We must hold a reference over the call to filemap_release_folio(),
otherwise the page cache will put the last reference to the folio
before we unlock it, leading to splats like this:

 BUG: Bad page state in process u8:5  pfn:1ab1f4
 page:ffffea0006ac7d00 refcount:0 mapcount:0 mapping:0000000000000000 index:0x28b1de pfn:0x1ab1f4
 flags: 0x17ff80000040001(locked|reclaim|node=0|zone=2|lastcpupid=0xfff)
 raw: 017ff80000040001 dead000000000100 dead000000000122 0000000000000000
 raw: 000000000028b1de 0000000000000000 00000000ffffffff 0000000000000000
 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set

It's an error path, so it doesn't see much testing.
Reported-by: Darrick J. Wong <djwong@kernel.org>
Fixes: a42634a6 ("readahead: Use a folio in read_pages()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>

Pull ext2, writeback, and quota fixes and cleanups from Jan Kara:
 "A fix for race in writeback code and two cleanups in quota and ext2"

* tag 'fs_for_v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: Prevent memory allocation recursion while holding dq_lock
  writeback: Fix inode->i_io_list not be protected by inode->i_lock error
  fs: Fix syntax errors in comments

Pull powerpc fixes from Michael Ellerman:

 - On 32-bit fix overread/overwrite of thread_struct via ptrace
   PEEK/POKE.

 - Fix softirqs not switching to the softirq stack since we moved
   irq_exit().

 - Force thread size increase when KASAN is enabled to avoid stack
   overflows.

 - On Book3s 64 mark more code as not to be instrumented by KASAN to
   avoid crashes.

 - Exempt __get_wchan() from KASAN checking, as it's inherently racy.

 - Fix a recently introduced crash in the papr_scm driver in some
   configurations.

 - Remove include of <generated/compile.h> which is forbidden.

Thanks to Ariel Miculas, Chen Jingwen, Christophe Leroy, Erhard Furtner,
He Ying, Kees Cook, Masahiro Yamada, Nageswara R Sastry, Paul Mackerras,
Sachin Sant, Vaibhav Jain, and Wanming Hu.

* tag 'powerpc-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/32: Fix overread/overwrite of thread_struct via ptrace
  powerpc/book3e: get rid of #include <generated/compile.h>
  powerpc/kasan: Force thread size increase with KASAN
  powerpc/papr_scm: don't requests stats with '0' sized stats buffer
  powerpc: Don't select HAVE_IRQ_EXIT_ON_IRQ_STACK
  powerpc/kasan: Silence KASAN warnings in __get_wchan()
  powerpc/kasan: Mark more real-mode code as not to be instrumented

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf and netfilter.

  Current release - regressions:

   - eth: amt: fix possible null-ptr-deref in amt_rcv()

  Previous releases - regressions:

   - tcp: use alloc_large_system_hash() to allocate table_perturb

   - af_unix: fix a data-race in unix_dgram_peer_wake_me()

   - nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling

   - eth: ixgbe: fix unexpected VLAN rx in promisc mode on VF

  Previous releases - always broken:

   - ipv6: fix signed integer overflow in __ip6_append_data

   - netfilter:
       - nat: really support inet nat without l3 address
       - nf_tables: memleak flow rule from commit path

   - bpf: fix calling global functions from BPF_PROG_TYPE_EXT programs

   - openvswitch: fix misuse of the cached connection on tuple changes

   - nfc: nfcmrvl: fix memory leak in nfcmrvl_play_deferred

   - eth: altera: fix refcount leak in altera_tse_mdio_create

  Misc:

   - add Quentin Monnet to bpftool maintainers"

* tag 'net-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
  net: amd-xgbe: fix clang -Wformat warning
  tcp: use alloc_large_system_hash() to allocate table_perturb
  net: dsa: realtek: rtl8365mb: fix GMII caps for ports with internal PHY
  net: dsa: mv88e6xxx: correctly report serdes link failure
  net: dsa: mv88e6xxx: fix BMSR error to be consistent with others
  net: dsa: mv88e6xxx: use BMSR_ANEGCOMPLETE bit for filling an_complete
  net: altera: Fix refcount leak in altera_tse_mdio_create
  net: openvswitch: fix misuse of the cached connection on tuple changes
  net: ethernet: mtk_eth_soc: fix misuse of mem alloc interface netdev[napi]_alloc_frag
  ip_gre: test csum_start instead of transport header
  au1000_eth: stop using virt_to_bus()
  ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg
  ipv6: Fix signed integer overflow in __ip6_append_data
  nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred
  nfc: st21nfca: fix incorrect sizing calculations in EVT_TRANSACTION
  nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling
  nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION
  net: ipv6: unexport __init-annotated seg6_hmac_init()
  net: xfrm: unexport __init-annotated xfrm4_protocol_init()
  net: mdio: unexport __init-annotated mdio_bus_init()
  ...

