- 13 May, 2022 40 commits
-
-
Tom Rix authored
In stk_camera_read_reg() a single byte buffer is alloc-ed and freed on every function call. Since the size is known, move the buffer to the struct stk_camera where it will be alloc-ed and freed once. Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Philipp Zabel authored
Let VIDIOC_ENUM_FRAMEINTERVALS return -EINVAL if userspace queries frame intervals for frame sizes unsupported by the encoder. Fixes the following v4l2-compliance failure: fail: v4l2-test-formats.cpp(123): found frame intervals for invalid size 47x16 fail: v4l2-test-formats.cpp(282): node->codec_mask & STATEFUL_ENCODER test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: FAIL [hverkuil: drop incorrect 'For decoder devices, return -ENOTTY.' in the commit log] Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
Set default colorspace to SRGB for JPEG encoder and decoder devices, to fix the following v4l2-compliance test failure: test VIDIOC_TRY_FMT: OK fail: v4l2-test-formats.cpp(818): fmt_raw.g_colorspace() != V4L2_COLORSPACE_SRGB Also explicitly set transfer function, YCbCr encoding and quantization range, as required by v4l2-compliance for the JPEG encoded side. Signed-off-by:
-
Yang Yingliang authored
The resource is checked in probe function, so there is no need do this check in remove function. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Yang Yingliang authored
The resource is checked in probe function, so there is no need do this check in remove function. Signed-off-by:
-
Yang Yingliang authored
The resource is checked in probe function, so there is no need do this check in remove function. Signed-off-by:
-
Christopher Obbard authored
Document the RK3328 compatible for rockchip-vdec. The driver shares the same base functionality as the RK3399 hardware so make sure that the RK3399 compatible is also included in the device tree. Signed-off-by:
Christopher Obbard <chris.obbard@collabora.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Fabio Estevam authored
The video viu driver is not a vital one for booting purposes. Remove the unneeded 'default y' option. Signed-off-by:
Fabio Estevam <festevam@denx.de> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Dorota Czaplejewicz authored
I tried to debug streaming in libcamera, where I stumbled upon this. I asked around on IRC where I was told that this statement in the documentation is wrong, so I'm submitting a removal. Signed-off-by:
Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm> Signed-off-by:
-
Lv Ruyi authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Signed-off-by:
-
Ming Qian authored
The typical behavior is to add all controls, then at the end check if hdl->error was set, and if so, v4l2_ctrl_handler_free is called and the error is returned. Signed-off-by:
Ming Qian <ming.qian@nxp.com> Signed-off-by:
-
Ming Qian authored
For some invalid frames, especially multiple consecutive invalid frames, they all can't be decoded, then the firmware can send picture skipped event to notify driver that some frames are invalid, driver can return them with error flag. Signed-off-by:
-
Ming Qian authored
copy the timestamp using the helper function V4L2_BUF_FLAG_TIMESTAMP_COPY To implement this, driver will keep the output buffer until it's encoded, in previous, driver will return the output buffer immediately after firmware return it Signed-off-by:
-
Ming Qian authored
copy the timestamp using the helper function V4L2_BUF_FLAG_TIMESTAMP_COPY To implement this, driver will keep the output buffer until it's decoded, in previous, driver will return the output buffer immediately after copying data to stream buffer. After that, there is no need to make a workaround for poll function. driver can use v4l2_m2m_fop_poll directly. Also, driver don't need to keep a input threshold as the buffer count is up to only 32. Signed-off-by:
-
Randy Dunlap authored
