- 17 Oct, 2017 1 commit
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Quick 4.15 misc pull for the build fix: Cross-subsystem Changes: - piles an piles of misc/trivial patches all over, some more from outreachy applicants Core Changes: - build fix for the bridge/of cleanup (Maarten) - fix vblank count in arm_vblank_event (Ville) - some kerneldoc typo fixes from Thierry Driver Changes: - vc4: Fix T-format tiling scanout, cleanup clock divider w/a (Anholt) - sun4i: small cleanups and improved code comments all over (Chen-Yu Tsai) * tag 'drm-misc-next-2017-10-16' of git://anongit.freedesktop.org/drm/drm-misc: (21 commits) drm/via: use ARRAY_SIZE drm/gma500: use ARRAY_SIZE drm/sun4i: hdmi: Move PAD_CTRL1 setting to mode_set function drm/sun4i: hdmi: Document PAD_CTRL1 output invert bits drm/sun4i: backend: Add comment explaining why registers are cleared drm/sun4i: backend: Use drm_fb_cma_get_gem_addr() to get display memory drm/sun4i: backend: Create regmap after access is possible drm/sun4i: don't add components that are already in the queue drm/vc4: Fix pitch setup for T-format scanout. drm/vc4: Move the DSI clock divider workaround closer to the clock call. drm: Replace kzalloc with kcalloc drm/tinydrm: Remove explicit .best_encoder assignment drm/tinydrm: Replace dev_error with DRM_DEV_ERROR drm/drm_of: Move drm_of_panel_bridge_remove_function into header. drm/atomic-helper: Fix reference to drm_crtc_send_vblank_event() drm/atomic-helper: Fix typo drm: Add missing __user annotation to drm_syncobj_array_find() drm/rockchip: add PINCTRL dependency for LVDS drm/kirin: Checking for IS_ERR() instead of NULL driver:gpu: return -ENOMEM on allocation failure. ...
-
- 16 Oct, 2017 8 commits
-
-
Jérémy Lefaure authored
Using the ARRAY_SIZE macro improves the readability of the code. Found with Coccinelle with the following semantic patch: @r depends on (org || report)@ type T; T[] E; position p; @@ ( (sizeof(E)@p /sizeof(*E)) | (sizeof(E)@p /sizeof(E[...])) | (sizeof(E)@p /sizeof(T)) ) Reviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171016023357.20174-1-jeremy.lefaure@lse.epita.fr
-
Jérémy Lefaure authored
Using the ARRAY_SIZE macro improves the readability of the code. Also, it is useless to re-invent it. Found with Coccinelle with the following semantic patch: @r depends on (org || report)@ type T; T[] E; position p; @@ ( (sizeof(E)@p /sizeof(*E)) | (sizeof(E)@p /sizeof(E[...])) | (sizeof(E)@p /sizeof(T)) ) Reviewed-by:
-
Chen-Yu Tsai authored
Initially we configured the PAD_CTRL1 register at probe/bind time. However it seems the HDMI controller will modify some of the bits in this register by itself. On the A10 it is particularly annoying as it toggles the output invert bits, which inverts the colors on the display output. The U-boot driver this driver is based on sets this register twice, though it seems it's only needed for actual display output. Hence we move it to the mode_set function. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-8-wens@csie.org
-
Chen-Yu Tsai authored
While debugging inverted color from the HDMI output on the A10, I found that the lowest 3 bits were set. These were cleared on A20 boards that had normal display output. By manually toggling these bits the mapping of the color components to these bits was found. While these are not used anywhere, it would be nice to document them somewhere. Signed-off-by:
-
Chen-Yu Tsai authored
Many of the backend's layer configuration registers have undefined default values. This poses a risk as we use regmap_update_bits in some places, and don't overwrite the whole register. At probe/bind time we explicitly clear all the control registers by writing 0 to them. This patch adds a more detailed explanation on why we're doing this. Signed-off-by:
-
Chen-Yu Tsai authored
Commit 4636ce93 ("drm/fb-cma-helper: Add drm_fb_cma_get_gem_addr()") adds a new helper, which covers fetching a drm_framebuffer's GEM object and calculating the buffer address for a given plane. This patch uses this helper to replace our own open coded version of the same function. Signed-off-by:
-
Chen-Yu Tsai authored
The backend has various clocks and reset controls that need to be enabled and deasserted before register access is possible. Move the creation of the regmap to after the clocks and reset controls have been configured where it makes more sense. Signed-off-by:
