- 14 Jun, 2017 19 commits
-
-
Niklas Cassel authored
[ Upstream commit 426849e6 ] stmmac_tso_allocator can fail to set the Last Descriptor bit on a descriptor that actually was the last descriptor. This happens when the buffer of the last descriptor ends up having a size of exactly TSO_MAX_BUFF_SIZE. When the IP eventually reaches the next last descriptor, which actually has the bit set, the DMA will hang. When the DMA hangs, we get a tx timeout, however, since stmmac does not do a complete reset of the IP in stmmac_tx_timeout, we end up in a state with completely hung TX. Signed-off-by:
Niklas Cassel <niklas.cassel@axis.com> Acked-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Max Filippov authored
[ Upstream commit d220b942 ] ethoc_reset enables device interrupts, ethoc_interrupt may schedule a NAPI poll before NAPI is enabled in the ethoc_open, which results in device being unable to send or receive anything until it's closed and reopened. In case the device is flooded with ingress packets it may be unable to recover at all. Move napi_enable above ethoc_reset in the ethoc_open to fix that. Fixes: a1702857 ("net: Add support for the OpenCores 10/100 Mbps Ethernet MAC.") Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Reviewed-by:
Tobias Klauser <tklauser@distanz.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nikolay Aleksandrov authored
[ Upstream commit 1020ce31 ] We might call br_afspec() with p == NULL which is a valid use case if the action is on the bridge device itself, but the bridge tunnel code dereferences the p pointer without checking, so check if p is null first. Reported-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Fixes: efa5356b ("bridge: per vlan dst_metadata netlink support") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eugeniu Rosca authored
[ Upstream commit 79514ef6 ] Commit a47b70ea ("ravb: unmap descriptors when freeing rings") has introduced the issue seen in [1] reproduced on H3ULCB board. Fix this by relocating the RX skb ringbuffer free operation, so that swiotlb page unmapping can be done first. Freeing of aligned TX buffers is not relevant to the issue seen in [1]. Still, reposition TX free calls as well, to have all kfree() operations performed consistently _after_ dma_unmap_*()/dma_free_*(). [1] Console screenshot with the problem reproduced: salvator-x login: root root@salvator-x:~# ifconfig eth0 up Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: \ attached PHY driver [Micrel KSZ9031 Gigabit PHY] \ (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=235) IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready root@salvator-x:~# root@salvator-x:~# ifconfig eth0 down ================================================================== BUG: KASAN: use-after-free in swiotlb_tbl_unmap_single+0xc4/0x35c Write of size 1538 at addr ffff8006d884f780 by task ifconfig/1649 CPU: 0 PID: 1649 Comm: ifconfig Not tainted 4.12.0-rc4-00004-g112eb072 #32 Hardware name: Renesas H3ULCB board based on r8a7795 (DT) Call trace: [<ffff20000808f11c>] dump_backtrace+0x0/0x3a4 [<ffff20000808f4d4>] show_stack+0x14/0x1c [<ffff20000865970c>] dump_stack+0xf8/0x150 [<ffff20000831f8b0>] print_address_description+0x7c/0x330 [<ffff200008320010>] kasan_report+0x2e0/0x2f4 [<ffff20000831eac0>] check_memory_region+0x20/0x14c [<ffff20000831f054>] memcpy+0x48/0x68 [<ffff20000869ed50>] swiotlb_tbl_unmap_single+0xc4/0x35c [<ffff20000869fcf4>] unmap_single+0x90/0xa4 [<ffff20000869fd14>] swiotlb_unmap_page+0xc/0x14 [<ffff2000080a2974>] __swiotlb_unmap_page+0xcc/0xe4 [<ffff2000088acdb8>] ravb_ring_free+0x514/0x870 [<ffff2000088b25dc>] ravb_close+0x288/0x36c [<ffff200008aaf8c4>] __dev_close_many+0x14c/0x174 [<ffff200008aaf9b4>] __dev_close+0xc8/0x144 [<ffff200008ac2100>] __dev_change_flags+0xd8/0x194 [<ffff200008ac221c>] dev_change_flags+0x60/0xb0 [<ffff200008ba2dec>] devinet_ioctl+0x484/0x9d4 [<ffff200008ba7b78>] inet_ioctl+0x190/0x194 [<ffff200008a78c44>] sock_do_ioctl+0x78/0xa8 [<ffff200008a7a128>] sock_ioctl+0x110/0x3c4 [<ffff200008365a70>] vfs_ioctl+0x90/0xa0 [<ffff200008365dbc>] do_vfs_ioctl+0x148/0xc38 [<ffff2000083668f0>] SyS_ioctl+0x44/0x74 [<ffff200008083770>] el0_svc_naked+0x24/0x28 The buggy address belongs to the page: page:ffff7e001b6213c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x4000000000000000() raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff raw: 0000000000000000 ffff7e001b6213e0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8006d884f680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8006d884f700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff8006d884f780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff8006d884f800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8006d884f880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint root@salvator-x:~# Fixes: a47b70ea ("ravb: unmap descriptors when freeing rings") Signed-off-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Richard Haines authored
[ Upstream commit e3ebdb20 ] When using CALIPSO with IPPROTO_UDP it is possible to trigger a GPF as the IP header may have moved. Also update the payload length after adding the CALIPSO option. Signed-off-by:
Richard Haines <richard_c_haines@btinternet.com> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
Huw Davies <huw@codeweavers.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit 77d4b1d3 ] Alexander reported various KASAN messages triggered in recent kernels The problem is that ping sockets should not use udp_poll() in the first place, and recent changes in UDP stack finally exposed this old bug. Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Fixes: 6d0bfe22 ("net: ipv6: Add IPv6 support to the ping socket.") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Sasha Levin <alexander.levin@verizon.com> Cc: Solar Designer <solar@openwall.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Lorenzo Colitti <lorenzo@google.com> Acked-By:
Lorenzo Colitti <lorenzo@google.com> Tested-By:
Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Florian Fainelli authored
[ Upstream commit b07ac989 ] Commit 9520ed8f ("net: dsa: use cpu_switch instead of ds[0]") replaced the use of dst->ds[0] with dst->cpu_switch since that is functionally equivalent, however, we can now run into an use after free scenario after unbinding then rebinding the switch driver. The use after free happens because we do correctly initialize dst->cpu_switch the first time we probe in dsa_cpu_parse(), then we unbind the driver: dsa_dst_unapply() is called, and we rebind again. dst->cpu_switch now points to a freed "ds" structure, and so when we finally dereference it in dsa_cpu_port_ethtool_setup(), we oops. To fix this, simply set dst->cpu_switch to NULL in dsa_dst_unapply() which guarantees that we always correctly re-assign dst->cpu_switch in dsa_cpu_parse(). Fixes: 9520ed8f ("net: dsa: use cpu_switch instead of ds[0]") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David S. Miller authored
[ Upstream commit e3e86b51 ] If ip6_find_1stfragopt() fails and we return an error we have to free up 'segs' because nobody else is going to. Fixes: 2423496a ("ipv6: Prevent overrun when parsing v6 header options") Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Garver authored
[ Upstream commit 9a1c44d9 ] Since commit 9b4437a5 ("geneve: Unify LWT and netdev handling.") when using COLLECT_METADATA geneve devices are created with too small of a needed_headroom and too large of a max_mtu. This is because ip_tunnel_info_af() is not valid with the device level info when using COLLECT_METADATA and we mistakenly fall into the IPv4 case. For COLLECT_METADATA, always use the worst case of ipv6 since both sockets are created. Fixes: 9b4437a5 ("geneve: Unify LWT and netdev handling.") Signed-off-by:
Eric Garver <e@erig.me> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Soheil Hassas Yeganeh authored
[ Upstream commit 38b25793 ] Prior to f5f99309 (sock: do not set sk_err in sock_dequeue_err_skb), sk_err was reset to the error of the skb on the head of the error queue. Applications, most notably ping, are relying on this behavior to reset sk_err for ICMP packets. Set sk_err to the ICMP error when there is an ICMP packet at the head of the error queue. Fixes: f5f99309 (sock: do not set sk_err in sock_dequeue_err_skb) Reported-by:
