- 08 Dec, 2021 30 commits
-
-
Maciej S. Szmigiero authored
And use it where s390 code would just access the memslot with the highest gfn directly. No functional change intended. Signed-off-by:
Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Reviewed-by:
Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <42496041d6af1c23b1cbba2636b344ca8d5fc3af.1638817641.git.maciej.szmigiero@oracle.com>
-
Maciej S. Szmigiero authored
The current memslots implementation only allows quick binary search by gfn, quick lookup by hva is not possible - the implementation has to do a linear scan of the whole memslots array, even though the operation being performed might apply just to a single memslot. This significantly hurts performance of per-hva operations with higher memslot counts. Since hva ranges can overlap between memslots an interval tree is needed for tracking them. [sean: handle interval tree updates in kvm_replace_memslot()] Signed-off-by: -
Maciej S. Szmigiero authored
Memslot ID to the corresponding memslot mappings are currently kept as indices in static id_to_index array. The size of this array depends on the maximum allowed memslot count (regardless of the number of memslots actually in use). This has become especially problematic recently, when memslot count cap was removed, so the maximum count is now full 32k memslots - the maximum allowed by the current KVM API. Keeping these IDs in a hash table (instead of an array) avoids this problem. Resolving a memslot ID to the actual memslot (instead of its index) will also enable transitioning away from an array-based implementation of the whole memslots structure in a later commit. Co-developed-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
-
Maciej S. Szmigiero authored
Since kvm_memslot_move_forward() can theoretically return a negative memslot index even when kvm_memslot_move_backward() returned a positive one (and so did not WARN) let's just move the warning to the common code. Signed-off-by:
-
Maciej S. Szmigiero authored
s390 arch has gfn_to_memslot_approx() which is almost identical to search_memslots(), differing only in that in case the gfn falls in a hole one of the memslots bordering the hole is returned. Add this lookup mode as an option to search_memslots() so we don't have two almost identical functions for looking up a memslot by its gfn. Signed-off-by:
-
Maciej S. Szmigiero authored
There is no point in recalculating from scratch the total number of pages in all memslots each time a memslot is created or deleted. Use KVM's cached nr_memslot_pages to compute the default max number of MMU pages. Note that even with nr_memslot_pages capped at ULONG_MAX we can't safely multiply it by KVM_PERMILLE_MMU_PAGES (20) since this operation can possibly overflow an unsigned long variable. Write this "* 20 / 1000" operation as "/ 50" instead to avoid such overflow. Signed-off-by:
-
Maciej S. Szmigiero authored
There is no point in calling kvm_mmu_change_mmu_pages() for memslot operations that don't change the total page count, so do it just for KVM_MR_CREATE and KVM_MR_DELETE. Signed-off-by:
-
Sean Christopherson authored
Stop making a full copy of the old memslot in __kvm_set_memory_region() now that metadata updates are handled by kvm_set_memslot(), i.e. now that the old memslot's dirty bitmap doesn't need to be referenced after the memslot and its pointer is modified/invalidated by kvm_set_memslot(). No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Sanity check the hva, gfn, and size of a userspace memory region only if any of those properties can change, i.e. skip the checks for DELETE and FLAGS_ONLY. KVM doesn't allow moving the hva or changing the size, a gfn change shows up as a MOVE even if flags are being modified, and the checks are pointless for the DELETE case as userspace_addr and gfn_base are zeroed by common KVM. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Play nice with a NULL @old or @new when handling memslot updates so that common KVM can pass NULL for one or the other in CREATE and DELETE cases instead of having to synthesize a dummy memslot. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Handle the generic memslot metadata, a.k.a. dirty bitmap, updates at the same time that arch handles it's own metadata updates, i.e. at memslot prepare and commit. This will simplify converting @new to a dynamically allocated object, and more closely aligns common KVM with architecture code. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Drop the @mem param from kvm_arch_{prepare,commit}_memory_region() now that its use has been removed in all architectures. No functional change intended. Signed-off-by: -
Sean Christopherson authored
