Skip to content

L
linux
Switch branch/tag
  1. 19 May, 2022 27 commits
  3. 18 May, 2022 13 commits
    • Linus Torvalds's avatar
      Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost · db1fd3fc
      Linus Torvalds authored 
      Pull mlx5 fix from Michael Tsirkin:
 "One last minute fixup

  The patch has been on list for a while but as it was posted as part of
  a thread it was missed"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vdpa/mlx5: Use consistent RQT size
      db1fd3fc
    • Al Viro's avatar
      Fix double fget() in vhost_net_set_backend() · fb4554c2
      Al Viro authored 
      Descriptor table is a shared resource; two fget() on the same descriptor
may return different struct file references.  get_tap_ptr_ring() is
called after we'd found (and pinned) the socket we'll be using and it
tries to find the private tun/tap data structures associated with it.
Redoing the lookup by the same file descriptor we'd used to get the
socket is racy - we need to same struct file.

Thanks to Jason for spotting a braino in the original variant of patch -
I'd missed the use of fd == -1 for disabling backend, and in that case
we can end up with sock == NULL and sock != oldsock.

Cc: stable@kernel.org
Acked-by: default avatarMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: default avatarJason Wang <jasowang@redhat.com>
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      fb4554c2
    • Eli Cohen's avatar
      vdpa/mlx5: Use consistent RQT size · acde3929
      Eli Cohen authored 
      The current code evaluates RQT size based on the configured number of
virtqueues. This can raise an issue in the following scenario:

Assume MQ was negotiated.
1. mlx5_vdpa_set_map() gets called.
2. handle_ctrl_mq() is called setting cur_num_vqs to some value, lower
   than the configured max VQs.
3. A second set_map gets called, but now a smaller number of VQs is used
   to evaluate the size of the RQT.
4. handle_ctrl_mq() is called with a value larger than what the RQT can
   hold. This will emit errors and the driver state is compromised.

To fix this, we use a new field in struct mlx5_vdpa_net to hold the
required number of entries in the RQT. This value is evaluated in
mlx5_vdpa_set_driver_features() where we have the negotiated features
all set up.

In addition to that, we take into consideration the max capability of RQT
entries early when the device is added so we don't need to take consider
it when creating the RQT.

Last, we remove the use of mlx5_vdpa_max_qps() which just returns the
max_vas / 2 and make the code clearer.

Fixes: 52893733 ("vdpa/mlx5: Add multiqueue support")
Acked-by: default avatarJason Wang <jasowang@redhat.com>
Signed-off-by: default avatarEli Cohen <elic@nvidia.com>
Signed-off-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      acde3929
    • Linus Torvalds's avatar
      Merge tag 'sound-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound · ef130216
      Linus Torvalds authored 
      Pull sound fixes from Takashi Iwai:
 "A collection of last-minute HD- an USB-audio quirks in addition to a
  fix for the legacy ISA wavefront driver.

  All look small and easy"

* tag 'sound-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Restore Rane SL-1 quirk
  ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machine
  ALSA: hda/realtek: Add quirk for TongFang devices with pop noise
  ALSA: hda/realtek: Add quirk for the Framework Laptop
  ALSA: wavefront: Proper check of get_user() error
  ALSA: hda/realtek: Add quirk for Dell Latitude 7520
  ALSA: hda - fix unused Realtek function when PM is not enabled
  ALSA: usb-audio: Don't get sample rate for MCT Trigger 5 USB-to-HDMI
      ef130216
    • Pablo Neira Ayuso's avatar
      netfilter: nf_tables: disable expression reduction infra · 9e539c5b
      Pablo Neira Ayuso authored 
      Either userspace or kernelspace need to pre-fetch keys inconditionally
before comparisons for this to work. Otherwise, register tracking data
is misleading and it might result in reducing expressions which are not
yet registers.

First expression is also guaranteed to be evaluated always, however,
certain expressions break before writing data to registers, before
comparing the data, leaving the register in undetermined state.

This patch disables this infrastructure by now.

