1. 07 Dec, 2016 24 commits
  2. 06 Dec, 2016 16 commits
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc · bc3913a5
      Linus Torvalds authored
      Pull sparc fix from David Miller:
       "A use-before-NULL-check from Dan Carpenter"
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
        dbri: move dereference after check for NULL
      bc3913a5
    • Dan Carpenter's avatar
      dbri: move dereference after check for NULL · 163117e8
      Dan Carpenter authored
      We accidentally introduced a dereference before the NULL check in
      xmit_descs() as part of silencing a GCC warning.
      
      Fixes: 16f46050 ("dbri: Fix compiler warning")
      Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      163117e8
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · da1b466f
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) When dcbnl_cee_fill() fails to be able to push a new netlink
          attribute, it return 0 instead of an error code. From Pan Bian.
      
       2) Two suffix handling fixes to FIB trie code, from Alexander Duyck.
      
       3) bnxt_hwrm_stat_ctx_alloc() goes through all the trouble of setting
          and maintaining a return code 'rc' but fails to actually return it.
          Also from Pan Bian.
      
       4) ping socket ICMP handler needs to validate ICMP header length, from
          Kees Cook.
      
       5) caif_sktinit_module() has this interesting logic:
      
              int err = sock_register(...);
              if (!err)
                      return err;
              return 0;
      
          Just return sock_register()'s return value directly which is the
          only possible correct thing to do.
      
       6) Two bnx2x driver fixes from Yuval Mintz, return a reasonable
          estimate from get_ringparam() ethtool op when interface is down and
          avoid trying to use UDP port based tunneling on 577xx chips.
      
       7) Fix ep93xx_eth crash on module unload from Florian Fainelli.
      
       8) Missing uapi exports, from Stephen Hemminger.
      
       9) Don't schedule work from sk_destruct(), because the socket will be
          freed upon return from that function. From Herbert Xu.
      
      10) Buggy drivers, of which we know there is at least one, can send a
          huge packet into the TCP stack but forget to set the gso_size in the
          SKB, which causes all kinds of problems.
      
          Correct this when it happens, and emit a one-time warning with the
          device name included so that it can be diagnosed more easily.
      
          From Marcelo Ricardo Leitner.
      
      11) virtio-net does DMA off the stack causes hiccups with VMAP_STACK,
          fix from Andy Lutomirski.
      
      12) Fix fec driver compilation with CONFIG_M5272, from Nikita
          Yushchenko.
      
      13) mlx5 fixes from Kamal Heib, Saeed Mahameed, and Mohamad Haj Yahia.
          (erroneously flushing queues on error, module parameter validation,
          etc)
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits)
        net/mlx5e: Change the SQ/RQ operational state to positive logic
        net/mlx5e: Don't flush SQ on error
        net/mlx5e: Don't notify HW when filling the edge of ICO SQ
        net/mlx5: Fix query ISSI flow
        net/mlx5: Remove duplicate pci dev name print
        net/mlx5: Verify module parameters
        net: fec: fix compile with CONFIG_M5272
        be2net: Add DEVSEC privilege to SET_HSW_CONFIG command.
        virtio-net: Fix DMA-from-the-stack in virtnet_set_mac_address()
        tcp: warn on bogus MSS and try to amend it
        uapi glibc compat: fix outer guard of net device flags enum
        net: stmmac: clear reset value of snps, wr_osr_lmt/snps, rd_osr_lmt before writing
        netlink: Do not schedule work from sk_destruct
        uapi: export nf_log.h
        uapi: export tc_skbmod.h
        net: ep93xx_eth: Do not crash unloading module
        bnx2x: Prevent tunnel config for 577xx
        bnx2x: Correct ringparam estimate when DOWN
        isdn: hisax: set error code on failure
        net: bnx2x: fix improper return value
        ...
      da1b466f
    • Linus Torvalds's avatar
      shmem: fix shm fallocate() list corruption · 10d20bd2
      Linus Torvalds authored
      The shmem hole punching with fallocate(FALLOC_FL_PUNCH_HOLE) does not
      want to race with generating new pages by faulting them in.
      
      However, the wait-queue used to delay the page faulting has a serious
      problem: the wait queue head (in shmem_fallocate()) is allocated on the
      stack, and the code expects that "wake_up_all()" will make sure that all
      the queue entries are gone before the stack frame is de-allocated.
      
      And that is not at all necessarily the case.
      
      Yes, a normal wake-up sequence will remove the wait-queue entry that
      caused the wakeup (see "autoremove_wake_function()"), but the key
      wording there is "that caused the wakeup".  When there are multiple
      possible wakeup sources, the wait queue entry may well stay around.
      
