Skip to content

L
linux
Switch branch/tag
  1. 09 Jun, 2021 15 commits
  3. 08 Jun, 2021 9 commits
    • Shay Agroskin's avatar
      net: ena: fix DMA mapping function issues in XDP · 504fd6a5
      Shay Agroskin authored 
      This patch fixes several bugs found when (DMA/LLQ) mapping a packet for
transmission. The mapping procedure makes the transmitted packet
accessible by the device.
When using LLQ, this requires copying the packet's header to push header
(which would be passed to LLQ) and creating DMA mapping for the payload
(if the packet doesn't fit the maximum push length).
When not using LLQ, we map the whole packet with DMA.

The following bugs are fixed in the code:
    1. Add support for non-LLQ machines:
       The ena_xdp_tx_map_frame() function assumed that LLQ is
       supported, and never mapped the whole packet using DMA. On some
       instances, which don't support LLQ, this causes loss of traffic.

    2. Wrong DMA buffer length passed to device:
       When using LLQ, the first 'tx_max_header_size' bytes of the
       packet would be copied to push header. The rest of the packet
       would be copied to a DMA'd buffer.

    3. Freeing the XDP buffer twice in case of a mapping error:
       In case a buffer DMA mapping fails, the function uses
       xdp_return_frame_rx_napi() to free the RX buffer and returns from
       the function with an error. XDP frames that fail to xmit get
       freed by the kernel and so there is no need for this call.

Fixes: 548c4940 ("net: ena: Implement XDP_TX action")
Signed-off-by: default avatarShay Agroskin <shayagr@amazon.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      504fd6a5
    • Vladimir Oltean's avatar
      net: dsa: felix: re-enable TX flow control in ocelot_port_flush() · 1650bdb1
      Vladimir Oltean authored 
      Because flow control is set up statically in ocelot_init_port(), and not
in phylink_mac_link_up(), what happens is that after the blamed commit,
the flow control remains disabled after the port flushing procedure.

Fixes: eb4733d7 ("net: dsa: felix: implement port flushing on .phylink_mac_link_down")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1650bdb1
    • Pavel Skripkin's avatar
      net: rds: fix memory leak in rds_recvmsg · 49bfcbfd
      Pavel Skripkin authored 
      Syzbot reported memory leak in rds. The problem
was in unputted refcount in case of error.

int rds_recvmsg(struct socket *sock, struct msghdr *msg, size_t size,
		int msg_flags)
{
...

	if (!rds_next_incoming(rs, &inc)) {
		...
	}

After this "if" inc refcount incremented and

	if (rds_cmsg_recv(inc, msg, rs)) {
		ret = -EFAULT;
		goto out;
	}
...
out:
	return ret;
}

in case of rds_cmsg_recv() fail the refcount won't be
decremented. And it's easy to see from ftrace log, that
rds_inc_addref() don't have rds_inc_put() pair in
rds_recvmsg() after rds_cmsg_recv()

 1)               |  rds_recvmsg() {
 1)   3.721 us    |    rds_inc_addref();
 1)   3.853 us    |    rds_message_inc_copy_to_user();
 1) + 10.395 us   |    rds_cmsg_recv();
 1) + 34.260 us   |  }

Fixes: bdbe6fbc ("RDS: recv.c")
Reported-and-tested-by: syzbot+5134cdf021c4ed5aaa5f@syzkaller.appspotmail.com
Signed-off-by: default avatarPavel Skripkin <paskripkin@gmail.com>
Reviewed-by: default avatarHåkon Bugge <haakon.bugge@oracle.com>
Acked-by: default avatarSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      49bfcbfd
    • David S. Miller's avatar
      Merge tag 'batadv-net-pullrequest-20210608' of git://git.open-mesh.org/linux-merge · df693f13
      David S. Miller authored 
      Simon Wunderlich says:

====================
Here is a batman-adv bugfix:

 - Avoid WARN_ON timing related checks, by Sven Eckelmann
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      df693f13
    • Nicolas Dichtel's avatar
      vrf: fix maximum MTU · 9bb392f6
      Nicolas Dichtel authored 
      My initial goal was to fix the default MTU, which is set to 65536, ie above
the maximum defined in the driver: 65535 (ETH_MAX_MTU).

