- 05 Nov, 2017 17 commits
-
-
Jakub Kicinski authored
If TC program is loaded with skip_sw flag, we should allow the device-specific programs to be accepted. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Pass the netdev pointer to bpf_prog_get_type(). This way BPF code can decide whether the device matches what the code was loaded/translated for. Signed-off-by:
-
Jakub Kicinski authored
If program is bound to a device, print the name of the relevant interface or unknown if the netdev has since been removed. Signed-off-by:
-
Jakub Kicinski authored
Extend struct bpf_prog_info to contain information about program being bound to a device. Since the netdev may get destroyed while program still exists we need a flag to indicate the program is loaded for a device, even if the device is gone. Signed-off-by:
-
Jakub Kicinski authored
The fact that we don't know which device the program is going to be used on is quite limiting in current eBPF infrastructure. We have to reverse or limit the changes which kernel makes to the loaded bytecode if we want it to be offloaded to a networking device. We also have to invent new APIs for debugging and troubleshooting support. Make it possible to load programs for a specific netdev. This helps us to bring the debug information closer to the core eBPF infrastructure (e.g. we will be able to reuse the verifer log in device JIT). It allows device JITs to perform translation on the original bytecode. __bpf_prog_get() when called to get a reference for an attachment point will now refuse to give it if program has a device assigned. Following patches will add a version of that function which passes the expected netdev in. @type argument in __bpf_prog_get() is renamed to attach_type to make it clearer that it's only set on attachment. All calls to ndo_bpf are protected by rtnl, only verifier callbacks are not. We need a wait queue to make sure netdev doesn't get destroyed while verifier is still running and calling its driver. Signed-off-by:
-
Jakub Kicinski authored
ndo_xdp is a control path callback for setting up XDP in the driver. We can reuse it for other forms of communication between the eBPF stack and the drivers. Rename the callback and associated structures and definitions. Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the swap macro and remove unnecessary variables skb and cnt. This makes the code easier to read and maintain. This code was detected with the help of Coccinelle. Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 114893 Addresses-Coverity-ID: 114894 Addresses-Coverity-ID: 114895 Addresses-Coverity-ID: 114896 Addresses-Coverity-ID: 114897 Addresses-Coverity-ID: 114898 Addresses-Coverity-ID: 114899 Addresses-Coverity-ID: 114900 Addresses-Coverity-ID: 114901 Addresses-Coverity-ID: 114902 Addresses-Coverity-ID: 114903 Addresses-Coverity-ID: 114904 Addresses-Coverity-ID: 114905 Signed-off-by:
-
Eric Dumazet authored
tcp_init_nondata_skb() is fed with freshly allocated skbs. They already have a cleared csum field, no need to clear it again. This is based on Neal review on commit 3b117750 ("tcp: do not mangle skb->cb[] in tcp_make_synack()"), noticing I did not clear skb->csum. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Eric Dumazet authored
Reduce one indentation level to make code more readable. tcp_sync_mss() can be factorized. Signed-off-by:
-
Arnd Bergmann authored
We can now build this driver on ARM, so I ran into a randconfig build warning that presumably had existed on powerpc already. drivers/net/ethernet/freescale/dpaa/dpaa_eth.c: In function 'sg_fd_to_skb': drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:1712:18: error: 'skb' may be used uninitialized in this function [-Werror=maybe-uninitialized] I'm slightly changing the logic here, to make it obvious to the compiler that 'skb' is always initialized. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
David S. Miller authored
Flavio Leitner says: ==================== Allow openvswitch to query ports in another netns. Today Open vSwitch users are moving internal ports to other namespaces and although packets are flowing OK, the userspace daemon can't find out basic information like if the port is UP or DOWN, for instance. This patchset extends openvswitch API to retrieve the current netnsid of a port. It will be used by the userspace daemon to find out in which netns the port is located. This patchset also extends the rtnetlink getlink call to accept and operate on a given netnsid. More details are available in each patch. ==================== Signed-off-by: -
Jiri Benc authored