Fix build errors when RADIO_TEA575X=y, VIDEO_BT848=m, and VIDEO_DEV=m. The build errors occur due to [in drivers/media/Makefile]: obj-$(CONFIG_VIDEO_DEV) += radio/ so the (would be) builtin tea575x.o is not being built. This is also due to drivers/media/radio/Kconfig declaring a bool Kconfig symbol (RADIO_ADAPTERS) that depends on a tristate (VIDEO_DEV), so when VIDEO_DEV=m, RADIO_ADAPTERS becomes =y, and then the drivers that depend on RADIO_ADPATERS can be configured as builtin (=y) or as loadable modules (=m). Fix this by converting RADIO_ADAPTERS to a tristate symbol instead of a bool symbol. Fixes these build errors: ERROR: modpost: "snd_tea575x_hw_init" [drivers/media/pci/bt8xx/bttv.ko] undefined! ERROR: modpost: "snd_tea575x_set_freq" [drivers/media/pci/bt8xx/bttv.ko] undefined! ERROR: modpost: "snd_tea575x_s_hw_freq_seek" [drivers/media/pci/bt8xx/bttv.ko] undefined! ERROR: modpost: "snd_tea575x_enum_freq_bands" [drivers/media/pci/bt8xx/bttv.ko] undefined! ERROR: modpost: "snd_tea575x_g_tuner" [drivers/media/pci/bt8xx/bttv.ko] undefined! Link: lore.kernel.org/r/202204191711.IKJJFjgU-lkp@intel.com Fixes: 9958d30f ("media: Kconfig: cleanup VIDEO_DEV dependencies") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Pavel Skripkin authored
Syzbot reported that -1 is used as array index. The problem was in missing validation check. hdw->unit_number is initialized with -1 and then if init table walk fails this value remains unchanged. Since code blindly uses this member for array indexing adding sanity check is the easiest fix for that. hdw->workpoll initialization moved upper to prevent warning in __flush_work. Reported-and-tested-by: syzbot+1a247e36149ffd709a9b@syzkaller.appspotmail.com Fixes: d855497e ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18") Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
-
Niklas Söderlund authored
Remove a stray blank line between function definition and body. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Sebastian Fricke authored
Describe the coding tree unit as replacement for the macroblock in the HEVC codec. Highlight a key difference of the HEVC codec to predecessors like AVC(H.264) to give a better overview of the differences between the coding standards. [hverkuil: replaced the 'corresponds to' symbol with the full text for clarity] Signed-off-by:
Sebastian Fricke <sebastian.fricke@collabora.com> Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Sebastian Fricke authored
VP9 support has been added to the driver by commit f25709c4 ("media: rkvdec: Add the VP9 backend"). And the VP9 uABI was merged with commit b88dbe38 ("media: uapi: Add VP9 stateless decoder controls"). The remaining codec that keeps this driver in staging is HEVC. Update the TODO list accordingly. Signed-off-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by:
-
Sebastian Fricke authored
VP8 has been added to the uABI by commit 363240ce ("media: uapi: move VP8 stateless controls out of staging") VP9 has been added to the uABI by commit b88dbe38 ("media: uapi: Add VP9 stateless decoder controls") H264 has been added to the uABI by commit 46a309d2 ("media: uapi: move H264 stateless controls out of staging") The last remaining codec to be added to the uABI is HEVC. Highlight these changes in the TODO list. Signed-off-by:
-
Sebastian Fricke authored
Fix typos in comments within the Hantro driver. Signed-off-by:
-
Hangyu Hua authored
rga->m2m_dev needs to be freed when rga_probe fails. Signed-off-by:
Hangyu Hua <hbh25y@gmail.com> Signed-off-by:
-
Ming Qian authored
To support dynamic resolution change, driver should meet the following conditions: 1. the previous pictures are all decoded before source change event. 2. prevent decoding new resolution pictures with incorrect capture buffer, until user handle source change event and setup capture. 3. report correct fmt and resolution during source change. Signed-off-by:
Mirela Rabulea <mirela.rabulea@nxp.com> Signed-off-by:
-
Ming Qian authored
Refine code to support dynamic resolution change Signed-off-by:
-
Ming Qian authored
The GStreamer v4l2videodec only ever calls S_FMT on the output side and then expects G_FMT on the capture side to return a valid format. Signed-off-by:
-
Ming Qian authored
