- 29 Aug, 2011 7 commits
-
-
Daniel Mack authored
commit 15439bde upstream. This fixes faulty outbount packets in case the inbound packets received from the hardware are fragmented and contain bogus input iso frames. The bug has been there for ages, but for some strange reasons, it was only triggered by newer machines in 64bit mode. Signed-off-by:
Daniel Mack <zonque@gmail.com> Reported-and-tested-by:
William Light <wrl@illest.net> Reported-by:
Pedro Ribeiro <pedrib@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Julia Lawall authored
commit 66a89b21 upstream. rs_resp is dynamically allocated in aem_read_sensor(), so it should be freed before exiting in every case. This collects the kfree and the return at the end of the function. Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by:
-
Chas Williams authored
commit a08af810 upstream. Reported-by:
Pascal Hambourg <pascal@plouf.fr.eu.org> Signed-off-by:
Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Vijay Chavan authored
commit e4685617 upstream. A new device ID pair is added for Qualcomm Modem present in Sagemcom's HiLo3G module. Signed-off-by:
Vijay Chavan <VijayChavan007@gmail.com> Signed-off-by:
-
Nick Bowler authored
commit a871e4f5 upstream. Connecting the V2M to a Linux host results in a constant stream of errors spammed to the console, all of the form sd 1:0:0:0: ioctl_internal_command return code = 8070000 : Sense Key : 0x4 [current] : ASC=0x0 ASCQ=0x0 The errors appear to be otherwise harmless. Add an unusual_devs entry which eliminates all of the error messages. Signed-off-by:
Nick Bowler <nbowler@elliptictech.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Maxim Nikulin authored
commit 4f1a7a3e upstream. Assign operator instead of equality test in the usbtmc_ioctl_abort_bulk_in() function. Signed-off-by:
Maxim A. Nikulin <M.A.Nikulin@gmail.com> Signed-off-by:
-
JiSheng Zhang authored
commit 6768458b upstream. Software should set XHCI_HC_OS_OWNED bit to request ownership of xHC. This patch should be backported to kernels as far back as 2.6.31. Signed-off-by:
JiSheng Zhang <jszhang3@gmail.com> Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
- 16 Aug, 2011 7 commits
-
-
Greg Kroah-Hartman authored
-
Anton Blanchard authored
commit bed9a315 upstream. On a box with 8TB of RAM the MMU hashtable is 64GB in size. That means we have 4G PTEs. pSeries_lpar_hptab_clear was using a signed int to store the index which will overflow at 2G. Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Anton Blanchard authored
commit 966728dd upstream. I have a box that fails in OF during boot with: DEFAULT CATCH!, exception-handler=fff00400 at %SRR0: 49424d2c4c6f6768 %SRR1: 800000004000b002 ie "IBM,Logh". OF got corrupted with a device tree string. Looking at make_room and alloc_up, we claim the first chunk (1 MB) but we never claim any more. mem_end is always set to alloc_top which is the top of our available address space, guaranteeing we will never call alloc_up and claim more memory. Also alloc_up wasn't setting alloc_bottom to the bottom of the available address space. This doesn't help the box to boot, but we at least fail with an obvious error. We could relocate the device tree in a future patch. Signed-off-by:
-
Daniel Mack authored
commit f4389489 upstream. Signed-off-by:
Renato <naretobh@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit 0584ffa5 upstream. A slave-timer instance has no timer reference, and this results in NULL-dereference at stopping the timer, typically called at closing the device. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=40682Signed-off-by:
-
David S. Miller authored
Computers have become a lot faster since we compromised on the partial MD4 hash which we use currently for performance reasons. MD5 is a much safer choice, and is inline with both RFC1948 and other ISS generators (OpenBSD, Solaris, etc.) Furthermore, only having 24-bits of the sequence number be truly unpredictable is a very serious limitation. So the periodic regeneration and 8-bit counter have been removed. We compute and use a full 32-bit sequence number. For ipv6, DCCP was found to use a 32-bit truncated initial sequence number (it needs 43-bits) and that is fixed here as well. Reported-by:
Dan Kaminsky <dan@doxpara.com> Tested-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
David S. Miller authored
We are going to use this for TCP/IP sequence number and fragment ID generation. Signed-off-by:
-
- 08 Aug, 2011 26 commits
-
-
Greg Kroah-Hartman authored
-
chas williams - CONTRACTOR authored