Cyril Hrubis <chrubis@suse.cz> Tested-by:
Cyril Hrubis <chrubis@suse.cz> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Liam McBirnie authored
[ Upstream commit 5f733ee6 ] ip6_route_output() requires that the flowlabel contains the traffic class for policy routing. Commit 0e9a7095 ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets") removed the code which previously added the traffic class to the flowlabel. The traffic class is added here because only route lookup needs the flowlabel to contain the traffic class. Fixes: 0e9a7095 ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets") Signed-off-by:
Liam McBirnie <liam.mcbirnie@boeing.com> Acked-by:
Peter Dawson <peter.a.dawson@boeing.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark Bloch authored
[ Upstream commit a53cb29b ] Adding a vxlan interface to a socket isn't symmetrical, while adding is done in vxlan_open() the deletion is done in vxlan_dellink(). This can cause a use-after-free error when we close the vxlan interface before deleting it. We add vxlan_vs_del_dev() to match vxlan_vs_add_dev() and call it from vxlan_stop() to match the call from vxlan_open(). Fixes: 56ef9c90 ("vxlan: Move socket initialization to within rtnl scope") Acked-by:
Jiri Benc <jbenc@redhat.com> Tested-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Mark Bloch <markb@mellanox.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yuchung Cheng authored
[ Upstream commit 44abafc4 ] When the sender switches its congestion control during loss recovery, if the recovery is spurious then it may incorrectly revert cwnd and ssthresh to the older values set by a previous congestion control. Consider a congestion control (like BBR) that does not use ssthresh and keeps it infinite: the connection may incorrectly revert cwnd to an infinite value when switching from BBR to another congestion control. This patch fixes it by disallowing such cwnd undo operation upon switching congestion control. Note that undo_marker is not reset s.t. the packets that were incorrectly marked lost would be corrected. We only avoid undoing the cwnd in tcp_undo_cwnd_reduction(). Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ganesh Goudar authored
[ Upstream commit e7519f99 ] Take uld mutex to avoid race between cxgb_up() and cxgb4_register_uld() to enable napi for the same uld queue. Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ben Hutchings authored
[ Upstream commit 6e80ac5c ] xfrm6_find_1stfragopt() may now return an error code and we must not treat it as a length. Fixes: 2423496a ("ipv6: Prevent overrun when parsing v6 header options") Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Acked-by:
Craig Gallek <kraig@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Florian Fainelli authored
[ Upstream commit d31353cd ] On SYSTEMPORT Lite, since we have the main interrupt source in the first cell, the second cell is the Wake-on-LAN interrupt, yet the code was not properly updated to fetch the second cell, and instead looked at the third and non-existing cell for Wake-on-LAN. Fixes: 44a4524c ("net: systemport: Add support for SYSTEMPORT Lite") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lance Richardson authored
[ Upstream commit 35cf2845 ] After commit 0c1d70af ("net: use dst_cache for vxlan device"), cached dst entries could be leaked when more than one remote was present for a given vxlan_fdb entry, causing subsequent netns operations to block indefinitely and "unregister_netdevice: waiting for lo to become free." messages to appear in the kernel log. Fix by properly releasing cached dst and freeing resources in this case. Fixes: 0c1d70af ("net: use dst_cache for vxlan device") Signed-off-by:
Lance Richardson <lrichard@redhat.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nikolay Aleksandrov authored
