perform mode2 reset for sdma fed error on gfx v11_0_3.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix below checkpatch insisted error & warnings:

ERROR: space required before the open brace '{'
WARNING: braces {} are not necessary for any arm of this statement
+       if ((type == VCN_ENCODE_RING) && (vcn_config & VCN_BLOCK_ENCODE_DISABLE_MASK)) {
[...]
+       } else if ((type == VCN_DECODE_RING) && (vcn_config & VCN_BLOCK_DECODE_DISABLE_MASK)) {
[...]
+       } else if ((type == VCN_UNIFIED_RING) && (vcn_config & VCN_BLOCK_QUEUE_DISABLE_MASK)) {
[...]
ERROR: code indent should use tabs where possible
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: braces {} are not necessary for single statement blocks
+               for (i = 0; i < adev->vcn.num_enc_rings; ++i) {
+                       fence[j] += amdgpu_fence_count_emitted(&adev->vcn.inst[j].ring_enc[i]);
+
ERROR: space required before the open parenthesis '('
WARNING: Missing a blank line after declarations
WARNING: please, no spaces at the start of a line
WARNING: Symbolic permissions 'S_IRUGO' are not preferred. Consider using octal permissions '0444'.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix below checkpatch warnings:

WARNING: Missing a blank line after declarations
+                       struct amdgpu_connector *amdgpu_connector = to_amdgpu_connector(connector);
+                       amdgpu_encoder->active_device = amdgpu_encoder->devices & amdgpu_connector->devices;

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Allocate large local variable on heap to avoid exceeding the
stack size:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c: In function ‘svm_range_validate_and_map’:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:1690:1: warning: the frame size of 2360 bytes is larger than 2048 bytes [-Wframe-larger-than=]
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix below checkpatch insisted error & warnings:

ERROR: Macros with complex values should be enclosed in parentheses
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: braces {} are not necessary for single statement blocks
WARNING: Block comments use a trailing */ on a separate line
WARNING: Missing a blank line after declarations

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

sq.is_enabled is a byte so there is no need to endian swap it.
Acked-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Rework logic or use do_div() to avoid problems on 32 bit.

v2: add a missing case for XCP macro
v3: fix out of bounds array access
v4: fix xcp handling harder

Acked-by: Guchun Chen <guchun.chen@amd.com> (v1)
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com> (v3)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Register GFX RAS functions and initialize GFX RAS.

v2: remove xcp operations.
v3: reuse the return value of gfx_ras_sw_init.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Query and reset sq timeout status.

v2: change instance from 0 to xcc_id for register access.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add GFX RAS error count reset function.

v2: remove xcp operation.
    only select_se_sh when instance number is more than 1.
v3: add check for se_num before select_se_sh.
    change instance from 0 to xcc_id for register access.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Query GFX RAS ce/ue count.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Prepare for the query of GFX RAS ce/ue count.

v2: remove xcp operation.
    only select_se_sh when instance number is more than 1.
v3: add more CE/UE registsers to query list.
    add check for se_num before select_se_sh.
    change instance from 0 to xcc_id for register access.
v4: move gfx memory id definitions to gfx_v9_4_3.
v5: create a dedicated patch for adding error count query function.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add common GFX RAS definitions.

v2: remove instance from amdgpu_gfx_ras_reg_entry,
    amdgpu_ras_err_status_reg_entry has already defined it.
v3: remove memory id definitions from amdgpu_gfx.h, they are
    related to IP version.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

GC v9_4_3 introduces UE|CE_ERR_STATUS_LO|HI to log
hardware errors
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Reset GFX RAS status registers.

v2: fix typo in title.
    remove xcp operation.
v3: change instance from 0 to xcc_id for register access.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Query GFX RAS status.

v2: remove xcp operation.
v3: change instance from 0 to xcc_id for register access.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The common function can help reduce redundant code.

v2: remove xcp operation, only need to do RAS operations for all
instances.
v3: remove check for GFX RAS support, will be checked in higher level.
    add amdgpu prefix for the function name.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Not all the asic needs xcp. ensure check xcp availabity
before accessing its member.

v2: add missing change in kfd_topology.c
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Avoid access null xcp_mgr pointer.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The mask is only needed to be set when RAS block instance number is
more than 1 and invalid bits should be also masked out.
We only check valid bits for GFX and SDMA block for now, and will
add check for other RAS blocks in the future.

v2: move the check under injection operation since the mask is only
    used by RAS error inject.
v3: add valid bits handling for SDMA.
v4: print message if the mask is adjusted.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

No special requirement in RAS injection for the two versions, switch to
use default injection interface.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

So GFX RAS injection could use default function if it doesn't define its
own injection interface.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

User can specify injected instances by the mask. For backward
compatibility, the mask value is incorporated into sub block index
without interface change of RAS TA.
User uses logical mask and driver should convert it to physical value
before sending it to RAS TA.

