1. 11 May, 2022 4 commits
  2. 10 May, 2022 9 commits
  3. 09 May, 2022 5 commits
    • Yang Yingliang's avatar
      ethernet: tulip: fix missing pci_disable_device() on error in tulip_init_one() · 51ca86b4
      Yang Yingliang authored
      Fix the missing pci_disable_device() before return
      from tulip_init_one() in the error handling case.
      Reported-by: default avatarHulk Robot <hulkci@huawei.com>
      Signed-off-by: default avatarYang Yingliang <yangyingliang@huawei.com>
      Link: https://lore.kernel.org/r/20220506094250.3630615-1-yangyingliang@huawei.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      51ca86b4
    • Yang Yingliang's avatar
      ionic: fix missing pci_release_regions() on error in ionic_probe() · e4b1045b
      Yang Yingliang authored
      If ionic_map_bars() fails, pci_release_regions() need be called.
      
      Fixes: fbfb8031 ("ionic: Add hardware init and device commands")
      Signed-off-by: default avatarYang Yingliang <yangyingliang@huawei.com>
      Link: https://lore.kernel.org/r/20220506034040.2614129-1-yangyingliang@huawei.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      e4b1045b
    • Lina Wang's avatar
      selftests net: add UDP GRO fraglist + bpf self-tests · edae34a3
      Lina Wang authored
      When NET_F_F_GRO_FRAGLIST is enabled and bpf_skb_change_proto is used,
      check if udp packets and tcp packets are successfully delivered to user
      space. If wrong udp packets are delivered, udpgso_bench_rx will exit
      with "Initial byte out of range"
      Signed-off-by: default avatarMaciej enczykowski <maze@google.com>
      Signed-off-by: default avatarLina Wang <lina.wang@mediatek.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      edae34a3
    • Lina Wang's avatar
      net: fix wrong network header length · cf3ab8d4
      Lina Wang authored
      When clatd starts with ebpf offloaing, and NETIF_F_GRO_FRAGLIST is enable,
      several skbs are gathered in skb_shinfo(skb)->frag_list. The first skb's
      ipv6 header will be changed to ipv4 after bpf_skb_proto_6_to_4,
      network_header\transport_header\mac_header have been updated as ipv4 acts,
      but other skbs in frag_list didnot update anything, just ipv6 packets.
      
      udp_queue_rcv_skb will call skb_segment_list to traverse other skbs in
      frag_list and make sure right udp payload is delivered to user space.
      Unfortunately, other skbs in frag_list who are still ipv6 packets are
      updated like the first skb and will have wrong transport header length.
      
      e.g.before bpf_skb_proto_6_to_4,the first skb and other skbs in frag_list
      has the same network_header(24)& transport_header(64), after
      bpf_skb_proto_6_to_4, ipv6 protocol has been changed to ipv4, the first
      skb's network_header is 44,transport_header is 64, other skbs in frag_list
      didnot change.After skb_segment_list, the other skbs in frag_list has
      different network_header(24) and transport_header(44), so there will be 20
      bytes different from original,that is difference between ipv6 header and
      ipv4 header. Just change transport_header to be the same with original.
      
      Actually, there are two solutions to fix it, one is traversing all skbs
      and changing every skb header in bpf_skb_proto_6_to_4, the other is
      modifying frag_list skb's header in skb_segment_list. Considering
      efficiency, adopt the second one--- when the first skb and other skbs in
      frag_list has different network_header length, restore them to make sure
      right udp payload is delivered to user space.
      Signed-off-by: default avatarLina Wang <lina.wang@mediatek.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cf3ab8d4
    • Taehee Yoo's avatar
      net: sfc: fix memory leak due to ptp channel · 49e6123c
      Taehee Yoo authored
      It fixes memory leak in ring buffer change logic.
      
      When ring buffer size is changed(ethtool -G eth0 rx 4096), sfc driver
      works like below.
      1. stop all channels and remove ring buffers.
      2. allocates new buffer array.
      3. allocates rx buffers.
      4. start channels.
      
      While the above steps are working, it skips some steps if the channel
      doesn't have a ->copy callback function.
      Due to ptp channel doesn't have ->copy callback, these above steps are
      skipped for ptp channel.
      It eventually makes some problems.
      a. ptp channel's ring buffer size is not changed, it works only
         1024(default).
      b. memory leak.
      
      The reason for memory leak is to use the wrong ring buffer values.
      There are some values, which is related to ring buffer size.
      a. efx->rxq_entries
       - This is global value of rx queue size.
      b. rx_queue->ptr_mask
       - used for access ring buffer as circular ring.
       - roundup_pow_of_two(efx->rxq_entries) - 1
      c. rx_queue->max_fill
       - efx->rxq_entries - EFX_RXD_HEAD_ROOM
      
      These all values should be based on ring buffer size consistently.
      But ptp channel's values are not.
      a. efx->rxq_entries
       - This is global(for sfc) value, always new ring buffer size.
      b. rx_queue->ptr_mask
       - This is always 1023(default).
      c. rx_queue->max_fill
       - This is new ring buffer size - EFX_RXD_HEAD_ROOM.
      
      Let's assume we set 4096 for rx ring buffer,
      
                            normal channel     ptp channel
      efx->rxq_entries      4096               4096
      rx_queue->ptr_mask    4095               1023
      rx_queue->max_fill    4086               4086
      
      sfc driver allocates rx ring buffers based on these values.
      When it allocates ptp channel's ring buffer, 4086 ring buffers are
      allocated then, these buffers are attached to the allocated array.
      But ptp channel's ring buffer array size is still 1024(default)
      and ptr_mask is still 1023 too.
      So, 3062 ring buffers will be overwritten to the array.
      This is the reason for memory leak.
      