Get the slot ID, hva, etc... from the "new" memslot instead of the userspace memory region when preparing/committing a memory region. This will allow a future commit to drop @mem from the prepare/commit hooks once all architectures convert to using "new". Opportunistically wait to get the various "new" values until after filtering out the DELETE case in anticipation of a future commit passing NULL for @new when deleting a memslot. Signed-off-by:
-
Sean Christopherson authored
Get the number of pages directly from the new memslot instead of computing the same from the userspace memory region when allocating memslot metadata. This will allow a future patch to drop @mem. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Get the gfn, size, and hva from the new memslot instead of the userspace memory region when preparing/committing memory region changes. This will allow a future commit to drop the @mem param. Note, this has a subtle functional change as KVM would previously reject DELETE if userspace provided a garbage userspace_addr or guest_phys_addr, whereas KVM zeros those fields in the "new" memslot when deleting an existing memslot. Arguably the old behavior is more correct, but there's zero benefit into requiring userspace to provide sane values for hva and gfn. Signed-off-by:
-
Sean Christopherson authored
For PPC HV, get the number of pages directly from the new memslot instead of computing the same from the userspace memory region, and explicitly check for !DELETE instead of inferring the same when toggling mmio_update. The motivation for these changes is to avoid referencing the @mem param so that it can be dropped in a future commit. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Remove an old (circa 2012) kvm_debug from kvm_arch_commit_memory_region() to print basic information when committing a memslot change. The primary motivation for removing the kvm_debug is to avoid using @mem, the user memory region, so that said param can be removed. Alternatively, the debug message could be converted to use @new, but that would require synthesizing select state to play nice with the DELETED case, which will pass NULL for @new in the future. And there's no argument to be had for dumping generic information in an arch callback, i.e. if there's a good reason for the debug message, then it belongs in common KVM code where all architectures can benefit. Signed-off-by:
-
Sean Christopherson authored
Get the slot ID, hva, etc... from the "new" memslot instead of the userspace memory region when preparing/committing a memory region. This will allow a future commit to drop @mem from the prepare/commit hooks once all architectures convert to using "new". Opportunistically wait to get the hva begin+end until after filtering out the DELETE case in anticipation of a future commit passing NULL for @new when deleting a memslot. Signed-off-by:
-
Sean Christopherson authored
Pass the "old" slot to kvm_arch_prepare_memory_region() and force arch code to handle propagating arch specific data from "new" to "old" when necessary. This is a baby step towards dynamically allocating "new" from the get go, and is a (very) minor performance boost on x86 due to not unnecessarily copying arch data. For PPC HV, copy the rmap in the !CREATE and !DELETE paths, i.e. for MOVE and FLAGS_ONLY. This is functionally a nop as the previous behavior would overwrite the pointer for CREATE, and eventually discard/ignore it for DELETE. For x86, copy the arch data only for FLAGS_ONLY changes. Unlike PPC HV, x86 needs to reallocate arch data in the MOVE case as the size of x86's allocations depend on the alignment of the memslot's gfn. Opportunistically tweak kvm_arch_prepare_memory_region()'s param order to match the "commit" prototype. Signed-off-by:
-
Sean Christopherson authored
Now that the address space ID is stored in every slot, including fake slots used for deletion, use the slot's as_id instead of passing in the redundant information as a param to kvm_set_memslot(). This will greatly simplify future memslot work by avoiding passing a large number of variables around purely to honor @as_id. Drop a comment in the DELETE path about new->as_id being provided purely for debug, as that's now a lie. No functional change intended. Signed-off-by:
-
Maciej S. Szmigiero authored
There is no need to copy the whole memslot data after releasing slots_arch_lock for a moment to install temporary memslots copy in kvm_set_memslot() since this lock only protects the arch field of each memslot. Just resync this particular field after reacquiring slots_arch_lock. Note, this also eliminates the need to manually clear the INVALID flag when restoring memslots; the "setting" of the INVALID flag was an unwanted side effect of copying the entire memslots. Since kvm_copy_memslots() has just one caller remaining now open-code it instead. Signed-off-by:
-
Sean Christopherson authored