In fact, it's seems more consistent, wrt min_mtu, to set the max_mtu to
IP6_MAX_MTU (65535 + sizeof(struct ipv6hdr)) and use it by default.

Let's also, for consistency, set the mtu in vrf_setup(). This function
calls ether_setup(), which set the mtu to 1500. Thus, the whole mtu config
is done in the same function.

Before the patch:
$ ip link add blue type vrf table 1234
$ ip link list blue
9: blue: <NOARP,MASTER> mtu 65536 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether fa:f5:27:70:24:2a brd ff:ff:ff:ff:ff:ff
$ ip link set dev blue mtu 65535
$ ip link set dev blue mtu 65536
Error: mtu greater than device maximum.

Fixes: 5055376a ("net: vrf: Fix ping failed when vrf mtu is set to 0")
CC: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: default avatarDavid Ahern <dsahern@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9bb392f6
    • gushengxian's avatar
      net: appletalk: fix the usage of preposition · d439aa33
      gushengxian authored 
      The preposition "for" should be changed to preposition "of".
Signed-off-by: default avatargushengxian <gushengxian@yulong.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d439aa33
    • Zheng Yongjun's avatar
      net: ipv4: Remove unneed BUG() function · 5ac6b198
      Zheng Yongjun authored 
      When 'nla_parse_nested_deprecated' failed, it's no need to
BUG() here, return -EINVAL is ok.
Signed-off-by: default avatarZheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5ac6b198
    • Nanyong Sun's avatar
      net: ipv4: fix memory leak in netlbl_cipsov4_add_std · d612c3f3
      Nanyong Sun authored 
      Reported by syzkaller:
BUG: memory leak
unreferenced object 0xffff888105df7000 (size 64):
comm "syz-executor842", pid 360, jiffies 4294824824 (age 22.546s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000e67ed558>] kmalloc include/linux/slab.h:590 [inline]
[<00000000e67ed558>] kzalloc include/linux/slab.h:720 [inline]
[<00000000e67ed558>] netlbl_cipsov4_add_std net/netlabel/netlabel_cipso_v4.c:145 [inline]
[<00000000e67ed558>] netlbl_cipsov4_add+0x390/0x2340 net/netlabel/netlabel_cipso_v4.c:416
[<0000000006040154>] genl_family_rcv_msg_doit.isra.0+0x20e/0x320 net/netlink/genetlink.c:739
[<00000000204d7a1c>] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
[<00000000204d7a1c>] genl_rcv_msg+0x2bf/0x4f0 net/netlink/genetlink.c:800
[<00000000c0d6a995>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504
[<00000000d78b9d2c>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:811
[<000000009733081b>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
[<000000009733081b>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340
[<00000000d5fd43b8>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929
[<000000000a2d1e40>] sock_sendmsg_nosec net/socket.c:654 [inline]
[<000000000a2d1e40>] sock_sendmsg+0x139/0x170 net/socket.c:674
[<00000000321d1969>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350
[<00000000964e16bc>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404
[<000000001615e288>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433
[<000000004ee8b6a5>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47
[<00000000171c7cee>] entry_SYSCALL_64_after_hwframe+0x44/0xae

The memory of doi_def->map.std pointing is allocated in
netlbl_cipsov4_add_std, but no place has freed it. It should be
freed in cipso_v4_doi_free which frees the cipso DOI resource.

