The Quanta NL3 laptop has both a headphone output jack and a headset
jack, on the right edge of the chassis.

The pin information suggests that both of these are at the Front.
The PulseAudio is confused to differentiate them so one of the jack
can neither get the jack sense working nor the audio output.

The ALC269_FIXUP_LIFEBOOK chained with ALC269_FIXUP_QUANTA_MUTE can
help to differentiate 2 jacks and get the 'Auto-Mute Mode' working
correctly.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201222150459.9545-1-chiu@endlessos.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

The BOSS GT-1 (USB ID 0582:01d6) requires implicit feedback
like other similar BOSS devices. This patch adds this support.

[ rearranged the table entry in the ID order -- tiwai ]
Signed-off-by: Mike Oliphant <oliphant@nostatic.org>
Link: https://lore.kernel.org/r/20201221215533.2511-1-oliphant@nostatic.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

ASUS PRIME TRX40 PRO-S mobo with 0b05:1918 needs the same quirk alias
for another ASUS mobo (0b05:1917) for the proper mixer mapping, etc.
Add the corresponding entry.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210783
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201221080159.24468-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Remove redundant comments
Signed-off-by: YangHui <yanghui.def@gmail.com>
Link: https://lore.kernel.org/r/1608531727-5433-1-git-send-email-yanghui.def@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

MSI-GP73 (with SSID 1462:1229) requires yet again
ALC1220_FIXUP_CLEVO_P950 quirk like other MSI models.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210793
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201220080943.24839-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

There are a few places that call round{up|down}_pow_of_two() with the
value zero, and this causes undefined behavior warnings.  Avoid
calling those macros if such a nonsense value is passed; it's a minor
optimization as well, as we handle it as either an error or a value to
be skipped, instead.

Reported-by: syzbot+33ef0b6639a8d2d42b4c@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201218161730.26596-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The PCM hw_params core function tries to clear up the PCM buffer
before actually using for avoiding the information leak from the
previous usages or the usage before a new allocation.  It performs the
memset() with runtime->dma_bytes, but this might still leave some
remaining bytes untouched; namely, the PCM buffer size is aligned in
page size for mmap, hence runtime->dma_bytes doesn't necessarily cover
all PCM buffer pages, and the remaining bytes are exposed via mmap.

This patch changes the memory clearance to cover the all buffer pages
if the stream is supposed to be mmap-ready (that guarantees that the
buffer size is aligned in page size).
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20201218145625.2045-3-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Currently the standard memory allocator (snd_dma_malloc_pages*())
passes the byte size to allocate as is.  Most of the backends
allocates real pages, hence the actual allocations are aligned in page
size.  However, the genalloc doesn't seem assuring the size alignment,
hence it may result in the access outside the buffer when the whole
memory pages are exposed via mmap.

For avoiding such inconsistencies, this patch makes the allocation
size always to be aligned in page size.

Note that, after this change, snd_dma_buffer.bytes field contains the
aligned size, not the originally requested size.  This value is also
used for releasing the pages in return.
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20201218145625.2045-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Some buggy firmware don't give the current sample rate but leaves
zero.  Handle this case more gracefully without warning but just skip
the current rate verification from the next time.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201218145858.2357-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Since commit d4cfb30f ("ALSA: pcm: Set per-card upper limit of PCM
buffer allocations") snd_pcm_lib_preallocate_dma_free() is a single line
function that has one caller, which is another single line function.

Clean this up a bit and remove snd_pcm_lib_preallocate_dma_free() and
directly call do_free_pages() from snd_pcm_lib_preallocate_free(). This is
a bit less boilerplate.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20201218153400.18394-1-lars@metafoo.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add VID to support native DSD reproduction on FiiO devices.
Tested-by: Amadej Kastelic <amadejkastelic7@gmail.com>
Signed-off-by: Emilio Moretti <emilio.moretti@gmail.com>
Signed-off-by: Amadej Kastelic <amadejkastelic7@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/X9j7wdXSr4XyK7Bd@ryzen.localdomainSigned-off-by: Takashi Iwai <tiwai@suse.de>

Since mmap for userspace is based on page alignment, add page alignment
for iram alloc from pool, otherwise, some good data located in the same
page of dmab->area maybe touched wrongly by userspace like pulseaudio.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1608221747-3474-1-git-send-email-yibin.gong@nxp.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

This platform only supported iphone type headset.
It can't support Dell headset mode.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/b97e971978034bc9b772a08ec91265e8@realtek.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Acer TravelMate laptops P648/P658 series with codec ALC282 only have
one physical jack for headset but there's a confusing lineout pin on
NID 0x1b reported. Audio applications hence misunderstand that there
are a speaker and a lineout, and take the lineout as the default audio
output.

