the ZONE_DMA memory space. For 32bit srb commands use GFP_DMA32 to limit the memory to 32bit memory range (4GB). Signed-off-by:
-
- 11 Jun, 2017 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull key subsystem fixes from James Morris: "Here are a bunch of fixes for Linux keyrings, including: - Fix up the refcount handling now that key structs use the refcount_t type and the refcount_t ops don't allow a 0->1 transition. - Fix a potential NULL deref after error in x509_cert_parse(). - Don't put data for the crypto algorithms to use on the stack. - Fix the handling of a null payload being passed to add_key(). - Fix incorrect cleanup an uninitialised key_preparsed_payload in key_update(). - Explicit sanitisation of potentially secure data before freeing. - Fixes for the Diffie-Helman code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits) KEYS: fix refcount_inc() on zero KEYS: Convert KEYCTL_DH_COMPUTE to use the crypto KPP API crypto : asymmetric_keys : verify_pefile:zero memory content before freeing KEYS: DH: add __user annotations to keyctl_kdf_params KEYS: DH: ensure the KDF counter is properly aligned KEYS: DH: don't feed uninitialized "otherinfo" into KDF KEYS: DH: forbid using digest_null as the KDF hash KEYS: sanitize key structs before freeing KEYS: trusted: sanitize all key material KEYS: encrypted: sanitize all key material KEYS: user_defined: sanitize key payloads KEYS: sanitize add_key() and keyctl() key payloads KEYS: fix freeing uninitialized memory in key_update() KEYS: fix dereferencing NULL payload with nonzero length KEYS: encrypted: use constant-time HMAC comparison KEYS: encrypted: fix race causing incorrect HMAC calculations KEYS: encrypted: fix buffer overread in valid_master_desc() KEYS: encrypted: avoid encrypting/decrypting stack buffers KEYS: put keyring if install_session_keyring_to_cred() fails KEYS: Delete an error message for a failed memory allocation in get_derived_key() ... -
Linus Torvalds authored
Commit abb2ea7d ("compiler, clang: suppress warning for unused static inline functions") just caused more warnings due to re-defining the 'inline' macro. So undef it before re-defining it, and also add the 'notrace' attribute like the gcc version that this is overriding does. Maybe this makes clang happier. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