-
Chen-Yu Tsai authored
Even though the components framework can handle duplicate entries, the extra entries cause a lot more debug messages to be generated, which would be confusing to developers not familiar with our driver and the framework in general. Instead, we can scan the relatively small queue and check if the component to be added is already queued up. Since the display pipelines are symmetrical (not considering the third display pipeline on the A80), and we add components level by level, when we get to the second instance at the same level, any shared downstream components would already be in the queue. Signed-off-by:
-
- 13 Oct, 2017 13 commits
-
-
Eric Anholt authored
The documentation said to use src_w here, and I didn't consider that we actually needed to be using pitch somewhere in our setup. Fixes scanout on my DSI panel when X11 does initial setup with 1920x1080 HDMI and 800x480 DSI both at 0,0 of the same framebuffer. v2: Add some comments requested by Boris Signed-off-by:
Eric Anholt <eric@anholt.net> Fixes: 98830d91 ("drm/vc4: Add T-format scanout support.") Link: https://patchwork.freedesktop.org/patch/msgid/20170927193209.11870-1-eric@anholt.netReviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com>
-
https://git.pengutronix.de/git/lst/linuxDave Airlie authored
Most notable addition this time is the support for the GPU performance counters by Christian. This has been in the making for some time and it has matured a lot. Since this is adding UAPI, the corresponding WIP userspace can be found at [1] mesa/libdrm repos. I expect that Christian sends out the final userspace patches for this once you have pulled the kernel bits. Philipp optimized the probe path, so etnaviv gets out of the way for systems that want to boot real quick. I've done mostly cleanups, disentangling etnaviv from the IOMMU API, with some MMUv1 optimizations on the way. * 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux: (36 commits) drm/etnaviv: remove unnecessary clock stabilization delay drm/etnaviv: reduce reset delay drm/etnaviv: remove unused function etnaviv_gem_new drm/etnaviv: remove stale comment drm/etnaviv: submit supports performance monitor requests drm/etnaviv: enable debug registers on demand drm/etnaviv: need to disable clock gating when doing profiling drm/etnaviv: add MC perf domain drm/etnaviv: add TX perf domain drm/etnaviv: add RA perf domain drm/etnaviv: add SE perf domain drm/etnaviv: add PA perf domain drm/etnaviv: add SH perf domain drm/etnaviv: add PE perf domain drm/etnaviv: add HI perf domain drm/etnaviv: use 'sync points' for performance monitor requests drm/etnaviv: clear alloced event drm/etnaviv: add 'sync point' support drm/etnaviv: add performance monitor request processing drm/etnaviv: copy pmrs from userspace ...
-
Eric Anholt authored
We want the adjusted_mode->clock to be the actual clock we're expecting to program, so that consumers see the right values for clock and vrefresh. Signed-off-by:
-
Harsha Sharma authored
Prefer kcalloc over kzalloc to allocate an array. This patch fixes checkcpatch issue. Signed-off-by:
Harsha Sharma <harshasharmaiitr@gmail.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171013073747.29877-1-harshasharmaiitr@gmail.com Link: https://patchwork.freedesktop.org/patch/msgid/20171013073747.29877-1-harshasharmaiitr@gmail.com
-
Haneen Mohammed authored
Since the driver is relying on the atomic helpers, remove the explicit .best_encoder assignment and let the core call drm_atomic_helper_best_encoder(). Signed-off-by:
Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171010205858.GA4806@Haneen
-
Harsha Sharma authored
Convert instances of dev_error to DRM_DEV_ERROR as we have DRM_DEV_ERROR variants of drm print macros. Signed-off-by:
-
Maarten Lankhorst authored
Core drm shouldn't depend on anything in drm-kms-helper, or the drm module will fail to load. insmod drm fails with [ 6087.674390] drm: Unknown symbol drm_panel_bridge_remove (err 0) which is defined in drm_kms_helper.ko This call was added by commit c70087e8 ("drm/drm_of: add drm_of_panel_bridge_remove function"), and the fix is defining it in the drm_of.h header, to break the circular dependency. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8f95e623-9480-97dc-2414-77086d8aa49d@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@intel.com> #irc Fixes: c70087e8 ("drm/drm_of: add drm_of_panel_bridge_remove function") Acked-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org>