This is a pure band-aid so that I can continue merging stuff from people
while some of the gcc-12 fallout gets sorted out.

In particular, gcc-12 is very unhappy about the kinds of pointer
arithmetic tricks that netfs does, and that makes the fortify checks
trigger in afs and ceph:

  In function ‘fortify_memset_chk’,
      inlined from ‘netfs_i_context_init’ at include/linux/netfs.h:327:2,
      inlined from ‘afs_set_netfs_context’ at fs/afs/inode.c:61:2,
      inlined from ‘afs_root_iget’ at fs/afs/inode.c:543:2:
  include/linux/fortify-string.h:258:25: warning: call to ‘__write_overflow_field’ declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
    258 |                         __write_overflow_field(p_size_field, size);
        |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

and the reason is that netfs_i_context_init() is passed a 'struct inode'
pointer, and then it does

        struct netfs_i_context *ctx = netfs_i_context(inode);

        memset(ctx, 0, sizeof(*ctx));

where that netfs_i_context() function just does pointer arithmetic on
the inode pointer, knowing that the netfs_i_context is laid out
immediately after it in memory.

This is all truly disgusting, since the whole "netfs_i_context is laid
out immediately after it in memory" is not actually remotely true in
general, but is just made to be that way for afs and ceph.

See for example fs/cifs/cifsglob.h:

  struct cifsInodeInfo {
        struct {
                /* These must be contiguous */
                struct inode    vfs_inode;      /* the VFS's inode record */
                struct netfs_i_context netfs_ctx; /* Netfslib context */
        };
	[...]

and realize that this is all entirely wrong, and the pointer arithmetic
that netfs_i_context() is doing is also very very wrong and wouldn't
give the right answer if netfs_ctx had different alignment rules from a
'struct inode', for example).

Anyway, that's just a long-winded way to say "the gcc-12 warning is
actually quite reasonable, and our code happens to work but is pretty
disgusting".

This is getting fixed properly, but for now I made the mistake of
thinking "the week right after the merge window tends to be calm for me
as people take a breather" and I did a sustem upgrade.  And I got gcc-12
as a result, so to continue merging fixes from people and not have the
end result drown in warnings, I am fixing all these gcc-12 issues I hit.

Including with these kinds of temporary fixes.

Cc: Kees Cook <keescook@chromium.org>
Cc: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/all/AEEBCF5D-8402-441D-940B-105AA718C71F@chromium.org/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In commit 8b202ee2 ("s390: disable -Warray-bounds") the s390 people
disabled the '-Warray-bounds' warning for gcc-12, because the new logic
in gcc would cause warnings for their use of the S390_lowcore macro,
which accesses absolute pointers.

It turns out gcc-12 has many other issues in this area, so this takes
that s390 warning disable logic, and turns it into a kernel build config
entry instead.

Part of the intent is that we can make this all much more targeted, and
use this conflig flag to disable it in only particular configurations
that cause problems, with the s390 case as an example:

        select GCC12_NO_ARRAY_BOUNDS

and we could do that for other configuration cases that cause issues.

Or we could possibly use the CONFIG_CC_NO_ARRAY_BOUNDS thing in a more
targeted way, and disable the warning only for particular uses: again
the s390 case as an example:

  KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_CC_NO_ARRAY_BOUNDS),-Wno-array-bounds)

but this ends up just doing it globally in the top-level Makefile, since
the current issues are spread fairly widely all over:

  KBUILD_CFLAGS-$(CONFIG_CC_NO_ARRAY_BOUNDS) += -Wno-array-bounds

We'll try to limit this later, since the gcc-12 problems are rare enough
that *much* of the kernel can be built with it without disabling this
warning.

