- 12 Feb, 2019 8 commits
-
-
James Smart authored
[ Upstream commit b114d900 ] When LCB's are rejected, if beaconing was already in progress, the Reason Code Explanation was not being set. Should have been set to command in progress. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Lorenzo Bianconi authored
[ Upstream commit 3831a2a0 ] In order to properly support dynack in ad-hoc mode running wpa_supplicant, take into account authentication frames for 'late ack' detection. This patch has been tested on devices mounted on offshore high-voltage stations connected through ~24Km link Reported-by:
Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Steve Longerbeam authored
[ Upstream commit 819bec35 ] Prevent possible race by parallel threads between ipu_image_convert_run() and ipu_image_convert_unprepare(). This involves setting ctx->aborting to true unconditionally so that no new job runs can be queued during unprepare, and holding the ctx->aborting flag until the context is freed. Note that the "normal" ipu_image_convert_abort() case (e.g. not during context unprepare) should clear the ctx->aborting flag after aborting any active run and clearing the context's pending queue. This is because it should be possible to continue to use the conversion context and queue more runs after an abort. Signed-off-by:
Steve Longerbeam <slongerbeam@gmail.com> Tested-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 1539c7f2 ] Randconfig testing revealed a very old bug, with gcc-8: sound/soc/intel/atom/sst/sst_loader.c: In function 'sst_load_fw': sound/soc/intel/atom/sst/sst_loader.c:357:5: error: 'fw' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (fw == NULL) { ^ sound/soc/intel/atom/sst/sst_loader.c:354:25: note: 'fw' was declared here const struct firmware *fw; We must check the return code of request_firmware() before we look at the pointer result that may be uninitialized when the function fails. Fixes: 9012c954 ("ASoC: Intel: mrfld - Add DSP load and management") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Lukas Wunner authored
[ Upstream commit 3c7b30f7 ] The BCM2835 pinctrl driver acquires a spinlock in its ->irq_enable, ->irq_disable and ->irq_set_type callbacks. Spinlocks become sleeping locks with CONFIG_PREEMPT_RT_FULL=y, therefore invocation of one of the callbacks in atomic context may cause a hard lockup if at least two GPIO pins in the same bank are used as interrupts. The issue doesn't occur with just a single interrupt pin per bank because the lock is never contended. I'm experiencing such lockups with GPIO 8 and 28 used as level-triggered interrupts, i.e. with ->irq_disable being invoked on reception of every IRQ. The critical section protected by the spinlock is very small (one bitop and one RMW of an MMIO register), hence converting to a raw spinlock seems a better trade-off than converting the driver to threaded IRQ handling (which would increase latency to handle an interrupt). Cc: Mathias Duckeck <m.duckeck@kunbus.de> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Acked-by:
Julia Cartwright <julia@ni.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Deepak Sharma authored
[ Upstream commit d5c04dff ] Modify vgem_init to take platform dev as parent in drm_dev_init. This will make drm device available at "/sys/devices/platform/vgem" in x86 chromebook. v2: rebase, address checkpatch typo and line over 80 characters Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Deepak Sharma <deepak.sharma@amd.com> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Emil Velikov <emil.velikov@collabora.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181023163550.15211-1-emil.l.velikov@gmail.comSigned-off-by:
-
Slawomir Stepien authored
[ Upstream commit 0559ef7f ] Inside __ad7280_read32(), the spi_sync_transfer() can fail with negative error code. This change will ensure that this error is being passed up in the call stack, so it can be handled. Signed-off-by:
Slawomir Stepien <sst@poczta.fm> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit a3780509 ] idx can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/gpu/drm/drm_bufs.c:1420 drm_legacy_freebufs() warn: potential spectre issue 'dma->buflist' [r] (local cap) Fix this by sanitizing idx before using it to index dma->buflist Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