Add a new quirk to remove the useless lineout and enable the pin 0x18
for jack sensing and headset microphone.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201216125200.27053-1-chiu@endlessos.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v5.11' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.11

There's a lot of changes here but mostly cleanups and driver specific
things, the most user visible change is the support for boot time
selection of Intel DSP firmware which will make it easier for people to
move over to the preferred modern implementations in distros and other
large scale deployments.

This also includes a merge of the new auxillary bus which was done in
anticipation of use by the Intel DSP drivers which didn't quite make it.

 - Lots more cleanups and simplifications from Morimoto-san.
 - Support for some basic DPCM systems in the audio graph card from
   Sameer Pujar.
 - Remove some old pre-DT Freescale drivers for platforms that are now
   DT only.
 - Move selection of which Intel DSP implementation to use to boot time
   rather than requiring it to be selected at build time.
 - Support for Allwinner H6 I2S, Analog Devices ADAU1372, Intel
   Alderlake-S, GMediatek MT8192, NXP i.MX HDMI and XCVR, Realtek RT715,
   Qualcomm SM8250 and simple GPIO based muxes.

syzbot spotted a potential out-of-bounds shift in the PCM OSS layer
where it calculates the buffer size with the arbitrary shift value
given via an ioctl.

Add a range check for avoiding the undefined behavior.
As the value can be treated by a signed integer, the max shift should
be 30.

Reported-by: syzbot+df7dc146ebdd6435eea3@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201209084552.17109-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

syzbot spotted a potential out-of-bounds shift in the USB-audio format
parser that receives the arbitrary shift value from the USB
descriptor.

Add a range check for avoiding the undefined behavior.

Reported-by: syzbot+df7dc146ebdd6435eea3@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201209084552.17109-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add pre-dsp download initialization for the DAC's used in the surround
sound configuration. Fixes issues of no audio on surround channels.

Fixes: 2e492b8e ("ALSA: hda/ca0132 - Add ZxR init commands")
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201211225504.4508-2-conmanx360@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add helper functions for the 8051 PLL PMU write verbs.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201211225504.4508-1-conmanx360@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge series "ASoC: SOF: Intel: fix to dsp state dump trace levels" from Kai Vehmanen <kai.vehmanen@linux.intel.com>:

Small series that addresses a problem where DSP status dump
for a failure case, ends up being printed as as debug print. This
is important information for any bug report. While at it, the series
contains a few cleanups to related code.

Ranjani Sridharan (3):
  ASoC: SOF: Intel: hda: remove duplicated status dump
  ASoC: SOF: modify the SOF_DBG flags
  ASoC: SOF: Intel: hda: fix the condition passed to sof_dev_dbg_or_err

 sound/soc/sof/debug.c            |  2 +-
 sound/soc/sof/intel/byt.c        |  2 +-
 sound/soc/sof/intel/hda-loader.c | 19 +++++++++++++------
 sound/soc/sof/intel/hda.c        | 10 ++++------
 sound/soc/sof/loader.c           |  4 ++--
 sound/soc/sof/ops.c              |  2 +-
 sound/soc/sof/sof-priv.h         | 13 ++++++++-----
 7 files changed, 30 insertions(+), 22 deletions(-)

--
2.29.2

Merge series "ASoC: rt1015p: delay 300ms for waiting calibration" from Tzung-Bi Shih <tzungbi@google.com>:

The 1st patch moves SDB control from DAI ops trigger to DAPM event
(per review comments in v1).

The 2nd patch adds the 300ms delay for waiting calibration.

Changes from v2:
- Use gpiod_set_value_cansleep() instead of gpiod_set_value().
(https://patchwork.kernel.org/project/alsa-devel/patch/20201210033617.79300-2-tzungbi@google.com/)
- Assuming the calibration state gets lost after system suspend.
(https://patchwork.kernel.org/project/alsa-devel/patch/20201210033617.79300-3-tzungbi@google.com/)

Changes from v1:
(https://patchwork.kernel.org/project/alsa-devel/patch/20201209033742.3825973-1-tzungbi@google.com/)
- Move the delay from trigger to DAPM event.

Tzung-Bi Shih (2):
  ASoC: rt1015p: move SDB control from trigger to DAPM
  ASoC: rt1015p: delay 300ms after SDB pulling high for calibration

 sound/soc/codecs/rt1015p.c | 69 ++++++++++++++++++--------------------
 1 file changed, 32 insertions(+), 37 deletions(-)

--
2.29.2.684.gfbc64c5ab5-goog

The check for infoframe transmit status in hdmi_infoframe_uptodate()
makes the assumption that packet buffer index is set to zero.

