- 31 Jan, 2008 40 commits
-
-
Nicolas Kaiser authored
Remove line duplications in defines. Acked-by:
Thomas Sailer <sailer@ife.ee.ethz.ch> Signed-off-by:
Nicolas Kaiser <nikai@nikai.net> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jaroslav Kysela <perex@perex.cz>
-
Matthew Ranostay authored
Added more laptops subsystem id's that have STAC9228 DMIC support. Signed-off-by:
Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by:
-
Timofei Bondarenko authored
Enable capturing of raw 32bit IEC958_SUBFRAME. The 24-bits PCM data can be obtained using iec958 plugin. Known problem: captured stream may begin with either left or right subframe. Since the iec958 plugin doesn't decode preamble it may swap the channels sometime. Signed-off-by:
Timofei Bondarenko <tim@ipi.ac.ru> Signed-off-by:
-
Timofei Bondarenko authored
Setting the ADC48K44K greatly improves capture quality at 48k sampling rate. With this bit clear ADC does ZOH interpolation of every 22th sample at 48k. At frequencies higher than 48k there ADC performs a little better with ADC48K44K bit set. At 44.1k ADC performs a little better with this bit clear. At frequencies below 44.1k there is no difference. Signed-off-by:
-
Takashi Iwai authored
Added new PCI SSIDs for HP machines with ALC262 codec. Signed-off-by:
-
Matthew Ranostay authored
Added analog loopback support and missing ADC capture mixer for the STAC92HD71 codec family. Signed-off-by:
-
Manuel Lauss authored
Change loops in ac97_read/write functions to count down to zero rather than up. Gcc will then use the 'dt' (decrement-and-test) op instead of an increment/compare op-pair. Signed-off-by:
Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by:
-
Matthew Ranostay authored
Added initial support for the STAC92HD71BXX family of codecs. Signed-off-by:
-
Herton Ronaldo Krzesinski authored
The Audio interface on HD2400/HD2600 cards isn't currently detected by snd-hda-intel. I added missing pci device ids for RV610 and RV630, but I only had a HD2400 pro card to test, where now the audio interface is detected (and no need to change patch_atihdmi.c, as the codec vendor id remains 0x1002aa01 for which we already have an entry there). I also couldn't test if sound pass-trough is ok (and I don't know how to), but at least now the device is detected. Signed-off-by:
Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by:
-
Joachim Foerster authored
We have to do fairly accurate counting of the minimal periods, instead of being lazy and just setting the number to zero as soon as one period elapses. Signed-off-by:
Joachim Foerster <JOFT@gmx.de> Signed-off-by:
-
Joachim Foerster authored
Add ALSA support for the opb_ac97_controller_ref_v1_00_a ip core found in Xilinx' ML403 reference design. Known issue: Currently this driver hits a WARN_ON_ONCE(1) statement in kernel/irq/resend.c (line 70). According to Linus (http://lkml.org/lkml/2007/8/5/5) this may be ignored, right? I haven't had a look into this 'problem' yet. Signed-off-by:
-
Matthew Ranostay authored
Added support for the dmics and enabled EAPD for several laptops with STAC9228 cards. Signed-off-by:
Matthew Ranostay <mranostay@gmail.com> Signed-off-by:
-
Tobin Davis authored
Simple patch to add the Asus VX1 laptop to the Analog Devices pci quirk list. Signed-off-by:
Tobin Davis <tdavis@dsl-only.net> Signed-off-by:
-
Timofei Bondarenko authored
This patch adds support for 88.2k, 96k, and 128k samplerates on cmi8738-55 chip. Analog playback works fine on all channels. Analog capture works well too, though the extra samples seems interpolated by hardware. spdif playback and capture works fine. Signed-off-by:
-
Takashi Iwai authored
Some small improvements on autocfg stuff: - sort HP pins by sequence number, too - move sole mic pin to AUTO_PIN_MIC instead of AUTO_PIN_FRONT_MIC - ditto for line-in pin Signed-off-by:
-
Timofei Bondarenko authored
This patch improves support for 'SB Live 24-bit Extarnal' USB card. 1) This card can go into muted state when a headphones connected or disconnected. So notify mixer about changes in headphone jack. 2) Add LED controls and procfs support just as in similar Audigy 2 NX card. 3) Rename 'PCM Capture' conrol to 'Mic Capture' to reflect reality: the card may adjust microphone input level only. Signed-off-by:
-
Takashi Iwai authored
I applied a wrong patch for 'opl3 - simplify exclusive access lock'. Fixed now. Signed-off-by:
-
Takashi Iwai authored
Remove sequencer instrument layer from the tree. This mechanism hasn't been used much with the actual devices. The only reasonable user was OPL3 loader, and now it was rewritten to use hwdep instead. So, let's remove the rest of rotten codes. Signed-off-by:
-
Takashi Iwai authored
Use the exclusive access lock in hwdep instead of the own one. Signed-off-by:
-
Takashi Iwai authored
Use the hwdep device for loading OPL2/3 patch data instead of the messy sequencer instrument layer. Due to this change, the sbiload program should be updated, too. Signed-off-by:
-
Takashi Iwai authored
This patch supresses an annoying compiler warning that the variable err may be used uninitialised. Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by:
-
Krzysztof Helt authored
This patch kills these two compilation warnings if power management is disabled: sound/pci/ac97/ac97_patch.h:86: warning: 'snd_ac97_restore_status' declared 'static' but never defined sound/pci/ac97/ac97_patch.h:87: warning: 'snd_ac97_restore_iec958' declared 'static' but never defined Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Takashi Iwai authored