- 06 Feb, 2019 32 commits
-
-
Greg Kroah-Hartman authored
-
Amir Goldstein authored
commit b469e7e4 upstream. When an event is reported on a sub-directory and the parent inode has a mark mask with FS_EVENT_ON_CHILD|FS_ISDIR, the event will be sent to fsnotify() even if the event type is not in the parent mark mask (e.g. FS_OPEN). Further more, if that event happened on a mount or a filesystem with a mount/sb mark that does have that event type in their mask, the "on child" event will be reported on the mount/sb mark. That is not desired, because user will get a duplicate event for the same action. Note that the event reported on the victim inode is never merged with the event reported on the parent inode, because of the check in should_merge(): old_fsn->inode == new_fsn->inode. Fix this by looking for a match of an actual event type (i.e. not just FS_ISDIR) in parent's inode mark mask and by not reporting an "on child" event to group if event type is only found on mount/sb marks. [backport hint: The bug seems to have always been in fanotify, but this patch will only apply cleanly to v4.19.y] Cc: <stable@vger.kernel.org> # v4.19 Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> [amir: backport to v4.9] Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Benjamin Herrenschmidt authored
commit 726e4109 upstream. For devices with a class, we create a "glue" directory between the parent device and the new device with the class name. This directory is never "explicitely" removed when empty however, this is left to the implicit sysfs removal done by kobject_release() when the object loses its last reference via kobject_put(). This is problematic because as long as it's not been removed from sysfs, it is still present in the class kset and in sysfs directory structure. The presence in the class kset exposes a use after free bug fixed by the previous patch, but the presence in sysfs means that until the kobject is released, which can take a while (especially with kobject debugging), any attempt at re-creating such as binding a new device for that class/parent pair, will result in a sysfs duplicate file name error. This fixes it by instead doing an explicit kobject_del() when the glue dir is empty, by keeping track of the number of child devices of the gluedir. This is made easy by the fact that all glue dir operations are done with a global mutex, and there's already a function (cleanup_glue_dir) called in all the right places taking that mutex that can be enhanced for this. It appears that this was in fact the intent of the function, but the implementation was wrong. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Guenter Roeck <groeck@google.com> Cc: Zubin Mithra <zsm@chromium.org> Signed-off-by:
-
Paulo Alcantara authored
commit 28eb24ff upstream. In case a hostname resolves to a different IP address (e.g. long running mounts), make sure to resolve it every time prior to calling generic_ip_connect() in reconnect. Suggested-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
Paulo Alcantara <palcantara@suse.de> Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Alexei Naberezhnov authored
commit 483cbbed upstream. This fixes the case when md array assembly fails because of raid cache recovery unable to allocate a stripe, despite attempts to replay stripes and increase cache size. This happens because stripes released by r5c_recovery_replay_stripes and raid5_set_cache_size don't become available for allocation immediately. Released stripes first are placed on conf->released_stripes list and require md thread to merge them on conf->inactive_list before they can be allocated. Patch allows final allocation attempt during cache recovery to wait for new stripes to become availabe for allocation. Cc: linux-raid@vger.kernel.org Cc: Shaohua Li <shli@kernel.org> Cc: linux-stable <stable@vger.kernel.org> # 4.10+ Fixes: b4c625c6 ("md/r5cache: r5cache recovery: part 1") Signed-off-by:
Alexei Naberezhnov <anaberezhnov@fb.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
David Hildenbrand authored