-
Thierry Reding authored
Fix up this reference so that the proper link is generated in the documentation and so that people don't go chasing after the wrong function for an embarrassingly long time. Acked-by:
-
Thierry Reding authored
Fix "esay-to-use" to "easy-to-use" typo. Acked-by:
-
Ville Syrjälä authored
'user_handles' needs a __user annotation for fix the following sparse warning: drm_syncobj.c:813:37: warning: incorrect type in argument 2 (different address spaces) drm_syncobj.c:813:37: expected void const [noderef] <asn:1>*from drm_syncobj.c:813:37: got void *user_handles drm_syncobj.c:875:38: warning: incorrect type in argument 2 (different address spaces) drm_syncobj.c:875:38: expected void *user_handles drm_syncobj.c:875:38: got void [noderef] <asn:1>*<noident> drm_syncobj.c:908:38: warning: incorrect type in argument 2 (different address spaces) drm_syncobj.c:908:38: expected void *user_handles drm_syncobj.c:908:38: got void [noderef] <asn:1>*<noident> drm_syncobj.c:941:38: warning: incorrect type in argument 2 (different address spaces) drm_syncobj.c:941:38: expected void *user_handles drm_syncobj.c:941:38: got void [noderef] <asn:1>*<noident> Cc: Jason Ekstrand <jason@jlekstrand.net> Fixes: 3e6fb72d ("drm/syncobj: Add a syncobj_array_find helper") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170901165328.24459-2-ville.syrjala@linux.intel.comReviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linuxDave Airlie authored
omapdrm changes for 4.15 * OMAP4 HDMI CEC support * tag 'omapdrm-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: omapdrm: omapdss_hdmi_ops: add lost_hotplug op omapdrm: hdmi4: hook up the HDMI CEC support omapdrm: hdmi4_cec: add OMAP4 HDMI CEC support omapdrm: hdmi4: refcount hdmi_power_on/off_core omapdrm: hdmi4: move hdmi4_core_powerdown_disable to hdmi_power_on_core() omapdrm: hdmi4: prepare irq handling for HDMI CEC support omapdrm: hdmi4: make low-level functions available omapdrm: hdmi.h: extend hdmi_core_data with CEC fields omapdrm: encoder-tpd12s015: keep ls_oe_gpio high
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
More 4.15 drm-misc stuff: Cross-subsystem Changes: - bridge cleanup refactor (Benjamin Gaignard) Core Changes: - less surprising atomic iterators (Maarten), fixes an oops introduced in drm-next - better gem/fb helper docs (Noralf) - fix dma-buf rcu races (Christian König) Driver Changes: - adv7511: CEC support (Hans Verkuil) - sun4i update from Chen-Yu to improve hdmi and A31 support - sii8620: add remote control support (Maceiej Purski) New drivers: - SiI9234 bridge driver (Maciej Purski) - 7" rpi touch panel (Eric Anholt) Note that this contains a topic pull from regmap, needed by the sun4i changes. Mark Brown sent that out for pulling into drm-misc. * tag 'drm-misc-next-2017-10-12' of git://anongit.freedesktop.org/drm/drm-misc: (29 commits) drm/dp: WARN about invalid/unknown link rates and bw codes drm/msm/mdp5: remove less than 0 comparison for unsigned value drm/bridge/sii8620: add remote control support drm/sun4i: hdmi: Add support for A31's HDMI controller drm/sun4i: hdmi: Add A31 specific DDC register definitions drm/sun4i: hdmi: Add support for controller hardware variants dt-bindings: display: sun4i: Add binding for A31 HDMI controller drm/sun4i: hdmi: Allow using second PLL as TMDS clk parent drm/sun4i: hdmi: create a regmap for later use drm/sun4i: hdmi: Disable clks in bind function error path and unbind function drm/sun4i: tcon: Add support for demuxing TCON output on A31 drm/sun4i: tcon: Add variant callback for TCON output muxing drm/bridge/synopsys: dsi :remove is_panel_bridge drm/vc4: remove bridge from driver internal structure drm/stm: ltdc: remove bridge from driver internal structure drm/drm_of: add drm_of_panel_bridge_remove function drm/bridge: make drm_panel_bridge_remove more robust dma-fence: fix dma_fence_get_rcu_safe v2 dma-buf: make reservation_object_copy_fences rcu save drm/atomic: Unref duplicated drm_atomic_state in drm_atomic_helper_resume() ...