Introduced the global 'slots' option to snd module. This option provides an alternative way to handle the order of multiple sound card instances. It's an easier approach to avoid conflict with hotplug devices, and can be used together with the existing 'order' option of each card driver. Signed-off-by:
-
Takashi Iwai authored
Show the current EAPD status and volume-knob status in proc file. Signed-off-by:
-
Ivan Kuten authored
This patch adds ac97 support for ln2440sbc board from LittleChips. This board is based on s3c2440 SoC + AC97 Realtek ALC650 codec. Existing s3c2443 implementation is slightly modified because s3c2440 and s3c2443 have different AC97 interrupts. Signed-off-by:
Ivan Kuten <ivan.kuten@promwad.com> Signed-off-by:
-
Tobin Davis authored
This patch adds full record and playback support for the Samsung Q1 Ultra - Vista model (different codec than the earlier Q1 Ultra models). Signed-off-by:
-
Takashi Iwai authored
Fix quirk for Shuttle AK32VN. It works better with DXS_SRC, and needs HP_ONLY ac97 quirk. Signed-off-by:
-
Takashi Iwai authored
Fixed the print format for debug message. Spotted by Matthew Wilcox. Signed-off-by:
-
Michael Opdenacker authored
This patch brings some English style improvements throughout the document, as well as 1 or 2 extra technical details. Signed-off-by:
Michael Opdenacker <michael@free-electrons.com> Signed-off-by:
-
Shin-ya Okada authored
Added the support for Onkyo SE-90PCI and SE-200PCI boards. Signed-off-by: Shin-ya Okada <sh_okada at d4.dion.ne.jp> Signed-off-by:
-
Mike Rapoport authored
The following patch adds 'Mono Playback Switch' control to WM9712 codec SoC driver. Also, it fixes Treble, Bass and Mono playback volume inversion bits. Signed-off-by:
Mike Rapoport <mike@compulab.co.il> Signed-off-by:
-
Takashi Iwai authored
Added model=laptop for Fujitsu V5505 with Cxt5405 codec. Signed-off-by:
-
Matthew Ranostay authored
Changed the dmux for STAC9228 from ADC1MUX to ADC0MUX to avoid confusion. Signed-off-by:
-
Matthew Ranostay authored
Added a dmux to the STAC9228 cards with DMIC support. And added a STAC_DIGITAL_INPUT_SOURCE macro for repeating mixer code. Signed-off-by:
-
Matthew Ranostay authored
Added the missing STAC9228 DMIC support. Also added a new vendor id tag for IDT. Signed-off-by:
-
Takashi Iwai authored
Added the missing model string 'eeepc-p701' for ALC662 codec. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (454 commits) [POWERPC] Cell IOMMU fixed mapping support [POWERPC] Split out the ioid fetching/checking logic [POWERPC] Add support to cell_iommu_setup_page_tables() for multiple windows [POWERPC] Split out the IOMMU logic from cell_dma_dev_setup() [POWERPC] Split cell_iommu_setup_hardware() into two parts [POWERPC] Split out the logic that allocates struct iommus [POWERPC] Allocate the hash table under 1G on cell [POWERPC] Add set_dma_ops() to match get_dma_ops() [POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format. [POWERPC] 85xx: Only invalidate TLB0 and TLB1 [POWERPC] 83xx: Fix typo in mpc837x compatible entries [POWERPC] 85xx: convert sbc85* boards to use machine_device_initcall [POWERPC] 83xx: rework platform Kconfig [POWERPC] 85xx: rework platform Kconfig [POWERPC] 86xx: Remove unused IRQ defines [POWERPC] QE: Explicitly set address-cells and size cells for muram [POWERPC] Convert StorCenter DTS file to /dts-v1/ format. [POWERPC] 86xx: Convert all 86xx DTS files to /dts-v1/ format. [PPC] Remove 85xx from arch/ppc [PPC] Remove 83xx from arch/ppc ...
-
Michael Ellerman authored
This patch adds support for setting up a fixed IOMMU mapping on certain cell machines. For 64-bit devices this avoids the performance overhead of mapping and unmapping pages at runtime. 32-bit devices are unable to use the fixed mapping. The fixed mapping is established at boot, and maps all of physical memory 1:1 into device space at some offset. On machines with < 30 GB of memory we setup the fixed mapping immediately above the normal IOMMU window. For example a machine with 4GB of memory would end up with the normal IOMMU window from 0-2GB and the fixed mapping window from 2GB to 6GB. In this case a 64-bit device wishing to DMA to 1GB would be told to DMA to 3GB, plus any offset required by firmware. The firmware offset is encoded in the "dma-ranges" property. On machines with 30GB or more of memory, we are unable to place the fixed mapping above the normal IOMMU window as we would run out of address space. Instead we move the normal IOMMU window to coincide with the hash page table, this region does not need to be part of the fixed mapping as no device should ever be DMA'ing to it. We then setup the fixed mapping from 0 to 32GB. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Michael Ellerman authored
Split out the ioid fetching and checking logic so we can use it elsewhere in a subsequent patch. Signed-off-by:
-
Michael Ellerman authored
Add support to cell_iommu_setup_page_tables() for handling two windows, the dynamic window and the fixed window. A fixed window size of 0 indicates that there is no fixed window at all. Currently there are no callers who pass a non-zero fixed window, but the upcoming fixed IOMMU mapping patch will change that. Signed-off-by:
-