Fixes: b2d30654 ("netfilter: nf_tables: do not reduce read-only expressions")
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      9e539c5b
    • Ritaro Takenaka's avatar
      netfilter: flowtable: move dst_check to packet path · 2738d9d9
      Ritaro Takenaka authored 
      Fixes sporadic IPv6 packet loss when flow offloading is enabled.

IPv6 route GC and flowtable GC are not synchronized.
When dst_cache becomes stale and a packet passes through the flow before
the flowtable GC teardowns it, the packet can be dropped.
So, it is necessary to check dst every time in packet path.

Fixes: 227e1e4d ("netfilter: nf_flowtable: skip device lookup from interface index")
Signed-off-by: default avatarRitaro Takenaka <ritarot634@gmail.com>
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      2738d9d9
    • Pablo Neira Ayuso's avatar
      netfilter: flowtable: fix TCP flow teardown · e5eaac2b
      Pablo Neira Ayuso authored 
      This patch addresses three possible problems:

1. ct gc may race to undo the timeout adjustment of the packet path, leaving
   the conntrack entry in place with the internal offload timeout (one day).

2. ct gc removes the ct because the IPS_OFFLOAD_BIT is not set and the CLOSE
   timeout is reached before the flow offload del.

3. tcp ct is always set to ESTABLISHED with a very long timeout
   in flow offload teardown/delete even though the state might be already
   CLOSED. Also as a remark we cannot assume that the FIN or RST packet
   is hitting flow table teardown as the packet might get bumped to the
   slow path in nftables.

This patch resets IPS_OFFLOAD_BIT from flow_offload_teardown(), so
conntrack handles the tcp rst/fin packet which triggers the CLOSE/FIN
state transition.

Moreover, teturn the connection's ownership to conntrack upon teardown
by clearing the offload flag and fixing the established timeout value.
The flow table GC thread will asynchonrnously free the flow table and
hardware offload entries.

Before this patch, the IPS_OFFLOAD_BIT remained set for expired flows on
which is also misleading since the flow is back to classic conntrack
path.

If nf_ct_delete() removes the entry from the conntrack table, then it
calls nf_ct_put() which decrements the refcnt. This is not a problem
because the flowtable holds a reference to the conntrack object from
flow_offload_alloc() path which is released via flow_offload_free().

This patch also updates nft_flow_offload to skip packets in SYN_RECV
state. Since we might miss or bump packets to slow path, we do not know
what will happen there while we are still in SYN_RECV, this patch
postpones offload up to the next packet which also aligns to the
existing behaviour in tc-ct.

flow_offload_teardown() does not reset the existing tcp state from
flow_offload_fixup_tcp() to ESTABLISHED anymore, packets bump to slow
path might have already update the state to CLOSE/FIN.

Joint work with Oz and Sven.

Fixes: 1e5b2471 ("netfilter: nf_flow_table: teardown flow timeout race")
Signed-off-by: default avatarOz Shlomo <ozsh@nvidia.com>
Signed-off-by: default avatarSven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      e5eaac2b
    • Geert Uytterhoeven's avatar
      net: smc911x: Fix min() use in debug code · a3641ca4
      Geert Uytterhoeven authored 
      If ENABLE_SMC_DEBUG_PKTS=1:

    drivers/net/ethernet/smsc/smc911x.c: In function ‘smc911x_hardware_send_pkt’:
    include/linux/minmax.h:20:28: error: comparison of distinct pointer types lacks a cast [-Werror]
       20 |  (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
	  |                            ^~
    drivers/net/ethernet/smsc/smc911x.c:483:17: note: in expansion of macro ‘min’
      483 |  PRINT_PKT(buf, min(len, 64));

Fix this by making the constant unsigned, to match the type of "len".
While at it, replace the other missed ternary operator by min(), too.

Convert the dummy PRINT_PKT() from a macro to a static inline function,
to catch mistakes like this without having to enable debug options
manually.

Fixes: 5ff0348b ("net: smc911x: replace ternary operator with min()")
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a3641ca4
    • Yang Yingliang's avatar
      net: ethernet: sunplus: add missing of_node_put() in spl2sw_mdio_init() · 223153ea
      Yang Yingliang authored 
      of_get_child_by_name() returns device node pointer with refcount
incremented. The refcount should be decremented before returning
from spl2sw_mdio_init().