[ Upstream commit aeb07324 ] When the transition of NO_STP -> KERNEL_STP was fixed by always calling mod_timer in br_stp_start, it introduced a new regression which causes the timer to be armed even when the bridge is down, and since we stop the timers in its ndo_stop() function, they never get disabled if the device is destroyed before it's upped. To reproduce: $ while :; do ip l add br0 type bridge hello_time 100; brctl stp br0 on; ip l del br0; done; CC: Xin Long <lucien.xin@gmail.com> CC: Ivan Vecera <cera@cera.cz> CC: Sebastian Ott <sebott@linux.vnet.ibm.com> Reported-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Fixes: 6d18c732 ("bridge: start hello_timer when enabling KERNEL_STP in br_stp_start") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mintz, Yuval authored
[ Upstream commit 3968d389 ] Apparently multi-cos isn't working for bnx2x quite some time - driver implements ndo_select_queue() to allow queue-selection for FCoE, but the regular L2 flow would cause it to modulo the fallback's result by the number of queues. The fallback would return a queue matching the needed tc [via __skb_tx_hash()], but since the modulo is by the number of TSS queues where number of TCs is not accounted, transmission would always be done by a queue configured into using TC0. Fixes: ada7c19e ("bnx2x: use XPS if possible for bnx2x_select_queue instead of pure hash") Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 07 Jun, 2017 21 commits
-
-
Greg Kroah-Hartman authored
-
Jan Kara authored
commit d7fd2425 upstream. There is an off-by-one error in loop termination conditions in xfs_find_get_desired_pgoff() since 'end' may index a page beyond end of desired range if 'endoff' is page aligned. It doesn't have any visible effects but still it is good to fix it. Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Sandeen authored
commit a4d768e7 upstream. This structure copy was throwing unaligned access warnings on sparc64: Kernel unaligned access at TPC[1043c088] xfs_btree_visit_blocks+0x88/0xe0 [xfs] xfs_btree_copy_ptrs does a memcpy, which avoids it. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Darrick J. Wong authored
commit 3ecb3ac7 upstream. If a malicious user corrupts the refcount btree to cause a cycle between different levels of the tree, the next mount attempt will deadlock in the CoW recovery routine while grabbing buffer locks. We can use the ability to re-grab a buffer that was previous locked to a transaction to avoid deadlocks, so do that here. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christoph Hellwig authored
This is a partial cherry-pick of commit e89c0413 ("xfs: implement the GETFSMAP ioctl"), which also adds this helper, and a great example of why feature patches should be properly split into their parts. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> [hch: split from the larger patch for -stable] Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Zorro Lang authored
commit 892d2a5f upstream. By run fsstress long enough time enough in RHEL-7, I find an assertion failure (harder to reproduce on linux-4.11, but problem is still there): XFS: Assertion failed: (iflags & BMV_IF_DELALLOC) != 0, file: fs/xfs/xfs_bmap_util.c The assertion is in xfs_getbmap() funciton: if (map[i].br_startblock == DELAYSTARTBLOCK && --> map[i].br_startoff <= XFS_B_TO_FSB(mp, XFS_ISIZE(ip))) ASSERT((iflags & BMV_IF_DELALLOC) != 0); When map[i].br_startoff == XFS_B_TO_FSB(mp, XFS_ISIZE(ip)), the startoff is just at EOF. But we only need to make sure delalloc extents that are within EOF, not include EOF. Signed-off-by:
Zorro Lang <zlang@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Darrick J. Wong authored
commit 6eadbf4c upstream. When we're fulfilling a BMAPX request, jump out early if the data fork is in local format. This prevents us from hitting a debugging check in bmapi_read and barfing errors back to userspace. The on-disk extent count check later isn't sufficient for IF_DELALLOC mode because da extents are in memory and not on disk. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Brian Foster authored