-
Arnd Bergmann authored
The new driver fails to build when CONFIG_PINCTRL is disabled: drivers/gpu/drm/rockchip/rockchip_lvds.c: In function 'rockchip_lvds_grf_config': drivers/gpu/drm/rockchip/rockchip_lvds.c:229:39: error: dereferencing pointer to incomplete type 'struct dev_pin_info' if (lvds->pins && !IS_ERR(lvds->pins->default_state)) This adds the respective Kconfig dependency. Fixes: 34cc0aa2 ("drm/rockchip: Add support for Rockchip Soc LVDS") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Mark Yao <mark.yao@rock-chips.com> Signed-off-by:
-
- 12 Oct, 2017 16 commits
-
-
Arnd Bergmann authored
There is a risk of overflowing vblank timestamps in 2038 or 2106 if someone sets the drm_timestamp_monotonic module parameter to zero. I found no indication of anyone ever setting the parameter, or complaining about the default being wrong, after it was introduced as a way to handle backwards-compatibility with linux prior to c61eef72 ("drm: add support for monotonic vblank timestamps"), so it's probably safer to just remove the parameter completely and only allowing the default behavior. Signed-off-by:
Daniel Stone <daniels@collabora.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Arnd Bergmann authored
The drm vblank handling uses 'timeval' to store timestamps in either monotonic or wall-clock time base. In either case, it reads the current time as a ktime_t in get_drm_timestamp() and converts it from there. This is a bit suspicious, as users of 'timeval' often suffer from the time_t overflow in y2038. I have gone through this code and found that it is unlikely to cause problems here: - The user space ABI does not use time_t or timeval, but uses 'u32' and 'long' as the types. This means at least that rebuilding user programs against a new libc with 64-bit time_t does not change the ABI. - As of commit c61eef72 ("drm: add support for monotonic vblank timestamps") in linux-3.8, the monotonic timestamp is the default and can only get reverted to wall-clock through a module-parameter. - With the default monotonic timestamps, there is no problem at all. - The drm_wait_vblank_ioctl() interface is alway safe on 64-bit architectures, on 32-bit it might overflow the 'long' timestamps in 2038 with wall-clock timestamps. - The event handling uses 'u32' seconds, which overflow in 2106 on both 32-bit and 64-bit machines, when wall-clock timestamps are used. - The effect of overflowing either of the two is only temporary (during the overflow, and is likely to keep working again afterwards. It is likely the same problem as observing a 'settimeofday()' call, which was the reason for moving to the monotonic timestamps in the first place. Overall, this seems good enough, so my patch removes the use of 'timeval' from the vblank handling altogether and uses ktime_t consistently, except for the part where we copy the data to user space structures in the existing format. Signed-off-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
-
Dan Carpenter authored
The of_graph_get_remote_node() function doesn't return error pointers, it returns NULL on error so I've updated the check. Fixes: 86418f90 ("drm: convert drivers to use of_graph_get_remote_node") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Allen Pais authored
Signed-off-by:
Allen Pais <allen.lkml@gmail.com> Signed-off-by:
-
Ville Syrjälä authored
On machines where the vblank interrupt fires some time after the start of vblank (or we just manage to race with the vblank interrupt handler) we will currently stuff a stale vblank counter value into the flip event, and thus we'll prematurely complete the flip. Switch over to drm_crtc_accurate_vblank_count() to make sure we have an up to date counter value, crucially also remember to add the +1 so that the delayed vblank interrupt won't complete the flip prematurely. Cc: stable@vger.kernel.org Cc: Daniel Vetter <daniel@ffwll.ch> Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Hans Verkuil authored
The CEC framework needs to know when the hotplug detect signal disappears, since that means the CEC physical address has to be invalidated (i.e. set to f.f.f.f). Add a lost_hotplug op that is called when the HPD signal goes away. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Hans Verkuil authored
Hook up the HDMI CEC support in the hdmi4 driver. It add the CEC irq handler, the CEC (un)init calls and tells the CEC implementation when the physical address changes. Signed-off-by:
-
Hans Verkuil authored
Add the source and header for the OMAP4 HDMI CEC support. This code is not yet hooked up, that will happen in the next patch. Signed-off-by:
-
Hans Verkuil authored