Fixes: 96cb8e33 ("[NetLabel]: CIPSOv4 and Unlabeled packet integration")
Reported-by: default avatarHulk Robot <hulkci@huawei.com>
Signed-off-by: default avatarNanyong Sun <sunnanyong@huawei.com>
Acked-by: default avatarPaul Moore <paul@paul-moore.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d612c3f3
    • Johannes Berg's avatar
      mac80211: fix deadlock in AP/VLAN handling · d5befb22
      Johannes Berg authored 
      Syzbot reports that when you have AP_VLAN interfaces that are up
and close the AP interface they belong to, we get a deadlock. No
surprise - since we dev_close() them with the wiphy mutex held,
which goes back into the netdev notifier in cfg80211 and tries to
acquire the wiphy mutex there.

To fix this, we need to do two things:
 1) prevent changing iftype while AP_VLANs are up, we can't
    easily fix this case since cfg80211 already calls us with
    the wiphy mutex held, but change_interface() is relatively
    rare in drivers anyway, so changing iftype isn't used much
    (and userspace has to fall back to down/change/up anyway)
 2) pull the dev_close() loop over VLANs out of the wiphy mutex
    section in the normal stop case

Cc: stable@vger.kernel.org
Reported-by: syzbot+452ea4fbbef700ff0a56@syzkaller.appspotmail.com
Fixes: a05829a7 ("cfg80211: avoid holding the RTNL when calling the driver")
Link: https://lore.kernel.org/r/20210517160322.9b8f356c0222.I392cb0e2fa5a1a94cf2e637555d702c7e512c1ff@changeidSigned-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      d5befb22
  5. 07 Jun, 2021 7 commits
  7. 04 Jun, 2021 9 commits
    • Rahul Lakkireddy's avatar
      cxgb4: avoid link re-train during TC-MQPRIO configuration · 3822d067
      Rahul Lakkireddy authored 
      When configuring TC-MQPRIO offload, only turn off netdev carrier and
don't bring physical link down in hardware. Otherwise, when the
physical link is brought up again after configuration, it gets
re-trained and stalls ongoing traffic.

Also, when firmware is no longer accessible or crashed, avoid sending
FLOWC and waiting for reply that will never come.

Fix following hung_task_timeout_secs trace seen in these cases.

INFO: task tc:20807 blocked for more than 122 seconds.
      Tainted: G S                5.13.0-rc3+ #122
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:tc   state:D stack:14768 pid:20807 ppid: 19366 flags:0x00000000
Call Trace:
 __schedule+0x27b/0x6a0
 schedule+0x37/0xa0
 schedule_preempt_disabled+0x5/0x10
 __mutex_lock.isra.14+0x2a0/0x4a0
 ? netlink_lookup+0x120/0x1a0
 ? rtnl_fill_ifinfo+0x10f0/0x10f0
 __netlink_dump_start+0x70/0x250
 rtnetlink_rcv_msg+0x28b/0x380
 ? rtnl_fill_ifinfo+0x10f0/0x10f0
 ? rtnl_calcit.isra.42+0x120/0x120
 netlink_rcv_skb+0x4b/0xf0
 netlink_unicast+0x1a0/0x280
 netlink_sendmsg+0x216/0x440
 sock_sendmsg+0x56/0x60
 __sys_sendto+0xe9/0x150
 ? handle_mm_fault+0x6d/0x1b0
 ? do_user_addr_fault+0x1c5/0x620
 __x64_sys_sendto+0x1f/0x30
 do_syscall_64+0x3c/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f7f73218321
RSP: 002b:00007ffd19626208 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055b7c0a8b240 RCX: 00007f7f73218321
RDX: 0000000000000028 RSI: 00007ffd19626210 RDI: 0000000000000003
RBP: 000055b7c08680ff R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000055b7c085f5f6
R13: 000055b7c085f60a R14: 00007ffd19636470 R15: 00007ffd196262a0

Fixes: b1396c2b ("cxgb4: parse and configure TC-MQPRIO offload")
Signed-off-by: default avatarRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3822d067
    • Yunjian Wang's avatar
      sch_htb: fix refcount leak in htb_parent_to_leaf_offload · 944d671d
      Yunjian Wang authored 
      The commit ae81feb7 ("sch_htb: fix null pointer dereference
on a null new_q") fixes a NULL pointer dereference bug, but it
is not correct.