Cc: Kees Cook <keescook@chromium.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gcc-12 started warning about 'tracker' being used uninitialized:

  drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c: In function ‘mlx5_do_bond’:
  drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c:786:28: warning: ‘tracker’ is used uninitialized [-Wuninitialized]
    786 |         struct lag_tracker tracker;
        |                            ^~~~~~~

which seems to be because it doesn't track how the use (and
initialization) is bound by the 'do_bond' flag.

But admittedly that 'do_bond' usage is fairly complicated, and involves
passing it around as an argument to helper functions, so it's somewhat
understandable that gcc doesn't see how that all works.

This function could be rewritten to make the use of that tracker
variable more obviously safe, but for now I'm just adding the forced
initialization of it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

While the concept of checking for dangling pointers to local variables
at function exit is really interesting, the gcc-12 implementation is not
compatible with reality, and results in false positives.

For example, gcc sees us putting things on a local list head allocated
on the stack, which involves exactly those kinds of pointers to the
local stack entry:

  In function ‘__list_add’,
      inlined from ‘list_add_tail’ at include/linux/list.h:102:2,
      inlined from ‘rebuild_snap_realms’ at fs/ceph/snap.c:434:2:
  include/linux/list.h:74:19: warning: storing the address of local variable ‘realm_queue’ in ‘*&realm_27(D)->rebuild_item.prev’ [-Wdangling-pointer=]
     74 |         new->prev = prev;
        |         ~~~~~~~~~~^~~~~~

But then gcc - understandably - doesn't really understand the big
picture how the doubly linked list works, so doesn't see how we then end
up emptying said list head in a loop and the pointer we added has been
removed.

Gcc also complains about us (intentionally) using this as a way to store
a kind of fake stack trace, eg

  drivers/acpi/acpica/utdebug.c:40:38: warning: storing the address of local variable ‘current_sp’ in ‘acpi_gbl_entry_stack_pointer’ [-Wdangling-pointer=]
     40 |         acpi_gbl_entry_stack_pointer = &current_sp;
        |         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~

which is entirely reasonable from a compiler standpoint, and we may want
to change those kinds of patterns, but not not.

So this is one of those "it would be lovely if the compiler were to
complain about us leaving dangling pointers to the stack", but not this
way.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Gcc-12 correctly warned about this code using a non-NULL pointer as a
truth value:

  drivers/gpu/drm/imx/ipuv3-crtc.c: In function ‘ipu_crtc_disable_planes’:
  drivers/gpu/drm/imx/ipuv3-crtc.c:72:21: error: the comparison will always evaluate as ‘true’ for the address of ‘plane’ will never be NULL [-Werror=address]
     72 |                 if (&ipu_crtc->plane[1] && plane == &ipu_crtc->plane[1]->base)
        |                     ^

due to the extraneous '&' address-of operator.

Philipp Zabel points out that The mistake had no adverse effect since
the following condition doesn't actually dereference the NULL pointer,
but the intent of the code was obviously to check for it, not to take
the address of the member.

Fixes: eb8c8880 ("drm/imx: add deferred plane disabling")
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The ptrace PEEKUSR/POKEUSR (aka PEEKUSER/POKEUSER) API allows a process
to read/write registers of another process.

To get/set a register, the API takes an index into an imaginary address
space called the "USER area", where the registers of the process are
laid out in some fashion.

The kernel then maps that index to a particular register in its own data
structures and gets/sets the value.

The API only allows a single machine-word to be read/written at a time.
So 4 bytes on 32-bit kernels and 8 bytes on 64-bit kernels.

The way floating point registers (FPRs) are addressed is somewhat
complicated, because double precision float values are 64-bit even on
32-bit CPUs. That means on 32-bit kernels each FPR occupies two
word-sized locations in the USER area. On 64-bit kernels each FPR
occupies one word-sized location in the USER area.

Internally the kernel stores the FPRs in an array of u64s, or if VSX is
enabled, an array of pairs of u64s where one half of each pair stores
the FPR. Which half of the pair stores the FPR depends on the kernel's
endianness.

To handle the different layouts of the FPRs depending on VSX/no-VSX and
big/little endian, the TS_FPR() macro was introduced.

Unfortunately the TS_FPR() macro does not take into account the fact
that the addressing of each FPR differs between 32-bit and 64-bit
kernels. It just takes the index into the "USER area" passed from
userspace and indexes into the fp_state.fpr array.