      Test commands:
         ethtool -G <interface name> rx 4096
         while :
         do
             ip link set <interface name> up
             ip link set <interface name> down
         done
      
      In order to avoid this problem, it adds ->copy callback to ptp channel
      type.
      So that rx_queue->ptr_mask value will be updated correctly.
      
      Fixes: 7c236c43 ("sfc: Add support for IEEE-1588 PTP")
      Signed-off-by: default avatarTaehee Yoo <ap420073@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      49e6123c
  4. 06 May, 2022 19 commits
    • Kees Cook's avatar
      net: chelsio: cxgb4: Avoid potential negative array offset · 1c7ab9cd
      Kees Cook authored
      Using min_t(int, ...) as a potential array index implies to the compiler
      that negative offsets should be allowed. This is not the case, though.
      Replace "int" with "unsigned int". Fixes the following warning exposed
      under future CONFIG_FORTIFY_SOURCE improvements:
      
      In file included from include/linux/string.h:253,
                       from include/linux/bitmap.h:11,
                       from include/linux/cpumask.h:12,
                       from include/linux/smp.h:13,
                       from include/linux/lockdep.h:14,
                       from include/linux/rcupdate.h:29,
                       from include/linux/rculist.h:11,
                       from include/linux/pid.h:5,
                       from include/linux/sched.h:14,
                       from include/linux/delay.h:23,
                       from drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:35:
      drivers/net/ethernet/chelsio/cxgb4/t4_hw.c: In function 't4_get_raw_vpd_params':
      include/linux/fortify-string.h:46:33: warning: '__builtin_memcpy' pointer overflow between offset 29 and size [2147483648, 4294967295] [-Warray-bounds]
         46 | #define __underlying_memcpy     __builtin_memcpy
            |                                 ^
      include/linux/fortify-string.h:388:9: note: in expansion of macro '__underlying_memcpy'
        388 |         __underlying_##op(p, q, __fortify_size);                        \
            |         ^~~~~~~~~~~~~
      include/linux/fortify-string.h:433:26: note: in expansion of macro '__fortify_memcpy_chk'
        433 | #define memcpy(p, q, s)  __fortify_memcpy_chk(p, q, s,                  \
            |                          ^~~~~~~~~~~~~~~~~~~~
      drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:2796:9: note: in expansion of macro 'memcpy'
       2796 |         memcpy(p->id, vpd + id, min_t(int, id_len, ID_LEN));
            |         ^~~~~~
      include/linux/fortify-string.h:46:33: warning: '__builtin_memcpy' pointer overflow between offset 0 and size [2147483648, 4294967295] [-Warray-bounds]
         46 | #define __underlying_memcpy     __builtin_memcpy
            |                                 ^
      include/linux/fortify-string.h:388:9: note: in expansion of macro '__underlying_memcpy'
        388 |         __underlying_##op(p, q, __fortify_size);                        \
            |         ^~~~~~~~~~~~~
      include/linux/fortify-string.h:433:26: note: in expansion of macro '__fortify_memcpy_chk'
        433 | #define memcpy(p, q, s)  __fortify_memcpy_chk(p, q, s,                  \
            |                          ^~~~~~~~~~~~~~~~~~~~
      drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:2798:9: note: in expansion of macro 'memcpy'
       2798 |         memcpy(p->sn, vpd + sn, min_t(int, sn_len, SERNUM_LEN));
            |         ^~~~~~
      
      Additionally remove needless cast from u8[] to char * in last strim()
      call.
      Reported-by: default avatarkernel test robot <lkp@intel.com>
      Link: https://lore.kernel.org/lkml/202205031926.FVP7epJM-lkp@intel.com
      Fixes: fc927929 ("cxgb4: Search VPD with pci_vpd_find_ro_info_keyword()")
      Fixes: 24c521f8 ("cxgb4: Use pci_vpd_find_id_string() to find VPD ID string")
      Cc: Raju Rangoju <rajur@chelsio.com>
      Cc: Eric Dumazet <edumazet@google.com>
      Cc: Paolo Abeni <pabeni@redhat.com>
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      Link: https://lore.kernel.org/r/20220505233101.1224230-1-keescook@chromium.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      1c7ab9cd
    • Eric Dumazet's avatar
      netlink: do not reset transport header in netlink_recvmsg() · d5076fe4
      Eric Dumazet authored
      netlink_recvmsg() does not need to change transport header.
      
      If transport header was needed, it should have been reset
      by the producer (netlink_dump()), not the consumer(s).
      
      The following trace probably happened when multiple threads
      were using MSG_PEEK.
      
      BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg
      
      write to 0xffff88811e9f15b2 of 2 bytes by task 32012 on cpu 1:
       skb_reset_transport_header include/linux/skbuff.h:2760 [inline]
       netlink_recvmsg+0x1de/0x790 net/netlink/af_netlink.c:1978
       sock_recvmsg_nosec net/socket.c:948 [inline]
       sock_recvmsg net/socket.c:966 [inline]
       __sys_recvfrom+0x204/0x2c0 net/socket.c:2097
       __do_sys_recvfrom net/socket.c:2115 [inline]
       __se_sys_recvfrom net/socket.c:2111 [inline]
       __x64_sys_recvfrom+0x74/0x90 net/socket.c:2111
       do_syscall_x64 arch/x86/entry/common.c:50 [inline]
       do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
       entry_SYSCALL_64_after_hwframe+0x44/0xae
      
      write to 0xffff88811e9f15b2 of 2 bytes by task 32005 on cpu 0:
       skb_reset_transport_header include/linux/skbuff.h:2760 [inline]
       netlink_recvmsg+0x1de/0x790 net/netlink/af_netlink.c:1978
       ____sys_recvmsg+0x162/0x2f0
       ___sys_recvmsg net/socket.c:2674 [inline]
       __sys_recvmsg+0x209/0x3f0 net/socket.c:2704
       __do_sys_recvmsg net/socket.c:2714 [inline]
       __se_sys_recvmsg net/socket.c:2711 [inline]
       __x64_sys_recvmsg+0x42/0x50 net/socket.c:2711
       do_syscall_x64 arch/x86/entry/common.c:50 [inline]
       do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
       entry_SYSCALL_64_after_hwframe+0x44/0xae
      