Currently, when an application gets netnsid from the kernel (for example as the result of RTM_GETLINK call on one end of the veth pair), it's not much useful. There's no reliable way to get to the netns fd from the netnsid, nor does any kernel API accept netnsid. Extend the RTM_GETLINK call to also accept netnsid. It will operate on the netns with the given netnsid in such case. Of course, the calling process needs to have enough capabilities in the target name space; for now, require CAP_NET_ADMIN. This can be relaxed in the future. To signal to the calling process that the kernel understood the new IFLA_IF_NETNSID attribute in the query, it will include it in the response. This is needed to detect older kernels, as they will just ignore IFLA_IF_NETNSID and query in the current name space. This patch implemetns IFLA_IF_NETNSID only for get and dump. For set operations, this can be extended later. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Jiri Benc authored
This patch allows reliable identification of netdevice interfaces connected to openvswitch bridges. In particular, user space queries the netdev interfaces belonging to the ports for statistics, up/down state, etc. Datapath dump needs to provide enough information for the user space to be able to do that. Currently, only interface names are returned. This is not sufficient, as openvswitch allows its ports to be in different name spaces and the interface name is valid only in its name space. What is needed and generally used in other netlink APIs, is the pair ifindex+netnsid. The solution is addition of the ifindex+netnsid pair (or only ifindex if in the same name space) to vport get/dump operation. On request side, ideally the ifindex+netnsid pair could be used to get/set/del the corresponding vport. This is not implemented by this patch and can be added later if needed. Signed-off-by:
-
Jiri Benc authored
It will be used by openvswitch. Signed-off-by:
-
Eric Dumazet authored
IN6_ADDR_HSIZE is private to addrconf.c, move it here to avoid confusion. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Eric Dumazet authored
pktgen accidentally used IN6_ADDR_HSIZE, instead of using the size of an IPv6 address. Since IN6_ADDR_HSIZE recently was increased from 16 to 256, this old bug is hitting us. Fixes: 3f27fb23 ("ipv6: addrconf: add per netns perturbation in inet6_addr_hash()") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 04 Nov, 2017 23 commits
-
-
Colin Ian King authored
Currently n->flags is being operated on by a logical && operator rather than a bitwise & operator. This looks incorrect as these should be bit flag operations. Fix this. Detected by CoverityScan, CID#1460398 ("Logical vs. bitwise operator") Fixes: 245dc512 ("net: sched: cls_u32: call block callbacks for offload") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Konstantin Khlebnikov authored
Average RTT is 32-bit thus full 64-bit division is redundant. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Suggested-by:
Stephen Hemminger <stephen@networkplumber.org> Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Vadim Fedorenko authored
Some time ago Eric Dumazet suggested a "hack the IFF_XMIT_DST_RELEASE flag on the vlan netdev". But the last comment was "does not support properly bonding/team.(If the real_dev->privflags IFF_XMIT_DST_RELEASE bit changes, we want to update all the vlans at the same time )" I've extended that patch to support changes of IFF_XMIT_DST_RELEASE in bonding/team. Both bonding and team call netdev_change_features() after recalculation of features including priv_flags IFF_XMIT_DST_RELEASE bit. So the only thing needed to support is to recheck this bit in vlan_transfer_features(). Suggested-by:
Vadim Fedorenko <vfedorenko@yandex-team.ru> Reviewed-by:
-
Wei Yongjun authored
Fixes the following sparse warnings: drivers/net/phy/phylink.c:570:6: warning: symbol 'phylink_phy_change' was not declared. Should it be static? Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2017-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.15 Mostly fixes this time, but also few new features. Major changes: wil6210 * remove ssid debugfs file rsi * add WOWLAN support for suspend, hibernate and shutdown states ath10k * add support for CCMP-256, GCMP and GCMP-256 ciphers on hardware where it's supported (QCA99x0 and QCA4019) ==================== Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: -
Vijaya Mohan Guvva authored
Return success if the same dispatch function is being registered for a given opcode and subcode, there by allow multiple switchdev enable and disables. Signed-off-by:
Vijaya Mohan Guvva <vijaya.guvva@cavium.com> Signed-off-by:
Satanand Burla <satananda.burla@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Handle changes in GRE configuration Petr says: Until now, when an IP tunnel was offloaded by the mlxsw driver, the offload was pretty much static, and changes in Linux configuration were not reflected in the hardware. That led to discrepancies between traffic flows in slow path and fast path. The work-around used to be to remove all routes that forward to the netdevice and re-add them. This is clearly suboptimal, but actually, as of the decap-only patchset, it's not even enough anymore, and one needs to go all the way and simply drop the tunnel and recreate it correctly. With this patchset, the NETDEV_CHANGE events that are generated for changes of up'd tunnel netdevices are captured and interpreted to correctly reconfigure the HW in accordance with changes requested at the software layer. In addition, NETDEV_CHANGEUPPER, NETDEV_UP and NETDEV_DOWN are now handled not only for tunnel devices themselves, but also for their bound devices. Each change is then translated to one or more of the following updates to the HW configuration: - refresh of offload of local route that corresponds to tunnel's local address - refresh of the loopback RIF - refresh of offloads of routes that forward to the changed tunnel - removal of tunnel offloads These tools are used to implement the following configuration changes: - addition of a new offloadable tunnel with local address that conflicts with that of an already-offloaded tunnel (the existing tunnel is onloaded, the new one isn't offloaded) - changes to TTL, TOS that make tunnel unsuitable for offloading - changes to ikey, okey, remote - changes to local, which when they cause conflict with another tunnel, lead to onloading of both newly-conflicting tunnels - migration of a bound device of an offloaded tunnel device to a different VRF - changes to what device is bound to a tunnel device (i.e. like what "ip tunnel change name g dev another" does) - changes to up / down state of a bound device. A down bound device doesn't forward encapsulated traffic anymore, but decap still works. This patchset starts with a suite of patches that adapt the existing code base step by step to facilitate introduction of the offloading code. The five substantial patches at the end then implement the changes mentioned above. ==================== Signed-off-by: -
Petr Machata authored
When the bound device of a tunnel device is down, encapsulated packets are not egressed anymore, but tunnel decap still works. Extend mlxsw_sp_nexthop_rif_update() to take IFF_UP into consideration when deciding whether a given next hop should be offloaded. Because the new logic was added to mlxsw_sp_nexthop_rif_update(), this fixes the case where a newly-added tunnel has a down bound device, which would previously be fully offloaded. Now the down state of the bound device is noted and next hops forwarding to such tunnel are not offloaded. In addition to that, notice NETDEV_UP and NETDEV_DOWN of a bound device to force refresh of tunnel encap route offloads. Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Petr Machata authored
When a bound device of an IP-in-IP tunnel changes, such as through 'ip tunnel change name $name dev $dev', the loopback backing the tunnel needs to be recreated. Signed-off-by:
-
Petr Machata authored
Changes to L3 tunnel netdevices (through `ip tunnel change' as well as `ip link set') lead to NETDEV_CHANGE being generated on the tunnel device. Because what is relevant for the tunnel in question depends on the tunnel type, handling of the event is dispatched to the IPIP module through a newly-added interface mlxsw_sp_ipip_ops.ol_netdev_change(). IPIP tunnels now remember the last set of tunnel parameters in struct mlxsw_sp_ipip_entry.parms, and use it to figure out what exactly has changed. Signed-off-by:
-
Petr Machata authored
When a bound device of a tunnel netdevice changes VRF, the loopback RIF that backs the tunnel needs to be updated and existing encapsulating routes need to be refreshed. Note that several tunnels can share the same bound device, in which case all the impacted tunnels need to be updated. Signed-off-by:
-
Petr Machata authored