On 32-bit there are 64 indexes that address FPRs, but only 32 entries in
the fp_state.fpr array, meaning the user can read/write 256 bytes past
the end of the array. Because the fp_state sits in the middle of the
thread_struct there are various fields than can be overwritten,
including some pointers. As such it may be exploitable.

It has also been observed to cause systems to hang or otherwise
misbehave when using gdbserver, and is probably the root cause of this
report which could not be easily reproduced:
  https://lore.kernel.org/linuxppc-dev/dc38afe9-6b78-f3f5-666b-986939e40fc6@keymile.com/

Rather than trying to make the TS_FPR() macro even more complicated to
fix the bug, or add more macros, instead add a special-case for 32-bit
kernels. This is more obvious and hopefully avoids a similar bug
happening again in future.

Note that because 32-bit kernels never have VSX enabled the code doesn't
need to consider TS_FPRWIDTH/OFFSET at all. Add a BUILD_BUG_ON() to
ensure that 32-bit && VSX is never enabled.

Fixes: 87fec051 ("powerpc: PTRACE_PEEKUSR/PTRACE_POKEUSER of FPR registers in little endian builds")
Cc: stable@vger.kernel.org # v3.13+
Reported-by: Ariel Miculas <ariel.miculas@belden.com>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220609133245.573565-1-mpe@ellerman.id.au

see warning:
| drivers/net/ethernet/amd/xgbe/xgbe-drv.c:2787:43: warning: format specifies
| type 'unsigned short' but the argument has type 'int' [-Wformat]
|        netdev_dbg(netdev, "Protocol: %#06hx\n", ntohs(eth->h_proto));
|                                      ~~~~~~     ^~~~~~~~~~~~~~~~~~~

Variadic functions (printf-like) undergo default argument promotion.
Documentation/core-api/printk-formats.rst specifically recommends
using the promoted-to-type's format flag.

Also, as per C11 6.3.1.1:
(https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1548.pdf)
`If an int can represent all values of the original type ..., the
value is converted to an int; otherwise, it is converted to an
unsigned int. These are called the integer promotions.`

Since the argument is a u16 it will get promoted to an int and thus it is
most accurate to use the %x format specifier here. It should be noted that the
`#06` formatting sugar does not alter the promotion rules.

Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by: Justin Stitt <jstitt007@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20220607191119.20686-1-jstitt007@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In our server, there may be no high order (>= 6) memory since we reserve
lots of HugeTLB pages when booting.  Then the system panic.  So use
alloc_large_system_hash() to allocate table_perturb.

Fixes: e9261476 ("tcp: dynamically allocate the perturb table used by source ports")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220607070214.94443-1-songmuchun@bytedance.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit a18e6521 ("net: phylink: handle NA interface mode in
phylink_fwnode_phy_connect()"), phylib defaults to GMII when no phy-mode
or phy-connection-type property is specified in a DSA port node of the
device tree. The same commit caused a regression in rtl8365mb whereby
phylink would fail to connect, because the driver did not advertise
support for GMII for ports with internal PHY.

It should be noted that the aforementioned regression is not because the
blamed commit was incorrect: on the contrary, the blamed commit is
correcting the previous behaviour whereby unspecified phy-mode would
cause the internal interface mode to be PHY_INTERFACE_MODE_NA. The
rtl8365mb driver only worked by accident before because it _did_
advertise support for PHY_INTERFACE_MODE_NA, despite NA being reserved
for internal use by phylink. With one mistake fixed, the other was
exposed.

Commit a5dba0f2 ("net: dsa: rtl8365mb: add GMII as user port mode")
then introduced implicit support for GMII mode on ports with internal
PHY to allow a PHY connection for device trees where the phy-mode is not
explicitly set to "internal". At this point everything was working OK
again.

Subsequently, commit 6ff60646 ("net: dsa: realtek: convert to
phylink_generic_validate()") broke this behaviour again by discarding
the usage of rtl8365mb_phy_mode_supported() - where this GMII support
was indicated - while switching to the new .phylink_get_caps API.

With the new API, rtl8365mb_phy_mode_supported() is no longer needed.
Remove it altogether and add back the GMII capability - this time to
rtl8365mb_phylink_get_caps() - so that the above default behaviour works
for ports with internal PHY again.

Fixes: 6ff60646 ("net: dsa: realtek: convert to phylink_generic_validate()")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220607184624.417641-1-alvin@pqrs.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-06-07

This series contains updates to ixgbe driver only.

