- 10 May, 2017 10 commits
-
-
Ville Syrjälä authored
Rename the VLV/CHV max_level->num_levels helper to have an intel_ prefix since it's not VLV/CHV specific and I'll want to use it on other platforms as well. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-4-ville.syrjala@linux.intel.comReviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Ville Syrjälä authored
Seeing the display FIFO sizes at driver load time doesn't really provide anything useful for us, so let's just drop the debug message. One can always use eg. intel_watermarks to dump out the hardware settings prior to loading the driver. Signed-off-by:
-
Ville Syrjälä authored
Rename some of the vlv wm functions to reflect the fact that they operate on the "raw" watermarks. Signed-off-by:
-
Imre Deak authored
This looks like a left-over from enabling work. The spec defines CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED as reserved set, so follow this in the programming. v2: - Follow the spec to set CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Imre Deak authored
On GEN8+ (not counting CHV) the calculation can in theory result in an incorrect sign extension with all upper bits set. In practice this is unlikely to happen since it would require 4GB of stolen memory set aside. For consistency still prevent the sign extension explicitly everywhere. Signed-off-by:
-
Imre Deak authored
An error from intel_get_pipe_from_connector() would mean a bug somewhere else, but we still should check for it to prevent some other more obscure bug later. v2: - Fall back to a reasonable default instead of bailing out in case of error. (Jani) v3: - Fix s/PIPE_INVALID/INVALID_PIPE/ typo. (Jani) v4: - Fix bogus bracing around WARN() condition. (Ville) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1494408113-379-5-git-send-email-imre.deak@intel.com
-
Imre Deak authored
Even though an error from these functions isn't fatal we still want to have a diagnostic message about it. v2: - Don't do assignments in if statements. (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Imre Deak authored
The current code assumes that 'enhancements' won't change in case of an error, but this isn't guaranteed. Fix things by treating any error as a lack of the given capability. v2: - Remove the now redundant init of enhancements. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Imre Deak authored
The assumptions of these users of drm_dp_dpcd_readb() is that the passed in output buffer won't change in case of error, but this isn't guaranteed. Fix this by treating any error as the lack of the given capability. In case of DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP an error would leave the buffer uninitialized even with the above assumption. Signed-off-by:
-
Imre Deak authored
The current code looks like a typo, the specification calls for setting bits 31:24 to 0x8C, while preserving bits 23:0. Fix things accordingly. I'm not aware of the typo causing a real problem, so the fix is only for consistency. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
- 09 May, 2017 2 commits
-
-
Mika Kuoppala authored
The assumption is that the registers offsets are identical as with skl. Also all the published kbl firmwares support the debug registers. So let kbl show the debug counts. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100975 Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
-
Michal Wajdeczko authored
In order to allow use of e.g. forcewake_domains in a other feature headers included from the top of i915_drv.h, move all uncore related definitions into their own header. v2: move __mask_next_bit macro to utils header (Mika) Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Suggested-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
-
- 08 May, 2017 1 commit
-
-
Geliang Tang authored
Use memdup_user_nul() helper instead of open-coding to simplify the code. Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/6baf3aa45d0b5e0fd016b508bac905ebf8443aac.1493779294.git.geliangtang@gmail.com
-
- 05 May, 2017 1 commit
-
-
Ville Syrjälä authored
Turns out our skills in decoding the CLKCFG register weren't good enough. On this particular elk the answer we got was 400 MHz when in reality the clock was running at 266 MHz, which then caused us to program a bogus AUX clock divider that caused all AUX communication to fail. Sadly the docs are now in bit heaven, so the fix will have to be based on empirical evidence. Using another elk machine I was able to frob the FSB frequency from the BIOS and see how it affects the CLKCFG register. The machine seesm to use a frequency of 266 MHz by default, and fortunately it still boot even with the 50% CPU overclock that we get when we bump the FSB up to 400 MHz. It turns out the actual FSB frequency and the register have no real link whatsoever. The register value is based on some straps or something, but fortunately those too can be configured from the BIOS on this board, although it doesn't seem to respect the settings 100%. In the end I was able to derive the following relationship: BIOS FSB / strap | CLKCFG ------------------------- 200 | 0x2 266 | 0x0 333 | 0x4 400 | 0x4 So only the 200 and 400 MHz cases actually match how we're currently decoding that register. But as the comment next to some of the defines says, we have been just guessing anyway. So let's fix things up so that at least the 266 MHz case will work correctly as that is actually the setting used by both the buggy machine and my test machine. The fact that 333 and 400 MHz BIOS settings result in the same register value is a little disappointing, as that means we can't tell them apart. However, according to the gmch datasheet for both elk and ctg 400 Mhz is not even a supported FSB frequency, so I'm going to make the assumption that we should decode it as 333 MHz instead. Cc: stable@vger.kernel.org Cc: Tomi Sarvela <tomi.p.sarvela@intel.com> Reported-by:
Tomi Sarvela <tomi.p.sarvela@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100926Signed-off-by:
-
- 04 May, 2017 4 commits
-
-
