- 30 Jan, 2020 19 commits
-
-
Michael Srba authored
Add driver for Samsung AMS452EF01 AMOLED panel, which makes use of their S6E88A0 controller. Signed-off-by:
Michael Srba <Michael.Srba@seznam.cz> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> [fixed checkpatch warnings, added changelog] Link: https://patchwork.freedesktop.org/patch/msgid/20200130203555.316-2-michael.srba@seznam.cz
-
Michael Srba authored
This patch adds dts bindings for Samsung AMS452EF01 AMOLED panel, which makes use of their S6E88A0 controller. Signed-off-by:
-
Marian-Cristian Rotariu authored
EDT ET043080DH6-GP is a 4.3" WQVGA 480x272 RGB LCD panel used on the iWave Generic SODIMM Development Platform. Changes in v2: -added mandatory .connector_type field -changed the .bus_format MEDIA_BUS_FMT_RGB666_1X18 Signed-off-by:
Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by:
-
Marian-Cristian Rotariu authored
Document the Emerging Display Technology Corp. (EDT) ETM043080DH6-GP display, which is a 480x272 4.3" TFT display with capacitive touchscreen. Changes in v2: -modify proper bindings file Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. This would apply to xen, but xen has its own vblank logic. To avoid interfering with the atomic helpers, disable automatic vblank events explicitly. v5: * update comment v4: * separate commit from core vblank changes Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-16-tzimmermann@suse.de
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
As udl does not initialize vblanking, atomic helpers initialize the value of struct drm_crtc_state.no_vblank to be true. No need to set it from within the driver. Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
As ast does not initialize vblanking, atomic helpers initialize the value of struct drm_crtc_state.no_vblank to be true. No need to set it from within the driver. Signed-off-by:
-
Thomas Zimmermann authored
The atomic helpers automatically send out fake VBLANK events if no vblanking has been initialized. Remove the sending code from the driver. v4: * separate commit from core vblank changes Signed-off-by:
-
Thomas Zimmermann authored
At the end of a commit, atomic helpers can generate a fake VBLANK event automatically. Originally implemented for writeback connectors, the functionality can be used by any driver and/or hardware without proper VBLANK interrupt. The patch updates the documentation to make this behaviour official: settings struct drm_crtc_state.no_vblank to true enables automatic generation of fake VBLANK events. The new interface drm_dev_has_vblank() returns true if vblanking has been initialized for a device, or false otherwise. Atomic helpers use this function when initializing no_vblank in the CRTC state in drm_atomic_helper_check_modeset(). If vblanking has been initialized for a device, no_blank is disabled. Otherwise it's enabled. Hence, atomic helpers will automatically send out fake VBLANK events with any driver that did not initialize vblanking. v5: * more precise documentation and commit message v4: * replace drm_crtc_has_vblank() with drm_dev_has_vblank() * add drm_dev_has_vblank() in this patch * move driver changes into separate patches v3: * squash all related changes patches into this patch Signed-off-by:
-
- 29 Jan, 2020 1 commit
-
-
Daniel Vetter authored
vmwgfx stopped using them. With the drm device model that we've slowly evolved over the past few years master status essentially controls access to display resources, and nothing else. Since that's a pure access permission check drivers should have no need at all to track additional state on a per file basis. Aside: For cleanup and restoring kernel-internal clients the grand plan is to move everyone over to drm_client and drm_master_internal_acquire/release, like the generic fbdev code already does. That should get rid of most ->lastclose implementations, and I think also subsumes any processing vmwgfx does in master_set/drop. Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Cc: "Thomas Hellström (VMware)" <thomas_os@shipmail.org> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200127100203.1299322-1-daniel.vetter@ffwll.ch