Olivier Matz resolves an issue so that broadcast packets can still be
received when VF removes promiscuous settings and removes setting of
VLAN promiscuous, in promiscuous mode, to prevent a loop when VFs are
bridged.

* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ixgbe: fix unexpected VLAN Rx in promisc mode on VF
  ixgbe: fix bcast packets Rx on VF after promisc removal
====================

Link: https://lore.kernel.org/r/20220607181538.748786-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Russell King says:

====================
mv88e6xxx: fixes for reading serdes state

These are some low-priority fixes to the mv88e6xxx serdes code.
Patch 1 fixes the reporting of an_complete, which is used in the
emulation of a conventional C22 PHY. Patch from Marek.

Patch 2 makes one of the error messages in patch 2 to be consistent
with the other error messages in this function.

Patch 3 ensures that we do not miss a link-failure event.
====================

Link: https://lore.kernel.org/r/Yp82TyoLon9jz6k3@shell.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Phylink wants to know if the link has dropped since the last time state
was retrieved, and the BMSR gives us that. Read the BMSR and use it when
deciding the link state. Fill in the an_complete member as well for the
emulated PHY state.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Other errors accessing the registers in mv88e6352_serdes_pcs_get_state()
print "PHY " before the register name, except for the BMSR. Make this
consistent with the other error messages.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit ede359d8 ("net: dsa: mv88e6xxx: Link in pcs_get_state() if AN
is bypassed") added the ability to link if AN was bypassed, and added
filling of state->an_complete field, but set it to true if AN was
enabled in BMCR, not when AN was reported complete in BMSR.

This was done because for some reason, when I wanted to use BMSR value
to infer an_complete, I was looking at BMSR_ANEGCAPABLE bit (which was
always 1), instead of BMSR_ANEGCOMPLETE bit.

Use BMSR_ANEGCOMPLETE for filling state->an_complete.

Fixes: ede359d8 ("net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Every iteration of for_each_child_of_node() decrements
the reference count of the previous node.
When break from a for_each_child_of_node() loop,
we need to explicitly call of_node_put() on the child node when
not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: bbd2190c ("Altera TSE: Add main and header file for Altera Ethernet Driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220607041144.7553-1-linmq006@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If packet headers changed, the cached nfct is no longer relevant
for the packet and attempt to re-use it leads to the incorrect packet
classification.

This issue is causing broken connectivity in OpenStack deployments
with OVS/OVN due to hairpin traffic being unexpectedly dropped.

The setup has datapath flows with several conntrack actions and tuple
changes between them:

  actions:ct(commit,zone=8,mark=0/0x1,nat(src)),
          set(eth(src=00:00:00:00:00:01,dst=00:00:00:00:00:06)),
          set(ipv4(src=172.18.2.10,dst=192.168.100.6,ttl=62)),
          ct(zone=8),recirc(0x4)

After the first ct() action the packet headers are almost fully
re-written.  The next ct() tries to re-use the existing nfct entry
and marks the packet as invalid, so it gets dropped later in the
pipeline.

Clearing the cached conntrack entry whenever packet tuple is changed
to avoid the issue.

The flow key should not be cleared though, because we should still
be able to match on the ct_state if the recirculation happens after
the tuple change but before the next ct() action.

Cc: stable@vger.kernel.org
Fixes: 7f8a436e ("openvswitch: Add conntrack action")
Reported-by: Frode Nordahl <frode.nordahl@canonical.com>
Link: https://mail.openvswitch.org/pipermail/ovs-discuss/2022-May/051829.html
Link: https://bugs.launchpad.net/ubuntu/+source/ovn/+bug/1967856Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://lore.kernel.org/r/20220606221140.488984-1-i.maximets@ovn.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When rx_flag == MTK_RX_FLAGS_HWLRO,
rx_data_len = MTK_MAX_LRO_RX_LENGTH(4096 * 3) > PAGE_SIZE.
netdev_alloc_frag is for alloction of page fragment only.
Reference to other drivers and Documentation/vm/page_frags.rst

Branch to use __get_free_pages when ring->frag_size > PAGE_SIZE.
Signed-off-by: Chen Lin <chen45464546@163.com>
Link: https://lore.kernel.org/r/1654692413-2598-1-git-send-email-chen45464546@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

GRE with TUNNEL_CSUM will apply local checksum offload on
CHECKSUM_PARTIAL packets.