commit e0a352fa upstream. We had a race in the old balloon compaction code before b1123ea6 ("mm: balloon: use general non-lru movable page feature") refactored it that became visible after backporting 195a8c43 ("virtio-balloon: deflate via a page list") without the refactoring. The bug existed from commit d6d86c0a ("mm/balloon_compaction: redesign ballooned pages management") till b1123ea6 ("mm: balloon: use general non-lru movable page feature"). d6d86c0a ("mm/balloon_compaction: redesign ballooned pages management") was backported to 3.12, so the broken kernels are stable kernels [3.12 - 4.7]. There was a subtle race between dropping the page lock of the newpage in __unmap_and_move() and checking for __is_movable_balloon_page(newpage). Just after dropping this page lock, virtio-balloon could go ahead and deflate the newpage, effectively dequeueing it and clearing PageBalloon, in turn making __is_movable_balloon_page(newpage) fail. This resulted in dropping the reference of the newpage via putback_lru_page(newpage) instead of put_page(newpage), leading to page->lru getting modified and a !LRU page ending up in the LRU lists. With 195a8c43 ("virtio-balloon: deflate via a page list") backported, one would suddenly get corrupted lists in release_pages_balloon(): - WARNING: CPU: 13 PID: 6586 at lib/list_debug.c:59 __list_del_entry+0xa1/0xd0 - list_del corruption. prev->next should be ffffe253961090a0, but was dead000000000100 Nowadays this race is no longer possible, but it is hidden behind very ugly handling of __ClearPageMovable() and __PageMovable(). __ClearPageMovable() will not make __PageMovable() fail, only PageMovable(). So the new check (__PageMovable(newpage)) will still hold even after newpage was dequeued by virtio-balloon. If anybody would ever change that special handling, the BUG would be introduced again. So instead, make it explicit and use the information of the original isolated page before migration. This patch can be backported fairly easy to stable kernels (in contrast to the refactoring). Link: http://lkml.kernel.org/r/20190129233217.10747-1-david@redhat.com Fixes: d6d86c0a ("mm/balloon_compaction: redesign ballooned pages management") Signed-off-by:
David Hildenbrand <david@redhat.com> Reported-by:
Vratislav Bendel <vbendel@redhat.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Rafael Aquini <aquini@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vratislav Bendel <vbendel@redhat.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Cc: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> [3.12 - 4.7] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Naoya Horiguchi authored
commit 6376360e upstream. Currently memory_failure() is racy against process's exiting, which results in kernel crash by null pointer dereference. The root cause is that memory_failure() uses force_sig() to forcibly kill asynchronous (meaning not in the current context) processes. As discussed in thread https://lkml.org/lkml/2010/6/8/236 years ago for OOM fixes, this is not a right thing to do. OOM solves this issue by using do_send_sig_info() as done in commit d2d39309 ("signal: oom_kill_task: use SEND_SIG_FORCED instead of force_sig()"), so this patch is suggesting to do the same for hwpoison. do_send_sig_info() properly accesses to siglock with lock_task_sighand(), so is free from the reported race. I confirmed that the reported bug reproduces with inserting some delay in kill_procs(), and it never reproduces with this patch. Note that memory_failure() can send another type of signal using force_sig_mceerr(), and the reported race shouldn't happen on it because force_sig_mceerr() is called only for synchronous processes (i.e. BUS_MCEERR_AR happens only when some process accesses to the corrupted memory.) Link: http://lkml.kernel.org/r/20190116093046.GA29835@hori1.linux.bs1.fc.nec.co.jpSigned-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reported-by:
Jane Chu <jane.chu@oracle.com> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
William Kucharski <william.kucharski@oracle.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Shakeel Butt authored