commit 0daaecac upstream. The delalloc -> real block conversion path uses an incorrect calculation in the case where the middle part of a delalloc extent is being converted. This is documented as a rare situation because XFS generally attempts to maximize contiguity by converting as much of a delalloc extent as possible. If this situation does occur, the indlen reservation for the two new delalloc extents left behind by the conversion of the middle range is calculated and compared with the original reservation. If more blocks are required, the delta is allocated from the global block pool. This delta value can be characterized as the difference between the new total requirement (temp + temp2) and the currently available reservation minus those blocks that have already been allocated (startblockval(PREV.br_startblock) - allocated). The problem is that the current code does not account for previously allocated blocks correctly. It subtracts the current allocation count from the (new - old) delta rather than the old indlen reservation. This means that more indlen blocks than have been allocated end up stashed in the remaining extents and free space accounting is broken as a result. Fix up the calculation to subtract the allocated block count from the original extent indlen and thus correctly allocate the reservation delta based on the difference between the new total requirement and the unused blocks from the original reservation. Also remove a bogus assert that contradicts the fact that the new indlen reservation can be larger than the original indlen reservation. Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eryu Guan authored
commit 161f55ef upstream. Commit 28b783e4 ("xfs: bufferhead chains are invalid after end_page_writeback") fixed one use-after-free issue by pre-calculating the loop conditionals before calling bh->b_end_io() in the end_io processing loop, but it assigned 'next' pointer before checking end offset boundary & breaking the loop, at which point the bh might be freed already, and caused use-after-free. This is caught by KASAN when running fstests generic/127 on sub-page block size XFS. [ 2517.244502] run fstests generic/127 at 2017-04-27 07:30:50 [ 2747.868840] ================================================================== [ 2747.876949] BUG: KASAN: use-after-free in xfs_destroy_ioend+0x3d3/0x4e0 [xfs] at addr ffff8801395ae698 ... [ 2747.918245] Call Trace: [ 2747.920975] dump_stack+0x63/0x84 [ 2747.924673] kasan_object_err+0x21/0x70 [ 2747.928950] kasan_report+0x271/0x530 [ 2747.933064] ? xfs_destroy_ioend+0x3d3/0x4e0 [xfs] [ 2747.938409] ? end_page_writeback+0xce/0x110 [ 2747.943171] __asan_report_load8_noabort+0x19/0x20 [ 2747.948545] xfs_destroy_ioend+0x3d3/0x4e0 [xfs] [ 2747.953724] xfs_end_io+0x1af/0x2b0 [xfs] [ 2747.958197] process_one_work+0x5ff/0x1000 [ 2747.962766] worker_thread+0xe4/0x10e0 [ 2747.966946] kthread+0x2d3/0x3d0 [ 2747.970546] ? process_one_work+0x1000/0x1000 [ 2747.975405] ? kthread_create_on_node+0xc0/0xc0 [ 2747.980457] ? syscall_return_slowpath+0xe6/0x140 [ 2747.985706] ? do_page_fault+0x30/0x80 [ 2747.989887] ret_from_fork+0x2c/0x40 [ 2747.993874] Object at ffff8801395ae690, in cache buffer_head size: 104 [ 2748.001155] Allocated: [ 2748.003782] PID = 8327 [ 2748.006411] save_stack_trace+0x1b/0x20 [ 2748.010688] save_stack+0x46/0xd0 [ 2748.014383] kasan_kmalloc+0xad/0xe0 [ 2748.018370] kasan_slab_alloc+0x12/0x20 [ 2748.022648] kmem_cache_alloc+0xb8/0x1b0 [ 2748.027024] alloc_buffer_head+0x22/0xc0 [ 2748.031399] alloc_page_buffers+0xd1/0x250 [ 2748.035968] create_empty_buffers+0x30/0x410 [ 2748.040730] create_page_buffers+0x120/0x1b0 [ 2748.045493] __block_write_begin_int+0x17a/0x1800 [ 2748.050740] iomap_write_begin+0x100/0x2f0 [ 2748.055308] iomap_zero_range_actor+0x253/0x5c0 [ 2748.060362] iomap_apply+0x157/0x270 [ 2748.064347] iomap_zero_range+0x5a/0x80 [ 2748.068624] iomap_truncate_page+0x6b/0xa0 [ 2748.073227] xfs_setattr_size+0x1f7/0xa10 [xfs] [ 2748.078312] xfs_vn_setattr_size+0x68/0x140 [xfs] [ 2748.083589] xfs_file_fallocate+0x4ac/0x820 [xfs] [ 2748.088838] vfs_fallocate+0x2cf/0x780 [ 2748.093021] SyS_fallocate+0x48/0x80 [ 2748.097006] do_syscall_64+0x18a/0x430 [ 2748.101186] return_from_SYSCALL_64+0x0/0x6a [ 2748.105948] Freed: [ 2748.108189] PID = 8327 [ 