Everyone should be using multitouch protocol B (slotted) now.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Consolidate use instructions and userspace API notes into the same chapter;
remove completely obsolete references, move into a separate subdirectory.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This is just a part of kernel documentation, it does not require explicit
license notice.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The heading level should be the same as for other devices.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The driver has been converted to use generic device properties, so
stop referring to platform data.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Move the documentation for Amiga CD32 together with other parallel port
joysticks.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The polled firmware update proved unreliable when testing on S7817. Use
attention to signal commands are complete.
Signed-off-by: Nick Dyer <nick@shmanahar.org>
Tested-by: Chris Healy <cphealy@gmail.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The data in F12_2D_Ctrl8 corresponds to the inactive border width used by
the RMI device. It is not in pixel units and should not be treated as a
clip value.
Signed-off-by: Nick Dyer <nick@shmanahar.org>
Tested-by: Chris Healy <cphealy@gmail.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

When IRQ handling was moved to rmi_driver in 3aeed5b5 the naming of the
interrupt changed from "rmi4_i2c" to "2-0020" (or similar). This patch
restores the previous behaviour and makes the interrupt easier to identify
in /proc/interrupts.
Signed-off-by: Nick Dyer <nick@shmanahar.org>
Tested-by: Chris Healy <cphealy@gmail.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

ar1021_i2c also supports the ar1020 device I'm using. This is tested.
They also share the same datasheet:

   http://ww1.microchip.com/downloads/en/DeviceDoc/40001393C.pdf

So let users see that they have a compatible in front of them by adding
AR1020 to the driver's description.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We should not be forcing edge triggered interrupt, but rather let platform
decide the kind of trigger it needs to use. Also, the driver is not quite
safe with regard to edge-triggered interrupts as it does not try to kick
the controller after requesting/enabling IRQ.
Reviewed-By: Christian Gmeiner <christian.gmeiner@gmail.com>
Tested-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The name field in structure i2c_device_id is 20 characters, and we expect
it to be NULL-terminated, however we are trying to stuff it with 21 bytes
and thus NULL-terminator is lost. This causes issues when one creates
device with name "MICROCHIP_AR1021_I2C" as i2c core cuts off the last "C",
and automatic module loading by alias does not work as result.

The -I2C suffix in the device name is superfluous, we know what bus we are
dealing with, so let's drop it. Also, no other driver uses capitals, and
the manufacturer name is normally not included, except in very rare cases
of incompatible name collisions.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116211
Fixes: dd4cae8b ("Input: Add Microchip AR1021 i2c touchscreen")
Reviewed-By: Christian Gmeiner <christian.gmeiner@gmail.com>
Tested-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Use the common kernel coding style and corrently align parameters with
open parenthesis.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

clk_prepare_enable() may fail, so we better check its return value and
propagate it in the case of error.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If imx6ul_tsc_init() fails we should not return directly.

We should disable the previously acquired clocks in this case.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

According to the previous error handling code, it is likely that 'goto
err_free_keymap' is expected here in order to avoid a memory leak in error
handling path.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

There are several quirky Xbox One pads that depend on initialization
packets that the Microsoft pads don't require. To deal with these,
I've added a mechanism for issuing device-specific initialization
packets using a VID/PID-based quirks list.

For the initial set of init quirks, I have added quirk handling from
Valve's Steam Link xpad driver[0] and the 360Controller project[1] for
macOS to enable some new pads to work properly.

This should enable full functionality on the following quirky pads:
0x0e6f:0x0165 - Titanfall 2 gamepad (previously fully non-functional)
0x0f0d:0x0067 - Hori Horipad (analog sticks previously non-functional)
0x24c6:0x541a - PowerA Xbox One pad (previously fully non-functional)
0x24c6:0x542a - PowerA Xbox One pad (previously fully non-functional)
0x24c6:0x543a - PowerA Xbox One pad (previously fully non-functional)

[0]: https://github.com/ValveSoftware/steamlink-sdk/blob/master/kernel/drivers/input/joystick/xpad.c
[1]: https://github.com/360Controller/360ControllerSigned-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

sparse says

 warning: incorrect type in assignment (different base types)
    expected unsigned short [unsigned] [usertype] offset
    got restricted __be16 [usertype] <noident>

for every usage of cpu_to_be16 in yealink.c. Defining it __be16 in the
first place shouldn't hurt.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Henk.Vergonet@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Use setup_timer() instead of init_timer() to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Use setup_timer() instead of init_timer() to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Use setup_timer() instead of init_timer() to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Use setup_timer() instead of init_timer() to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

When submitting the support for the ACPI0011 windows tablet keys device I
mapped the "windows" logo homekey to KEY_HOMEPAGE. But this is inconsistent
with how it is done on windows tablets using the old PNP0C40 ACPI device
and it does not match the HUT spec, which says that usage-page 7 usage 0xe3
is "Keyboard Left GUI".

This commit maps usage-page 7 usage 0xe3 to KEY_LEFTMETA fixing this.

Fixes: 4c3362f4 ("Input: soc_button_array - add support for ACPI 6.0...")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Now that the images got converted to svg, add them at the
ff.rst file.

NOTE: After merging upstream, the "figure" tag should be
replaced by the new "kernel-figure" tag, in order for the
SVG images to be included at the PDF files.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We're using svg as the standard format for vectorial images.

Convert it to .svg, in a way that it is easily editable.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We're using svg as the standard format for vectorial images.

Convert shape.fig to .svg, in a way that it is easily editable.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Now that all files under Documentation/input follows the ReST markup
language, rename them to *.rst and create a book for the Linux Input
subsystem.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This file has its own particular format that doesn't match any
markup one.

Manually change it to get something that would be readable
using ReST markup language.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This file require some adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>