commit cefc7ef3 upstream. Syzbot instance running on upstream kernel found a use-after-free bug in oom_kill_process. On further inspection it seems like the process selected to be oom-killed has exited even before reaching read_lock(&tasklist_lock) in oom_kill_process(). More specifically the tsk->usage is 1 which is due to get_task_struct() in oom_evaluate_task() and the put_task_struct within for_each_thread() frees the tsk and for_each_thread() tries to access the tsk. The easiest fix is to do get/put across the for_each_thread() on the selected task. Now the next question is should we continue with the oom-kill as the previously selected task has exited? However before adding more complexity and heuristics, let's answer why we even look at the children of oom-kill selected task? The select_bad_process() has already selected the worst process in the system/memcg. Due to race, the selected process might not be the worst at the kill time but does that matter? The userspace can use the oom_score_adj interface to prefer children to be killed before the parent. I looked at the history but it seems like this is there before git history. Link: http://lkml.kernel.org/r/20190121215850.221745-1-shakeelb@google.com Reported-by: syzbot+7fbbfa368521945f0e3d@syzkaller.appspotmail.com Fixes: 6b0c81b3 ("mm, oom: reduce dependency on tasklist_lock") Signed-off-by:
Shakeel Butt <shakeelb@google.com> Reviewed-by:
Roman Gushchin <guro@fb.com> Acked-by:
-
Tetsuo Handa authored
commit 9bcdeb51 upstream. Arkadiusz reported that enabling memcg's group oom killing causes strange memcg statistics where there is no task in a memcg despite the number of tasks in that memcg is not 0. It turned out that there is a bug in wake_oom_reaper() which allows enqueuing same task twice which makes impossible to decrease the number of tasks in that memcg due to a refcount leak. This bug existed since the OOM reaper became invokable from task_will_free_mem(current) path in out_of_memory() in Linux 4.7, T1@P1 |T2@P1 |T3@P1 |OOM reaper ----------+----------+----------+------------ # Processing an OOM victim in a different memcg domain. try_charge() mem_cgroup_out_of_memory() mutex_lock(&oom_lock) try_charge() mem_cgroup_out_of_memory() mutex_lock(&oom_lock) try_charge() mem_cgroup_out_of_memory() mutex_lock(&oom_lock) out_of_memory() oom_kill_process(P1) do_send_sig_info(SIGKILL, @P1) mark_oom_victim(T1@P1) wake_oom_reaper(T1@P1) # T1@P1 is enqueued. mutex_unlock(&oom_lock) out_of_memory() mark_oom_victim(T2@P1) wake_oom_reaper(T2@P1) # T2@P1 is enqueued. mutex_unlock(&oom_lock) out_of_memory() mark_oom_victim(T1@P1) wake_oom_reaper(T1@P1) # T1@P1 is enqueued again due to oom_reaper_list == T2@P1 && T1@P1->oom_reaper_list == NULL. mutex_unlock(&oom_lock) # Completed processing an OOM victim in a different memcg domain. spin_lock(&oom_reaper_lock) # T1P1 is dequeued. spin_unlock(&oom_reaper_lock) but memcg's group oom killing made it easier to trigger this bug by calling wake_oom_reaper() on the same task from one out_of_memory() request. Fix this bug using an approach used by commit 855b0183 ("oom, oom_reaper: disable oom_reaper for oom_kill_allocating_task"). As a side effect of this patch, this patch also avoids enqueuing multiple threads sharing memory via task_will_free_mem(current) path. Link: http://lkml.kernel.org/r/e865a044-2c10-9858-f4ef-254bc71d6cc2@i-love.sakura.ne.jp Link: http://lkml.kernel.org/r/5ee34fc6-1485-34f8-8790-903ddabaa809@i-love.sakura.ne.jp Fixes: af8e15cc ("oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head") Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
Arkadiusz Miskiewicz <arekm@maven.pl> Tested-by:
-
Andrei Vagin authored
commit 8fb335e0 upstream. Currently, exit_ptrace() adds all ptraced tasks in a dead list, then zap_pid_ns_processes() waits on all tasks in a current pidns, and only then are tasks from the dead list released. zap_pid_ns_processes() can get stuck on waiting tasks from the dead list. In this case, we will have one unkillable process with one or more dead children. Thanks to Oleg for the advice to release tasks in find_child_reaper(). Link: http://lkml.kernel.org/r/20190110175200.12442-1-avagin@gmail.com Fixes: 7c8bd232 ("exit: ptrace: shift "reap dead" code from exit_ptrace() to forget_original_parent()") Signed-off-by:
Andrei Vagin <avagin@gmail.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Stefan Wahren authored