The decoder will save the precision that was detected from jpeg header and use it later, when choosing the pixel format and also calculate bytesperline according to precision. The 12bit jpeg is not supported yet, but driver shouldn't led to serious problem if user enqueue a 12 bit jpeg. And the 12bit jpeg is supported by hardware, driver may support it later. [hverkuil: document the new precision field] Signed-off-by:
-
Ming Qian authored
Refine code to support dynamic resolution change Signed-off-by:
-
Husni Faiz authored
This patch fixes "space prohibited before that ':'" checkpatch error in the switch statements. Suggested-by:
Husni Faiz <ahamedhusni73@gmail.com> Signed-off-by:
-
Husni Faiz authored
This patch fixes "switch and case should be at the same indent" checkpatch error. Signed-off-by:
-
Tom Rix authored
Clang static analysis reports this issue ispcsiphy.c:63:14: warning: The left operand of '<<' is a garbage value reg |= mode << shift; ~~~~ ^ The iface switch-statement default case falls through to ISP_INTERFACE_CCP2B_PHY1. Which is later checked to set the mode. Since the default case is left out of this check mode is never set. Instead of falling through and assuming a ISP_INTERFACE_CCP2B_PHY1 iface, return. Signed-off-by:Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Miaoqian Lin authored
The corresponding API for clk_prepare_enable is clk_disable_unprepare, other than clk_disable. Fix this by changing clk_disable to clk_disable_unprepare. Fixes: b4155d7d ("[media] exynos4-is: Ensure fimc-is clocks are not enabled until properly configured") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Signed-off-by:
-
Laurent Pinchart authored
The ceu_data_rz variable is unused when CONFIG_OF isn't set. This generates a compiler warning. Fix it. Signed-off-by:
Jacopo Mondi <jacopo@jmondi.org> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reported-by:
-
Dan Carpenter authored
We verified that "vpif_obj.sd[i]" is non-NULL on the previous line so no need to check here. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
The "bdisp->clock" variable cannot be an error pointer here. No need to check. Signed-off-by:
-
Jiapeng Chong authored
Eliminate the follow versioncheck warning: ./drivers/media/platform/stm/sti/c8sectpfe/c8sectpfe-common.h: 16 linux/version.h not needed. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Jacopo Mondi authored
The RDACM20 camera supports a single image format which is currently listed as MEDIA_BUS_FMT_UYVY8_2X8. As the video stream is transmitted on the GMSL serial bus, the 2X8 variant does not apply. Fix the format by using MEDIA_BUS_FMT_UYVY8_1X16. This fixes a runtime error which is now triggered as the MAX9286 deserializer implements .link_validate(). Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by:
-
Niklas Söderlund authored
Add a check to make sure the input interface (CSI-2 or parallel) allow for the requested input bus format. If not inform the user and error out rather then try to continue with incorrect settings. While at it add the missing define for RGB666 that is not yet supported in the driver but we can preemptively check for it in this context already. Signed-off-by:
-
Lukas Bulwahn authored
Commit 46fb9995 ("media: platform: place NXP drivers on a separate dir") moves various files in media/platform into a nxp subdirectory. It adjusts the section MEDIA DRIVER FOR FREESCALE IMX PXP in MAINTAINERS, but misses some references in NXP i.MX 8QXP/8QM JPEG V4L2 DRIVER and MEDIA DRIVERS FOR FREESCALE IMX7. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Adjust the file references in the NXP i.MX 8QXP/8QM JPEG V4L2 DRIVER and MEDIA DRIVERS FOR FREESCALE IMX7 sections. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
Laurent Pinchart authored
The v4l2_m2m_dev structure documentation incorrectly references the v4l2_m2m_unregister_media_controller() function when it actually means v4l2_m2m_register_media_controller(). Fix it. Signed-off-by:
-
Tom Rix authored
smb_word_op() has a parameter data_format that determines if the data is either a byte or word. From inspection, smb_word_op() is only used by the macros smb_wr16() and smb_rd16() both pass in CMD_WORD_DATA. There is no use of smb_word_op() that passes in CMD_BYTE_DATA. So remove the byte handling. Signed-off-by:
-