Because htb_graft_helper properly handles the case when new_q
is NULL, and after the previous patch by skipping this call
which creates an inconsistency : dev_queue->qdisc will still
point to the old qdisc, but cl->parent->leaf.q will point to
the new one (which will be noop_qdisc, because new_q was NULL).
The code is based on an assumption that these two pointers are
the same, so it can lead to refcount leaks.

The correct fix is to add a NULL pointer check to protect
qdisc_refcount_inc inside htb_parent_to_leaf_offload.

Fixes: ae81feb7 ("sch_htb: fix null pointer dereference on a null new_q")
Signed-off-by: default avatarYunjian Wang <wangyunjian@huawei.com>
Suggested-by: default avatarMaxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      944d671d
    • David S. Miller's avatar
      Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue · 26821ecd
      David S. Miller authored 
      Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-06-04

This series contains updates to virtchnl header file and ice driver.

Brett fixes VF being unable to request a different number of queues then
allocated and adds clearing of VF_MBX_ATQLEN register for VF reset.

Haiyue handles error of rebuilding VF VSI during reset.

Paul fixes reporting of autoneg to use the PHY capabilities.

Dave allows LLDP packets without priority of TC_PRIO_CONTROL to be
transmitted.

Geert Uytterhoeven adds explicit padding to virtchnl_proto_hdrs
structure in the virtchnl header file.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      26821ecd
    • David S. Miller's avatar
      Merge branch 'wireguard-fixes' · 6fd815bb
      David S. Miller authored 
      Jason A. Donenfeld says:

====================
wireguard fixes for 5.13-rc5

Here are bug fixes to WireGuard for 5.13-rc5:

1-2,6) These are small, trivial tweaks to our test harness.

3) Linus thinks -O3 is still dangerous to enable. The code gen wasn't so
   much different with -O2 either.

4) We were accidentally calling synchronize_rcu instead of
   synchronize_net while holding the rtnl_lock, resulting in some rather
   large stalls that hit production machines.

5) Peer allocation was wasting literally hundreds of megabytes on real
   world deployments, due to oddly sized large objects not fitting
   nicely into a kmalloc slab.

7-9) We move from an insanely expensive O(n) algorithm to a fast O(1)
     algorithm, and cleanup a massive memory leak in the process, in
     which allowed ips churn would leave danging nodes hanging around
     without cleanup until the interface was removed. The O(1) algorithm
     eliminates packet stalls and high latency issues, in addition to
     bringing operations that took as much as 10 minutes down to less
     than a second.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6fd815bb
    • Jason A. Donenfeld's avatar
      wireguard: allowedips: free empty intermediate nodes when removing single node · bf7b042d
      Jason A. Donenfeld authored 
      When removing single nodes, it's possible that that node's parent is an
empty intermediate node, in which case, it too should be removed.
Otherwise the trie fills up and never is fully emptied, leading to
gradual memory leaks over time for tries that are modified often. There
was originally code to do this, but was removed during refactoring in
2016 and never reworked. Now that we have proper parent pointers from
the previous commits, we can implement this properly.

In order to reduce branching and expensive comparisons, we want to keep
the double pointer for parent assignment (which lets us easily chain up
to the root), but we still need to actually get the parent's base
address. So encode the bit number into the last two bits of the pointer,
and pack and unpack it as needed. This is a little bit clumsy but is the
fastest and less memory wasteful of the compromises. Note that we align
the root struct here to a minimum of 4, because it's embedded into a
larger struct, and we're relying on having the bottom two bits for our
flag, which would only be 16-bit aligned on m68k.

The existing macro-based helpers were a bit unwieldy for adding the bit
packing to, so this commit replaces them with safer and clearer ordinary
functions.