      value changed: 0xffff -> 0x0000
      
      Reported by Kernel Concurrency Sanitizer on:
      CPU: 0 PID: 32005 Comm: syz-executor.4 Not tainted 5.18.0-rc1-syzkaller-00328-ge1f700eb-dirty #0
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      
      Fixes: 1da177e4 ("Linux-2.6.12-rc2")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
      Link: https://lore.kernel.org/r/20220505161946.2867638-1-eric.dumazet@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      d5076fe4
    • Lokesh Dhoundiyal's avatar
      ipv4: drop dst in multicast routing path · 9e6c6d17
      Lokesh Dhoundiyal authored
      kmemleak reports the following when routing multicast traffic over an
      ipsec tunnel.
      
      Kmemleak output:
      unreferenced object 0x8000000044bebb00 (size 256):
        comm "softirq", pid 0, jiffies 4294985356 (age 126.810s)
        hex dump (first 32 bytes):
          00 00 00 00 00 00 00 00 80 00 00 00 05 13 74 80  ..............t.
          80 00 00 00 04 9b bf f9 00 00 00 00 00 00 00 00  ................
        backtrace:
          [<00000000f83947e0>] __kmalloc+0x1e8/0x300
          [<00000000b7ed8dca>] metadata_dst_alloc+0x24/0x58
          [<0000000081d32c20>] __ipgre_rcv+0x100/0x2b8
          [<00000000824f6cf1>] gre_rcv+0x178/0x540
          [<00000000ccd4e162>] gre_rcv+0x7c/0xd8
          [<00000000c024b148>] ip_protocol_deliver_rcu+0x124/0x350
          [<000000006a483377>] ip_local_deliver_finish+0x54/0x68
          [<00000000d9271b3a>] ip_local_deliver+0x128/0x168
          [<00000000bd4968ae>] xfrm_trans_reinject+0xb8/0xf8
          [<0000000071672a19>] tasklet_action_common.isra.16+0xc4/0x1b0
          [<0000000062e9c336>] __do_softirq+0x1fc/0x3e0
          [<00000000013d7914>] irq_exit+0xc4/0xe0
          [<00000000a4d73e90>] plat_irq_dispatch+0x7c/0x108
          [<000000000751eb8e>] handle_int+0x16c/0x178
          [<000000001668023b>] _raw_spin_unlock_irqrestore+0x1c/0x28
      
      The metadata dst is leaked when ip_route_input_mc() updates the dst for
      the skb. Commit f38a9eb1 ("dst: Metadata destinations") correctly
      handled dropping the dst in ip_route_input_slow() but missed the
      multicast case which is handled by ip_route_input_mc(). Drop the dst in
      ip_route_input_mc() avoiding the leak.
      
      Fixes: f38a9eb1 ("dst: Metadata destinations")
      Signed-off-by: default avatarLokesh Dhoundiyal <lokesh.dhoundiyal@alliedtelesis.co.nz>
      Signed-off-by: default avatarChris Packham <chris.packham@alliedtelesis.co.nz>
      Reviewed-by: default avatarDavid Ahern <dsahern@kernel.org>
      Link: https://lore.kernel.org/r/20220505020017.3111846-1-chris.packham@alliedtelesis.co.nzSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      9e6c6d17
    • Michal Michalik's avatar
      ice: fix PTP stale Tx timestamps cleanup · a11b6c1a
      Michal Michalik authored
      Read stale PTP Tx timestamps from PHY on cleanup.
      
      After running out of Tx timestamps request handlers, hardware (HW) stops
      reporting finished requests. Function ice_ptp_tx_tstamp_cleanup() used
      to only clean up stale handlers in driver and was leaving the hardware
      registers not read. Not reading stale PTP Tx timestamps prevents next
      interrupts from arriving and makes timestamping unusable.
      
      Fixes: ea9b847c ("ice: enable transmit timestamps for E810 devices")
      Signed-off-by: default avatarMichal Michalik <michal.michalik@intel.com>
      Reviewed-by: default avatarJacob Keller <jacob.e.keller@intel.com>
      Reviewed-by: default avatarPaul Menzel <pmenzel@molgen.mpg.de>
      Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
      Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      a11b6c1a
    • Anatolii Gerasymenko's avatar
      ice: clear stale Tx queue settings before configuring · 6096dae9
      Anatolii Gerasymenko authored
      The iAVF driver uses 3 virtchnl op codes to communicate with the PF
      regarding the VF Tx queues:
      
      * VIRTCHNL_OP_CONFIG_VSI_QUEUES configures the hardware and firmware
      logic for the Tx queues
      
      * VIRTCHNL_OP_ENABLE_QUEUES configures the queue interrupts
      
      * VIRTCHNL_OP_DISABLE_QUEUES disables the queue interrupts and Tx rings.
      
      There is a bug in the iAVF driver due to the race condition between VF
      reset request and shutdown being executed in parallel. This leads to a
      break in logic and VIRTCHNL_OP_DISABLE_QUEUES is not being sent.
      
      If this occurs, the PF driver never cleans up the Tx queues. This results
      in leaving behind stale Tx queue settings in the hardware and firmware.
      
      The most obvious outcome is that upon the next
      VIRTCHNL_OP_CONFIG_VSI_QUEUES, the PF will fail to program the Tx
      scheduler node due to a lack of space.
      
      We need to protect ICE driver against such situation.
      
      To fix this, make sure we clear existing stale settings out when
      handling VIRTCHNL_OP_CONFIG_VSI_QUEUES. This ensures we remove the
      previous settings.
      