commit 2e302ebf upstream. in routed mode, we don't have a hardware address so netdev_ops doesnt need to validate our hardware address via .ndo_validate_addr Reported-by:
Manuel Fuentes <mfuentes@agenciaefe.com> Signed-off-by:
-
Peter Zijlstra authored
The below patch is for -stable only, upstream has a much larger patch that contains the below hunk in commit a8b0ca17 Vince found that under certain circumstances software event overflows go wrong and deadlock. Avoid trying to delete a timer from the timer callback. Reported-by:
Vince Weaver <vweaver1@eecs.utk.edu> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Alasdair G Kergon authored
commit d15b774c upstream. Destroy _minor_idr when unloading the core dm module. (Found by kmemleak.) Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
Mike Snitzer authored
commit 286f367d upstream. Avoid dereferencing a NULL pointer if the number of feature arguments supplied is fewer than indicated. Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Julia Lawall authored
commit ca9380fd upstream. Convert array index from the loop bound to the loop index. A simplified version of the semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e1,e2,ar; @@ for(e1 = 0; e1 < e2; e1++) { <... ar[ - e2 + e1 ] ...> } // </smpl> Signed-off-by:
-
Vasiliy Kulikov authored
commit 1d1221f3 upstream. /proc/PID/io may be used for gathering private information. E.g. for openssh and vsftpd daemons wchars/rchars may be used to learn the precise password length. Restrict it to processes being able to ptrace the target process. ptrace_may_access() is needed to prevent keeping open file descriptor of "io" file, executing setuid binary and gathering io information of the setuid'ed process. Signed-off-by:
Vasiliy Kulikov <segoon@openwall.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dan Rosenberg authored
commit 21c5977a upstream. Fix several security issues in Alpha-specific syscalls. Untested, but mostly trivial. 1. Signedness issue in osf_getdomainname allows copying out-of-bounds kernel memory to userland. 2. Signedness issue in osf_sysinfo allows copying large amounts of kernel memory to userland. 3. Typo (?) in osf_getsysinfo bounds minimum instead of maximum copy size, allowing copying large amounts of kernel memory to userland. 4. Usage of user pointer in osf_wait4 while under KERNEL_DS allows privilege escalation via writing return value of sys_wait4 to kernel memory. Signed-off-by:
Dan Rosenberg <drosenberg@vsecurity.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Alexey Dobriyan authored
commit d5aa407f upstream. Same stuff as in ip_gre patch: receive hook can be called before netns setup is done, oopsing in net_generic(). Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Alexey Dobriyan authored
commit e924960d upstream. Signed-off-by:
-
Alexey Dobriyan authored
commit c2892f02 upstream. GRE protocol receive hook can be called right after protocol addition is done. If netns stuff is not yet initialized, we're going to oops in net_generic(). This is remotely oopsable if ip_gre is compiled as module and packet comes at unfortunate moment of module loading. Signed-off-by:
-
Jeff Layton authored
commit 24e6cf92 upstream. It's possible for a cifsSesInfo struct to have a NULL password, so we need to check for that prior to running strncmp on it. Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <sfrench@us.ibm.com> Signed-off-by:
-
Jeff Layton authored
commit fc87a406 upstream. cifs_find_smb_ses assumes that the vol->password field is a valid pointer, but that's only the case if a password was passed in via the options string. It's possible that one won't be if there is no mount helper on the box. Reported-by:
diabel <gacek-2004@wp.pl> Signed-off-by:
-
Jeff Layton authored
commit 4ff67b72 upstream. This patch replaces the earlier patch by the same name. The only difference is that MAX_PASSWORD_SIZE has been increased to attempt to match the limits that windows enforces. Do a better job of matching sessions by authtype. Matching by username for a Kerberos session is incorrect, and anonymous sessions need special handling. Also, in the case where we do match by username, we also need to match by password. That ensures that someone else doesn't "borrow" an existing session without needing to know the password. Finally, passwords can be longer than 16 bytes. Bump MAX_PASSWORD_SIZE to 512 to match the size that the userspace mount helper allows. Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 5b2745db (commit 02e35228 upstream) This should have only been commited on .38 and newer, not older kernels like this one, sorry. Cc: Tejun Heo <tj@kernel.org> Cc: David Zeuthen <zeuthen@gmail.com> Cc: Martin Pitt <martin.pitt@ubuntu.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jens Axboe <jaxboe@fusionio.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Thomas Gleixner authored
