- 04 Mar, 2019 30 commits
-
-
Vadim Pasternak authored
Extend initialization flow by query requests for chip resources data in order to obtain chip's specific capabilities, like the number of ports. Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vadim Pasternak authored
Extend input parameters list of command API in mlxsw_i2c_cmd() in order to support initialization commands. Up until now, only access commands were supported by I2C driver. Signed-off-by:
-
Vadim Pasternak authored
Change input parameter name "resource" to "res" in mlxsw_i2c_init() in order to align it with mlxsw_pci_init(). Signed-off-by:
-
Vadim Pasternak authored
Fix comment for mlxsw_i2c_write_cmd(). Signed-off-by:
-
Vadim Pasternak authored
Move mlxsw_pci_resources_query() to a common location to allow reuse by the different drivers and over all the supported physical buses. Rename it to mlxsw_core_resources_query(). Signed-off-by:
-
Vadim Pasternak authored
The minimal driver is chip independent and uses I2C bus for chip access. Its purpose is to support chassis management on systems equipped with Mellanox switch ASICs. For example from BMC (Board Management Controller) device. Expose a dummy netdev for each front panel port and implement basic ethtool operations to obtain QSFP/SFP module info through ethtool. Signed-off-by:
-
Vadim Pasternak authored
Replace "mlxsw_minimal" by "mlxsw_m" in order to improve code readability. Signed-off-by:
-
Vadim Pasternak authored
Move the implementation of ethtool module callbacks - .get_module_info() and .get_module_eeprom() - to a common location to allow reuse by the different mlxsw drivers. Signed-off-by:
-
David S. Miller authored
Boris Pismenny says: ==================== tls: Fix issues in tls_device This series fixes issues encountered in tls_device code paths, which were introduced recently. Additionally, this series includes a fix for tls software only receive flow, which causes corruption of payload received by user space applications. This series was tested using the OpenSSL integration of KTLS - https://github.com/mellan ==================== Signed-off-by:
-
Boris Pismenny authored
Currently, the receive function fails to handle records already decrypted by the device due to the commit mentioned below. This commit advances the TLS record sequence number and prepares the context to handle the next record. Fixes: fedf201e ("net: tls: Refactor control message handling on recv") Signed-off-by:
Boris Pismenny <borisp@mellanox.com> Reviewed-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
Eran Ben Elisha authored
Today, tls_sw_recvmsg is capable of using asynchronous mode to handle application data TLS records. Moreover, it assumes that if the cipher can be handled asynchronously, then all packets will be processed asynchronously. However, this assumption is not always true. Specifically, for AES-GCM in TLS1.2, it causes data corruption, and breaks user applications. This patch fixes this problem by separating the async capability from the decryption operation result. Fixes: c0ab4732 ("net/tls: Do not use async crypto for non-data records") Signed-off-by:
-
Boris Pismenny authored
TLS device cannot use the sw context. This patch returns the original tls device write space handler and moves the sw/device specific portions to the relevant files. Also, we remove the write_space call for the tls_sw flow, because it handles partial records in its delayed tx work handler. Fixes: a42055e8 ("net/tls: Add support for async encryption of records for performance") Signed-off-by:
-
Boris Pismenny authored