      Calling ice_vf_vsi_dis_single_txq should be safe as it will do nothing if
      the queue is not configured. The function already handles the case when the
      Tx queue is not currently configured and exits with a 0 return in that
      case.
      
      Fixes: 7ad15440 ("ice: Refactor VIRTCHNL_OP_CONFIG_VSI_QUEUES handling")
      Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
      Signed-off-by: default avatarAnatolii Gerasymenko <anatolii.gerasymenko@intel.com>
      Tested-by: default avatarKonrad Jankowski <konrad0.jankowski@intel.com>
      Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      6096dae9
    • Ivan Vecera's avatar
      ice: Fix race during aux device (un)plugging · 486b9eee
      Ivan Vecera authored
      Function ice_plug_aux_dev() assigns pf->adev field too early prior
      aux device initialization and on other side ice_unplug_aux_dev()
      starts aux device deinit and at the end assigns NULL to pf->adev.
      This is wrong because pf->adev should always be non-NULL only when
      aux device is fully initialized and ready. This wrong order causes
      a crash when ice_send_event_to_aux() call occurs because that function
      depends on non-NULL value of pf->adev and does not assume that
      aux device is half-initialized or half-destroyed.
      After order correction the race window is tiny but it is still there,
      as Leon mentioned and manipulation with pf->adev needs to be protected
      by mutex.
      
      Fix (un-)plugging functions so pf->adev field is set after aux device
      init and prior aux device destroy and protect pf->adev assignment by
      new mutex. This mutex is also held during ice_send_event_to_aux()
      call to ensure that aux device is valid during that call.
      Note that device lock used ice_send_event_to_aux() needs to be kept
      to avoid race with aux drv unload.
      
      Reproducer:
      cycle=1
      while :;do
              echo "#### Cycle: $cycle"
      
              ip link set ens7f0 mtu 9000
              ip link add bond0 type bond mode 1 miimon 100
              ip link set bond0 up
              ifenslave bond0 ens7f0
              ip link set bond0 mtu 9000
              ethtool -L ens7f0 combined 1
              ip link del bond0
              ip link set ens7f0 mtu 1500
              sleep 1
      
              let cycle++
      done
      
      In short when the device is added/removed to/from bond the aux device
      is unplugged/plugged. When MTU of the device is changed an event is
      sent to aux device asynchronously. This can race with (un)plugging
      operation and because pf->adev is set too early (plug) or too late
      (unplug) the function ice_send_event_to_aux() can touch uninitialized
      or destroyed fields. In the case of crash below pf->adev->dev.mutex.
      
      Crash:
      [   53.372066] bond0: (slave ens7f0): making interface the new active one
      [   53.378622] bond0: (slave ens7f0): Enslaving as an active interface with an u
      p link
      [   53.386294] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
      [   53.549104] bond0: (slave ens7f1): Enslaving as a backup interface with an up
       link
      [   54.118906] ice 0000:ca:00.0 ens7f0: Number of in use tx queues changed inval
      idating tc mappings. Priority traffic classification disabled!
      [   54.233374] ice 0000:ca:00.1 ens7f1: Number of in use tx queues changed inval
      idating tc mappings. Priority traffic classification disabled!
      [   54.248204] bond0: (slave ens7f0): Releasing backup interface
      [   54.253955] bond0: (slave ens7f1): making interface the new active one
      [   54.274875] bond0: (slave ens7f1): Releasing backup interface
      [   54.289153] bond0 (unregistering): Released all slaves
      [   55.383179] MII link monitoring set to 100 ms
      [   55.398696] bond0: (slave ens7f0): making interface the new active one
      [   55.405241] BUG: kernel NULL pointer dereference, address: 0000000000000080
      [   55.405289] bond0: (slave ens7f0): Enslaving as an active interface with an u
      p link
      [   55.412198] #PF: supervisor write access in kernel mode
      [   55.412200] #PF: error_code(0x0002) - not-present page
      [   55.412201] PGD 25d2ad067 P4D 0
      [   55.412204] Oops: 0002 [#1] PREEMPT SMP NOPTI
      [   55.412207] CPU: 0 PID: 403 Comm: kworker/0:2 Kdump: loaded Tainted: G S
                 5.17.0-13579-g57f2d6540f03 #1
      [   55.429094] bond0: (slave ens7f1): Enslaving as a backup interface with an up
       link
      [   55.430224] Hardware name: Dell Inc. PowerEdge R750/06V45N, BIOS 1.4.4 10/07/
      2021
      [   55.430226] Workqueue: ice ice_service_task [ice]
      [   55.468169] RIP: 0010:mutex_unlock+0x10/0x20
      [   55.472439] Code: 0f b1 13 74 96 eb e0 4c 89 ee eb d8 e8 79 54 ff ff 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 65 48 8b 04 25 40 ef 01 00 31 d2 <f0> 48 0f b1 17 75 01 c3 e9 e3 fe ff ff 0f 1f 00 0f 1f 44 00 00 48
      [   55.491186] RSP: 0018:ff4454230d7d7e28 EFLAGS: 00010246
      [   55.496413] RAX: ff1a79b208b08000 RBX: ff1a79b2182e8880 RCX: 0000000000000001
      [   55.503545] RDX: 0000000000000000 RSI: ff4454230d7d7db0 RDI: 0000000000000080
      [   55.510678] RBP: ff1a79d1c7e48b68 R08: ff4454230d7d7db0 R09: 0000000000000041
      [   55.517812] R10: 00000000000000a5 R11: 00000000000006e6 R12: ff1a79d1c7e48bc0
      [   55.524945] R13: 0000000000000000 R14: ff1a79d0ffc305c0 R15: 0000000000000000
      [   55.532076] FS:  0000000000000000(0000) GS:ff1a79d0ffc00000(0000) knlGS:0000000000000000
      [   55.540163] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [   55.545908] CR2: 0000000000000080 CR3: 00000003487ae003 CR4: 0000000000771ef0
      [   55.553041] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      [   55.560173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      [   55.567305] PKRU: 55555554
      [   55.570018] Call Trace:
      [   55.572474]  <TASK>
      [   55.574579]  ice_service_task+0xaab/0xef0 [ice]
      [   55.579130]  process_one_work+0x1c5/0x390
      [   55.583141]  ? process_one_work+0x390/0x390
      [   55.587326]  worker_thread+0x30/0x360
      [   55.590994]  ? process_one_work+0x390/0x390
      [   55.595180]  kthread+0xe6/0x110
      [   55.598325]  ? kthread_complete_and_exit+0x20/0x20
      [   55.603116]  ret_from_fork+0x1f/0x30
      [   55.606698]  </TASK>
      