      And _particularly_ in a page fault path, we may be faulting in new pages
      from user space while we also have other things going on, and there may
      well be other pending wakeups.
      
      So despite the "wake_up_all()", it's not at all guaranteed that all list
      entries are removed from the wait queue head on the stack.
      
      Fix this by introducing a new wakeup function that removes the list
      entry unconditionally, even if the target process had already woken up
      for other reasons.  Use that "synchronous" function to set up the
      waiters in shmem_fault().
      
      This problem has never been seen in the wild afaik, but Dave Jones has
      reported it on and off while running trinity.  We thought we fixed the
      stack corruption with the blk-mq rq_list locking fix (commit
      7fe31130: "blk-mq: update hardware and software queues for sleeping
      alloc"), but it turns out there was _another_ stack corruptor hiding
      in the trinity runs.
      
      Vegard Nossum (also running trinity) was able to trigger this one fairly
      consistently, and made us look once again at the shmem code due to the
      faults often being in that area.
      
      Reported-and-tested-by: Vegard Nossum <vegard.nossum@oracle.com>.
      Reported-by: default avatarDave Jones <davej@codemonkey.org.uk>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      10d20bd2
    • David S. Miller's avatar
      Merge branch 'mlx5-fixes' · 32f16e14
      David S. Miller authored
      Saeed Mahameed says:
      
      ====================
      Mellanox 100G mlx5 fixes 2016-12-04
      
      Some bug fixes for mlx5 core and mlx5e driver.
      
      v1->v2:
       - replace "uint" with "unsigned int"
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      32f16e14
    • Mohamad Haj Yahia's avatar
      net/mlx5e: Change the SQ/RQ operational state to positive logic · c0f1147d
      Mohamad Haj Yahia authored
      When using the negative logic (i.e. FLUSH state), after the RQ/SQ reopen
      we will have a time interval that the RQ/SQ is not really ready and the
      state indicates that its not in FLUSH state because the initial SQ/RQ struct
      memory starts as zeros.
      Now we changed the state to indicate if the SQ/RQ is opened and we will
      set the READY state after finishing preparing all the SQ/RQ resources.
      
      Fixes: 6e8dd6d6 ("net/mlx5e: Don't wait for SQ completions on close")
      Fixes: f2fde18c ("net/mlx5e: Don't wait for RQ completions on close")
      Signed-off-by: default avatarMohamad Haj Yahia <mohamad@mellanox.com>
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c0f1147d
    • Saeed Mahameed's avatar
      net/mlx5e: Don't flush SQ on error · 3c8591d5
      Saeed Mahameed authored
      We are doing SQ descriptors cleanup in driver.
      
      Fixes: 6e8dd6d6 ("net/mlx5e: Don't wait for SQ completions on close")
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3c8591d5
    • Saeed Mahameed's avatar
      net/mlx5e: Don't notify HW when filling the edge of ICO SQ · b8335d91
      Saeed Mahameed authored
      We are going to do this a couple of steps ahead anyway.
      
      Fixes: d3c9bc27 ("net/mlx5e: Added ICO SQs")
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b8335d91
    • Kamal Heib's avatar
      net/mlx5: Fix query ISSI flow · f9c14e46
      Kamal Heib authored
      In old FWs query ISSI command is not supported and for some of those FWs
      it might fail with status other than "MLX5_CMD_STAT_BAD_OP_ERR".
      
      In such case instead of failing the driver load, we will treat any FW
      status other than 0 for Query ISSI FW command as ISSI not supported and
      assume ISSI=0 (most basic driver/FW interface).
      
      In case of driver syndrom (query ISSI failure by driver) we will fail
      driver load.
      
      Fixes: f62b8bb8 ('net/mlx5: Extend mlx5_core to support ConnectX-4
      Ethernet functionality')
      Signed-off-by: default avatarKamal Heib <kamalh@mellanox.com>
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f9c14e46
    • Kamal Heib's avatar
      net/mlx5: Remove duplicate pci dev name print · 9e5b2fc1
      Kamal Heib authored
      Remove duplicate pci dev name printing from mlx5_core_warn/dbg.
      
      Fixes: 5a788398 ('net/mlx5_core: Improve mlx5 messages')
      Signed-off-by: default avatarKamal Heib <kamalh@mellanox.com>
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9e5b2fc1
    • Kamal Heib's avatar
      net/mlx5: Verify module parameters · f663ad98
      Kamal Heib authored
      Verify the mlx5_core module parameters by making sure that they are in
      the expected range and if they aren't restore them to their default
      values.
      