Cleanup the handling of partial records while fixing a bug where the tls_push_pending_closed_record function is using the software tls context instead of the hardware context. The bug resulted in the following crash: [ 88.791229] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 88.793271] #PF error: [normal kernel read fault] [ 88.794449] PGD 800000022a426067 P4D 800000022a426067 PUD 22a156067 PMD 0 [ 88.795958] Oops: 0000 [#1] SMP PTI [ 88.796884] CPU: 2 PID: 4973 Comm: openssl Not tainted 5.0.0-rc4+ #3 [ 88.798314] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 [ 88.800067] RIP: 0010:tls_tx_records+0xef/0x1d0 [tls] [ 88.801256] Code: 00 02 48 89 43 08 e8 a0 0b 96 d9 48 89 df e8 48 dd 4d d9 4c 89 f8 4d 8b bf 98 00 00 00 48 05 98 00 00 00 48 89 04 24 49 39 c7 <49> 8b 1f 4d 89 fd 0f 84 af 00 00 00 41 8b 47 10 85 c0 0f 85 8d 00 [ 88.805179] RSP: 0018:ffffbd888186fca8 EFLAGS: 00010213 [ 88.806458] RAX: ffff9af1ed657c98 RBX: ffff9af1e88a1980 RCX: 0000000000000000 [ 88.808050] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9af1e88a1980 [ 88.809724] RBP: ffff9af1e88a1980 R08: 0000000000000017 R09: ffff9af1ebeeb700 [ 88.811294] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 88.812917] R13: ffff9af1e88a1980 R14: ffff9af1ec13f800 R15: 0000000000000000 [ 88.814506] FS: 00007fcad2240740(0000) GS:ffff9af1f7880000(0000) knlGS:0000000000000000 [ 88.816337] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 88.817717] CR2: 0000000000000000 CR3: 0000000228b3e000 CR4: 00000000001406e0 [ 88.819328] Call Trace: [ 88.820123] tls_push_data+0x628/0x6a0 [tls] [ 88.821283] ? remove_wait_queue+0x20/0x60 [ 88.822383] ? n_tty_read+0x683/0x910 [ 88.823363] tls_device_sendmsg+0x53/0xa0 [tls] [ 88.824505] sock_sendmsg+0x36/0x50 [ 88.825492] sock_write_iter+0x87/0x100 [ 88.826521] __vfs_write+0x127/0x1b0 [ 88.827499] vfs_write+0xad/0x1b0 [ 88.828454] ksys_write+0x52/0xc0 [ 88.829378] do_syscall_64+0x5b/0x180 [ 88.830369] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 88.831603] RIP: 0033:0x7fcad1451680 [ 1248.470626] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 1248.472564] #PF error: [normal kernel read fault] [ 1248.473790] PGD 0 P4D 0 [ 1248.474642] Oops: 0000 [#1] SMP PTI [ 1248.475651] CPU: 3 PID: 7197 Comm: openssl Tainted: G OE 5.0.0-rc4+ #3 [ 1248.477426] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 [ 1248.479310] RIP: 0010:tls_tx_records+0x110/0x1f0 [tls] [ 1248.480644] Code: 00 02 48 89 43 08 e8 4f cb 63 d7 48 89 df e8 f7 9c 1b d7 4c 89 f8 4d 8b bf 98 00 00 00 48 05 98 00 00 00 48 89 04 24 49 39 c7 <49> 8b 1f 4d 89 fd 0f 84 af 00 00 00 41 8b 47 10 85 c0 0f 85 8d 00 [ 1248.484825] RSP: 0018:ffffaa0a41543c08 EFLAGS: 00010213 [ 1248.486154] RAX: ffff955a2755dc98 RBX: ffff955a36031980 RCX: 0000000000000006 [ 1248.487855] RDX: 0000000000000000 RSI: 000000000000002b RDI: 0000000000000286 [ 1248.489524] RBP: ffff955a36031980 R08: 0000000000000000 R09: 00000000000002b1 [ 1248.491394] R10: 0000000000000003 R11: 00000000ad55ad55 R12: 0000000000000000 [ 1248.493162] R13: 0000000000000000 R14: ffff955a2abe6c00 R15: 0000000000000000 [ 1248.494923] FS: 0000000000000000(0000) GS:ffff955a378c0000(0000) knlGS:0000000000000000 [ 1248.496847] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1248.498357] CR2: 0000000000000000 CR3: 000000020c40e000 CR4: 00000000001406e0 [ 1248.500136] Call Trace: [ 1248.500998] ? tcp_check_oom+0xd0/0xd0 [ 1248.502106] tls_sk_proto_close+0x127/0x1e0 [tls] [ 1248.503411] inet_release+0x3c/0x60 [ 1248.504530] __sock_release+0x3d/0xb0 [ 1248.505611] sock_close+0x11/0x20 [ 1248.506612] __fput+0xb4/0x220 [ 1248.507559] task_work_run+0x88/0xa0 [ 1248.508617] do_exit+0x2cb/0xbc0 [ 1248.509597] ? core_sys_select+0x17a/0x280 [ 1248.510740] do_group_exit+0x39/0xb0 [ 1248.511789] get_signal+0x1d0/0x630 [ 1248.512823] do_signal+0x36/0x620 [ 1248.513822] exit_to_usermode_loop+0x5c/0xc6 [ 1248.515003] do_syscall_64+0x157/0x180 [ 1248.516094] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1248.517456] RIP: 0033:0x7fb398bd3f53 [ 1248.518537] Code: Bad RIP value. Fixes: a42055e8 ("net/tls: Add support for async encryption of records for performance") Signed-off-by:
-
David S. Miller authored
Heiner Kallweit says: ==================== net: phy: clean up the old gen10g functions The old gen10g_ functions are mainly stubs and have been superseded by genphy_c45_ equivalents. So lets remove / hide the old functions as far as possible. ==================== Signed-off-by: -
Heiner Kallweit authored
genphy_no_soft_reset and gen10g_no_soft_reset are both the same no-ops, one is enough. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Heiner Kallweit authored
gen10g_read_status is deprecated, therefore stop exporting it. We don't want to encourage anybody to use it. Signed-off-by:
-
Heiner Kallweit authored
ETHTOOL_LINK_MODE_10000baseT_Full_BIT is set anyway in the supported and advertising bitmap because it's part of PHY_10GBIT_FEATURES. And all users of gen10g_config_init use PHY_10GBIT_FEATURES. Signed-off-by:
-
Heiner Kallweit authored
phy_suspend() and phy_resume() are no-ops anyway if no callback is defined. Therefore we don't need these stubs. Signed-off-by:
-
Heiner Kallweit authored
Now that we have it let's use genphy_c45_aneg_done() in phy_aneg_done(). Signed-off-by:
-
Joe Perches authored
Make logging of an ethernet address more consistent with the rest of the kernel. Miscellanea: The %02hx use also did not quite match the u8 definition of addr though that did not actually matter given normal integer promotion rules. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Francesco Ruggeri authored
By default IPv6 socket with IPV6_ROUTER_ALERT socket option set will receive all IPv6 RA packets from all namespaces. IPV6_ROUTER_ALERT_ISOLATE socket option restricts packets received by the socket to be only from the socket's namespace. Signed-off-by:
Maxim Martynov <maxim@arista.com> Signed-off-by:
Francesco Ruggeri <fruggeri@arista.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Ben Dooks authored
Add __user attributes in some of the casts in this function to avoid the following sparse warnings: net/compat.c:592:57: warning: cast removes address space of expression net/compat.c:592:57: warning: incorrect type in initializer (different address spaces) net/compat.c:592:57: expected struct compat_group_req [noderef] <asn:1>*gr32 net/compat.c:592:57: got void *<noident> net/compat.c:613:65: warning: cast removes address space of expression net/compat.c:613:65: warning: incorrect type in initializer (different address spaces) net/compat.c:613:65: expected struct compat_group_source_req [noderef] <asn:1>*gsr32 net/compat.c:613:65: got void *<noident> net/compat.c:634:60: warning: cast removes address space of expression net/compat.c:634:60: warning: incorrect type in initializer (different address spaces) net/compat.c:634:60: expected struct compat_group_filter [noderef] <asn:1>*gf32 net/compat.c:634:60: got void *<noident> net/compat.c:672:52: warning: cast removes address space of expression net/compat.c:672:52: warning: incorrect type in initializer (different address spaces) net/compat.c:672:52: expected struct compat_group_filter [noderef] <asn:1>*gf32 net/compat.c:672:52: got void *<noident> Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by:
-
Florian Fainelli authored
We were skipping the prepare phase which causes some problems with at least a couple of drivers: - mv88e6xxx chooses to skip programming VID = 0 with -EOPNOTSUPP in the prepare phase, but we would still try to force this VID since we would only call the commit phase and so we would get the driver to return -EINVAL instead - qca8k does not currently have a port_vlan_add() callback implemented, yet we would try to call that unconditionally leading to a NPD Fix both issues by conforming to the current model doing a prepare/commit phase, this makes us consistent throughout the code and assumptions. Reported-by:
Michal Vokáč <michal.vokac@ysoft.com> Fixes: 061f6a50 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Ioana Ciornei says: ==================== dpaa2-eth: add XDP_REDIRECT support The first patch adds different software annotation types for Tx frames depending on frame type while the second one actually adds support for basic XDP_REDIRECT. Changes in v2: - add missing xdp_do_flush_map() call ==================== Signed-off-by: -
Ioana Radulescu authored
Implement support for the XDP_REDIRECT action. The redirected frame is transmitted and confirmed on the regular Tx/Tx conf queues. Frame is marked with the "XDP" type in the software annotation, since it requires special treatment. We don't have good hardware support for TX batching, so the XDP_XMIT_FLUSH flag doesn't make a difference for now; ndo_xdp_xmit performs the actual Tx operation on the spot. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by:
-
Ioana Radulescu authored