-
- 28 Jan, 2020 7 commits
-
-
Daniel Vetter authored
Oops. Fixes: 9edbf1fa ("drm: Add API for capturing frame CRCs") Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821203835.18314-1-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Checking both is one too much, so wrap a WARN_ON around it to stope the copypasta. Reviewed-by:
Rodrigo Siqueira <rodrigosiqueira@gmail.com> Tested-by:
-
Daniel Vetter authored
Checking both is one too much, so wrap a WARN_ON around it to stope the copypasta. Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Daniel Vetter authored
Checking both is one too much, so wrap a WARN_ON around it to stope the copypasta. Reviewed-by:
-
Daniel Vetter authored
Checking both is one too much, so wrap a WARN_ON around it to stope the copypasta. Reviewed-by:
-
Daniel Vetter authored
Checking both is one too much, so wrap a WARN_ON around it to stope the copypasta. Acked-by:
-
Daniel Vetter authored
It's frankly a mess, and the confusion around plane_state->crtc/fb that I fixed up in this series is the least of the problems. Add a todo as a future note of how this could be done a lot better, and with a lot less driver confusion. Acked-by:
-
- 27 Jan, 2020 10 commits
-
-
Jyri Sarha authored
Add entry for tidss DRM driver. Version history: v2: no change v3: - Move tidss entry after omapdrm - Add "T: git git://anongit.freedesktop.org/drm/drm-misc" v4: no change v5: no change v6: no change v7: no change v8: - Add Reviewed-by: Benoit Parrot <bparrot@ti.com> v9: - Add Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:Jyri Sarha <jsarha@ti.com> Reviewed-by:
Benoit Parrot <bparrot@ti.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/c22f7aa31af09cd4adcca6b1a6b0721d9429f055.1580129724.git.jsarha@ti.com
-
Jyri Sarha authored
This patch adds a new DRM driver for Texas Instruments DSS IPs used on Texas Instruments Keystone K2G, AM65x, and J721e SoCs. The new DSS IP is a major change to the older DSS IP versions, which are supported by the omapdrm driver. While on higher level the Keystone DSS resembles the older DSS versions, the registers are completely different and the internal pipelines differ a lot. DSS IP found on K2G is an "ultra-light" version, and has only a single plane and a single output. The K3 DSS IPs are found on AM65x and J721E SoCs. AM65x DSS has two video ports, one full video plane, and another "lite" plane without scaling support. J721E has 4 video ports, 2 video planes and 2 lite planes. AM65x DSS has also an integrated OLDI (LVDS) output. Version history: v2: - rebased on top of drm-next-2019-11-27 - sort all include lines in all files - remove all include <drm/drmP.h> - remove select "select VIDEOMODE_HELPERS" - call dispc_vp_setup() later in tidss_crtc_atomic_flush() (there is no to call it in new modeset case as it is also called in vp_enable()) - change probe sequence and drm_device allocation (follow example in drm_drv.c) - use __maybe_unused instead of #ifdef for pm functions - remove "struct drm_fbdev_cma *fbdev;" from driver data - check panel connector type before connecting it v3: no change v4: no change v5: - remove fifo underflow irq handling, it is not an error and it should be used for debug purposes only - memory tuning, prefetch plane fifo up to high-threshold value to minimize possibility of underflows. v6: - Check CTM and gamma support from dispc_features when creating crtc - Implement CTM support for k2g and fix k3 CTM implementation - Remove gamma property persistence and always write color properties in a new modeset v7: - Fix checkpatch.pl --strict issues - Rebase on top of drm-misc-next-2020-01-10 v8: - Remove idle debug prints from dispc_init() - Add Reviewed-by: Benoit Parrot <bparrot@ti.com> v9: - Rename dispc_write_irqenable() to dispc_set_irqenable() to avoid conflict exported omapfb function with same name - Add Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Co-developed-by: -
Jyri Sarha authored