We add a test to the randomized/fuzzer part of the selftests, to free
the randomized tries by-peer, refuzz it, and repeat, until it's supposed
to be empty, and then then see if that actually resulted in the whole
thing being emptied. That combined with kmemcheck should hopefully make
sure this commit is doing what it should. Along the way this resulted in
various other cleanups of the tests and fixes for recent graphviz.

Fixes: e7096c13 ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: default avatarJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bf7b042d
    • Jason A. Donenfeld's avatar
      wireguard: allowedips: allocate nodes in kmem_cache · dc680de2
      Jason A. Donenfeld authored 
      The previous commit moved from O(n) to O(1) for removal, but in the
process introduced an additional pointer member to a struct that
increased the size from 60 to 68 bytes, putting nodes in the 128-byte
slab. With deployed systems having as many as 2 million nodes, this
represents a significant doubling in memory usage (128 MiB -> 256 MiB).
Fix this by using our own kmem_cache, that's sized exactly right. This
also makes wireguard's memory usage more transparent in tools like
slabtop and /proc/slabinfo.

Fixes: e7096c13 ("net: WireGuard secure network tunnel")
Suggested-by: default avatarArnd Bergmann <arnd@arndb.de>
Suggested-by: default avatarMatthew Wilcox <willy@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dc680de2
    • Jason A. Donenfeld's avatar
      wireguard: allowedips: remove nodes in O(1) · f634f418
      Jason A. Donenfeld authored 
      Previously, deleting peers would require traversing the entire trie in
order to rebalance nodes and safely free them. This meant that removing
1000 peers from a trie with a half million nodes would take an extremely
long time, during which we're holding the rtnl lock. Large-scale users
were reporting 200ms latencies added to the networking stack as a whole
every time their userspace software would queue up significant removals.
That's a serious situation.

This commit fixes that by maintaining a double pointer to the parent's
bit pointer for each node, and then using the already existing node list
belonging to each peer to go directly to the node, fix up its pointers,
and free it with RCU. This means removal is O(1) instead of O(n), and we
don't use gobs of stack.

The removal algorithm has the same downside as the code that it fixes:
it won't collapse needlessly long runs of fillers.  We can enhance that
in the future if it ever becomes a problem. This commit documents that
limitation with a TODO comment in code, a small but meaningful
improvement over the prior situation.

Currently the biggest flaw, which the next commit addresses, is that
because this increases the node size on 64-bit machines from 60 bytes to
68 bytes. 60 rounds up to 64, but 68 rounds up to 128. So we wind up
using twice as much memory per node, because of power-of-two
allocations, which is a big bummer. We'll need to figure something out
there.

Fixes: e7096c13 ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: default avatarJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f634f418
    • Jason A. Donenfeld's avatar
      wireguard: allowedips: initialize list head in selftest · 46cfe8ee
      Jason A. Donenfeld authored 
      The randomized trie tests weren't initializing the dummy peer list head,
resulting in a NULL pointer dereference when used. Fix this by
initializing it in the randomized trie test, just like we do for the
static unit test.

While we're at it, all of the other strings like this have the word
"self-test", so add it to the missing place here.

Fixes: e7096c13 ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: default avatarJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      46cfe8ee
    • Jason A. Donenfeld's avatar
      wireguard: peer: allocate in kmem_cache · a4e9f8e3
      Jason A. Donenfeld authored 
      With deployments having upwards of 600k peers now, this somewhat heavy
structure could benefit from more fine-grained allocations.
Specifically, instead of using a 2048-byte slab for a 1544-byte object,
we can now use 1544-byte objects directly, thus saving almost 25%
per-peer, or with 600k peers, that's a savings of 303 MiB. This also
makes wireguard's memory usage more transparent in tools like slabtop
and /proc/slabinfo.

Fixes: 8b5553ac ("wireguard: queueing: get rid of per-peer ring buffers")
Suggested-by: default avatarArnd Bergmann <arnd@arndb.de>
Suggested-by: default avatarMatthew Wilcox <willy@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a4e9f8e3
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7