We write different metadata information in the software annotation area of Tx frames, depending on frame type. Make this more explicit by introducing a type field and separate structures for single buffer and scatter-gather frames. Signed-off-by:
-
David S. Miller authored
Toke Høiland-Jørgensen says: ==================== sched: Patches from out-of-tree version of sch_cake This series includes a couple of patches with updates from the out-of-tree version of sch_cake. The first one is a fix to the fairness scheduling when dual-mode fairness is enabled. The second patch is an additional feature flag that allows using fwmark as a tin selector, as a convenience for people who want to customise tin selection. The third patch is just a cleanup to the tin selection logic. ==================== Signed-off-by: -
Toke Høiland-Jørgensen authored
With more modes added the logic in cake_select_tin() was getting a bit hairy, and it turns out we can actually simplify it quite a bit. This also allows us to get rid of one of the two diffserv parsing functions, which has the added benefit that already-zeroed DSCP fields won't get re-written. Suggested-by:
Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Kevin Darbyshire-Bryant authored
Add flag 'FWMARK' to enable use of firewall connmarks as tin selector. The connmark (skbuff->mark) needs to be in the range 1->tin_cnt ie. for diffserv3 the mark needs to be 1->3. Background Typically CAKE uses DSCP as the basis for tin selection. DSCP values are relatively easily changed as part of the egress path, usually with iptables & the mangle table, ingress is more challenging. CAKE is often used on the WAN interface of a residential gateway where passthrough of DSCP from the ISP is either missing or set to unhelpful values thus use of ingress DSCP values for tin selection isn't helpful in that environment. An approach to solving the ingress tin selection problem is to use CAKE's understanding of tc filters. Naive tc filters could match on source/destination port numbers and force tin selection that way, but multiple filters don't scale particularly well as each filter must be traversed whether it matches or not. e.g. a simple example to map 3 firewall marks to tins: MAJOR=$( tc qdisc show dev $DEV | head -1 | awk '{print $3}' ) tc filter add dev $DEV parent $MAJOR protocol all handle 0x01 fw action skbedit priority ${MAJOR}1 tc filter add dev $DEV parent $MAJOR protocol all handle 0x02 fw action skbedit priority ${MAJOR}2 tc filter add dev $DEV parent $MAJOR protocol all handle 0x03 fw action skbedit priority ${MAJOR}3 Another option is to use eBPF cls_act with tc filters e.g. MAJOR=$( tc qdisc show dev $DEV | head -1 | awk '{print $3}' ) tc filter add dev $DEV parent $MAJOR bpf da obj my-bpf-fwmark-to-class.o This has the disadvantages of a) needing someone to write & maintain the bpf program, b) a bpf toolchain to compile it and c) needing to hardcode the major number in the bpf program so it matches the cake instance (or forcing the cake instance to a particular major number) since the major number cannot be passed to the bpf program via tc command line. As already hinted at by the previous examples, it would be helpful to associate tins with something that survives the Internet path and ideally allows tin selection on both egress and ingress. Netfilter's conntrack permits setting an identifying mark on a connection which can also be restored to an ingress packet with tc action connmark e.g. tc filter add dev eth0 parent ffff: protocol all prio 10 u32 \ match u32 0 0 flowid 1:1 action connmark action mirred egress redirect dev ifb1 Since tc's connmark action has restored any connmark into skb->mark, any of the previous solutions are based upon it and in one form or another copy that mark to the skb->priority field where again CAKE picks this up. This change cuts out at least one of the (less intuitive & non-scalable) middlemen and permit direct access to skb->mark. Signed-off-by: -
George Amanakis authored