Chris Wilson authored
Typically, there is space available within the ring and if not we have to wait (by definition a slow path). Rearrange the code to reduce the number of branches and stack size for the hotpath, accomodating a slight growth for the wait. v2: Fix the new assert that packets are not larger than the actual ring. v3: Make the parameters unsigned as well to make usage. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Chris Wilson authored
Some callers immediately want to know the current ring->space after calling intel_ring_update_space(), which we can freely provide via the return parameter. Signed-off-by:
-
Chris Wilson authored
Exploit the power-of-two ring size to compute the space across the wraparound using a mask rather than a if. Convert to unsigned integers so the operation is well defined. References: https://bugs.freedesktop.org/show_bug.cgi?id=99671Signed-off-by:
-
Chris Wilson authored
Since unifying ringbuffer/execlist submission to use engine->pin_context, we ensure that the intel_ring is available before we start constructing the request. We can therefore move the assignment of the request->ring to the central i915_gem_request_alloc() and not require it in every engine->request_alloc() callback. Another small step towards simplification (of the core, but at a cost of handling error pointers in less important callers of engine->pin_context). v2: Rearrange a few branches to reduce impact of PTR_ERR() on gcc's code generation. Signed-off-by:
Oscar Mateo <oscar.mateo@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170504093308.4137-1-chris@chris-wilson.co.uk
-
- 03 May, 2017 22 commits
-
-
Chris Wilson authored
Since kmap allows us to block we can pin the pages and use our normal page lookup routine making the implementation simple, or as some might say quick and dirty. Testcase: igt/drv_selftest/dmabuf Testcase: igt/prime_rw Signed-off-by:
-
Daniel Vetter authored
Backmerge the main drm-next pull to sync up. Chris also pointed out that commit ade0b0c9 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Sat Apr 22 09:15:37 2017 +0100 drm/i915: Confirm the request is still active before adding it to the await is double-applied in the git merge, so make sure we get this right. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com>
-
Ville Syrjälä authored
Now that everything is in place let's register a PCM device for each port of the display engine. This will make it possible to actually output audio to multiple displays at the same time. And it avoids modesets on unrelated displays from clobbering up the ELD and whatnot for the display currently doing the playback. v2: Add a PCM per port instead of per pipe v3: Fix off by one error with port numbers (Pierre-Louis) Fix .notify_audio_lpe() prototype (Pierre-Louis) Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:Takashi Iwai <tiwai@suse.de>
-
Ville Syrjälä authored
To allow multiple PCM devices to be registered for the LPE audio card, split the private data into card and PCM specific chunks. For now we'll stick to just one PCM device as before. v2: Rework to do a pcm device per port instead of per pipe Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
In preparation for register a PCM device for each pipe adjust link up the ctl elements with the corresponding PCM device. Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
Split the LPE audio platform data into a port specific chunk and device specific chunk. Eventually we'll have a port specific chunk for each port, but for now we'll stick to just one. We'll also get rid of the intel_hdmi_lpe_audio_eld structure which doesn't seem to have any real reason to exist. v2: Organize per port instead of per pipe Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
Shuffle the arguments to intel_lpe_audio_notify() around a bit. Pipe and port being the most important things, so let's put the first, and thre rest can come in as is. Also constify the eld argument. Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
We can determine that the pipe was shut down from pipe<0, so there's no point in duplicating that information as 'hdmi_connected'. v2: Use pipe<0 instead of port<0 as we'll want to do per-port PCM devices later Initialize pipe to -1 to inidicate inactive initial state Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: -
Ville Syrjälä authored
There's no need to distinguish between the DP link rate and HDMI TMDS clock for the purposes of the LPE audio. Both are actually the same thing more or less, which is the link symbol clock. So let's just call the thing ls_clock and simplify the code. Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
The pending_notify flag in the LPE audio platform data is pointless, actually unused. So let's kill it off. v2: Fix typo in patch subject Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
vlv_display_irq_postinstall() enables the LPE audio interrupts regardless of whether the LPE audio irq chip has masked/unmasked them. Also the irqchip masking/unmasking doesn't consider the state of the display power well or the device, and hence just leads to dmesg spew when it tries to access the hardware while it's powered down. If the current way works, then we don't need to do anything in the mask/unmask hooks. If it doesn't work, well, then we'd need to properly track whether the irqchip has masked/unmasked the interrupts when we enable display interrupts. And the mask/unmask hooks would need to check whether display interrupts are even enabled before frobbing with he registers. So let's just assume the current way works and neuter the mask/unmask hooks. Also clean up vlv_display_irq_postinstall() a bit and stop it from trying to unmask/enable the LPE C interrupt on VLV since it doesn't exist. Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
Clear the notify function pointer in the platform data before we tear down the driver. Otherwise i915 would end up calling a stale function pointer and possibly explode. Cc: stable@vger.kernel.org Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