Align code with specification and explicitly set the index before
AC_VERB_GET_HDMI_DIP_XMIT. The packet index setting affects both
DIP-Data and DIP-XmitCtrl verbs.

There are no known cases where the old implementation has caused driver
to work incorrectly. This change is purely based on code review against
the specification (HDA spec rev1.0a).
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211131613.3271407-1-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add missing parameters to avoid W=1 error
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211102255.3189589-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This has a goto followed by an unreachable return statement.  The goto
is correct because it cleans up so the current runtime behavior is fine.
Let's delete the unreachable return statement.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X9NFg3KVm16Gx6Io@mwandaSigned-off-by: Mark Brown <broonie@kernel.org>

Adds PM ops to machine drivers so that they notify components in the
sound card when system suspend.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201211051334.2313899-1-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

Dan reported that smatch reports wrong size check and after analysis it
is confirmed that we are comparing wrong value: pointer size instead of
array size. However the check itself is problematic as in UAPI header
there are two fields:

struct snd_soc_tplg_enum_control {
    (...)
    char texts[SND_SOC_TPLG_NUM_TEXTS][SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
    __le32 values[SND_SOC_TPLG_NUM_TEXTS * SNDRV_CTL_ELEM_ID_NAME_MAXLEN / 4];

the texts field is for names and the values one for values assigned to
those named fields, after analysis it becomes clear that there is quite
a lot overhead values than we may possibly name. So instead of changing
check to ARRAY_SIZE(ec->values), as it was first suggested, use
hardcoded value of SND_SOC_TPLG_NUM_TEXTS.

Link: https://lore.kernel.org/alsa-devel/X9B0eDcKy+9B6kZl@mwanda/Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201210152541.191728-1-amadeuszx.slawinski@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

When we parse "values" we perform check if there is correct number of
them. However similar check is missing in case of "texts", add it.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201210152541.191728-2-amadeuszx.slawinski@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The condition boot_iteration == HDA_FW_BOOT_ATTEMPTS to determine
the log level for the DSP status dump would only work in the case of DSP
init failure after maximum number of attempts to initialize the DSP. If
DSP init succeeds in less than HDA_FW_BOOT_ATTEMPTS attempts and FW
loading fails, the ROM status dump would end up getting logged as debug
instead of an error.

So, add a new flag, SOF_DBG_DUMP_LOG_ERROR, to explicitly specify
the log level for DSP status dump.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211100743.3188821-4-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The SOF_DBG_* macros are used for dual purposes right now, for the
sof_core_debug module parameter and for the dbg_dump() ops. So, separate
these two types of flags into different types to avoid confusion.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211100743.3188821-3-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove the duplicate status dump in case DSP init fails. The core will
be powered down in this case and the status dump will be invalid anyway.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211100743.3188821-2-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

RT1015p needs 300ms delay after SDB pulling high for internal
calibration during the power on sequence.

Delays 300ms right before data sends out to avoid data truncated.

Assuming the calibration state gets lost after system suspend.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201211051224.2307349-3-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

Moves SDB control from DAI ops trigger to DAPM.  As long as BCLK
and LRCLK are ready, SDB can be toggled earlier.

Changes from using gpiod_set_value() to gpiod_set_value_cansleep()
because it executes in non-atomic context.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201211051224.2307349-2-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

The error handling frees "ctl" but it's still on the "dsp->ctl_list"
list so that could result in a use after free.  Remove it from the list
before returning.

Fixes: 2323736d ("ASoC: wm_adsp: Add basic support for rev 1 firmware file format")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/X9B0keV/02wrx9Xs@mwandaSigned-off-by: Mark Brown <broonie@kernel.org>

The current channel-map control implementation in USB-audio driver may
lead to an error message like
  "control 3:0:0:Playback Channel Map:0: access overflow"
when CONFIG_SND_CTL_VALIDATION is set.  It's because the chmap get
callback clears the whole array no matter which count is set, and
rather the false-positive detection.

This patch fixes the problem by clearing only the needed array range
at usb_chmap_ctl_get().

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201211130048.6358-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The debug prints from patch_hdmi.c are not aligned with HDA common code
in hda_codec.c nor with other HDA codec drivers.

To align with rest of the codebase, use hexadecimal formatting whenever
printing value of a HDA NID. Also refer to NIDs with capital letters in
traces as is done other modules. This presentation is also aligned with
the formatting used in HDA codec procfs entry.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211124547.3243871-1-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add supported for more Lenovo ALC285 Headset Button.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/bb1f1da1526d460885aa4257be81eb94@realtek.comSigned-off-by: Takashi Iwai <tiwai@suse.de>