commit 2bd44dad upstream. We need to handle mmc_of_parse() errors during probe. This finally fixes the wifi regression on Raspberry Pi 3 series. In error case the wifi chip was permanently in reset because of the power sequence depending on the deferred probe of the GPIO expander. Fixes: b580c52d ("mmc: sdhci-iproc: add IPROC SDHCI driver") Cc: stable@vger.kernel.org Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
João Paulo Rechi Vita authored
[ Upstream commit 71b12bea ] According to Asus firmware engineers, the meaning of these codes is only to notify the OS that the screen brightness has been turned on/off by the EC. This does not match the meaning of KEY_DISPLAYTOGGLE / KEY_DISPLAY_OFF, where userspace is expected to change the display brightness. Signed-off-by:
João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
João Paulo Rechi Vita authored
[ Upstream commit b3f2f379 ] When the OS registers to handle events from the display off hotkey the EC will send a notification with 0x35 for every key press, independent of the backlight state. The behavior of this key on Windows, with the ATKACPI driver from Asus installed, is turning off the backlight of all connected displays with a fading effect, and any cursor input or key press turning the backlight back on. The key press or cursor input that wakes up the display is also passed through to the application under the cursor or under focus. The key that matches this behavior the closest is KEY_SCREENLOCK. Signed-off-by:
-
Michael J. Ruhl authored
commit 7709b0dc upstream. Applications that use the stack for execution purposes cause userspace PSM jobs to fail during mmap(). Both Fortran (non-standard format parsing) and C (callback functions located in the stack) applications can be written such that stack execution is required. The linker notes this via the gnu_stack ELF flag. This causes READ_IMPLIES_EXEC to be set which forces all PROT_READ mmaps to have PROT_EXEC for the process. Checking for VM_EXEC bit and failing the request with EPERM is overly conservative and will break any PSM application using executable stacks. Cc: <stable@vger.kernel.org> #v4.14+ Fixes: 12220267 ("IB/hfi: Protect against writable mmap") Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Kailang Yang authored
commit 693abe11 upstream. Fix hp_pin always no value. [More notes on the changes: The hp_pin value that is referred in alc294_hp_init() is always zero at the moment the function gets called, hence this is actually useless as in the current code. And, this kind of init sequence should be called from the codec init callback, instead of the parser function. So, the first fix in this patch to move the call call into its own init_hook. OTOH, this function is needed to be called only once after the boot, and it'd take too long for invoking at each resume (where the init callback gets called). So we add a new flag and invoke this only once as an additional fix. The one case is still not covered, though: S4 resume. But this change itself won't lead to any regression in that regard, so we leave S4 issue as is for now and fix it later. -- tiwai ] Fixes: bde1a745 ("ALSA: hda/realtek - Fixed headphone issue for ALC700") Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Lukas Wunner authored
commit 8c9620b1 upstream. The BCM2835 MMC host driver requests a DMA channel on probe but neglects to release the channel in the probe error path. The channel may therefore be leaked, in particular if devm_clk_get() causes probe deferral. Fix it. Fixes: 660fc733 ("mmc: bcm2835: Add new driver for the sdhost controller.") Signed-off-by:
-
Andreas Gruenbacher authored
commit e74c98ca upstream. This reverts commit 2d29f6b9. It turns out that the fix can lead to a ~20 percent performance regression in initial writes to the page cache according to iozone. Let's revert this for now to have more time for a proper fix. Cc: stable@vger.kernel.org # v3.13+ Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
-
Roger Quadros authored