ipgre_xmit must validate csum_start after an optional skb_pull,
else lco_csum may trigger an overflow. The original check was

	if (csum && skb_checksum_start(skb) < skb->data)
		return -EINVAL;

This had false positives when skb_checksum_start is undefined:
when ip_summed is not CHECKSUM_PARTIAL. A discussed refinement
was straightforward

	if (csum && skb->ip_summed == CHECKSUM_PARTIAL &&
	    skb_checksum_start(skb) < skb->data)
		return -EINVAL;

But was eventually revised more thoroughly:
- restrict the check to the only branch where needed, in an
  uncommon GRE path that uses header_ops and calls skb_pull.
- test skb_transport_header, which is set along with csum_start
  in skb_partial_csum_set in the normal header_ops datapath.

Turns out skbs can arrive in this branch without the transport
header set, e.g., through BPF redirection.

Revise the check back to check csum_start directly, and only if
CHECKSUM_PARTIAL. Do leave the check in the updated location.
Check field regardless of whether TUNNEL_CSUM is configured.

Link: https://lore.kernel.org/netdev/YS+h%2FtqCJJiQei+W@shredder/
Link: https://lore.kernel.org/all/20210902193447.94039-2-willemdebruijn.kernel@gmail.com/T/#u
Fixes: 8a0ed250 ("ip_gre: validate csum_start only on pull")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20220606132107.3582565-1-willemdebruijn.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2022-06-09

We've added 6 non-merge commits during the last 2 day(s) which contain
a total of 8 files changed, 49 insertions(+), 15 deletions(-).

The main changes are:

1) Fix an illegal copy_to_user() attempt seen by syzkaller through arm64
   BPF JIT compiler, from Eric Dumazet.

2) Fix calling global functions from BPF_PROG_TYPE_EXT programs by using
   the correct program context type, from Toke Høiland-Jørgensen.

3) Fix XSK TX batching invalid descriptor handling, from Maciej Fijalkowski.

4) Fix potential integer overflows in multi-kprobe link code by using safer
   kvmalloc_array() allocation helpers, from Dan Carpenter.

5) Add Quentin as bpftool maintainer, from Quentin Monnet.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  MAINTAINERS: Add a maintainer for bpftool
  xsk: Fix handling of invalid descriptors in XSK TX batching API
  selftests/bpf: Add selftest for calling global functions from freplace
  bpf: Fix calling global functions from BPF_PROG_TYPE_EXT programs
  bpf: Use safer kvmalloc_array() where possible
  bpf, arm64: Clear prog->jited_len along prog->jited
====================

Link: https://lore.kernel.org/r/20220608234133.32265-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

OpenSSL 3.0 deprecated the OpenSSL's ENGINE API.  That is as may be, but
the kernel build host tools still use it.  Disable the warning about
deprecated declarations until somebody who cares fixes it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The conversion to the dma-mapping API in linux-2.6.11 was incomplete
and left a virt_to_bus() call around. There have been a number of
fixes for DMA mapping API abuse in this driver, but this one always
slipped through.

Change it to just use the existing dma_addr_t pointer, and make it
use the correct types throughout the driver to make it easier to
understand the virtual vs dma address spaces.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Manuel Lauss <manuel.lauss@gmail.com>
Link: https://lore.kernel.org/r/20220607090206.19830-1-arnd@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When len >= INT_MAX - transhdrlen, ulen = len + transhdrlen will be
overflow. To fix, we can follow what udpv6 does and subtract the
transhdrlen from the max.
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/20220607120028.845916-2-wangyufen@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Resurrect ubsan overflow checks and ubsan report this warning,
fix it by change the variable [length] type to size_t.