Not calling pm_runtime_enable() means that runtime PM can't be enabled at all via sysfs. So we definitely need to call it from somewhere. Calling it from the driver seems like a bad idea because it would have to be paired with a pm_runtime_disable() at driver unload time, otherwise the core gets upset. Also if there's no LPE audio driver loaded then we couldn't runtime suspend i915 either. So it looks like a better plan is to call it from i915 when we register the platform device. That seems to match how pci generally does things. I cargo culted the pm_runtime_forbid() and pm_runtime_set_active() calls from pci as well. The exposed runtime PM API is massive an thorougly misleading, so I don't actually know if this is how you're supposed to use the API or not. But it seems to work. I can now runtime suspend i915 again with or without the LPE audio driver loaded, and reloading the LPE audio driver also seems to work. Note that powertop won't auto-tune runtime PM for platform devices, which is a little annoying. So I'm not sure that leaving runtime PM in "on" mode by default is the best choice here. But I've left it like that for now at least. Also remove the comment about there not being much benefit from LPE audio runtime PM. Not allowing runtime PM blocks i915 runtime PM, which will also block s0ix, and that could have a measurable impact on power consumption. Cc: stable@vger.kernel.org Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Fixes: 0b6b524f ("ALSA: x86: Don't enable runtime PM as default") Signed-off-by:
-
Chris Wilson authored
Rather than use a global modparam, we can just check to see if the engine has semaphores configured upon it. Signed-off-by:
-
Chris Wilson authored
As we may unwind the requests, even though the request we are awaiting has a global_seqno that seqno may be revoked during the await and so we can not reliably use it as a barrier for all future awaits on the same timeline. Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-6-chris@chris-wilson.co.uk
-
Chris Wilson authored
With the addition of the inter-context intel_time.sync map, having a very similar sync_seqno[] is confusing. Aide the reader by denoting that this is a pre-allocated array for storing semaphore sync points wrt to the global seqno. Signed-off-by:
-
Chris Wilson authored
Track the latest fence waited upon on each context, and only add a new asynchronous wait if the new fence is more recent than the recorded fence for that context. This requires us to filter out unordered timelines, which are noted by DMA_FENCE_NO_CONTEXT. However, in the absence of a universal identifier, we have to use our own i915->mm.unordered_timeline token. v2: Throw around the debug crutches v3: Inline the likely case of the pre-allocation cache being full. v4: Drop the pre-allocation support, we can lose the most recent fence in case of allocation failure -- it just means we may emit more awaits than strictly necessary but will not break. v5: Trim allocation size for leaf nodes, they only need an array of u32 not pointers. v6: Create mock_timeline to tidy selftest writing v7: s/intel_timeline_sync_get/intel_timeline_sync_is_later/ (Tvrtko) v8: Prune the stale sync points when we idle. v9: Include a small benchmark in the kselftests v10: Separate the idr implementation into its own compartment. (Tvrkto) v11: Refactor igt_sync kselftests to avoid deep nesting (Tvrkto) v12: __sync_leaf_idx() to assert that p->height is 0 when checking leaves v13: kselftests to investigate struct i915_syncmap itself (Tvrtko) v14: Foray into ascii art graphs v15: Take into account that the random lookup/insert does 2 prng calls, not 1, when benchmarking, and use for_each_set_bit() (Tvrtko) v16: Improved ascii art Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-4-chris@chris-wilson.co.uk
-
Chris Wilson authored
Currently we filter out repeated use of the same timeline in the low level i915_gem_request_await_request(), after having added the dependency on the old request. However, we can lift this to i915_gem_request_await_dma_fence() (before the dependency is added) using the observation that requests along the same timeline are explicitly ordered via i915_add_request (along with the dependencies). Signed-off-by:
-
Chris Wilson authored
By first unwrapping an incoming fence-array into its child fences, we can simplify the internal branching, and so avoid triggering a potential bug in the next patch when not squashing the child fences on the same timeline. It will also have the advantage of keeping the (top-level) fence arrays out of any fence/timeline caching since these are unordered timelines but with a random context id. Signed-off-by:
-
Chris Wilson authored
2 clflushes on two different objects are not ordered, and so do not belong to the same timeline (context). Either we use a unique context for each, or we reserve a special global context to mean unordered. Ideally, we would reserve 0 to mean unordered (DMA_FENCE_NO_CONTEXT) to have the same semantics everywhere. Signed-off-by:
-
Mika Kuoppala authored
Replace the handcrafter loop when checking for fifo slots with atomic wait for. This brings this wait in line with the other waits on register access. We also get a readable timeout constraint, so make it to fail after 10ms. Chris suggested that we should fail silently as the fifo debug handler, now attached to unclaimed mmio handling, will take care of the possible errors at later stage. Note that the decision to wait was changed so that we avoid allocating the first reserved entry. Nor do we reduce the count if we fail the wait, removing the possiblity to wrap the count if the hw fifo returned zero. v2: remove unclaimed check on timeout (Chris) v3: use void return (Chris) References: https://bugs.freedesktop.org/show_bug.cgi?id=100247Signed-off-by:
-
Mika Kuoppala authored
Remove the per-mmio checking of the FIFO debug register into the common conditional mmio debug handling. Based on patch from Chris Wilson. v2: postpone warn on fifodbg for unclaimed reg debugs Signed-off-by:
-