2748.110816] save_stack_trace+0x1b/0x20 [ 2748.115093] save_stack+0x46/0xd0 [ 2748.118788] kasan_slab_free+0x73/0xc0 [ 2748.122969] kmem_cache_free+0x7a/0x200 [ 2748.127247] free_buffer_head+0x41/0x80 [ 2748.131524] try_to_free_buffers+0x178/0x250 [ 2748.136316] xfs_vm_releasepage+0x2e9/0x3d0 [xfs] [ 2748.141563] try_to_release_page+0x100/0x180 [ 2748.146325] invalidate_inode_pages2_range+0x7da/0xcf0 [ 2748.152087] xfs_shift_file_space+0x37d/0x6e0 [xfs] [ 2748.157557] xfs_collapse_file_space+0x49/0x120 [xfs] [ 2748.163223] xfs_file_fallocate+0x2a7/0x820 [xfs] [ 2748.168462] vfs_fallocate+0x2cf/0x780 [ 2748.172642] SyS_fallocate+0x48/0x80 [ 2748.176629] do_syscall_64+0x18a/0x430 [ 2748.180810] return_from_SYSCALL_64+0x0/0x6a Fixed it by checking on offset against end & breaking out first, dereference bh only if there're still bufferheads to process. Signed-off-by:
Eryu Guan <eguan@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Darrick J. Wong authored
commit fe0be23e upstream. In xfs_reflink_end_cow, we erroneously reserve only enough blocks to handle adding 1 extent. This is problematic if we fragment free space, have to do CoW, and then have to perform multiple bmap btree expansions. Furthermore, the BUI recovery routine doesn't reserve /any/ blocks to handle btree splits, so log recovery fails after our first error causes the filesystem to go down. Therefore, refactor the transaction block reservation macros until we have a macro that works for our deferred (re)mapping activities, and fix both problems by using that macro. With 1k blocks we can hit this fairly often in g/187 if the scratch fs is big enough. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Brian Foster authored
commit e20c8a51 upstream. The quotaoff operation has a race with inode allocation that results in a livelock. An inode allocation that occurs before the quota status flags are updated acquires the appropriate dquots for the inode via xfs_qm_vop_dqalloc(). It then inserts the XFS_INEW inode into the perag radix tree, sometime later attaches the dquots to the inode and finally clears the XFS_INEW flag. Quotaoff expects to release the dquots from all inodes in the filesystem via xfs_qm_dqrele_all_inodes(). This invokes the AG inode iterator, which skips inodes in the XFS_INEW state because they are not fully constructed. If the scan occurs after dquots have been attached to an inode, but before XFS_INEW is cleared, the newly allocated inode will continue to hold a reference to the applicable dquots. When quotaoff invokes xfs_qm_dqpurge_all(), the reference count of those dquot(s) remain elevated and the dqpurge scan spins indefinitely. To address this problem, update the xfs_qm_dqrele_all_inodes() scan to wait on inodes marked on the XFS_INEW state. We wait on the inodes explicitly rather than skip and retry to avoid continuous retry loops due to a parallel inode allocation workload. Since quotaoff updates the quota state flags and uses a synchronous transaction before the dqrele scan, and dquots are attached to inodes after radix tree insertion iff quota is enabled, one INEW waiting pass through the AG guarantees that the scan has processed all inodes that could possibly hold dquot references. Reported-by:
Eryu Guan <eguan@redhat.com> Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Brian Foster authored
commit ae2c4ac2 upstream. The AG inode iterator currently skips new inodes as such inodes are inserted into the inode radix tree before they are fully constructed. Certain contexts require the ability to wait on the construction of new inodes, however. The fs-wide dquot release from the quotaoff sequence is an example of this. Update the AG inode iterator to support the ability to wait on inodes flagged with XFS_INEW upon request. Create a new xfs_inode_ag_iterator_flags() interface and support a set of iteration flags to modify the iteration behavior. When the XFS_AGITER_INEW_WAIT flag is set, include XFS_INEW flags in the radix tree inode lookup and wait on them before the callback is executed. Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Brian Foster authored