commit 2486e673 upstream. When multiple instances of pcf857x chips are present, a fix up message [1] is printed during the probe of the 2nd and later instances. The issue is that the driver is using the same irq_chip data structure between multiple instances. Fix this by allocating the irq_chip data structure per instance. [1] fix up message addressed by this patch [ 1.212100] gpio gpiochip9: (pcf8575): detected irqchip that is shared with multiple gpiochips: please fix the driver. Cc: Stable <stable@vger.kernel.org> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Axel Lin authored
commit 2095a45e upstream. The altr_a10sr_gpio_direction_output should set proper output level based on the value argument. Fixes: 26a48c4c ("gpio: altera-a10sr: Add A10 System Resource Chip GPIO support.") Cc: <stable@vger.kernel.org> Signed-off-by:
Axel Lin <axel.lin@ingics.com> Tested by: Thor Thayer <thor.thayer@linux.intel.com> Reviewed by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by:
-
James Morse authored
commit f7daa9c8 upstream. During resume hibernate restores all physical memory. Any memory that is accessed with the MMU disabled needs to be cleaned to the PoC. KVMs __hyp_text was previously ommitted as it runs with the MMU enabled, but now that the hyp-stub is located in this section, we must clean __hyp_text too. This ensures secondary CPUs that come online after hibernate has finished resuming, and load KVM via the freshly written hyp-stub see the correct instructions. Signed-off-by:
James Morse <james.morse@arm.com> Cc: stable@vger.kernel.org Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
James Morse authored
commit 8fac5cbd upstream. The hyp-stub is loaded by the kernel's early startup code at EL2 during boot, before KVM takes ownership later. The hyp-stub's text is part of the regular kernel text, meaning it can be kprobed. A breakpoint in the hyp-stub causes the CPU to spin in el2_sync_invalid. Add it to the __hyp_text. Signed-off-by:
-
Ard Biesheuvel authored
commit 8ea23593 upstream. Commit 1598ecda ("arm64: kaslr: ensure randomized quantities are clean to the PoC") added cache maintenance to ensure that global variables set by the kaslr init routine are not wiped clean due to cache invalidation occurring during the second round of page table creation. However, if kaslr_early_init() exits early with no randomization being applied (either due to the lack of a seed, or because the user has disabled kaslr explicitly), no cache maintenance is performed, leading to the same issue we attempted to fix earlier, as far as the module_alloc_base variable is concerned. Note that module_alloc_base cannot be initialized statically, because that would cause it to be subject to a R_AARCH64_RELATIVE relocation, causing it to be overwritten by the second round of KASLR relocation processing. Fixes: f80fb3a3 ("arm64: add support for kernel ASLR") Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Koen Vandeputte authored
commit 65dbb423 upstream. Originally, cns3xxx used its own functions for mapping, reading and writing config registers. Commit 802b7c06 ("ARM: cns3xxx: Convert PCI to use generic config accessors") removed the internal PCI config write function in favor of the generic one: cns3xxx_pci_write_config() --> pci_generic_config_write() cns3xxx_pci_write_config() expected aligned addresses, being produced by cns3xxx_pci_map_bus() while the generic one pci_generic_config_write() actually expects the real address as both the function and hardware are capable of byte-aligned writes. This currently leads to pci_generic_config_write() writing to the wrong registers. For instance, upon ath9k module loading: - driver ath9k gets loaded - The driver wants to write value 0xA8 to register PCI_LATENCY_TIMER, located at 0x0D - cns3xxx_pci_map_bus() aligns the address to 0x0C - pci_generic_config_write() effectively writes 0xA8 into register 0x0C (CACHE_LINE_SIZE) Fix the bug by removing the alignment in the cns3xxx mapping function. Fixes: 802b7c06 ("ARM: cns3xxx: Convert PCI to use generic config accessors") Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
Krzysztof Halasa <khalasa@piap.pl> Acked-by:
Tim Harvey <tharvey@gateworks.com> Acked-by:
-
Trond Myklebust authored
commit 8fc75bed upstream. Ensure that we return the fatal error value that caused us to exit nfs_page_async_flush(). Fixes: c373fff7 ("NFSv4: Don't special case "launder"") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v4.12+ Reviewed-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Kees Cook authored