v2: update parameter name.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Convert instance mask for the convenience of RAS TA.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch enables IH CAM on GFX9.4.3 ASIC.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Current calculation only works for NPS4/QPX mode, correct it for
NPS4/CPX mode.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Rename smv_migrate_init to a better name kgd2kfd_init_zone_device
because it setup zone devive pgmap for page migration and keep it in
kfd_migrate.c to access static functions svm_migrate_pgmap_ops. Call it
only once in amdgpu_device_ip_init after adev ip blocks are initialized,
but before amdgpu_amdkfd_device_init initialize kfd nodes which enable
SVM support based on pgmap.

svm_range_set_max_pages is called by kgd2kfd_device_init everytime after
switching compute partition mode.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

During XCP init, unlike the primary device, there is no amdgpu_device
attached to each XCP's drm_device

In case that user trying to open/close the primary node of XCP drm_device
this rerouting is to solve the NULL pointer issue causing by referring
to any member of the amdgpu_device

 BUG: unable to handle page fault for address: 0000000000020c80
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0002) - not-present page
 Oops: 0002 [#1] PREEMPT SMP NOPTI
 Call Trace:
  <TASK>
  lock_timer_base+0x6b/0x90
  try_to_del_timer_sync+0x2b/0x80
  del_timer_sync+0x29/0x40
  flush_delayed_work+0x1c/0x50
  amdgpu_driver_open_kms+0x2c/0x280 [amdgpu]
  drm_file_alloc+0x1b3/0x260 [drm]
  drm_open+0xaa/0x280 [drm]
  drm_stub_open+0xa2/0x120 [drm]
  chrdev_open+0xa6/0x1c0
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

svm_migrate_init set the max svm range pages based on the KFD nodes
partition size. APU mode don't init pgmap because there is no migration.

kgd2kfd_device_init calls svm_migrate_init after KFD nodes allocation
and initialization.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch fixes memory reporting on the GFX 9.4.3 APU and dGPU
by reporting available memory on a per partition basis. If its an
APU, available and used memory calculations take into account
system and TTM memory.

v2: squash in fix ("drm/amdkfd: Fix array out of bound warning")
    squash in fix ("drm/amdgpu: Update memory reporting for GFX9.4.3")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We need to track memory usage on a per partition basis. To do
that, store the local memory information in KFD node instead
of kfd device.

v2: squash in fix ("amdkfd: Use mem_id to access mem_partition info")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Find xcp_id from amdgpu_fpriv, use it for amdgpu_gem_object_create.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

kfd_ioctl_get_dmabuf use the amdgpu bo xcp_id to get the gpu_id of the
KFD node from the exported dmabuf_adev, and then create kfd bo on the
correct adev and KFD node when importing the amdgpu bo to KFD.

Remove function kfd_device_by_adev, it is not needed as it is the same
result as dmabuf_adev->kfd.dev->nodes[0]->id.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For memory accounting per compute partition and export drm amdgpu bo and
then import to KFD, we need the xcp id to account the memory usage or
find the KFD node of the original amdgpu bo to create the KFD bo on the
correct adev KFD node.

Set xcp_id_plus1 of amdgpu_bo_param to create bo and store xcp_id to
amddgpu bo. Add helper macro to get the mem_id from adev and xcp_id.

v2: squash in fix ("drm/amdgpu: Fix BO creation failure on GFX 9.4.3 dGPU")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

TTM place lpfn is exclusive used as end (start + size) in drm and buddy
allocator, adev->gmc memory partition range lpfn is inclusive (start +
size - 1), should plus 1 to set TTM place lpfn.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Alloc kernel mode page table bo uses the amdgpu_vm->mem_id + 1 as bp
mem_id_plus1 parameter. For APU mode, select the correct TTM pool to
alloc page from the corresponding memory partition, this will be the
closest NUMA node. For dGPU mode, select the correct address range for
vram manager.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use MTYPE RW/MTYPE_CC for mapping system memory or VRAM to KFD node
within the same memory partition, use MTYPE_NC for mapping on KFD node
from the far memory partition of the same socket or from another socket
on same XGMI hive.

On NPS4 or 4P system, MTYPE will be overridden per page depending on
the memory NUMA node id and vm->mem_id.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

dGPU mode uses VRAM manager to validate bo, amdgpu bo placement use the
mem_id  to get the allocation range first, last page frame number
from xcp manager, pass to drm buddy allocator as the allowed range.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pass kfd node->xcp->mem_id to amdgpu bo create parameter mem_id_plus1 to
allocate new svm_bo on the specified memory partition.

This is only for dGPU mode as we don't migrate with APU mode.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For dGPU mode VRAM allocation, create amdgpu_bo from amdgpu_vm->mem_id,
to alloc from the correct memory range.

For APU mode VRAM allocation, set alloc domain to GTT, and set
bp->mem_id_plus1 from amdgpu_vm->mem_id + 1 to create amdgpu_bo, to
allocate system memory from correct NUMA node.

For GTT allocation, use mem_id -1 to allocate system memory from any
NUMA nodes.

Remove amdgpu_ttm_tt_set_mem_pool, to avoid the confusion that memory
maybe allocated from different mem_id.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>