CAKE host fairness does not work well with TCP flows in dual-srchost and dual-dsthost setup. The reason is that ACKs generated by TCP flows are classified as sparse flows, and affect flow isolation from other hosts. Fix this by calculating host_load based only on the bulk flows a host generates. In a hash collision the host_bulk_flow_count values must be decremented on the old hosts and incremented on the new ones *if* the queue is in the bulk set. Reported-by:
Pete Heist <peteheist@gmail.com> Signed-off-by:
George Amanakis <gamanakis@gmail.com> Signed-off-by:
-
- 03 Mar, 2019 9 commits
-
-
David S. Miller authored
Harini Katakam says: ==================== Macb power management support for ZynqMP This series adds support for macb suspend/resume with system power down. In relation to the above, this series also updates mdio_read/write function for PM and adds tsu clock management. ==================== Signed-off-by: -
Harini Katakam authored
When macb device is suspended and system is powered down, the clocks are removed and hence macb should be closed gracefully and restored upon resume. This patch does the same by switching off the net device, suspending phy and performing necessary cleanup of interrupts and BDs. Upon resume, all these are reinitialized again. Reset of macb device is done only when GEM is not a wake device. Even when gem is a wake device, tx queues can be stopped and ptp device can be closed (tsu clock will be disabled in pm_runtime_suspend) as wake event detection has no dependency on this. Signed-off-by:
Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by:
Harini Katakam <harini.katakam@xilinx.com> Signed-off-by:
-
Harini Katakam authored
Add runtime pm functions and move clock handling there. Add runtime PM calls to mdio functions to allow for active mdio bus. Signed-off-by:
Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by:
-
Harini Katakam authored
TSU clock needs to be enabled/disabled as per support in devicetree and it should also be controlled during suspend/resume (WOL has no dependency on this clock). Signed-off-by:
-
Harini Katakam authored
Replace the while loop in MDIO read/write functions with a timeout. In addition, add a check for MDIO bus busy before initiating a new operation as well to make sure there is no ongoing MDIO operation. Signed-off-by:
Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Signed-off-by:
-
David S. Miller authored
Tristram Ha says: ==================== net: dsa: microchip: add KSZ9893 switch support This series of patches is to modify the KSZ9477 DSA driver to support running KSZ9893 switch. The KSZ9893 switch is similar to KSZ9477 except the ingress tail tag has 1 byte instead of 2 bytes. The XMII register that governs the MAC communication also has different register definitions. v1 - Put KSZ9893 tagging in separate patch - Remove other switch support ==================== Signed-off-by: -
Tristram Ha authored
Add KSZ9893 switch support in KSZ9477 driver. This switch is similar to KSZ9477 except the ingress tail tag has 1 byte instead of 2 bytes, so KSZ9893 tagging will be used. The XMII register that governs how the host port communicates with the MAC also has different register definitions. Signed-off-by:
Tristram Ha <Tristram.Ha@microchip.com> Signed-off-by:
-
Tristram Ha authored
KSZ9893 switch is similar to KSZ9477 switch except the ingress tail tag has 1 byte instead of 2 bytes. The size of the portmap is smaller and so the override and lookup bits are also moved. Signed-off-by:
-
Tristram Ha authored
Document additional Microchip KSZ9477 family switches. Show how KSZ8565 switch should be configured as the host port is port 7 instead of port 5. Signed-off-by:
-
- 02 Mar, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2019-03-01 This series adds multipath offload support and contains some small updates to mlx5 driver. Multipath offload support from Roi Dayan: We are going to track SW multipath route and related nexthops and reflect that as port affinity to the HW. 1) Some patches are preparation. 2) add the multipath mode and fib events handling. 3) add support to handle offload failure for net error, i.e. port down. 4) Small updates to match the behavior of multipath Two small updates from Eran Ben Elisha, 5) Make a function static 6) Update PCIe supported devices list. ==================== Signed-off-by:
-