Fold kvm_delete_memslot() into __kvm_set_memory_region() to free up the "kvm_delete_memslot()" name for use in a future helper. The delete logic isn't so complex/long that it truly needs a helper, and it will be simplified a wee bit further in upcoming commits. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Explicitly disallow creating more memslot pages than can fit in an unsigned long, KVM doesn't correctly handle a total number of memslot pages that doesn't fit in an unsigned long and remedying that would be a waste of time. For a 64-bit kernel, this is a nop as memslots are not allowed to overlap in the gfn address space. With a 32-bit kernel, userspace can at most address 3gb of virtual memory, whereas wrapping the total number of pages would require 4tb+ of guest physical memory. Even with x86's second address space for SMM, userspace would need to alias all of guest memory more than one _thousand_ times. And on older x86 hardware with MAXPHYADDR < 43, the guest couldn't actually access any of those aliases even if userspace lied about guest.MAXPHYADDR. On 390 and arm64, this is a nop as they don't support 32-bit hosts. On x86, practically speaking this is simply acknowledging reality as the existing kvm_mmu_calculate_default_mmu_pages() assumes the total number of pages fits in an "unsigned long". On PPC, this is likely a nop as every flavor of PPC KVM assumes gfns (and gpas!) fit in unsigned long. arch/powerpc/kvm/book3s_32_mmu_host.c goes a step further and fails the build if CONFIG_PTE_64BIT=y, which presumably means that it does't support 64-bit physical addresses. On MIPS, this is also likely a nop as the core MMU helpers assume gpas fit in unsigned long, e.g. see kvm_mips_##name##_pte. And finally, RISC-V is a "don't care" as it doesn't exist in any release, i.e. there is no established ABI to break. Signed-off-by:
-
Marc Zyngier authored
Now that the vcpu array is backed by an xarray, use the optimised iterator that matches the underlying data structure. Suggested-by:
Marc Zyngier <maz@kernel.org> Message-Id: <20211116160403.4074052-8-maz@kernel.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Marc Zyngier authored
Everywhere we use kvm_for_each_vpcu(), we use an int as the vcpu index. Unfortunately, we're about to move rework the iterator, which requires this to be upgrade to an unsigned long. Let's bite the bullet and repaint all of it in one go. Signed-off-by:
-
Marc Zyngier authored
At least on arm64 and x86, the vcpus array is pretty huge (up to 1024 entries on x86) and is mostly empty in the majority of the cases (running 1k vcpu VMs is not that common). This mean that we end-up with a 4kB block of unused memory in the middle of the kvm structure. Instead of wasting away this memory, let's use an xarray instead, which gives us almost the same flexibility as a normal array, but with a reduced memory usage with smaller VMs. Signed-off-by:
-
Marc Zyngier authored
As we are about to change the way vcpus are allocated, mandate the use of kvm_get_vcpu() instead of open-coding the access. Reviewed-by:
-
Marc Zyngier authored
As we are about to change the way vcpus are allocated, mandate the use of kvm_get_vcpu() instead of open-coding the access. Reviewed-by:
Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by:
-
Marc Zyngier authored
All architectures have similar loops iterating over the vcpus, freeing one vcpu at a time, and eventually wiping the reference off the vcpus array. They are also inconsistently taking the kvm->lock mutex when wiping the references from the array. Make this code common, which will simplify further changes. The locking is dropped altogether, as this should only be called when there is no further references on the kvm structure. Reviewed-by:
-
Paolo Bonzini authored
Fix the number of bits in the role, and simplify the explanation of why several bits or combinations of bits are redundant. Signed-off-by:
-
- 05 Dec, 2021 3 commits
-
-
Tom Lendacky authored
Currently, an SEV-ES guest is terminated if the validation of the VMGEXIT exit code or exit parameters fails. The VMGEXIT instruction can be issued from userspace, even though userspace (likely) can't update the GHCB. To prevent userspace from being able to kill the guest, return an error through the GHCB when validation fails rather than terminating the guest. For cases where the GHCB can't be updated (e.g. the GHCB can't be mapped, etc.), just return back to the guest. The new error codes are documented in the lasest update to the GHCB specification. Fixes: 291bd20d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT") Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Message-Id: <b57280b5562893e2616257ac9c2d4525a9aeeb42.1638471124.git.thomas.lendacky@amd.com> Signed-off-by:
-
Sean Christopherson authored
Use kvzalloc() to allocate KVM's buffer for SEV-ES's GHCB scratch area so that KVM falls back to __vmalloc() if physically contiguous memory isn't available. The buffer is purely a KVM software construct, i.e. there's no need for it to be physically contiguous. Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Sean Christopherson authored