Add dt-schema yaml bindig for J721E DSS, J721E version TI Keystone Display SubSystem. Version history: v2: no change v3: - reg-names: "wp" -> "wb" - Add ports node - Add includes to dts example - reindent dts example v4: - Add descriptions to reg, clocks, and interrupts properties - Remove minItems when its value is the same as maxItems value v5: - itemize reg, clocks and interrupts properties' descriptions - there is no "vp" reg-name, only "wb" for write back v6: - Add Reviewed-by: from Rob Herring <robh@kernel.org> and Benoit Parrot <bparrot@ti.com> v7: no change v8: no change v9: no change Signed-off-by:Rob Herring <robh@kernel.org> Reviewed-by:
-
Jyri Sarha authored
Add dt-schema yaml bindig for AM65x DSS, AM65x version TI Keystone Display SubSystem. Version history: v2: no change v3: - Add ports node - use allOf in ti,am65x-oldi-io-ctrl to add both $ref and maxItems - Add includes to dts example - reindent dts example v4: - Add descriptions to reg and clocks properties - Remove minItems when its value is the same as maxItems value v5: - itemize reg and clocks properties' descriptions v6: - Add Reviewed-by: from Rob Herring <robh@kernel.org> and Benoit Parrot <bparrot@ti.com> v7: no change v8: no change Signed-off-by: -
Jyri Sarha authored
Add dt-schema yaml bindig for K2G DSS, an ultra-light version of TI Keystone Display SubSystem. Version history: v2: no change v3: - Add ports node - Add includes to dts example - reindent dts example v4: - Add descriptions to reg and clocks properties - Remove minItems when its value is the same as maxItems value - Remove ports node v5: - itemize reg and clocks properties' descriptions v6: - Add Reviewed-by: from Rob Herring <robh@kernel.org> and Benoit Parrot <bparrot@ti.com> v7: no change v8: no change v9: - Remove ports-node from the dts example Signed-off-by: -
Qiang Yu authored
Increase driver version for mesa driver to identify the support of new heap buffer interface. Reviewed-by:
Vasily Khoruzhick <anarsoul@gmail.com> Tested-by:
Andreas Baierl <ichgeh@imkreisrum.de> Signed-off-by:
Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200116131157.13346-6-yuq825@gmail.com
-
Qiang Yu authored
Increase heap buffer backup memory when GP receive PLBU out of memory interrupt, then resume the task. Reviewed-by:
-
Qiang Yu authored
heap buffer is used as output of GP and input of PP for Mali Utgard GPU. Size of heap buffer depends on the task so is a runtime variable. Previously we just create a large enough buffer as heap buffer. Now we add a heap buffer type to be able to increase the backup memory dynamically when GP fail due to lack of heap memory. Reviewed-by:
-
Qiang Yu authored
For dynamically mapping added backup memory of lima_bo to vm. This is a preparation for adding heap buffer support. Reviewed-by:
-
Qiang Yu authored
From Mali r10p0 kernel driver source code. Reviewed-by:
-
- 25 Jan, 2020 3 commits
-
-
Jani Nikula authored
Use drm_core_check_all_features() to ensure both the driver features and the per-device driver features are taken into account when registering debugfs files. v3: - files[i].driver_features == 0 actually means "don't care" v2: - use drm_core_check_all_features() Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123124801.14958-2-jani.nikula@intel.com
-
Jani Nikula authored
Add new drm_core_check_all_features() function to check for a mask of features. All features in the mask are required. Redefine existing drm_core_check_feature() in terms of this function, using the drm_driver_feature enum for the parameter. v3: - add drm_core_check_all_features() (Thomas) v2: - fix kernel-doc (Ville) - add an extra variable for clarity (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
-
Nicolas Boichat authored
The datasheet suggests 60 for tHFP, so let's adjust the number accordingly. This also makes the framerate be 60Hz as intended: 159916.0 * 1000 / ((1200 + 80 + 24 + 60)*(1920 + 20 + 4 + 10)) => 60.00 Hz Signed-off-by:
Nicolas Boichat <drinkcat@chromium.org> Fixes: e6d020ee ("drm/panel: support for boe, tv101wum-n53 wuxga dsi video mode panel") Cc: Jitao Shi <jitao.shi@mediatek.com> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [added fixes tag] Link: https://patchwork.freedesktop.org/patch/msgid/20200125050256.107404-1-drinkcat@chromium.org
-