Fixes: fd3040b9 ("net: ethernet: Add driver for Sunplus SP7021")
Reported-by: default avatarHulk Robot <hulkci@huawei.com>
Signed-off-by: default avatarYang Yingliang <yangyingliang@huawei.com>
Reviewed-by: default avatarWells Lu <wellslutw@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      223153ea
    • Danielle Ratson's avatar
      selftests: netdevsim: Increase sleep time in hw_stats_l3.sh test · 7ba106fc
      Danielle Ratson authored 
      hw_stats_l3.sh test is failing often for l3 stats shows less than 20
packets after 2 seconds sleep.

This is happening since there is a race between the 2 seconds sleep and
the netdevsim actually delivering the packets.

Increase the sleep time so the packets will be delivered successfully on
time.
Signed-off-by: default avatarDanielle Ratson <danieller@nvidia.com>
Reviewed-by: default avatarPetr Machata <petrm@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7ba106fc
    • Martin Liška's avatar
      eth: sun: cassini: remove dead code · 32329216
      Martin Liška authored 
      Fixes the following GCC warning:

drivers/net/ethernet/sun/cassini.c:1316:29: error: comparison between two arrays [-Werror=array-compare]
drivers/net/ethernet/sun/cassini.c:3783:34: error: comparison between two arrays [-Werror=array-compare]

Note that 2 arrays should be compared by comparing of their addresses:
note: use ‘&cas_prog_workaroundtab[0] == &cas_prog_null[0]’ to compare the addresses
Signed-off-by: default avatarMartin Liska <mliska@suse.cz>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      32329216
    • Joel Stanley's avatar
      net: ftgmac100: Disable hardware checksum on AST2600 · 6fd45e79
      Joel Stanley authored 
      The AST2600 when using the i210 NIC over NC-SI has been observed to
produce incorrect checksum results with specific MTU values. This was
first observed when sending data across a long distance set of networks.

On a local network, the following test was performed using a 1MB file of
random data.

On the receiver run this script:

 #!/bin/bash
 while [ 1 ]; do
        # Zero the stats
        nstat -r  > /dev/null
        nc -l 9899 > test-file
        # Check for checksum errors
        TcpInCsumErrors=$(nstat | grep TcpInCsumErrors)
        if [ -z "$TcpInCsumErrors" ]; then
                echo No TcpInCsumErrors
        else
                echo TcpInCsumErrors = $TcpInCsumErrors
        fi
 done

On an AST2600 system:

 # nc <IP of  receiver host> 9899 < test-file

The test was repeated with various MTU values:

 # ip link set mtu 1410 dev eth0

The observed results:

 1500 - good
 1434 - bad
 1400 - good
 1410 - bad
 1420 - good

The test was repeated after disabling tx checksumming:

 # ethtool -K eth0 tx-checksumming off

And all MTU values tested resulted in transfers without error.

An issue with the driver cannot be ruled out, however there has been no
bug discovered so far.

David has done the work to take the original bug report of slow data
transfer between long distance connections and triaged it down to this
test case.

The vendor suspects this this is a hardware issue when using NC-SI. The
fixes line refers to the patch that introduced AST2600 support.
Reported-by: default avatarDavid Wilder <wilder@us.ibm.com>
Reviewed-by: default avatarDylan Hung <dylan_hung@aspeedtech.com>
Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6fd45e79
    • Kevin Mitchell's avatar
      igb: skip phy status check where unavailable · 942d2ad5
      Kevin Mitchell authored 
      igb_read_phy_reg() will silently return, leaving phy_data untouched, if
hw->ops.read_reg isn't set. Depending on the uninitialized value of
phy_data, this led to the phy status check either succeeding immediately
or looping continuously for 2 seconds before emitting a noisy err-level
timeout. This message went out to the console even though there was no
actual problem.

Instead, first check if there is read_reg function pointer. If not,
proceed without trying to check the phy status register.

Fixes: b72f3f72 ("igb: When GbE link up, wait for Remote receiver status condition")
Signed-off-by: default avatarKevin Mitchell <kevmitch@arista.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      942d2ad5
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7