Return appropriate error codes if setting up the GHCB scratch area for an SEV-ES guest fails. In particular, returning -EINVAL instead of -ENOMEM when allocating the kernel buffer could be confusing as userspace would likely suspect a guest issue. Fixes: 8f423a80 ("KVM: SVM: Support MMIO for an SEV-ES guest") Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
- 02 Dec, 2021 4 commits
-
-
Sean Christopherson authored
Bail from the page fault handler if the root shadow page was obsoleted by a memslot update. Do the check _after_ acuiring mmu_lock, as the TDP MMU doesn't rely on the memslot/MMU generation, and instead relies on the root being explicit marked invalid by kvm_mmu_zap_all_fast(), which takes mmu_lock for write. For the TDP MMU, inserting a SPTE into an obsolete root can leak a SP if kvm_tdp_mmu_zap_invalidated_roots() has already zapped the SP, i.e. has moved past the gfn associated with the SP. For other MMUs, the resulting behavior is far more convoluted, though unlikely to be truly problematic. Installing SPs/SPTEs into the obsolete root isn't directly problematic, as the obsolete root will be unloaded and dropped before the vCPU re-enters the guest. But because the legacy MMU tracks shadow pages by their role, any SP created by the fault can can be reused in the new post-reload root. Again, that _shouldn't_ be problematic as any leaf child SPTEs will be created for the current/valid memslot generation, and kvm_mmu_get_page() will not reuse child SPs from the old generation as they will be flagged as obsolete. But, given that continuing with the fault is pointess (the root will be unloaded), apply the check to all MMUs. Fixes: b7cccd39 ("KVM: x86/mmu: Fast invalidation for TDP MMU") Cc: stable@vger.kernel.org Cc: Ben Gardon <bgardon@google.com> Signed-off-by:
-
Dan Carpenter authored
The error paths in the prepare_vmcs02() function are supposed to set *entry_failure_code but this path does not. It leads to using an uninitialized variable in the caller. Fixes: 71f73470 ("KVM: nVMX: Load GUEST_IA32_PERF_GLOBAL_CTRL MSR on VM-Entry") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Message-Id: <20211130125337.GB24578@kili> Signed-off-by:
-
Paolo Bonzini authored
kvm_vcpu_apicv_active() returns false if a virtual machine has no in-kernel local APIC, however kvm_apicv_activated might still be true if there are no reasons to disable APICv; in fact it is quite likely that there is none because APICv is inhibited by specific configurations of the local APIC and those configurations cannot be programmed. This triggers a WARN: WARN_ON_ONCE(kvm_apicv_activated(vcpu->kvm) != kvm_vcpu_apicv_active(vcpu)); To avoid this, introduce another cause for APICv inhibition, namely the absence of an in-kernel local APIC. This cause is enabled by default, and is dropped by either KVM_CREATE_IRQCHIP or the enabling of KVM_CAP_IRQCHIP_SPLIT. Reported-by:
Ignat Korchagin <ignat@cloudflare.com> Fixes: ee49a893 ("KVM: x86: Move SVM's APICv sanity check to common x86", 2021-10-22) Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by:
-
Like Xu authored
If we run the following perf command in an AMD Milan guest: perf stat \ -e cpu/event=0x1d0/ \ -e cpu/event=0x1c7/ \ -e cpu/umask=0x1f,event=0x18e/ \ -e cpu/umask=0x7,event=0x18e/ \ -e cpu/umask=0x18,event=0x18e/ \ ./workload dmesg will report a #GP warning from an unchecked MSR access error on MSR_F15H_PERF_CTLx. This is because according to APM (Revision: 4.03) Figure 13-7, the bits [35:32] of AMD PerfEvtSeln register is a part of the event select encoding, which extends the EVENT_SELECT field from 8 bits to 12 bits. Opportunistically update pmu->reserved_bits for reserved bit 19. Reported-by:
Jim Mattson <jmattson@google.com> Fixes: ca724305 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Signed-off-by:
Like Xu <likexu@tencent.com> Message-Id: <20211118130320.95997-1-likexu@tencent.com> Signed-off-by:
-
- 30 Nov, 2021 3 commits
-
-
Paolo Bonzini authored
avic_set_running() passes the current CPU to avic_vcpu_load(), albeit via vcpu->cpu rather than smp_processor_id(). If the thread is migrated while avic_set_running runs, the call to avic_vcpu_load() can use a stale value for the processor id. Avoid this by blocking preemption over the entire execution of avic_set_running(). Reported-by:
-
Paolo Bonzini authored
There is nothing to synchronize if APICv is disabled, since neither other vCPUs nor assigned devices can set PIR.ON. Signed-off-by: -
Paolo Bonzini authored
Generally, kvm->lock is not taken for a long time, but sev_lock_two_vms is different: it takes vCPU locks inside, so userspace can hold it back just by calling a vCPU ioctl. Play it safe and use mutex_lock_killable. Message-Id: <20211123005036.2954379-13-pbonzini@redhat.com> Signed-off-by:
-