commit ed5f1326 upstream. Passing EPERM during syscall skipping was confusing since the test wasn't actually exercising the errno evaluation -- it was just passing a literal "1" (EPERM). Instead, expand the tests to check both direct value returns (positive, 45000 in this case), and errno values (negative, -ESRCH in this case) to check both fake success and fake failure during syscall skipping. Reported-by:
Colin Ian King <colin.king@canonical.com> Fixes: a33b2d03 ("selftests/seccomp: Add tests for basic ptrace actions") Cc: stable@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Shuah Khan <shuah@kernel.org> Signed-off-by:
-
Gerald Schaefer authored
commit 198bc325 upstream. Commit 9d3a4de4 ("iommu: Disambiguate MSI region types") changed the reserved region type in intel_iommu_get_resv_regions() from IOMMU_RESV_RESERVED to IOMMU_RESV_MSI, but it forgot to also change the type in intel_iommu_put_resv_regions(). This leads to a memory leak, because now the check in intel_iommu_put_resv_regions() for IOMMU_RESV_RESERVED will never be true, and no allocated regions will be freed. Fix this by changing the region type in intel_iommu_put_resv_regions() to IOMMU_RESV_MSI, matching the type of the allocated regions. Fixes: 9d3a4de4 ("iommu: Disambiguate MSI region types") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by:
Eric Auger <eric.auger@redhat.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Waiman Long authored
commit 1dbd449c upstream. The nr_dentry_unused per-cpu counter tracks dentries in both the LRU lists and the shrink lists where the DCACHE_LRU_LIST bit is set. The shrink_dcache_sb() function moves dentries from the LRU list to a shrink list and subtracts the dentry count from nr_dentry_unused. This is incorrect as the nr_dentry_unused count will also be decremented in shrink_dentry_list() via d_shrink_del(). To fix this double decrement, the decrement in the shrink_dcache_sb() function is taken out. Fixes: 4e717f5c ("list_lru: remove special case function list_lru_dispose_all." Cc: stable@kernel.org Signed-off-by:
Waiman Long <longman@redhat.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
-
Pavel Shilovsky authored
commit 8e6e72ae upstream. Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit d5256083 ] While implementing ipvlan l3 and l3s mode for kubernetes CNI plugin, I ran into the issue that while l3 mode is working fine, l3s mode does not have any connectivity to kube-apiserver and hence all pods end up in Error state as well. The ipvlan master device sits on top of a bond device and hostns traffic to kube-apiserver (also running in hostns) is DNATed from 10.152.183.1:443 to 139.178.29.207:37573 where the latter is the address of the bond0. While in l3 mode, a curl to https://10.152.183.1:443 or to https://139.178.29.207:37573 works fine from hostns, neither of them do in case of l3s. In the latter only a curl to https://127.0.0.1:37573 appeared to work where for local addresses of bond0 I saw kernel suddenly starting to emit ARP requests to query HW address of bond0 which remained unanswered and neighbor entries in INCOMPLETE state. These ARP requests only happen while in l3s. Debugging this further, I found the issue is that l3s mode is piggy- backing on l3 master device, and in this case local routes are using l3mdev_master_dev_rcu(dev) instead of net->loopback_dev as per commit f5a0aab8 ("net: ipv4: dst for local input routes should use l3mdev if relevant") and 5f02ce24 ("net: l3mdev: Allow the l3mdev to be a loopback"). I found that reverting them back into using the net->loopback_dev fixed ipvlan l3s connectivity and got everything working for the CNI. Now judging from 4fbae7d8 ("ipvlan: Introduce l3s mode") and the l3mdev paper in [0] the only sole reason why ipvlan l3s is relying on l3 master device is to get the l3mdev_ip_rcv() receive hook for setting the dst entry of the input route without adding its own ipvlan specific hacks into the receive path, however, any l3 domain semantics beyond just that are breaking l3s operation. Note that ipvlan also has the ability to dynamically switch