      Fixes: 9603b61d ('mlx5: Move pci device handling from mlx5_ib to mlx5_core')
      Signed-off-by: default avatarKamal Heib <kamalh@mellanox.com>
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f663ad98
    • Salil's avatar
      net: hns: Fix to conditionally convey RX checksum flag to stack · 862b3d20
      Salil authored
      This patch introduces the RX checksum function to check the
      status of the hardware calculated checksum and its error and
      appropriately convey status to the upper stack in skb->ip_summed
      field.
      
      In hardware, we only support checksum for the following
      protocols:
      1) IPv4,
      2) TCP(over IPv4 or IPv6),
      3) UDP(over IPv4 or IPv6),
      4) SCTP(over IPv4 or IPv6)
      but we support many L3(IPv4, IPv6, MPLS, PPPoE etc) and
      L4(TCP, UDP, GRE, SCTP, IGMP, ICMP etc.) protocols.
      
      Hardware limitation:
      Our present hardware RX Descriptor lacks L3/L4 checksum
      "Status & Error" bit (which usually can be used to indicate whether
      checksum was calculated by the hardware and if there was any error
      encountered during checksum calculation).
      
      Software workaround:
      We do get info within the RX descriptor about the kind of
      L3/L4 protocol coming in the packet and the error status. These
      errors might not just be checksum errors but could be related to
      version, length of IPv4, UDP, TCP etc.
      Because there is no-way of knowing if it is a L3/L4 error due
      to bad checksum or any other L3/L4 error, we will not (cannot)
      convey hardware checksum status(CHECKSUM_UNNECESSARY) for such
      cases to upper stack and will not maintain the RX L3/L4 checksum
      counters as well.
      Signed-off-by: default avatarSalil Mehta <salil.mehta@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      862b3d20
    • Nikita Yushchenko's avatar
      net: fec: fix compile with CONFIG_M5272 · f85de666
      Nikita Yushchenko authored
      Commit 80cca775 ("net: fec: cache statistics while device is down")
      introduced unconditional statistics-related actions.
      
      However, when driver is compiled with CONFIG_M5272, staticsics-related
      definitions do not exist, which results into build errors.
      
      Fix that by adding explicit handling of !defined(CONFIG_M5272) case.
      
      Fixes: 80cca775 ("net: fec: cache statistics while device is down")
      Signed-off-by: default avatarNikita Yushchenko <nikita.yoush@cogentembedded.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f85de666
    • Venkat Duvvuru's avatar
      be2net: Add DEVSEC privilege to SET_HSW_CONFIG command. · d14584d9
      Venkat Duvvuru authored
      OPCODE_COMMON_GET_FN_PRIVILEGES is returning only DEVSEC
      privilege (Unrestricted Administrative Privilege) for Lancer NIC functions.
      So, driver is failing SET_HSW_CONFIG command, as DEVSEC privilege was not
      set in the privilege bitmap. This patch fixes the problem by setting DEVSEC
      privilege in SET_HSW_CONFIG’s privilege bitmap.
      Signed-off-by: default avatarVenkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
      Signed-off-by: default avatarSuresh Reddy <suresh.reddy@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d14584d9
    • Andy Lutomirski's avatar
      virtio-net: Fix DMA-from-the-stack in virtnet_set_mac_address() · e37e2ff3
      Andy Lutomirski authored
      With CONFIG_VMAP_STACK=y, virtnet_set_mac_address() can be passed a
      pointer to the stack and it will OOPS.  Copy the address to the heap
      to prevent the crash.
      
      Cc: Michael S. Tsirkin <mst@redhat.com>
      Cc: Jason Wang <jasowang@redhat.com>
      Cc: Laura Abbott <labbott@redhat.com>
      Reported-by: zbyszek@in.waw.pl
      Signed-off-by: default avatarAndy Lutomirski <luto@kernel.org>
      Acked-by: default avatarJason Wang <jasowang@redhat.com>
      Acked-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e37e2ff3
    • Ivan Khoronzhuk's avatar
      net: ethernet: ti: cpsw: fix early budget split · 48e0a83e
      Ivan Khoronzhuk authored
      The budget split function requires the phy speed to be known.
      While ndo open a phy speed identification is postponed till the
      moment link is up. Hence, move it to appropriate callback, when link
      is up.
      Reported-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
      Fixes: 8feb0a19 ("net: ethernet: ti: cpsw: split tx budget according between channels")
      Signed-off-by: default avatarIvan Khoronzhuk <ivan.khoronzhuk@linaro.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      48e0a83e