UBSAN: signed-integer-overflow in net/ipv6/ip6_output.c:1489:19
2147479552 + 8567 cannot be represented in type 'int'
CPU: 0 PID: 253 Comm: err Not tainted 5.16.0+ #1
Hardware name: linux,dummy-virt (DT)
Call trace:
  dump_backtrace+0x214/0x230
  show_stack+0x30/0x78
  dump_stack_lvl+0xf8/0x118
  dump_stack+0x18/0x30
  ubsan_epilogue+0x18/0x60
  handle_overflow+0xd0/0xf0
  __ubsan_handle_add_overflow+0x34/0x44
  __ip6_append_data.isra.48+0x1598/0x1688
  ip6_append_data+0x128/0x260
  udpv6_sendmsg+0x680/0xdd0
  inet6_sendmsg+0x54/0x90
  sock_sendmsg+0x70/0x88
  ____sys_sendmsg+0xe8/0x368
  ___sys_sendmsg+0x98/0xe0
  __sys_sendmmsg+0xf4/0x3b8
  __arm64_sys_sendmmsg+0x34/0x48
  invoke_syscall+0x64/0x160
  el0_svc_common.constprop.4+0x124/0x300
  do_el0_svc+0x44/0xc8
  el0_svc+0x3c/0x1e8
  el0t_64_sync_handler+0x88/0xb0
  el0t_64_sync+0x16c/0x170

Changes since v1:
-Change the variable [length] type to unsigned, as Eric Dumazet suggested.
Changes since v2:
-Don't change exthdrlen type in ip6_make_skb, as Paolo Abeni suggested.
Changes since v3:
-Don't change ulen type in udpv6_sendmsg and l2tp_ip6_sendmsg, as
Jakub Kicinski suggested.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/20220607120028.845916-1-wangyufen@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Similar to the handling of play_deferred in commit 19cfe912
("Bluetooth: btusb: Fix memory leak in play_deferred"), we thought
a patch might be needed here as well.

Currently usb_submit_urb is called directly to submit deferred tx
urbs after unanchor them.

So the usb_giveback_urb_bh would failed to unref it in usb_unanchor_urb
and cause memory leak.

Put those urbs in tx_anchor to avoid the leak, and also fix the error
handling.
Signed-off-by: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220607083230.6182-1-xiaohuizhang@ruc.edu.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Martin Faltesek says:

====================
Split "nfc: st21nfca: Refactor EVT_TRANSACTION" into 3

v2: https://lore.kernel.org/netdev/20220401180939.2025819-1-mfaltesek@google.com/
v1: https://lore.kernel.org/netdev/20220329175431.3175472-1-mfaltesek@google.com/
====================

Link: https://lore.kernel.org/r/20220607025729.1673212-1-mfaltesek@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The transaction buffer is allocated by using the size of the packet buf,
and subtracting two which seem intended to remove the two tags which are
not present in the target structure. This calculation leads to under
counting memory because of differences between the packet contents and the
target structure. The aid_len field is a u8 in the packet, but a u32 in
the structure, resulting in at least 3 bytes always being under counted.
Further, the aid data is a variable length field in the packet, but fixed
in the structure, so if this field is less than the max, the difference is
added to the under counting.

The last validation check for transaction->params_len is also incorrect
since it employs the same accounting error.

To fix, perform validation checks progressively to safely reach the
next field, to determine the size of both buffers and verify both tags.
Once all validation checks pass, allocate the buffer and copy the data.
This eliminates freeing memory on the error path, as those checks are
moved ahead of memory allocation.

Fixes: 26fc6c7f ("NFC: st21nfca: Add HCI transaction event support")
Fixes: 4fbcc1a4 ("nfc: st21nfca: Fix potential buffer overflows in EVT_TRANSACTION")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Error paths do not free previously allocated memory. Add devm_kfree() to
those failure paths.

Fixes: 26fc6c7f ("NFC: st21nfca: Add HCI transaction event support")
Fixes: 4fbcc1a4 ("nfc: st21nfca: Fix potential buffer overflows in EVT_TRANSACTION")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The first validation check for EVT_TRANSACTION has two different checks
tied together with logical AND. One is a check for minimum packet length,
and the other is for a valid aid_tag. If either condition is true (fails),
then an error should be triggered.  The fix is to change && to ||.

Fixes: 26fc6c7f ("NFC: st21nfca: Add HCI transaction event support")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Masahiro Yamada says:

====================
net: unexport some symbols that are annotated __init

This patch set fixes odd combinations
of EXPORT_SYMBOL and __init.

Checking this in modpost is a good thing and I really wanted to do it,
but Linus Torvalds imposes a very strict rule, "No new warning".

I'd like the maintainer to kindly pick this up and send a fixes pull request.

Unless I eliminate all the sites of warnings beforehand,
Linus refuses to re-enable the modpost check. [1]

[1]: https://lore.kernel.org/linux-kbuild/CAK7LNATmd0bigp7HQ4fTzHw5ugZMkSb3UXG7L4fxpGbqkRKESA@mail.gmail.com/T/#m5e50cc2da17491ba210c72b5efdbc0ce76e0217f
====================

Link: https://lore.kernel.org/r/20220606045355.4160711-1-masahiroy@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.

modpost used to detect it, but it has been broken for a decade.

Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.

There are two ways to fix it:

  - Remove __init
  - Remove EXPORT_SYMBOL

I chose the latter for this case because the caller (net/ipv6/seg6.c)
and the callee (net/ipv6/seg6_hmac.c) belong to the same module.
It seems an internal function call in ipv6.ko.

Fixes: bf355b8d ("ipv6: sr: add core files for SR HMAC support")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.

modpost used to detect it, but it has been broken for a decade.

Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.

There are two ways to fix it:

  - Remove __init
  - Remove EXPORT_SYMBOL

I chose the latter for this case because the only in-tree call-site,
net/ipv4/xfrm4_policy.c is never compiled as modular.
(CONFIG_XFRM is boolean)

Fixes: 2f32b51b ("xfrm: Introduce xfrm_input_afinfo to access the the callbacks properly")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.

modpost used to detect it, but it has been broken for a decade.

Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.

There are two ways to fix it:

  - Remove __init
  - Remove EXPORT_SYMBOL

I chose the latter for this case because the only in-tree call-site,
drivers/net/phy/phy_device.c is never compiled as modular.
(CONFIG_PHYLIB is boolean)

Fixes: 90eff909 ("net: phy: Allow splitting MDIO bus/device support from PHYs")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull KVM fixes from Paolo Bonzini:

 - syzkaller NULL pointer dereference

 - TDP MMU performance issue with disabling dirty logging

 - 5.14 regression with SVM TSC scaling

 - indefinite stall on applying live patches

 - unstable selftest

 - memory leak from wrong copy-and-paste

 - missed PV TLB flush when racing with emulation

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: do not report a vCPU as preempted outside instruction boundaries
  KVM: x86: do not set st->preempted when going back to user space
  KVM: SVM: fix tsc scaling cache logic
  KVM: selftests: Make hyperv_clock selftest more stable
  KVM: x86/MMU: Zap non-leaf SPTEs when disabling dirty logging
  x86: drop bogus "cc" clobber from __try_cmpxchg_user_asm()
  KVM: x86/mmu: Check every prev_roots in __kvm_mmu_free_obsolete_roots()
  entry/kvm: Exit to user mode when TIF_NOTIFY_SIGNAL is set
  KVM: Don't null dereference ops->destroy

Merge tag 'tpmdd-next-v5.19-rc2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull tpm fix from Jarkko Sakkinen:
 "A bug fix for migratable (whether or not a key is tied to the TPM chip
  soldered to the machine) handling for TPM2 trusted keys"

* tag 'tpmdd-next-v5.19-rc2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  KEYS: trusted: tpm2: Fix migratable logic

I've been contributing and reviewing patches for bpftool for some time,
and I'm taking care of its external mirror. On Alexei, KP, and Daniel's
suggestion, I would like to step forwards and become a maintainer for
the tool. This patch adds a dedicated entry to MAINTAINERS.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220608121428.69708-1-quentin@isovalent.com

xdpxceiver run on a AF_XDP ZC enabled driver revealed a problem with XSK
Tx batching API. There is a test that checks how invalid Tx descriptors
are handled by AF_XDP. Each valid descriptor is followed by invalid one
on Tx side whereas the Rx side expects only to receive a set of valid
descriptors.

In current xsk_tx_peek_release_desc_batch() function, the amount of
available descriptors is hidden inside xskq_cons_peek_desc_batch(). This
can be problematic in cases where invalid descriptors are present due to
the fact that xskq_cons_peek_desc_batch() returns only a count of valid
descriptors. This means that it is impossible to properly update XSK
ring state when calling xskq_cons_release_n().

To address this issue, pull out the contents of
xskq_cons_peek_desc_batch() so that callers (currently only
xsk_tx_peek_release_desc_batch()) will always be able to update the
state of ring properly, as total count of entries is now available and
use this value as an argument in xskq_cons_release_n(). By
doing so, xskq_cons_peek_desc_batch() can be dropped altogether.

Fixes: 9349eb3a ("xsk: Introduce batched Tx descriptor interfaces")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220607142200.576735-1-maciej.fijalkowski@intel.com