      Fixes: f9f5301e ("ice: Register auxiliary device to provide RDMA")
      Reviewed-by: default avatarLeon Romanovsky <leonro@nvidia.com>
      Signed-off-by: default avatarIvan Vecera <ivecera@redhat.com>
      Reviewed-by: default avatarDave Ertman <david.m.ertman@intel.com>
      Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
      Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      486b9eee
    • Jakub Kicinski's avatar
      Merge branch 'ocelot-vcap-fixes' · c88d3908
      Jakub Kicinski authored
      Vladimir Oltean says:
      
      ====================
      Ocelot VCAP fixes
      
      Changes in v2:
      fix the NPDs and UAFs caused by filter->trap_list in a more robust way
      that actually does not introduce bugs of its own (1/5)
      
      This series fixes issues found while running
      tools/testing/selftests/net/forwarding/tc_actions.sh on the ocelot
      switch:
      
      - NULL pointer dereference when failing to offload a filter
      - NULL pointer dereference after deleting a trap
      - filters still having effect after being deleted
      - dropped packets still being seen by software
      - statistics counters showing double the amount of hits
      - statistics counters showing inexistent hits
      - invalid configurations not rejected
      ====================
      
      Link: https://lore.kernel.org/r/20220504235503.4161890-1-vladimir.oltean@nxp.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      c88d3908
    • Vladimir Oltean's avatar
      net: mscc: ocelot: avoid corrupting hardware counters when moving VCAP filters · 93a84170
      Vladimir Oltean authored
      Given the following order of operations:
      
      (1) we add filter A using tc-flower
      (2) we send a packet that matches it
      (3) we read the filter's statistics to find a hit count of 1
      (4) we add a second filter B with a higher preference than A, and A
          moves one position to the right to make room in the TCAM for it
      (5) we send another packet, and this matches the second filter B
      (6) we read the filter statistics again.
      
      When this happens, the hit count of filter A is 2 and of filter B is 1,
      despite a single packet having matched each filter.
      
      Furthermore, in an alternate history, reading the filter stats a second
      time between steps (3) and (4) makes the hit count of filter A remain at
      1 after step (6), as expected.
      
      The reason why this happens has to do with the filter->stats.pkts field,
      which is written to hardware through the call path below:
      
                     vcap_entry_set
                     /      |      \
                    /       |       \
                   /        |        \
                  /         |         \
      es0_entry_set   is1_entry_set   is2_entry_set
                  \         |         /
                   \        |        /
                    \       |       /
              vcap_data_set(data.counter, ...)
      
      The primary role of filter->stats.pkts is to transport the filter hit
      counters from the last readout all the way from vcap_entry_get() ->
      ocelot_vcap_filter_stats_update() -> ocelot_cls_flower_stats().
      The reason why vcap_entry_set() writes it to hardware is so that the
      counters (saturating and having a limited bit width) are cleared
      after each user space readout.
      
      The writing of filter->stats.pkts to hardware during the TCAM entry
      movement procedure is an unintentional consequence of the code design,
      because the hit count isn't up to date at this point.
      
      So at step (4), when filter A is moved by ocelot_vcap_filter_add() to
      make room for filter B, the hardware hit count is 0 (no packet matched
      on it in the meantime), but filter->stats.pkts is 1, because the last
      readout saw the earlier packet. The movement procedure programs the old
      hit count back to hardware, so this creates the impression to user space
      that more packets have been matched than they really were.
      
      The bug can be seen when running the gact_drop_and_ok_test() from the
      tc_actions.sh selftest.
      
      Fix the issue by reading back the hit count to tmp->stats.pkts before
      migrating the VCAP filter. Sure, this is a best-effort technique, since
      the packets that hit the rule between vcap_entry_get() and
      vcap_entry_set() won't be counted, but at least it allows the counters
      to be reliably used for selftests where the traffic is under control.
      
      The vcap_entry_get() name is a bit unintuitive, but it only reads back
      the counter portion of the TCAM entry, not the entire entry.
      
      The index from which we retrieve the counter is also a bit unintuitive
      (i - 1 during add, i + 1 during del), but this is the way in which TCAM
      entry movement works. The "entry index" isn't a stored integer for a
      TCAM filter, instead it is dynamically computed by
      ocelot_vcap_block_get_filter_index() based on the entry's position in
      the &block->rules list. That position (as well as block->count) is
      automatically updated by ocelot_vcap_filter_add_to_block() on add, and
      by ocelot_vcap_block_remove_filter() on del. So "i" is the new filter
      index, and "i - 1" or "i + 1" respectively are the old addresses of that
      TCAM entry (we only support installing/deleting one filter at a time).
      
      Fixes: b5962294 ("net: mscc: ocelot: Add support for tcam")
      Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      93a84170
    • Vladimir Oltean's avatar
      net: mscc: ocelot: restrict tc-trap actions to VCAP IS2 lookup 0 · 477d2b91
      Vladimir Oltean authored
      Once the CPU port was added to the destination port mask of a packet, it
      can never be cleared, so even packets marked as dropped by the MASK_MODE
      of a VCAP IS2 filter will still reach it. This is why we need the
      OCELOT_POLICER_DISCARD to "kill dropped packets dead" and make software
      stop seeing them.
      