its internal operation from l3 to l3s for all ports via ipvlan_set_port_mode() at runtime. In any case, l3 vs l3s soley distinguishes itself by 'de-confusing' netfilter through switching skb->dev to ipvlan slave device late in NF_INET_LOCAL_IN before handing the skb to L4. Minimal fix taken here is to add a IFF_L3MDEV_RX_HANDLER flag which, if set from ipvlan setup, gets us only the wanted l3mdev_l3_rcv() hook without any additional l3mdev semantics on top. This should also have minimal impact since dev->priv_flags is already hot in cache. With this set, l3s mode is working fine and I also get things like masquerading pod traffic on the ipvlan master properly working. [0] https://netdevconf.org/1.2/papers/ahern-what-is-l3mdev-paper.pdf Fixes: f5a0aab8 ("net: ipv4: dst for local input routes should use l3mdev if relevant") Fixes: 5f02ce24 ("net: l3mdev: Allow the l3mdev to be a loopback") Fixes: 4fbae7d8 ("ipvlan: Introduce l3s mode") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Mahesh Bandewar <maheshb@google.com> Cc: David Ahern <dsa@cumulusnetworks.com> Cc: Florian Westphal <fw@strlen.de> Cc: Martynas Pumputis <m@lambda.lt> Acked-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jacob Wen authored
[ Upstream commit 4522a70d ] Use pskb_may_pull() to make sure the optional fields are in skb linear parts, so we can safely read them later. It's easy to reproduce the issue with a net driver that supports paged skb data. Just create a L2TPv3 over IP tunnel and then generates some network traffic. Once reproduced, rx err in /sys/kernel/debug/l2tp/tunnels will increase. Changes in v4: 1. s/l2tp_v3_pull_opt/l2tp_v3_ensure_opt_in_linear/ 2. s/tunnel->version != L2TP_HDR_VER_2/tunnel->version == L2TP_HDR_VER_3/ 3. Add 'Fixes' in commit messages. Changes in v3: 1. To keep consistency, move the code out of l2tp_recv_common. 2. Use "net" instead of "net-next", since this is a bug fix. Changes in v2: 1. Only fix L2TPv3 to make code simple. To fix both L2TPv3 and L2TPv2, we'd better refactor l2tp_recv_common. It's complicated to do so. 2. Reloading pointers after pskb_may_pull Fixes: f7faffa3 ("l2tp: Add L2TPv3 protocol support") Fixes: 0d76751f ("l2tp: Add L2TPv3 IP encapsulation (no UDP) support") Fixes: a32e0eec ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6") Signed-off-by:
Jacob Wen <jian.w.wen@oracle.com> Acked-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
Lorenzo Bianconi authored
commit 62e7b6a5 upstream. Remove l2specific_len dependency while building l2tpv3 header or parsing the received frame since default L2-Specific Sublayer is always four bytes long and we don't need to rely on a user supplied value. Moreover in l2tp netlink code there are no sanity checks to enforce the relation between l2specific_len and l2specific_type, so sending a malformed netlink message is possible to set l2specific_type to L2TP_L2SPECTYPE_DEFAULT (or even L2TP_L2SPECTYPE_NONE) and set l2specific_len to a value greater than 4 leaking memory on the wire and sending corrupted frames. Reviewed-by:
Guillaume Nault <g.nault@alphalink.fr> Tested-by:
-
Xin Long authored
[ Upstream commit 2e6dc4d9 ] This patch is to improve sctp stream reset events in 4 places: 1. In sctp_process_strreset_outreq(), the flag should always be set with SCTP_STREAM_RESET_INCOMING_SSN instead of OUTGOING, as receiver's in stream is reset here. 2. In sctp_process_strreset_outreq(), move up SCTP_STRRESET_ERR_WRONG_SSN check, as the reset has to succeed after reconf_timer stops for the in stream reset request retransmission. 3. In sctp_process_strreset_inreq(), no event should be sent, as no in or out stream is reset here. 4. In sctp_process_strreset_resp(), SCTP_STREAM_RESET_INCOMING_SSN or OUTGOING event should always be sent for stream reset requests, no matter it fails or succeeds to process the request. Fixes: 81054476 ("sctp: implement receiver-side procedures for the Outgoing SSN Reset Request Parameter") Fixes: 16e1a919 ("sctp: implement receiver-side procedures for the Incoming SSN Reset Request Parameter") Fixes: 11ae76e6 ("sctp: implement receiver-side procedures for the Reconf Response Parameter") Reported-by:
Ying Xu <yinxu@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