commit 756baca2 upstream. Inodes that are inserted into the perag tree but still under construction are flagged with the XFS_INEW bit. Most contexts either skip such inodes when they are encountered or have the ability to handle them. The runtime quotaoff sequence introduces a context that must wait for construction of such inodes to correctly ensure that all dquots in the fs are released. In anticipation of this, support the ability to wait on new inodes. Wake the appropriate bit when XFS_INEW is cleared. Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Brian Foster authored
commit 20e8a063 upstream. The quotacheck error handling of the delwri buffer list assumes the resident buffers are locked and doesn't clear the _XBF_DELWRI_Q flag on the buffers that are dequeued. This can lead to assert failures on buffer release and possibly other locking problems. Move this code to a delwri queue cancel helper function to encapsulate the logic required to properly release buffers from a delwri queue. Update the helper to clear the delwri queue flag and call it from quotacheck. Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Brian Foster authored
commit cb52ee33 upstream. Directory block readahead uses a complex iteration mechanism to map between high-level directory blocks and underlying physical extents. This mechanism attempts to traverse the higher-level dir blocks in a manner that handles multi-fsb directory blocks and simultaneously maintains a reference to the corresponding physical blocks. This logic doesn't handle certain (discontiguous) physical extent layouts correctly with multi-fsb directory blocks. For example, consider the case of a 4k FSB filesystem with a 2 FSB (8k) directory block size and a directory with the following extent layout: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..7]: 88..95 0 (88..95) 8 1: [8..15]: 80..87 0 (80..87) 8 2: [16..39]: 168..191 0 (168..191) 24 3: [40..63]: 5242952..5242975 1 (72..95) 24 Directory block 0 spans physical extents 0 and 1, dirblk 1 lies entirely within extent 2 and dirblk 2 spans extents 2 and 3. Because extent 2 is larger than the directory block size, the readahead code erroneously assumes the block is contiguous and issues a readahead based on the physical mapping of the first fsb of the dirblk. This results in read verifier failure and a spurious corruption or crc failure, depending on the filesystem format. Further, the subsequent readahead code responsible for walking through the physical table doesn't correctly advance the physical block reference for dirblk 2. Instead of advancing two physical filesystem blocks, the first iteration of the loop advances 1 block (correctly), but the subsequent iteration advances 2 more physical blocks because the next physical extent (extent 3, above) happens to cover more than dirblk 2. At this point, the higher-level directory block walking is completely off the rails of the actual physical layout of the directory for the respective mapping table. Update the contiguous dirblock logic to consider the current offset in the physical extent to avoid issuing directory readahead to unrelated blocks. Also, update the mapping table advancing code to consider the current offset within the current dirblock to avoid advancing the mapping reference too far beyond the dirblock. Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Sandeen authored
commit 023cc840 upstream. Carlos had a case where "find" seemed to start spinning forever and never return. This was on a filesystem with non-default multi-fsb (8k) directory blocks, and a fragmented directory with extents like this: 0:[0,133646,2,0] 1:[2,195888,1,0] 2:[3,195890,1,0] 3:[4,195892,1,0] 4:[5,195894,1,0] 5:[6,195896,1,0] 6:[7,195898,1,0] 7:[8,195900,1,0] 8:[9,195902,1,0] 9:[10,195908,1,0] 10:[11,195910,1,0] 11:[12,195912,1,0] 12:[13,195914,1,0] ... i.e. the first extent is a contiguous 2-fsb dir block, but after that it is fragmented into 1 block extents. At the top of the readdir path, we allocate a mapping array which (for this filesystem geometry) can hold 10 extents; see the assignment to