      We disallow policer rules from being put on any other chain than the one
      for the first lookup, but we don't do this for "drop" rules, although we
      should. This change is merely ascertaining that the rules dont't
      (completely) work and letting the user know.
      
      The blamed commit is the one that introduced the multi-chain architecture
      in ocelot. Prior to that, we should have always offloaded the filters to
      VCAP IS2 lookup 0, where they did work.
      
      Fixes: 1397a2eb ("net: mscc: ocelot: create TCAM skeleton from tc filter chains")
      Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      477d2b91
    • Vladimir Oltean's avatar
      net: mscc: ocelot: fix VCAP IS2 filters matching on both lookups · 6741e118
      Vladimir Oltean authored
      The VCAP IS2 TCAM is looked up twice per packet, and each filter can be
      configured to only match during the first, second lookup, or both, or
      none.
      
      The blamed commit wrote the code for making VCAP IS2 filters match only
      on the given lookup. But right below that code, there was another line
      that explicitly made the lookup a "don't care", and this is overwriting
      the lookup we've selected. So the code had no effect.
      
      Some of the more noticeable effects of having filters match on both
      lookups:
      
      - in "tc -s filter show dev swp0 ingress", we see each packet matching a
        VCAP IS2 filter counted twice. This throws off scripts such as
        tools/testing/selftests/net/forwarding/tc_actions.sh and makes them
        fail.
      
      - a "tc-drop" action offloaded to VCAP IS2 needs a policer as well,
        because once the CPU port becomes a member of the destination port
        mask of a packet, nothing removes it, not even a PERMIT/DENY mask mode
        with a port mask of 0. But VCAP IS2 rules with the POLICE_ENA bit in
        the action vector can only appear in the first lookup. What happens
        when a filter matches both lookups is that the action vector is
        combined, and this makes the POLICE_ENA bit ineffective, since the
        last lookup in which it has appeared is the second one. In other
        words, "tc-drop" actions do not drop packets for the CPU port, dropped
        packets are still seen by software unless there was an FDB entry that
        directed those packets to some other place different from the CPU.
      
      The last bit used to work, because in the initial commit b5962294
      ("net: mscc: ocelot: Add support for tcam"), we were writing the FIRST
      field of the VCAP IS2 half key with a 1, not with a "don't care".
      The change to "don't care" was made inadvertently by me in commit
      c1c3993e ("net: mscc: ocelot: generalize existing code for VCAP"),
      which I just realized, and which needs a separate fix from this one,
      for "stable" kernels that lack the commit blamed below.
      
      Fixes: 226e9cd8 ("net: mscc: ocelot: only install TCAM entries into a specific lookup and PAG")
      Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      6741e118
    • Vladimir Oltean's avatar
      net: mscc: ocelot: fix last VCAP IS1/IS2 filter persisting in hardware when deleted · 16bbebd3
      Vladimir Oltean authored
      ocelot_vcap_filter_del() works by moving the next filters over the
      current one, and then deleting the last filter by calling vcap_entry_set()
      with a del_filter which was specially created by memsetting its memory
      to zeroes. vcap_entry_set() then programs this to the TCAM and action
      RAM via the cache registers.
      
      The problem is that vcap_entry_set() is a dispatch function which looks
      at del_filter->block_id. But since del_filter is zeroized memory, the
      block_id is 0, or otherwise said, VCAP_ES0. So practically, what we do
      is delete the entry at the same TCAM index from VCAP ES0 instead of IS1
      or IS2.
      
      The code was not always like this. vcap_entry_set() used to simply be
      is2_entry_set(), and then, the logic used to work.
      
      Restore the functionality by populating the block_id of the del_filter
      based on the VCAP block of the filter that we're deleting. This makes
      vcap_entry_set() know what to do.
      
      Fixes: 1397a2eb ("net: mscc: ocelot: create TCAM skeleton from tc filter chains")
      Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      16bbebd3
    • Vladimir Oltean's avatar
      net: mscc: ocelot: mark traps with a bool instead of keeping them in a list · e1846cff
      Vladimir Oltean authored
      Since the blamed commit, VCAP filters can appear on more than one list.
      If their action is "trap", they are chained on ocelot->traps via
      filter->trap_list. This is in addition to their normal placement on the
      VCAP block->rules list head.
      
      Therefore, when we free a VCAP filter, we must remove it from all lists
      it is a member of, including ocelot->traps.
      
      There are at least 2 bugs which are direct consequences of this design
      decision.
      
      First is the incorrect usage of list_empty(), meant to denote whether
      "filter" is chained into ocelot->traps via filter->trap_list.
      This does not do the correct thing, because list_empty() checks whether
      "head->next == head", but in our case, head->next == head->prev == NULL.
      So we dereference NULL pointers and die when we call list_del().
      
      Second is the fact that not all places that should remove the filter
      from ocelot->traps do so. One example is ocelot_vcap_block_remove_filter(),
      which is where we have the main kfree(filter). By keeping freed filters
      in ocelot->traps we end up in a use-after-free in
      felix_update_trapping_destinations().
      
      Attempting to fix all the buggy patterns is a whack-a-mole game which
      makes the driver unmaintainable. Actually this is what the previous
      patch version attempted to do:
      https://patchwork.kernel.org/project/netdevbpf/patch/20220503115728.834457-3-vladimir.oltean@nxp.com/
      
      but it introduced another set of bugs, because there are other places in
      which create VCAP filters, not just ocelot_vcap_filter_create():
      
      - ocelot_trap_add()
      - felix_tag_8021q_vlan_add_rx()
      - felix_tag_8021q_vlan_add_tx()
      
      Relying on the convention that all those code paths must call
      INIT_LIST_HEAD(&filter->trap_list) is not going to scale.
      