The hdmi_power_on/off_core functions can be called multiple times: when the HPD changes and when the HDMI CEC support needs to power the HDMI core. So use a counter to know when to really power on or off the HDMI core. Signed-off-by:
-
Hans Verkuil authored
Call hdmi4_core_powerdown_disable() in hdmi_power_on_core() to power up the HDMI core (needed for CEC). The same call can now be dropped in hdmi4_configure(). Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Hans Verkuil authored
Pass struct omap_hdmi to the irq handler since it will need access to hdmi.core. Do not clear the IRQ_HDMI_CORE bit: that will be controlled by the HDMI CEC code. Signed-off-by:
-
Hans Verkuil authored
Three low-level functions in hdmi4.c and hdmi4_core.c are made available for use by the OMAP4 CEC support. Renamed the prefix to hdmi4 since these are OMAP4 specific. These function deal with the HDMI core and are needed to power it up for use with CEC, even when the HPD is low. Background: even if the HPD is low it should still be possible to use CEC. Some displays will set the HPD low when they go into standby or when they switch to another input, but CEC is still available and able to wake up/change input for such a display. This is explicitly allowed by the CEC standard. Signed-off-by:
-
Hans Verkuil authored
Extend the hdmi_core_data struct with the additional fields needed for CEC. Also fix a simple typo in a comment. Signed-off-by:
-
Hans Verkuil authored
For OMAP4 CEC support the CEC pin should always be on. So keep ls_oe_gpio high all the time in order to support CEC. Background: even if the HPD is low it should still be possible to use CEC. Some displays will set the HPD low when they go into standby or when they switch to another input, but CEC is still available and able to wake up/change input for such a display. This is explicitly allowed by the CEC standard. Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
2nd batch of v4.15 features: - lib/scatterlist updates, use for userptr allocations (Tvrtko) - Fixed point wrapper cleanup (Mahesh) - Gen9+ transition watermarks, watermark optimization and fixes (Mahesh) - Display IPC (Isochronous Priority Control) support (Mahesh) - GEM workaround fixes (Oscar) - GVT: PCI config sanitize series (Changbin) - GVT: Workload submission error handling series (Fred) - PSR fixes and refactoring (Rodrigo) - HWSP based optimizations (Chris) - Private PAT management (Zhi) - IRQ handling fixes and refactoring (Ville) - Module parameter refactoring and variable name clash fix (Michal) - Execlist refactoring, incomplete request unwinding on reset (Chris) - GuC scheduling improvements (Michal) - OA updates (Lionel) - Coffeelake out of alpha support (Rodrigo) - seqno fixes (Chris) - Execlist refactoring (Mika) - DP and DP MST cleanups (Dhinakaran) - Cannonlake slice/sublice config (Ben) - Numerous fixes all around (Everyone) * tag 'drm-intel-next-2017-09-29' of git://anongit.freedesktop.org/drm/drm-intel: (168 commits) drm/i915: Update DRIVER_DATE to 20170929 drm/i915: Use memset64() to prefill the GTT page drm/i915: Also discard second CRC on gen8+ platforms. drm/i915/psr: Set frames before SU entry for psr2 drm/dp: Add defines for latency in sink drm/i915: Allow optimized platform checks drm/i915: Avoid using dev_priv->info.gen directly. i915: Use %pS printk format for direct addresses drm/i915/execlists: Notify context-out for lost requests drm/i915/cnl: Add support slice/subslice/eu configs drm/i915: Compact device info access by a small re-ordering drm/i915: Add IS_PLATFORM macro drm/i915/selftests: Try to recover from a wedged GPU during reset tests drm/i915/huc: Reorganize HuC authentication drm/i915: Fix default values of some modparams drm/i915: Extend I915_PARAMS_FOR_EACH with default member value drm/i915: Make I915_PARAMS_FOR_EACH macro more flexible drm/i915: Enable scanline read based on frame timestamps drm/i915/execlists: Microoptimise execlists_cancel_port_request() drm/i915: Don't rmw PIPESTAT enable bits ...
-
Keith Packard authored
This will allow __drm_mode_object_file to be extended to perform access control checks based on the file in use. v2: Also fix up vboxvideo driver in staging [airlied: merging early as this is an API change] Suggested-by:
-
- 11 Oct, 2017 2 commits
-
-
Jani Nikula authored
Falling back to the lowest value is likely the only thing we can do, but doing it silently seems like a bad thing to do. Catch it early and make loud noises. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Daniel Vetter authored
Merge tag 'regmap-poll-field' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into drm-misc-next regmap: Add field polling macro Requested by Maxime Ripard to make sun4i compile again (next time the other way round is better). Signed-off-by:
-