The approach for offloading IP tunnels implemented currently by mlxsw doesn't allow two tunnels that have the same local IP address in the same (underlay) VRF. Previously, offloads were introduced on demand as encap routes were formed. When such a route was created that would cause offload of a conflicting tunnel, mlxsw_sp_ipip_entry_create() would detect it and return -EEXIST, which would propagate up and cause FIB abort. Now however IPIP entries are created as soon as an offloadable netdevice is created, and the failure prevents creation of such device. Furthermore, if the driver is installed at the point where such conflicting tunnels exist, the failure actually prevents successful modprobe. Furthermore, follow-up patches implement handling of NETDEV_CHANGE due to the local address change. However, NETDEV_CHANGE can't be vetoed. The failure merely means that the offloads weren't updated, but the change in Linux configuration is not rolled back. It is thus desirable to have a robust way of handling these conflicts, which can later be reused for handling NETDEV_CHANGE as well. To fix this, when a conflicting tunnel is created, instead of failing, simply pull the old tunnel to slow path and reject offloading the new one. Introduce two functions: mlxsw_sp_ipip_entry_demote_tunnel() and mlxsw_sp_ipip_demote_tunnel_by_saddr() to handle this. Make them both public, because they will be useful later on in this patchset. Signed-off-by:
-
Petr Machata authored
When trying to determine whether there are other offloaded tunnels with the same local address, mlxsw_sp_ipip_entry_create() should look for a tunnel with matching UL protocol, matching saddr, in the same VRF. However instead of taking into account the UL protocol of the tunnel netdevice (which mlxsw_sp_ipip_entry_saddr_matches() then compares to the UL protocol of inspected IPIP entry), it deduces the UL protocol from the inspected IPIP entry (and that's compared to itself). This is currently immaterial, because only one tunnel type is offloaded, and therefore the UL protocol always matches, but introducing support for a tunnel with IPv6 underlay would uncover this error. Signed-off-by:
-
Petr Machata authored
The work that needs to be done to update HW configuration in response to changes is similar to what __mlxsw_sp_ipip_entry_update_tunnel() already does, but with a number of twists: each change requires a different subset of things to happen. Extend the function to support all these uses, and allow finely-grained configuration of what should happen at each call through a suite of function arguments. Publish the updated function to allow use from the spectrum_ipip module. Signed-off-by:
-
Petr Machata authored
The work that's done by mlxsw_sp_netdevice_ipip_ol_vrf_event() is a good basis for a more versatile function that would take care of all sorts of tunnel updates requests: __mlxsw_sp_ipip_entry_update_tunnel(). Extract that function. Factor out a helper mlxsw_sp_ipip_entry_ol_lb_update() as well. Signed-off-by:
-
Petr Machata authored
The function mlxsw_sp_rif_create() takes an extack parameter. So far, for creation of loopback interfaces, NULL was passed. For some events however the extack can be extracted and passed along. So do that for NETDEV_CHANGEUPPER handler. Use the opportunity to update the type of info argument that mlxsw_sp_netdevice_ipip_ol_event() takes. Follow-up patches will introduce handling of more changes, and some of them carry an extack as well, but in an info structure of a different type. Though not strictly erroneous (the pointer could be cast whichever way), it makes no sense to pretend the value is always of a certain type, when in fact it isn't. So change the prototype of the above-mentioned function as well. Signed-off-by:
-
Petr Machata authored
The piece of logic to promote decap route, if any, is useful for generic tunnel updates, not just for handling of NETDEV_UP events on tunnel interfaces. Extract it to a separate function. Signed-off-by:
-
Petr Machata authored
This function only ever returns 0, so don't pretend it returns anything useful and just make it void. Signed-off-by:
-
Petr Machata authored
Signed-off-by:
-
Petr Machata authored
To implement NETDEV_CHANGE notifications on IP-in-IP tunnels, the handler needs to figure out what actually changed, to understand how exactly to update the offloads. It will do so by storing struct ip_tunnel_parm with previous configuration, and comparing that to the new version. To facilitate these comparisons, extract the code that operates on struct ip_tunnel_parm from the existing accessor functions, and make those a thin wrapper that extracts tunnel parameters and dispatches. Signed-off-by:
-
Petr Machata authored
These functions ideologically belong to the IPIP module, and some follow-up work will benefit from their presence there. Signed-off-by:
-
Petr Machata authored
Some of the code down the road needs this logic as well. Signed-off-by:
-