      So let's do what should have been done in the first place and keep a
      bool in struct ocelot_vcap_filter which denotes whether we are looking
      at a trapping rule or not. Iterating now happens over the main VCAP IS2
      block->rules. The advantage is that we no longer risk having stale
      references to a freed filter, since it is only present in that list.
      
      Fixes: e42bd4ed ("net: mscc: ocelot: keep traps in a list")
      Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      e1846cff
    • Jonathan Toppins's avatar
      MAINTAINERS: add missing files for bonding definition · 4e707344
      Jonathan Toppins authored
      The bonding entry did not include additional include files that have
      been added nor did it reference the documentation. Add these references
      for completeness.
      Signed-off-by: default avatarJonathan Toppins <jtoppins@redhat.com>
      Link: https://lore.kernel.org/r/903ed2906b93628b38a2015664a20d2802042863.1651690748.git.jtoppins@redhat.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      4e707344
    • Tariq Toukan's avatar
      net: Fix features skip in for_each_netdev_feature() · 85db6352
      Tariq Toukan authored
      The find_next_netdev_feature() macro gets the "remaining length",
      not bit index.
      Passing "bit - 1" for the following iteration is wrong as it skips
      the adjacent bit. Pass "bit" instead.
      
      Fixes: 3b89ea9c ("net: Fix for_each_netdev_feature on Big endian")
      Signed-off-by: default avatarTariq Toukan <tariqt@nvidia.com>
      Reviewed-by: default avatarGal Pressman <gal@nvidia.com>
      Link: https://lore.kernel.org/r/20220504080914.1918-1-tariqt@nvidia.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      85db6352
    • Jakub Kicinski's avatar
      Merge branch 'vrf-fix-address-binding-with-icmp-socket' · 690447a2
      Jakub Kicinski authored
      Nicolas Dichtel says:
      
      ====================
      vrf: fix address binding with icmp socket
      
      The first patch fixes the issue.
      The second patch adds related tests in selftests.
      ====================
      
      Link: https://lore.kernel.org/r/20220504090739.21821-1-nicolas.dichtel@6wind.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      690447a2
    • Nicolas Dichtel's avatar
      selftests: add ping test with ping_group_range tuned · e71b7f1f
      Nicolas Dichtel authored
      The 'ping' utility is able to manage two kind of sockets (raw or icmp),
      depending on the sysctl ping_group_range. By default, ping_group_range is
      set to '1 0', which forces ping to use an ip raw socket.
      
      Let's replay the ping tests by allowing 'ping' to use the ip icmp socket.
      After the previous patch, ipv4 tests results are the same with both kinds
      of socket. For ipv6, there are a lot a new failures (the previous patch
      fixes only two cases).
      Signed-off-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
      Reviewed-by: default avatarDavid Ahern <dsahern@kernel.org>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      e71b7f1f
    • Nicolas Dichtel's avatar
      ping: fix address binding wrt vrf · e1a7ac6f
      Nicolas Dichtel authored
      When ping_group_range is updated, 'ping' uses the DGRAM ICMP socket,
      instead of an IP raw socket. In this case, 'ping' is unable to bind its
      socket to a local address owned by a vrflite.
      
      Before the patch:
      $ sysctl -w net.ipv4.ping_group_range='0  2147483647'
      $ ip link add blue type vrf table 10
      $ ip link add foo type dummy
      $ ip link set foo master blue
      $ ip link set foo up
      $ ip addr add 192.168.1.1/24 dev foo
      $ ip addr add 2001::1/64 dev foo
      $ ip vrf exec blue ping -c1 -I 192.168.1.1 192.168.1.2
      ping: bind: Cannot assign requested address
      $ ip vrf exec blue ping6 -c1 -I 2001::1 2001::2
      ping6: bind icmp socket: Cannot assign requested address
      
      CC: stable@vger.kernel.org
      Fixes: 1b69c6d0 ("net: Introduce L3 Master device abstraction")
      Signed-off-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
      Reviewed-by: default avatarDavid Ahern <dsahern@kernel.org>
      Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      e1a7ac6f
    • Fabio Estevam's avatar
      net: phy: micrel: Pass .probe for KS8737 · 15f03ffe
      Fabio Estevam authored
      Since commit f1131b9c ("net: phy: micrel: use
      kszphy_suspend()/kszphy_resume for irq aware devices") the kszphy_suspend/
      resume hooks are used.
      
      These functions require the probe function to be called so that
      priv can be allocated.
      
      Otherwise, a NULL pointer dereference happens inside
      kszphy_config_reset().
      
      Cc: stable@vger.kernel.org
      Fixes: f1131b9c ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices")
      Reported-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarFabio Estevam <festevam@denx.de>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Link: https://lore.kernel.org/r/20220504143104.1286960-2-festevam@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      15f03ffe
    • Fabio Estevam's avatar
      net: phy: micrel: Do not use kszphy_suspend/resume for KSZ8061 · e333eed6
      Fabio Estevam authored
      Since commit f1131b9c ("net: phy: micrel: use
      kszphy_suspend()/kszphy_resume for irq aware devices") the following
      NULL pointer dereference is observed on a board with KSZ8061:
      
       # udhcpc -i eth0
      udhcpc: started, v1.35.0
      8<--- cut here ---
      Unable to handle kernel NULL pointer dereference at virtual address 00000008
      pgd = f73cef4e
      [00000008] *pgd=00000000
      Internal error: Oops: 5 [#1] SMP ARM
      Modules linked in:
      CPU: 0 PID: 196 Comm: ifconfig Not tainted 5.15.37-dirty #94
      Hardware name: Freescale i.MX6 SoloX (Device Tree)
      PC is at kszphy_config_reset+0x10/0x114
      LR is at kszphy_resume+0x24/0x64
      ...
      
      The KSZ8061 phy_driver structure does not have the .probe/..driver_data
      fields, which means that priv is not allocated.
      