(imported from commit v2.6.37-rc5-64-gf1c1807) commit 995bd3bb (x86: Hpet: Avoid the comparator readback penalty) chose 8 HPET cycles as a safe value for the ETIME check, as we had the confirmation that the posted write to the comparator register is delayed by two HPET clock cycles on Intel chipsets which showed readback problems. After that patch hit mainline we got reports from machines with newer AMD chipsets which seem to have an even longer delay. See http://thread.gmane.org/gmane.linux.kernel/1054283 and http://thread.gmane.org/gmane.linux.kernel/1069458 for further information. Boris tried to come up with an ACPI based selection of the minimum HPET cycles, but this failed on a couple of test machines. And of course we did not get any useful information from the hardware folks. For now our only option is to chose a paranoid high and safe value for the minimum HPET cycles used by the ETIME check. Adjust the minimum ns value for the HPET clockevent accordingly. Reported-Bistected-and-Tested-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <alpine.LFD.2.00.1012131222420.2653@localhost6.localdomain6> Cc: Simon Kirby <sim@hostway.ca> Cc: Borislav Petkov <bp@alien8.de> Cc: Andreas Herrmann <Andreas.Herrmann3@amd.com> Cc: John Stultz <johnstul@us.ibm.com> Signed-off-by:
Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by:
-
Thomas Gleixner authored
(imported from commit v2.6.36-rc4-167-g995bd3bb) Due to the overly intelligent design of HPETs, we need to workaround the problem that the compare value which we write is already behind the actual counter value at the point where the value hits the real compare register. This happens for two reasons: 1) We read out the counter, add the delta and write the result to the compare register. When a NMI or SMI hits between the read out and the write then the counter can be ahead of the event already 2) The write to the compare register is delayed by up to two HPET cycles in certain chipsets. We worked around this by reading back the compare register to make sure that the written value has hit the hardware. For certain ICH9+ chipsets this can require two readouts, as the first one can return the previous compare register value. That's bad performance wise for the normal case where the event is far enough in the future. As we already know that the write can be delayed by up to two cycles we can avoid the read back of the compare register completely if we make the decision whether the delta has elapsed already or not based on the following calculation: cmp = event - actual_count; If cmp is less than 8 HPET clock cycles, then we decide that the event has happened already and return -ETIME. That covers the above #1 and #2 problems which would cause a wait for HPET wraparound (~306 seconds). Signed-off-by:
Nix <nix@esperi.org.uk> Tested-by:
Artur Skawina <art.08.09@gmail.com> Cc: Damien Wyart <damien.wyart@free.fr> Tested-by:
John Drescher <drescherjm@gmail.com> Cc: Venkatesh Pallipadi <venki@google.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Tested-by:
Borislav Petkov <borislav.petkov@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <alpine.LFD.2.00.1009151500060.2416@localhost6.localdomain6> Signed-off-by:
-
Anton Blanchard authored
commit 51d33021 upstream. Return -EAGAIN when we get H_BUSY back from the hypervisor. This makes the hvc console driver retry, avoiding dropped printks. Signed-off-by:
-
Alan Stern authored
commit e04f5f7e upstream. This patch (as1480) fixes a rather obscure bug in ehci-hcd. The qh_update() routine needs to know the number and direction of the endpoint corresponding to its QH argument. The number can be taken directly from the QH data structure, but the direction isn't stored there. The direction is taken instead from the first qTD linked to the QH. However, it turns out that for interrupt transfers, qh_update() gets called before the qTDs are linked to the QH. As a result, qh_update() computes a bogus direction value, which messes up the endpoint toggle handling. Under the right combination of circumstances this causes usb_reset_endpoint() not to work correctly, which causes packets to be dropped and communications to fail. Now, it's silly for the QH structure not to have direct access to all the descriptor information for the corresponding endpoint. Ultimately it may get a pointer to the usb_host_endpoint structure; for now, adding a copy of the direction flag solves the immediate problem. This allows the Spyder2 color-calibration system (a low-speed USB device that sends all its interrupt data packets with the toggle set to 0 and hance requires constant use of usb_reset_endpoint) to work when connected through a high-speed hub. Thanks to Graeme Gill for supplying the hardware that allowed me to track down this bug. Signed-off-by:
Graeme Gill <graeme@argyllcms.com> Signed-off-by:
-
Sergei Shtylyov authored
commit 81463c1d upstream. MAX4967 USB power supply chip we use on our boards signals over-current when power is not enabled; once it's enabled, over-current signal returns to normal. That unfortunately caused the endless stream of "over-current change on port" messages. The EHCI root hub code reacts on every over-current signal change with powering off the port -- such change event is generated the moment the port power is enabled, so once enabled the power is immediately cut off. I think we should only cut off power when we're seeing the active over-current signal, so I'm adding such check to that code. I also think that the fact that we've cut off the port power should be reflected in the result of GetPortStatus request immediately, hence I'm adding a PORTSCn register readback after write... Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by:
-
J. Bruce Fields authored
commit ebc63e53 upstream. After commit 3262c816 "[PATCH] knfsd: split svc_serv into pools", svc_delete_xprt (then svc_delete_socket) no longer removed its xpt_ready (then sk_ready) field from whatever list it was on, noting that there was no point since the whole list was about to be destroyed anyway. That was mostly true, but forgot that a few svc_xprt_enqueue()'s might still be hanging around playing with the about-to-be-destroyed list, and could get themselves into trouble writing to freed memory if we left this xprt on the list after freeing it. (This is actually functionally identical to a patch made first by Ben Greear, but with more comments.) Cc: gnb@fmeh.org Reported-by:
Ben Greear <greearb@candelatech.com> Tested-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Jan Kara authored
commit ad95c5e9 upstream. Block allocation is called from two places: ext3_get_blocks_handle() and ext3_xattr_block_set(). These two callers are not necessarily synchronized because xattr code holds only xattr_sem and i_mutex, and ext3_get_blocks_handle() may hold only truncate_mutex when called from writepage() path. Block reservation code does not expect two concurrent allocations to happen to the same inode and thus assertions can be triggered or reservation structure corruption can occur. Fix the problem by taking truncate_mutex in xattr code to serialize allocations. CC: Sage Weil <sage@newdream.net> Reported-by:
Fyodor Ustinov <ufm@ufm.su> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Dan Rosenberg authored
commit 0d0138eb upstream. Prevent an arbitrary kernel read. Check the user pointer with access_ok() before copying data in. [akpm@linux-foundation.org: s/EIO/EFAULT/] Signed-off-by:
-
Stephen M. Cameron authored
commit 07d0c38e upstream. Most smartarrays will tolerate it, but some new ones don't. Signed-off-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Note: this is a regression caused by commit 1ddd5049Signed-off-by:
Jens Axboe <jaxboe@fusionio.com> Signed-off-by:
-
Chris Wright authored
commit 864d296c upstream. The function pci_enable_ari() may mistakenly set the downstream port of a v1 PCIe switch in ARI Forwarding mode. This is a PCIe v2 feature, and with an SR-IOV device on that switch port believing the switch above is ARI capable it may attempt to use functions 8-255, translating into invalid (non-zero) device numbers for that bus. This has been seen to cause Completion Timeouts and general misbehaviour including hangs and panics. Acked-by:
Don Dutile <ddutile@redhat.com> Tested-by:
Chris Wright <chrisw@sous-sol.org> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Michael Neuling authored
commit 63f21a56 upstream. The existing code it pretty ugly. How about we clean it up even more like this? From: Anton Blanchard <anton@samba.org> We check for timeout expiry in the outer loop, but we also need to check it in the inner loop or we can lock up forever waiting for a CPU to hit real mode. Signed-off-by:
-