map_info->map_size. During readdir, we are therefore able to map extents 0 through 9 above into the array for readahead purposes. If we count by 2, we see that the last mapped index (9) is the first block of a 2-fsb directory block. At the end of xfs_dir2_leaf_readbuf() we have 2 loops to fill more readahead; the outer loop assumes one full dir block is processed each loop iteration, and an inner loop that ensures that this is so by advancing to the next extent until a full directory block is mapped. The problem is that this inner loop may step past the last extent in the mapping array as it tries to reach the end of the directory block. This will read garbage for the extent length, and as a result the loop control variable 'j' may become corrupted and never fail the loop conditional. The number of valid mappings we have in our array is stored in map->map_valid, so stop this inner loop based on that limit. There is an ASSERT at the top of the outer loop for this same condition, but we never made it out of the inner loop, so the ASSERT never fired. Huge appreciation for Carlos for debugging and isolating the problem. Debugged-and-analyzed-by:
Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Tested-by:
Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by:
Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by:
Bill O'Donnell <billodo@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christoph Hellwig authored
commit 52813fb1 upstream. bno should be a xfs_fsblock_t, which is 64-bit wides instead of a xfs_aglock_t, which truncates the value to 32 bits. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Brian Foster authored
commit 3b4683c2 upstream. Lockdep complains about use of the iolock in inode reclaim context because it doesn't understand that reclaim has the last reference to the inode, and thus an iolock->reclaim->iolock deadlock is not possible. The iolock is technically not necessary in xfs_inactive() and was only added to appease an assert in xfs_free_eofblocks(), which can be called from other non-reclaim contexts. Therefore, just kill the assert and drop the use of the iolock from reclaim context to quiet lockdep. Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Darrick J. Wong authored
commit 84358536 upstream. Apparently FIEMAP for xattrs has been broken since we switched to the iomap backend because of an incorrect check for xattr presence. Also fix the broken locking. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Darrick J. Wong authored
commit be6324c0 upstream. In xfs_ioc_getbmap, we should only copy the fields of struct getbmap from userspace, or else we end up copying random stack contents into the kernel. struct getbmap is a strict subset of getbmapx, so a partial structure copy should work fine. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Brian Foster authored
commit 696a5620 upstream. The log covering background task used to be part of the xfssyncd workqueue. That workqueue was removed as of commit 5889608d ("xfs: syncd workqueue is no more") and the associated work item scheduled to the xfs-log wq. The latter is used for log buffer I/O completion. Since xfs_log_worker() can invoke a log flush, a deadlock is possible between the xfs-log and xfs-cil workqueues. Consider the following codepath from xfs_log_worker(): xfs_log_worker() xfs_log_force() _xfs_log_force() xlog_cil_force() xlog_cil_force_lsn() xlog_cil_push_now() flush_work() The above is in xfs-log wq context and blocked waiting on the completion of an xfs-cil work item. Concurrently, the cil push in progress can end up blocked here: xlog_cil_push_work() xlog_cil_push() xlog_write() xlog_state_get_iclog_space() xlog_wait(&log->l_flush_wait, ...) The above is in xfs-cil context waiting on log buffer I/O completion, which executes in xfs-log wq context. In this scenario both workqueues are deadlocked waiting on eachother. Add a new workqueue specifically for the high level log covering and ail pushing worker, as was the case prior to commit 5889608d. Diagnosed-by:
David Jeffery <djeffery@redhat.com> Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-