      This causes the NULL pointer dereference inside kszphy_config_reset().
      
      Fix the problem by using the generic suspend/resume functions as before.
      
      Another alternative would be to provide the .probe and .driver_data
      information into the structure, but to be on the safe side, let's
      just restore Ethernet functionality by using the generic suspend/resume.
      
      Cc: stable@vger.kernel.org
      Fixes: f1131b9c ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices")
      Signed-off-by: default avatarFabio Estevam <festevam@denx.de>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Link: https://lore.kernel.org/r/20220504143104.1286960-1-festevam@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      e333eed6
  5. 05 May, 2022 3 commits
    • Tetsuo Handa's avatar
      net: rds: use maybe_get_net() when acquiring refcount on TCP sockets · 6997fbd7
      Tetsuo Handa authored
      Eric Dumazet is reporting addition on 0 problem at rds_tcp_tune(), for
      delayed works queued in rds_wq might be invoked after a net namespace's
      refcount already reached 0.
      
      Since rds_tcp_exit_net() from cleanup_net() calls flush_workqueue(rds_wq),
      it is guaranteed that we can instead use maybe_get_net() from delayed work
      functions until rds_tcp_exit_net() returns.
      
      Note that I'm not convinced that all works which might access a net
      namespace are already queued in rds_wq by the moment rds_tcp_exit_net()
      calls flush_workqueue(rds_wq). If some race is there, rds_tcp_exit_net()
      will fail to wait for work functions, and kmem_cache_free() could be
      called from net_free() before maybe_get_net() is called from
      rds_tcp_tune().
      Reported-by: default avatarEric Dumazet <edumazet@google.com>
      Fixes: 3a58f13a ("net: rds: acquire refcount on TCP sockets")
      Signed-off-by: default avatarTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
      Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
      Link: https://lore.kernel.org/r/41d09faf-bc78-1a87-dfd1-c6d1b5984b61@I-love.SAKURA.ne.jpSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      6997fbd7
    • Linus Torvalds's avatar
      Merge tag 'net-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 68533eb1
      Linus Torvalds authored
      Pull networking fixes from Paolo Abeni:
       "Including fixes from can, rxrpc and wireguard.
      
        Previous releases - regressions:
      
         - igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter()
      
         - mld: respect RCU rules in ip6_mc_source() and ip6_mc_msfilter()
      
         - rds: acquire netns refcount on TCP sockets
      
         - rxrpc: enable IPv6 checksums on transport socket
      
         - nic: hinic: fix bug of wq out of bound access
      
         - nic: thunder: don't use pci_irq_vector() in atomic context
      
         - nic: bnxt_en: fix possible bnxt_open() failure caused by wrong RFS
           flag
      
         - nic: mlx5e:
            - lag, fix use-after-free in fib event handler
            - fix deadlock in sync reset flow
      
        Previous releases - always broken:
      
         - tcp: fix insufficient TCP source port randomness
      
         - can: grcan: grcan_close(): fix deadlock
      
         - nfc: reorder destructive operations in to avoid bugs
      
        Misc:
      
         - wireguard: improve selftests reliability"
      
      * tag 'net-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
        NFC: netlink: fix sleep in atomic bug when firmware download timeout
        selftests: ocelot: tc_flower_chains: specify conform-exceed action for policer
        tcp: drop the hash_32() part from the index calculation
        tcp: increase source port perturb table to 2^16
        tcp: dynamically allocate the perturb table used by source ports
        tcp: add small random increments to the source port
        tcp: resalt the secret every 10 seconds
        tcp: use different parts of the port_offset for index and offset
        secure_seq: use the 64 bits of the siphash for port offset calculation
        wireguard: selftests: set panic_on_warn=1 from cmdline
        wireguard: selftests: bump package deps
        wireguard: selftests: restore support for ccache
        wireguard: selftests: use newer toolchains to fill out architectures
        wireguard: selftests: limit parallelism to $(nproc) tests at once
        wireguard: selftests: make routing loop test non-fatal
        net/mlx5: Fix matching on inner TTC
        net/mlx5: Avoid double clear or set of sync reset requested
        net/mlx5: Fix deadlock in sync reset flow
        net/mlx5e: Fix trust state reset in reload
        net/mlx5e: Avoid checking offload capability in post_parse action
        ...
      68533eb1
    • Duoming Zhou's avatar
      NFC: netlink: fix sleep in atomic bug when firmware download timeout · 4071bf12
      Duoming Zhou authored
      There are sleep in atomic bug that could cause kernel panic during
      firmware download process. The root cause is that nlmsg_new with
      GFP_KERNEL parameter is called in fw_dnld_timeout which is a timer
      handler. The call trace is shown below:
      
      BUG: sleeping function called from invalid context at include/linux/sched/mm.h:265
      Call Trace:
      kmem_cache_alloc_node
      __alloc_skb
      nfc_genl_fw_download_done
      call_timer_fn
      __run_timers.part.0
      run_timer_softirq
      __do_softirq
      ...
      
      The nlmsg_new with GFP_KERNEL parameter may sleep during memory
      allocation process, and the timer handler is run as the result of
      a "software interrupt" that should not call any other function
      that could sleep.
      
      This patch changes allocation mode of netlink message from GFP_KERNEL
      to GFP_ATOMIC in order to prevent sleep in atomic bug. The GFP_ATOMIC
      flag makes memory allocation operation could be used in atomic context.
      
      Fixes: 9674da87 ("NFC: Add firmware upload netlink command")
      Fixes: 9ea7187c ("NFC: netlink: Rename CMD_FW_UPLOAD to CMD_FW_DOWNLOAD")
      Signed-off-by: default avatarDuoming Zhou <duoming@zju.edu.cn>
      Reviewed-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
      Link: https://lore.kernel.org/r/20220504055847.38026-1-duoming@zju.edu.cnSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      4071bf12