- 24 Apr, 2008 40 commits
-
-
Albert Comerma authored
This patch introduces support for dvb-t for the following DiBcom based cards: - Terratec Cinergy HT USB XE (USB-ID: 0ccd:0058) - Terratec Cinergy HT Express (USB-ID: 0ccd:0060) - Pinnacle 320CX (USB-ID: 2304:022e) - Pinnacle PCTV72e (USB-ID: 2304:0236) - Pinnacle PCTV73e (USB-ID: 2304:0237) - Yuan EC372S (USB-ID: 1164:1edc) Signed-off-by:
Hans-Frieder Vogt <hfvogt@gmx.net> Signed-off-by:
Felix Apitzsch <F.Apitzsch@soz.uni-frankfurt.de> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Albert Comerma <albert.comerma@gmail.com> Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Andre Weidemann authored
Added support for Technotrend connect S-2400. Signed-off-by:
Andre Weidemann <Andre.Weidemann@web.de> Signed-off-by:
-
Patrick Boettcher authored
To support a new device based on CX24123 (using the CX24113-tuner) the following was done: - added two parameters to de-select the internal PLL-driver (for CX24108) and a AGC-function callback. - added a virtual i2c-adapter which allow simple access behind the i2c-gate - cleanup up some code Signed-off-by:
-
Patrick Boettcher authored
To prepare the support for new device to the flexcop-family some preparation and cleanups was done + some saneness: - created an i2c-adapter for each i2c-port available. Easier usage for devices with several device on different i2c-busses - initialize i2c before doing the eeprom read - changed the way to attach the different frontends, easier to read now - enabled support for i2c-devices having no register address (1-byte access) Signed-off-by:
-
Frej Drejhammar authored
An enabled color killer will not degrade picture quality for color input signals, only suppress bogus color information on black-and-white input. Therefore enable it by default. Signed-off-by:
Frej Drejhammar <frej.drejhammar@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Thanks to Cyrill Gorcunov <gorcunov@gmail.com> for pointing this Signed-off-by: -
Roel Kluin authored
include/linux/video_decoder.h: 34:#define DECODER_SET_NORM _IOW('d', 3, int) 35:#define DECODER_SET_INPUT _IOW('d', 4, int) untested, please confirm it's right. Test cmd value, not definition of DECODER_SET_INPUT Signed-off-by:Roel Kluin <12o3l@tiscali.nl> Signed-off-by:
-
Mauro Carvalho Chehab authored
Thanks to timf <timf@iinet.net.au>, "Richard (MQ)" <osl2008@googlemail.com> and gian luca rasponi <lucarasp@inwind.it> for their tests. Signed-off-by: -
Mauro Carvalho Chehab authored
Thanks to Jiri Slaby <jirislaby@gmail.com> for pointing this issue. Signed-off-by: -
Mauro Carvalho Chehab authored
Thanks to Michael Krufky for pointing this. Signed-off-by: -
Frej Drejhammar authored
The cx2388x family has a color killer. This patch implements the V4L2_CID_COLOR_KILLER control for the cx2388x family. By default the color killer is disabled, as in previous versions of the driver. Signed-off-by: "Frej Drejhammar <frej.drejhammar@gmail.com>" Signed-off-by: -
Frej Drejhammar authored
Define a pre-defined control ID for color killer functionality. Signed-off-by: "Frej Drejhammar <frej.drejhammar@gmail.com>" Signed-off-by: -
Frej Drejhammar authored
An enabled chroma AGC will not degrade picture quality if enabled on a color PAL or NTSC signal with nominal signal levels. It will give a significant color reproduction improvement if the chroma signals diverge from nominal levels. Therefore enable chroma AGC by default for PAL and NTSC standards. Signed-off-by: "Frej Drejhammar <frej.drejhammar@gmail.com>" Signed-off-by: -
Frej Drejhammar authored
The cx2388x family has support for chroma AGC. This patch implements a the V4L2_CID_CHROMA_AGC control for the cx2388x family. By default chroma AGC is disabled, as in previous versions of the driver. Signed-off-by: "Frej Drejhammar <frej.drejhammar@gmail.com>" Signed-off-by: -
Frej Drejhammar authored
Define a pre-defined control ID for chroma automatic gain control. Signed-off-by: "Frej Drejhammar <frej.drejhammar@gmail.com>" Signed-off-by: -
Marton Balint authored
If the IR worker is not stopped before the removal of the cx88xx module, an OOPS may occur, because the worker function cx88_ir_work gets called. So stop the ir worker. Signed-off-by:
Marton Balint <cus@fazekas.hu> Signed-off-by:
-
Mauro Carvalho Chehab authored
This board has a s5h1409 demod, plus a xc30x8 tuner (probably, xc3018). This patch adds proper support for radio, video, s-video, composite and ATSC. However, support for radio and video depends on having s5h1409 i2c gate open, otherwise, xc30x8 chip won't be visible. For a better support, some rework is needed on cx88 driver, to allow adding xc30x8 to i2c bus without sending i2c 0 byte reading to 0xc2 address. Thanks to Vanessa Ezekowitz <vanessaezekowitz@gmail.com> for helping to figure out the proper parameters for s5h1409 and the GPIO pins used by each configuration. Signed-off-by: -
Mike Isely authored
Fix use of a non-int (size_t) being passed in a printf width field. This benign issue has apparently been around for a long time, but went undetected until now. Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Michael Krufky authored
Update Kconfig for the hybrid devices recently converted to use tuner-simple rather than dvb-pll. dvb-bt8xx no longer uses dvb-pll at all, so remove all references to dvb-pll within that driver. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
Fix the following build error: In file included from dvb-bt8xx.c:35: dvb-bt8xx.h:42:26: error: tuner-simple.h: No such file or directory dvb-bt8xx.c: In function 'frontend_init': dvb-bt8xx.c:612: error: 'simple_tuner_attach' undeclared (first use in this function) dvb-bt8xx.c:612: error: (Each undeclared identifier is reported only once dvb-bt8xx.c:612: error: for each function it appears in.) dvb-bt8xx.c:612: warning: type defaults to 'int' in declaration of '__a' dvb-bt8xx.c:612: warning: type defaults to 'int' in declaration of 'type name' dvb-bt8xx.c:612: warning: cast from pointer to integer of different size dvb-bt8xx.c:612: warning: type defaults to 'int' in declaration of 'type name' dvb-bt8xx.c:612: warning: cast from pointer to integer of different size dvb-bt8xx.c:612: error: called object '__a' is not a function dvb-bt8xx.c:696: warning: type defaults to 'int' in declaration of '__a' dvb-bt8xx.c:696: warning: type defaults to 'int' in declaration of 'type name' dvb-bt8xx.c:696: warning: cast from pointer to integer of different size dvb-bt8xx.c:696: warning: type defaults to 'int' in declaration of 'type name' dvb-bt8xx.c:696: warning: cast from pointer to integer of different size dvb-bt8xx.c:696: error: called object '__a' is not a function Signed-off-by:
-
Mauro Carvalho Chehab authored
There are a number of different firmware versions and variants, shipped together with boards. This patch adds an extra parameter to the tuner-xc2028 to allow specifying for an specific firmware name to be loaded. This helps to test for a firmware that better fits some board. Signed-off-by: -
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Force the main pll charge pump or cal pll charge pump to source current to the main pll loop filter or cal pll loop filter, respectively. Signed-off-by:
-
Michael Krufky authored
Set rfagc to high speed mode before setting the pll. Set rfagc to normal speed mode at the end of the function. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
allow device-specific configuration of rf agc rf top and if top Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
The internal calibration signal must be set on the cal pll. Signed-off-by:
-
Michael Krufky authored
Both the tda18271 c1 and c2 parts only need EP3 through MD3 to be written for the image rejection calibration's low band initialization. Signed-off-by:
-
Michael Krufky authored
The ability to select RF input was a supported feature only available on Philips TUV1236d and Philips FCV1236d. This feature, along with support for the tuners that used it, was moved into the tuner-simple module. This can now be removed from dvb-pll. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
remove #if 0'd support for: Philips TUV1236D Philips TD1316 Philips FMD1216ME LG TDVS-H06xF Philips FCV1236D Thomson FE6600 Microtune 4042 FI5 Thomson dtt761x Support for these tuners has been moved into the 'tuner-simple' module. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
